Multi-colored block noise bug in Adobe Premiere - DV video

When I edit a DV video in Premiere 6.5 sometimes  the final DV video output will have this strange multi-colored blocks  that last a frame or two, and it will have a loud violent hiss right  there.  It's not in the original DV video, and it won't be in the same  place if I resave it.  I can't figure out what's causing it.  I blured  the logo in the bottom left corner, but it's fine.  It will look perfect  with the video screwed up behind it.  Anyone have any ideas what's  happening, or have you run into this before??

Anything that does that "once in awhile" and "not in the same place" is most often caused by TSR software running in the backbround
That TSR software is doing "something" to the hardware that is stealing a few clock cycles or polling the system bus... and that causes problems with Premiere
You need to check what else is running in the background, and stop it if at all possible
Also, This is aimed at Premiere Pro, but may help 
A link with many ideas about computer setup http://forums.adobe.com/thread/436215?tstart=0
Many of the ideas at the next link are generic enough they have helped some Non-Premiere users fix problems
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with the DETAILS asked for in the questions at the end of the troubleshooting link

Similar Messages

  • Adobe premiere cs6 video out haisy through blackmajic decklink card

    Adobe premiere cs 6 video out haisy through blackmajic decklink card in Mac OS X Lion (10.8)

    More information needed for someone to help... please click below and provide the requested information
    -Information FAQ http://forums.adobe.com/message/4200840
    Also, there is a CS6 Bug using "spanned" AVCHD files, but so far I am only filming in short segments (under 4 Gig per file) so do not have the problem described in http://forums.adobe.com/thread/1004369?tstart=0
    Finally, make sure you copy from camera to hard drive according to http://forums.adobe.com/thread/1015001?tstart=0
    -and http://helpx.adobe.com/premiere-pro/using/transferring-importing-files.html

  • Adobe Premiere Pro Video editing layer disappeared

    I was working with Adobe Premiere Pro and then the video editing layer disappeared, it left me with Audio editing layer tho.

    Try dragging down this line:

  • Adobe Premiere 8 - videos directly to YouTube more than 10minutes

    Adobe Premiere 8 doesn't allow me to share videos directly to YouTube bigger than 10 minutes.  How I reset this to allow videos up to 15 minutes according to the new YouTube file sizes.

    Welcome to the forum.
    In the short form of the answer, no.
    However, you can Export/Share, and then use your extended account to upload whatever your account allows. When PrE 8, and even PrE 9, were being coded, the limit was 10 mins. period. The extended/advanced accounts are fairly new. Perhaps PrE 10 will allow for longer files to be directly uploaded, but we will not know until about late September. By its release, YouTube might offer unlimited Duration, and PrE 10 will have been written for what existed, when it was engineered.
    Good luck, and sorry for the bad news. Still, that Export/Share and then Upload has worked for most users with the bigger accounts.
    Hunt

  • Adobe Premiere Pro Video Play Issue

    This is probably not an advanced question, but I'm having a lot of trouble finding an answer.  I'm trying to use Adobe Premiere, and I'm importing my video.  In the first screen, the top left video play area that I import my raw video into, I find that I'm getting a very choppy play.  The choppy play is making it difficult for me to time my cuts.  The screen image will freeze while the audio continues to play.
    When this happened initially, I assumed it was my hardware.  I was running what I considered to be a decent machine, but I figured I needed a better one.  So, I went and bought a better one.  Now I'm running a machine with a Quadro 3100 graphics card.  It's an I7, quad core, about 2.8 ghz if I recall correctly.  (It's supposed to be able to over clock or boost or something, but I don't know much about that stuff.)
    Anyway.  Is there some sort of setting I should be using?  Any advice would be really, sincerely appreciated. 

    John T. Smith,
    My apologies for not having provided more information.
    What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
    I'm using Adobe Premiere Pro 5.5, and I believe I just updated it to the 5.5.2.
    Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
    I ran the update this morning, which is why I believe I'm using the 5.5.2.
    What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
    Windows 7, and I believe it is Professional.
    What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
    These are Quicktime .mov files.  I'm afraid I don't have a lot of other information.  They are files that were transferred to my computer, but I wasn't around when they were initially done.
    If you are getting error message(s), what is the full text of the error message(s)?
    No error message.
    What were you doing when the problem occurred?
    The problem is consistent.
    Has this ever worked before?
    I've never seen it play smoothly.
    What other software are you running?
    Just typical Microsoft Office programs, and Chrome, and maybe Explorer.  But I rarely run anything else while I'm attempting to work in Premiere.
    Do you have any third-party effects or codecs installed?
    To my knowledge, no. 
    Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
    I'm using the MSI WT Series WT60 2OK 3K-615US 15.6-Inch Laptop (Black)
    Are you using Mercury Playback Engine GPU Acceleration?
    I do not know how to use this.
    Does the problem only happen with your final output, with previews, or both?
    It only happens to the raw footage and timeline footage.  The output is fine, assuming I can find the correct place to make the cuts.

  • Block noise in CC2014 Adobe Media Encoder Quicktime H.264 Export

    I would love some input from the community here. Perhaps someone else is having a similar issue.
    I've been wanting to make a full switch from CS6 to CC2014, but I am experiencing a host of issues that I don't experience in CS6. For one, when I export my Canon 5DMK3 DSLR timeline using Quicktime (H.264), I get an abrasive global noise all over my rendered video as if I was using a low data rate. I use the same settings in CS6 and experience no issues.
    Since YouTube compression hides these artifacts, so please download and view original file: Dropbox - RenderArtifactsQuicktimeH264.mp4
    Format: Quicktime
    Video Codec: H.264
    Quality: 100
    23.976fps
    progressive
    Use Max Render Quality
    Render at Maximum Depth
    10,000 kbps
    What I've tried:
    1) exporting at 720p and 1080p
    2) another codec (H.264 mp4 exports are clean)
    3) all combinations of the "Use Max Render Quality" and "Render at Maximum Depth" settings
    4) exporting straight from Premiere
    5) rendering with and without effects (Magic Bullet Looks, sharpening)
    6) GPU (CUDA) enabled and software only (on project and on Adobe Media Encoder)
    Custom Desktop Specs:
    Intel i7-3960X @ 3.3GHz
    32GB RAM
    GTX 780 Ti 3GB (and tested Adobe certified regular GTX 780 3GB)
    GPU Driver: 340.52 (up to date)
    Windows 7 Professional 64 bit
    SSD OS drive
    WEstern Digital 2TB data drive
    SSD adobe cache drive
    I'm at a complete loss. What else could be contributing to this?

    Hi Mark,
    I did install the CC 2014.0.1 update and the issue remained. I had a colleague tell me that he experiences the same issue for Format= Quicktime, Codec= h.264 when he has the "limit data rate" option checked with a value. When I unchecked the limit data rate (of my standard 10,000 kbps 720p preset) I got a clean render devoid of the previously mentioned artifacts. However, it defaulted to a 70,000 kbps data rate which of course is higher than I'd like/need. For now I guess I'll be exporting .mp4 h.264, but I'm still curious why the limit data rate doesn't behave like it did in CS6.

  • Adobe Premiere 7 video turns blurry / pixilated upon export.  How do I get a high quality export?

    Hello.  I am editing a video in Adobe Elements 7.0.  The footage is standard definition.  I am ready to export the video, but when I do this the video comes out blurry or pixilated looking.  The footage looks clear when I am actually editing it, but when I export it something goes wrong.  I need one export in Flash (which will later be posted on the web) and one export as a Windows Media File or MPEG so it can be viewed internally on our office computers.  I have played with copious settings, formats, compressions, etc.  How do I export non-blurry, high quality, clear videos? 
    Thank you so much for your time and consideration.  I really appreciate it. 

    Hi Mr. Hunt!  Thank you so much for responding.  I really appreciate it.
    What is my project preset?  That's a great question.  My settings are:
    General:
    Editing Mode: DV NTSC
    Timebase: 29.97 frames per second
    Video:
    Frame Size: 720 horizontal x 480 vertical
    Pixel Aspect Ratio: D1/DV NTSC (0.9)
    Fields: lower field first
    Display format: 30fps drop frame timecode
    Title Safe Area: 20% horizontal and vertical
    Action safe: 10% horizontal and vertical
    Capture:
    Capture Format: HDV Capture  (Footage/tape is SD, camera is HD, does this impact anything?)
    Video Rendering:
    Maximum bit depth - box is NOT checked
    Previews:
    File Format: DV NTSC
    Compressor: DV NTSC
    Color Depth: millions of colors
    Optimize stills - box IS checked
    Footage is shot on a Canon XHA1 Hi-def camera, but on standard definition tapes.  Footage is shot drop frame.
    Does that answer your question?  If not, where would I go to find my presets?
    I'll have to check out MS Windows Media Encoder.

  • Adobe Premiere : Editing Video in Text

    How do you edit video in text on Premiere Pro?
    I did this in Adobe Element - both the newest versions (2014) using black video, Track Matte Key and inverting them with a Title, like so  15 seconds in
    Real Talk Teaser: Sean White - YouTube
    Now I've switched to Premiere Pro and am trying to replicate my titles, but to no avail. I can't get the text to cut out to transparent to reveal the moving video below
    I've tried using  a Set Matte,
    tried using a Luma Key with Alpha Channels,
    tried a Title with a black background fill,
    or one without over black video,
    inverting Mattes,
    tried cutting/copying a clip of the video to place on Video 3 instead of just putting the Title over Video 1
    and on all three Video channels ...
    Tried Adobe/non-Adobe video tutorials and the Adobe reference.
    I don't know what I'm missing. Thoughts?

    Hi Tash B,
    Here you go:
    Create text and place it on the track above the video clip you want to show inside the text.
    Apply a Travel Matte Key effect to the video clip.
    In the Effects Control panel choose Matte > Video 2, Composite Using > Matte Alpha
    Hope that helps,
    Kevin

  • How to use itunes music into adobe premiere elemesnts video

    I want to use my itunes music into a adobe video.
    How can I transform the itunes music so I can use into the abode video?

    Try to use instructions for consolidating library from here, see if that helps. At some point I have noticed, especially with huge library it gets hard for itunes to keep information about different locations, unless you have external drive plugged permanently.
    http://support.apple.com/kb/PH1459
    http://support.apple.com/kb/ht1449

  • Help!  My Adobe Premiere Elements Video is Horizontal, Can you help?

    I took a video of a native dancer, Unfortunately, when played the native dancer is horizontal.  is there a fix to rotate the video just as one can rotate a photo?

    ceasefortea
    In Premiere Elements 10 Windows
    a. highlight your video on the Timeline of the Timeline view
    b. click on Properties icon above Timeline to open Properties Palette. (Could also open Properties Palette via Window Menu/Properties)
    c. In Properties Palette/Motion Panel Expanded, use the Rotation feature there to rotate your video.
    Please let us know the outcome. We will fine tune the details as necessary, but I think that the above should do the job.
    ATR

  • Adobe Premiere ACA Video Communication Exam?

    Has anyone taken the entry level exam?  I can do everything in the exam with ease, but missed the cut by two questions and have been having problems finding anything of value to use as a suitable guide.  The exam prep materials on from Adobe aren't helpful.  Anyone with thoughts or suggestions, that would be great.
    Thanks

    Welcome to the forum.
    As your system setup will likely be much different from that of Konrad's, I would start a new thread, and in it, list the full system in detail, as Konrad did. This ARTICLE will give you tips on the info that would be very useful.
    In Konrad's case, the C:\ was filled to about capacity, so could well have been a contributing factor. That is why full I/O specs. will be very, very useful.
    Good luck,
    Hunt

  • Adobe Premiere - blurred video when convertering from MOV to AVI

    Hey!
    When I exporting my video I made with my iphone (.MOV) to .AVI then the videos quality gets worse that it should be.
    What does that depends on and what can I do to fix it?

    What does that depends on and what can I do to fix it?
    The phone. Don't use the phone to change the wrapper. Use a converter or better yet, use a video camera. Use a phone to make calls.

  • Adobe Premiere Elements 12 conflicts with McAfee HIPS 8

    Does anyone have information on the bug in Adobe Premiere Elements 12 causing the application to crash when McAfee HIPS 8 is installed and enabled? Will this bug be fixed in a later release? I included the McAfee KB article related to this issue below. Thanks.
    https://kc.mcafee.com/corporate/index?page=content&id=KB82144

    McAfee kills the program http://forums.adobe.com/thread/1460089?tstart=0
    This is an open forum with "some" Adobe staff participation, report bugs at this link
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for feature requests or bugs

  • Flooring pictures in adobe premiere pro

    For my company we need to make nice pictures for clients, where on the adobe website could you download the adobe premiere pro

    Here:
    Video editing software | Download free Adobe Premiere Pro CC trial

  • I need a Video Card for Adobe Premiere Elements, what is recommended?

    I wish to buy the Adobe Premiere Elements Video Editing. I shoot on a Cannon GL1 & GL3 mini dvd and need a video card to capture my video footage. What Video Card is recommended for use with the Premieire Elements software? and what is the price? Please advise...

    farney1946
    Is the purchased Premiere Elements 12 still in its sealed packaging?
    If you have not already, I would suggest that you install Premiere Elements 12 from the purchased installation disc
    and evaluate its performance in your computer environment.
    a. Does the program fail to install?
    b. Do you get Display Card errors?
    If you are worried about not being able to return 12 once the package is opened, then you can try the following
    a. Download the Premiere Elements 12 tryout files from the following web site and evaluate it as a tryout (full
    featured).
    http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
    Read and carry out carefully the Note: Very Important Instructions section on the web page to avoid Access Denied message.
    b. If the tryout performs well for you, then delete the tryout and install your purchased version with the purchased
    serial number included on the packaging.
    ....other possibilities, but just the above for now.
    ATR

Maybe you are looking for