Multi mapping and message splitting in BPM

Hi ,
I am working with this scenario ...
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
how many message interfaces i have to create .
one outbound , one abstract  and two inbound .. is it correct.

Hi
Minimum you need to create three message interfaces i.e. Bpm_In_MI_Abstract,  aBpm_Out_MI_Abstract Bpm_Out1_MI_Abstract, because abstract interfaces can be use inbound and outbound as well.
You can also use create implement it by using inbound and outbound message interfaces. In that case you have to use three additional interfaces(1 outbound and 2 inbound).
Regards
Sami
Reward points if helpful.

Similar Messages

  • Multi-Mapping and Message Split using BPM

    Hi All,
    Could anyone pls let me know clearly how message mapping can be done for this weblog
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    Thanks,
    Ram

    Hi,
    When you are doing Message mapping after adding the Messaget types for source and target messages. You can click on the "" button in the target message and add one more tab. You can go to Message tab as shown in the 5th image and click "" button to add one more message type. Then do the mapping as usual.
    <b>Based on the value of the element(name), the node of input(details)should be directed to one of the two message types</b>
    Here in this blog it is done based on the Name.
    You need to use IFTHENELSE boolean function and do the mapping.
    Thanks,
    Prakash

  • Multi-Mapping and Message Split using BPM UDFs Error

    hi
    As per the below blog
    Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure
    I have just modified the UDFs(1.selectnodeifA 2.selectNodeifB)
    1.selectnodeifA
    for(int i=0;i<=n;i++)
    if(Name<i>.equals("A"))
    result.addValue(Node<i>);
    2.selectNodeifB
    for(int i=0;i<=n;i++)
    if(Name<i>.equals("B"))
    result.addValue(Node<i>);
    while checking I am getting the following errors
    Source code has syntax error: 
    D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:132: cannot resolve symbol
    symbol : variable n
    location: class com.sap.xi.tf._bpm_mm_
    for(int i=0;i<=n;i++)
    ^
    D:/usr/sap/D10/DVEBMGS01/j2ee/cluster/server0/./temp/classpath_resolver/Mapdc8fa4d0896011dd907d001cc01cef0d/source/com/sap/xi/tf/_bpm_mm_.java:140: cannot resolve symbol symbol : variable n
    location: class com.sap.xi.tf._bpm_mm_
    for(int i=0;i<=n;i++)
    ^
    2 errors
    The source code given in the blog is correct ? I thought for loop has not completed
    pls help
    manian

    Hi manian,
    I was having a look to Illustration of Multi-Mapping and Message Split using BPM in SAP Exchange Infrastructure blog.
    The functions are not the same. I mean, yours and blogs functions.
    Each function has two parameters, Name and node. Furtheremore, in the blogs' functions is using arrays and you don't.
    So, the right code will be
    1.selectnodeifA
    for(int i=0;i<=node.length();i++)
    if(Name<i>.equals("A"))
    result.addValue(Node<i>);
    However, if you don't need an advance user defined function as you want to process just one element of the node's queue, you will not need to use for sentence.
    Something like:
    1.selectnodeifA
    // for(int i=0;i<=n;i++)
    if(Name.equals("A"))
    result.addValue(Node);
    Hope it is usefull for you.
    Carlos

  • Message Split using BPM for Multiple SOAP Receivers

    hi,
    I have a scenario where in i have to split the message coming from IDOC(SOURCE) to multiple SOAP(TARGET) receivers through BPM
    I took a single file as a scenario and tested it. It worked fine.
    I am using only a single output interface.
    I have followed this weblog
    /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    but this blog has 2 output interfaces whereas in my case i just only one output interface that i want to route to multiple receivers based on the value in the PARVW in the IDOC.
    Thanks,
    Tirumal

    hi ,
    this is done using CONDITIONAL RECEIVER DETERMIANTION.
    While doing your reciver determiantion, you can specify multiple receivers and also specify the condition on which the receiver is to be choosen.
    Also, just check the last path of this blog for the same,
    /people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
    Regards,
    Bhavesh

  • Message Splitting Using BPM

    Hi Folks,
        I'm new to SAP PI 7.0 . I want to send one xml file to 2 sender in a splitted manner using BPM. suppose I have 8 fileld in my sender data type, i want to send the xml which contails first 4 fileds to the first receiver and
    the xml which contails second 4 fileds to the second receiver.
         Can anybody help me in this case.I have already looked for the already answered threads but i didnt get any help from them.
    Thanks & Regards,
       Santosh Kumar Nayak.

    Hi,
    Check this blog: /people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
    From the blog:
    Three Receiver Determinations are required. One for the Sender to BPM and two
    others for BPM to the corresponding output files. In the Interface Determination for the
    two Receivers, specify the corresponding Interfaces.
    Same logic applicable to your case.
    Regards,
    Abhishek.

  • Multi-mapping with message bundling but without using BPM

    Hi all,
    I have a requirement to bunch specific no. of records (say 50) from source message and create separate target messages for those bunches. For example, if the source message has 120 records, then there should be three separate target messages created containing 50, 50 and 20 records each.
    I am wondering whether this multi-mapping is possible without using BPM, as the typical no. of records in the source message are in the range of 600 to 800, and rarely (twice or thrice a month) they shoot up to 2000. So my concern is whether BPM would affect the performance. We are using PI at SP12.
    Regards,
    - Shankar.

    Sorry for late reply.. Well the sender is a file system, which sends a single XML file containing multiple records. (I mean I have a sender file adapter that polls periodically from a specific path and picks up the file when it is available)
    The no. of records in the source file may be different in each run. The requirement on the receiver system is that it can handle a file which has maximum of 'n' records only (say 50 in my example)
    Now the sender file can contain any no. of records. It may contain 10 on some day, or 200 the next day, or 120 on the third day. But on the receiver side, I want the files to be created such that each will contain AT MAX 50 records.
    So, if source file has <=50 records, then there will be only 1 target file having the same no. of records.
    If source file has between 51 to 100 records, then there will be two target files. One will have 50 records, and the second will have remaining records.
    And so on..
    Regards,
    - Shankar.

  • Mapping-based message splits in PI7.0

    We have developed an integration scenario on XI 3.0 that uses mapping-based message splits (1:n transformation without BPM). This is available since SP14 I think.
    Now we want to upgrade to PI 7.0: Are mapping-based message splits a standard feature of PI 7.0 or do we need a certain SP as well?

    Hi,
    It should be available with Pi 7.0 with default
    And also compare the SP's and do finalization
    in 2004 - in 2004s
    SP12 & < - SP04
    SP13 + 14 - SP05
    SP15 - SP06
    SP16 - SP07
    SP17 - SP08
    SP18 - SP09
    Xi's Latest SP is SP 21 and PI's is SP 14
    Regards
    Seshagiri

  • Multi-Mapping and Dynamic Configuration

    Hello,
    Is it possible to use dynamic configuration in mulltip-mapping? (message split?)
    in a  proxy-mail scenario I am using a multi-mapping. The message gets splited by a specif field.
    (Field of source message-SplitByValue(Value Change)-CollapseCOntext->Target Message(1..N)
    WIthin the graphical mapping I have a dynamic configuration for the "Mail Subject"
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey keySubj = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/Mail", "THeaderSUBJECT");
    conf.put(keySubj,  pSubject);
    return pSubject ;
    I have mapped this field to a field in the target message.
    The messages are being splitted as expected and the value of pSubject is also correct.
    BUT when receiving emails the subject field has the same value for all splitted messages.
    My Question is "conf.put(keySubj,  pSubject);" overwitting all splitted outgoing messages?
    Thanks for the Help
    EMW

    As stated in http://help.sap.com/saphelp_nw70/helpdata/EN/43/09b16006526e72e10000000a422035/frameset.htm
    Adapter-Specific Attributes and Multi-Mappings
    In multi-mappings, there are multiple message headers with adapter-specific attributes. The mapping API can only access one message header. This has the following consequences depending on whether there are multiple source or target messages:
    ●     1:n Transformation
    If there are multiple target messages, the header for the adapter-specific attributes is copied for each message. This means that you can only create one header for all adapter-specific attributes, and not individual headers.
    ●     n:1 Transformation
    This variant is only possible for multi-mappings in integration processes. If there is more than one source message, read-access to the adapter-specific attributes of the various message headers is not possible at runtime.
    ●     m:n Transformation
    All afore-mentioned restrictions apply here. Developers can at most write the same adapter-specific attributes for all target messages to the header, without read-access to the attributes of the source messages. m:n transformations are only supported within integration processes.
    Regards,
    Henrique.

  • Message split using BPM.

    Hi SDNers,
         My Scenario - Multiple IDocs to 3 output messages. Mesg1 1:1, Msg2 0:1, Msg3 0:1
         We are using BPM to acheive this.
               I am doing message split using BPM. But I have a problem when I am using BPM.
         My requirement is to collect the Idocs for 1 minute, this I acheived by using deadline branch and collecting idocs using container. After that I used Transformation step to run interface mapping by which message is splitting into three messages. Upto this I acheived successfully, then after I got strucked to split the message.
         I am using fork step and and giving three branches, in each branch I am giving receive step and collecting the transformed message. My problem is the message in the first branch is mandatory to come, where as the messages in the remaining two branches are not mandatory. That is my message can split into three messages or just one.
         If I use fork step, without getting the message in all the three branches, the messages in the branches will not come out. Which is not satisfying my requirement.
         I am thinking that before receive step in fork, can I use wait step for 1 minute or can anybody explain what is the functionality of necessary branches.
         Thanks in Advance.
    Regards,
    Jayaram.G

    Jayaram.G,
    To send the messages in your fork, you need a send step instead of a receive step.
    I think you also need to insert a switch in al of the fork's branches, so that the messages will ony be sent when the transformation produced the message. (use the expression [message] EX in the switch).
    Kind regards,
    Koen

  • Message split via BPM Status stays TBDL

    Hi to all,
    I have a Scenario with a BPM.
    In the IntegrationProcess (IP_Split), is a mapping with message splitting.
    The result von the Mapping are serveral Proxymessages and a var count, that counts the new Messages.
    After, i have a loop over the messages an with the receiverdetermination i send the new messages to the SAP-System.
    the Scenario works fine. in SXI_MONITOR it looks great.
    There is only one Problem:
    When i go to the Integration Engine in the Message Monitoring (Runtime Workbench) there is a strange Message.
    There is a Message with SenderService and ReceiverService IP_Split. The Status is still TBDL.
    Can anybody help me?
    Thanks
    Chris

    Hi,
    Few months ago we had also problems with "locked user" in XI, in our case XIAPPLUSER was sometimes (b)locked.
    Perhaps note:
    721548 Changing the passwords of the XI 3.0 service users
    will help you.
    We removed and entered the service users again, with the password in CAPITALS and language blank.
    After that our problem was solved, I hope yours too.
    Regards
    Jack

  • Multi-Mapping in IDOC without using BPM ?

    Hi ,
    Please check ..
    Can below given blog can be used to achive Multi-mapping in IDOC without using BPM ?
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
    Regards
    PS

    Solved .. Thx every one .
    Approache Used :
    1. Created mapping  with Change signature on target Message type(idoc) with 1..N Occurence.
    2. Operation mapping with change Occurence on Target Operation(1..Unbounded) .
    3. Used same Operation mapping in Interface Determination with 0..unbounded(Multiplicity).

  • Hi , friends pls explain abap mapping and message mapping

    1) pls explain abap mapping and message mapping
       send me screen shorts also.

    Hi
    Mapping Techniques
    XI provides 3 standard ways of interface mapping between source and target.
    Graphical mapping
    Java Mapping
    XSLT Mapping
    Two more additional mapping types can be activated in XI by making changes to the exchange profile. Those two mappings are
    ABAP mapping
    XSLT mapping with ABAP Extensions
    Graphical Mapping
    Graphical mapping is a common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It hardly involves coding. (Exception - User defined functions). But sometimes with graphical mapping it is difficult to produce required output. For example ... text/html output, namespace change, sorting or grouping of records etc.
    ABAP Mapping
    A person comfortable with Object Oriented ABAP can go for ABAP mapping instead.
    Java Mapping
    Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
    SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
    XSLT Mapping
    One can also think of Java mapping as another option but it is a bit complex and required knowledge of Java. In such cases, XSLT mapping can be the best approach to meet the requirements.
    A few example cases in which an XSLT mapping can be used:-
    When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
    When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
    When data is to be filtered based on certain fields (considering File as source)
    When data is to be sorted based on certain field (considering File as source)
    When data is to be grouped based on certain field (considering File as source)\
    Advantages of using XSLT mapping
    XSLT program itself defines its own target structure.
    XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
    XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
    File content conversion at receiver side can be avoided in case of text or html output.
    Multiple occurrences of node within tree (source XML) can be handled easily.
    XSLT can be used in combination with graphical mapping.
    Multi-mapping is also possible using xslt.
    XSLT can be used with ABAP and JAVA Extensions.
    Disadvantages of using XSLT mapping
    Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
    Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
    XSLT mapping requires more memory than mapping classes generated in Java.
    XSLT program become lengthier as source structure fields grows in numbers.
    XSLT program sometimes become complex to meet desired functionality.
    Some XSL functions are dependent on version of browser.
    Different types of Mappings
    MAPPING SUPPORTED BY XI
    Message Mapping -> Graphical Design and testing environment. Default Provided By XI. Queue based modelling allow handling or large documents. Extensible via user defined functions
    XSLT Mapping - > Based on openstandard, Portable across application platform, Extensible using user defined functions kewl but disadvantage is Memory overload while handling large documents.
    SAX -> Simple Api For XML. -> Allows you to parse through a XML document. Doesn't consume any memory. But the message can be parsed only once from top to bottom. It Has evolved by contributions made by group of ppl itz a open architecture.
    DOM -> Document Object Model -> Itz designed by W3C. Consumes Memory as the message will be loaded. Allows parsing of document in both way top down and bottom up.
    Send me your email id.Shall send you very good docs for both ABAP Mapping and message mapping.
    Thanks

  • XI 7.0 passing attributes between java mapping and message mapping

    Hi all,
    Here's a newbie question. There is a scenario where an interface mapping has several stages of java mapping and message mapping
    I would like to know how to set attributes in the java mapping so that it can be accessed in a message map (or vice versa). What I intend to do is pass some information from one mapping to the other so that action can be taken based on the values passed.
    Thank you!

    Another option is storing the values in the message header in the same way as the Adapter-Specific Message Attributes:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
    Just use your own name/namespace combination, which is not used in any adapter.
    If possible use the way that Sandro proposed and add the information which you need to additional tags in the payload.
    Regards
    Stefan

  • Idoc(receiver) message splitting using BPM

    Hi,
    could you provide some blogs which is useful for Idoc (as a Receiver) message splitting (1:N scenario) using BPM.
    I have gone thru some of the Blogs, i didn't find good one according to this scenario.
    Thanks
    Praba

    Hi Michal,
    Thanks for ur reply.
    You said " if you have one message and want to have multiple IDOCs
    there is no need for a BPM -
    you just need to change IDOC occurance - that's all"
    I agree to your point.
    My scenario is more or less same but "With single message , i need to generate multiple Idocs" based on synchronous proxy response from R3. That is the reason we already gone with BPM.
    Already i used the BPM in my interface due to req.  It was working. Earlier i was posting single Idoc to R3 with multiple Header segment (each Header segment has one quantity)
    Now due to req. change, for each single quantity (quantity is my source Message Type field), i need to post single Idoc to R3  if i get response from R3.
    My XI version PI 7.0 SP14
    Idoc structure:
       <xsd:attribute name="SEGMENT" type="xsd:string" fixed="1" use="required"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
       </xsd:complexType>
    - <xsd:complexType name="WPUWBW.WPUWBW01";>
    - <xsd:annotation>
       <xsd:documentation>POS interface: Upload goods movements</xsd:documentation>
       </xsd:annotation>
    - <xsd:sequence>
      <xsd:element name="EDI_DC40" type="EDI_DC40.WPUWBW.WPUWBW01"; />
       <xsd:element name="E1WPG01" type="WPUWBW01.E1WPG01"; minOccurs="0"
       maxOccurs="9999999999" xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
       </xsd:sequence>
       <xsd:attribute name="BEGIN" type="xsd:string" fixed="1" use="required"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema" />
       </xsd:complexType>
       </xsd:schema>
    Already I am using this Idoc structure in various interfaces also. If i edit the occurance of the this Idoc and import in External definition with same name, I feel it afffect mapping in other interfaces also.
    Inputs are highly appreciated.
    Edited by: Prabaharan Rangasamy on May 22, 2009 4:14 PM

  • Message splitting in BPM ?

    Hi Guys,
    I have a proxy-soap scenario and i am using BPM to handle the asynchr-synchronus messages.
    The request coming into xi has multiple transactions in a single xml file and i need to split them into individual transacrions.
    I have created a multimapping and i am able to see a seperate messages for each individual transactions. I tried this inititaly with out BPM and able to see all the seperate messages.
    when i use the same mapping in a Transformation step in BPM i am able to see sepeate messages for each transaction but all the messages has the data of the last transaction.
    any help would be appreciated
    Thanks,
    srini

    Hi Raj,
    I have imported the wsdls both for the source and the target and once i have changed the occurance of the target from 0 to unbound the node Messages and Message 1 are added on the top for both the source and target.
    you have previously replied to this concern and said at run time they will be removed and the incoming request mathches with the original wsdl.
    I have tested this mapping with out BPM and i am able to see all the individual messages for each transaction seperately. Now i am using the same mapping in the BPM in a Transformation step and i see 3 messages but all of them have the data of the last transaction.
    Thanks,
    srini

Maybe you are looking for

  • Cannot preview PDF

    I have Acrobat 7.0 Professional along with the LiveCycle Designer. When I want to preview my form the "PDF preview" under view and the layout editor is greyed out. How can I get it to function.

  • Scans are pink and lined

    I have a printer I've rarely used. Printer seems fine. Go through ink like crazy. When I try to scan anything, the entire page is VERY pink and there are many vertical lines. I've have tried all the trouble shooting I know to do. I've uninstalled and

  • Moving iTunes library from external HD to MacBook Pro

    Ok, so a while ago, my iTunes library had grown so large I was running out of space on my Mac, so I moved all the files to an external HD. Of course, I could only listen to my music (as well as sync my iPhone and iPod) with the external device plugge

  • SUS - updates copied and enabled, clients won't pull them

    My SUS is set to copy and enable all updates automatically, and it's working fine. I have my client machines set to pull updates from the SUS (confirmed by the server name in the software update title bar), but every time I run it, it says no updates

  • Pink hue on external projectors

    I have searched throughout this forum and cannot find any suggestions. Please guide me. I have found recently that when I plug into external projectors I get a pink hue. It happens on virtually all projectors I use now. Originally, it worked fine. I