Multi monitor shows swapped names

I got a strange situation. I started looking into color management and run into a problem.
I have a laptop with a ATI HD5470 vidoe adapter. I have the laptop minitor and I have an external minitor Samsung SyncMaster 206BW.
When I look in the Screen Resolution window it shows that 1 is my laptop screen and two is te external monitor.
Looking at the description of the monitor for 1 it tells: Monitor of laptop, for 2 it tells SyncMaster.
So far so good.
But when I select Laptop monitor (1) and going into Advanced Settings the window what pops up shows me the details of the SyncMaster monitor.
Going back to the main menu and selecting SyncMaster (2) and selecting Advanged Settings than I got a popup window of the Laptop monitor.
When I go to the Color Management settings window I see the same swap.
How can I get this correct??
Thanks in advance,
Hans Smits

Hi Hans,
It's indeed too strange.
Let's try to disconnect them from computer and uninstall them from Device Manager:
1. Unplug the monitor cables.
2. Right click Computer, select Manage.
3. Click Device Manager in the navigation pane of the left, extend the
Display adapters.
4. Right click them one by one and click Uninstall.
After that, reinstall them again and keep the latest drivers for test.
Karen Hu
TechNet Community Support

Similar Messages

Multi monitor cursor swapping

I've got three monitors lined up and I'm looking for a way to instantly center the cursor on a specific display to avoid dragging it everywhere. I know there's a software called Multi Monitor Mouse for Windows which is supposed to handle that pretty well. So do you guys know a corresponding software or script for mac or is it possible to run the win. app in OS X via 3rd party software?
/Erik

Is the question clear or should I rephrase it?
I need a keyommand to move the cursor from one screen to another.

Multi-Monitor PSE 9 Corrupt Display

Multi-Monitor PSE 9 Corrupt Display
Evening all -
First post here at PS Gurus. I hope that you guys can lend your expertise in pinning down an issue that I am having and have also had on other PS versions. I am running
Windows 7 (64 bit) Ultimate
2600k / 8 gb ram / 256 Samsung SSD / 460 GTX 1GB
Matrox Triplehead 2 Go with x3 22" monitors (resolution 5040 x1050)
A fresh install of the trial version of PSE 9 is yielding corrupt main toolbar and options bar (for each tool selected). The application is expanding full screen on all three monitors just fine but the toolbar are corrupt - partly transparent / party compressed to the left. No matter what I have done in terms of resizing the application window the results are the same or get worse.
On another computer I installed PS CS5 (also under win7 64 bit environment) and I was having the same issue. However, at the time I thought the install was bad in some shape or form so I dropped the issue.
I am now considering PSE 9 but see that Win7 + Matrox just isn't working correctly with this combination of hardware / software components.
Has anyone see this issue or know of a potential fix? I have read a couple of threads on the net with similar issues but I don't see any resolution. Your help is greatly appreciated.
Thanks-
Benjamin

My main reason for testing PSE-O 9.0 was to find out if this "bug" was fixed. I can not use PSE-O to organize and show pictures the way I want to with this weaknes in place. Your answer is probably correct, bun not at all helpfull.
So thank you for trying, but my test of PSE O is over for now.
Does anybody out there know of other products that will do the trick?

Uix 2.2.8 multi monitor related bug

Hi,
I have a multi monitor system, on the seconnd screen, there is the browser , showing a page which has a Date Picker and a LOV. If I click on one of the icons, the window opens, and then all of a sudden jumps to the first screen with IE, with Mozilla it already opens on the first one. Same screen would be nice though.
Bye Jan

Hello Jan,
In the UIX javascript code the newly opened window's coordinates are checked to make sure it is not partially off the screen. If so, the window's coordinates are adjusted to put it on the screen.
I think there is a bug in IE which doesn't treat the multi-monitors as a single monitor, or something like that. Unfortunately, I doubt we can do anything about this.
Are you saying it works in Mozilla, correct?
Thanks,
Jeanne

Multi-monitor SW is affecting VMware performance on Helix

I have discovered that running multi-monitor software like Matrix desktop management is affecting the VMware Workstation 10 guest performance so drastically that virtual machines become literally unusable. Similar experience is reported by other people using different multi-monitor software like DisplayFusion, see https://communities.vmware.com/message/2315099#2315099
ThinkPad W520, i7-2820 CPU, 32GB RAM, NVidia Quadro 2000M 2GB GPU , mSATA Samsung Evo 840 1TB + 2x Samsung SSD EVO 840 1TB & Lenovo Helix i7 8GB RAM & ThinkPad W540, i7-4800MQ, 32 GB RAM, NVidia Quadro K1100M, OS on M.2 2242 Transcend MTS400 256GB + 2x Samsung SSD EVO 840 1TB

Ray, it will do a lot more good if you file an official bug report at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Be sure to describe the configuration in extreme detail.
Peter

ATI card + OS driver + multi monitor

Hello everyone,
I'm stuck configuring the RadeonHD drivers for multi monitor setup. The system starts with both screens cloned; logging in is in clone mode too. After that the second display is being turned of (no signal). Using xrandr --auto will enable the second display to life and clones the sreen again. xrandr --output DVI-I_1/analog --left-of DVI-I_2/analog will create a big desktop only the second display can only be used for a half screen mouse will go further anything else will not.
I've started with a autogenerated, by xorg, xorg.conf file and tweaked to the one below
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
DisplaySize 1440 900
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
DisplaySize 1680 1050
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-I_1/analog" "AL1916W"
Option "monitor-DVI-I_2/analog" "AL2016W"
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
# Monitor "AL1916W"
SubSection "Display"
Depth 24
# Virtual 3840 1920
EndSubSection
EndSection
My Xorg.0.log shows the line (WW) RADEONHD(0): Option "monitor-DVI_I_2/analog" is not used wich puzzles me!
Information:
X.Org X Server 1.7.1.901 (1.7.2 RC 1)
xrandr program version 1.3.2
Server reports RandR version 1.3
xf86-video-radeonhd 1.3.0-1
If more information, from Xorg.0.log or anywhere else, is needed just ask....
Thanks in advance,
Arjan Gelderblom
Last edited by Bloged (2009-12-14 10:02:05)

Sorry for the delay, but I was away for the weekend!
Andrwe wrote:Please try setting the bigger one monitor right-of the small one.
xrandr --output DVI-I_2/analog --right-of DVI-I_1/analog
This doens't change much except that now the smaller monitor has the problems!
litemotiv wrote:try using xf86-video-ati instead of radeonhd. i tried to get xrandr working for over a week having exactly the same problem, ultimately switched drivers and had everything set up in ~10 minutes.
Changed to ati instead of the radeonhd drivers still gives the same error!
Eratosthenes wrote:
I think you need to set a valid virtual size in your xorg. I think the one you have commented out is too large.
Mine is:
Subsection "Display"
Virtual 3200 1200
EndSubsection
Changed see new xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
# Load "dbe"
# Load "dri2"
# Load "extmod"
# Load "dri"
# Load "record"
EndSection
Section "Monitor"
Identifier "AL1916W"
VendorName "Acer"
ModelName "AL1916W"
EndSection
Section "Monitor"
Identifier "AL2016W"
VendorName "Acer"
ModelName "AL2016W"
Option "RightOf" "AL1926W"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # 
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "AudioStreamSilence" # [<str>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
#Option "ForceLowPowerMode" # [<bool>]
#Option "LowPowerModeEngineClock" # 
Option "monitor-DVI-1" "AL1916W"
Option "monitor-DVI-0" "AL2016W"
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV710 [Radeon HD 4350]"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "AL1916W"
SubSection "Display"
Depth 24
Virtual 3120 1050
EndSubSection
EndSection
Andrwe wrote:BTW could you please sent teh log, maybe there is something you may have missed.
Because of the switch to ati from radeon the log is different now... but here it is: http://pastebin.com/m77d0ea0b
This one at least shows that my seccond monitor is connected which failed in radeonhd!
Thanks for all the help,
Arjan Gelderblom
Edit: changed topic title to have it apply better to it's content
Last edited by Bloged (2009-12-14 10:02:47)

Mouse pointer is unchangeable at 100% scaling in multi monitor setup with different resolutions

Hi there, I have been asked by one of the moderators of the Windows 8.1 forums to post this topic here. You can see the thread relating to this post here
http://answers.microsoft.com/en-us/windows/forum/windows8_1-tms/cant-change-the-cursor-pointer/ae8ad8a0-3ded-4810-a3be-794f6c4830a4?msgId=2bd7082f-f5d1-4b01-8c70-e0d2a754d66f&page=1<o:p></o:p>
The problem: The mouse pointer becomes unchangeable in size, type, trails etc when 100% scaling is used. As in it reverts to the standard small white non-inverted, no trails,
no shadow 'pointer', no matter what options you select in the 'Mouse' control panel settings.<o:p></o:p>
This appears to be a scaling problem with the Windows 8/8.1 display, not an actual mouse problem. Judging by my own and other peoples experience it seems to happen mainly with multi
monitor setups where different screen resolutions are used. The issue occurs typically when 100% scaling for all monitors is used or this option is un-ticked and the 'change the size of all items' is on smallest (equivalent to 100%). <o:p></o:p>
If the scaling is set to 150% or greater the issue disappears and the mouse pointer becomes fully functional. Also bizarrely when the scaling is set to 100% if the screen is recorded
using a screen capture program, the recording of the screen shows the mouse pointer selected in the mouse options and not the default small white cursor that is present when recording it. Here is a link to a video where I explain and show the problem
happening on my system. http://youtu.be/xs2cxoeaq-A<o:p></o:p>
I have every update installed without exception, latest drivers etc. I use a 55" 4k screen with 2x1080p monitors in portrait on either side. All are connected through 1 Nvidia
GTX 780 6GB graphics card<o:p></o:p>
Hope you can help us<o:p></o:p>
thanks<o:p></o:p>
Jon M<o:p></o:p>

Hi Jon,
I'm looking into this issue but it will take me some time to provide a reply.
In the meantime I noticed that you have 3 monitors with 1x 55' and 2x27' - please have a try to only connect 1x27' monitor and see if issue persists.
Also please try to change the screen resolution to a lower size and see if issue persists.
Both suggestions are not solution, I just would like to know if it is related to multiple monitor or screen resolution.
If you have any feedback on our support, please send to [email protected]

Get the current active monitor handle in multi monitor environment

Hi,
I have a requirement to get the HMONITOR handle of the active monitor in multi monitor environment.
i.e; Get the HMONITOR of the currently selected monitor
Thanks in advance

Hi Chris Lewis,
Thanks for quick reply.
I'm referring to the monitor, where a window is invoked
I want to identify from which monitor, my window was invoked, so that I can create and show the window in that monitor.
I had already tried using MonitorFromWindow(). But it always give primary monitor handle.
My Code:
HMONITOR hMonitor = ::MonitorFromWindow(myMainFrame->GetSafeHwnd(), MONITOR_DEFAULTTONEAREST);
hMonitor always refers to Primary monitor, though window is invoked from Secondary monitor.
Thanks in advance

Multi monitor issues with resolution(?)

At a customer I have got a really strange and annoying problem. The customer has got a Hyper-V VM with 2012 R2 Server as a RDS server aka Terminal Server.
One user has got issues with his multi monitor setup. The connection settings seems to be OK. It is set to full screen and the checkbox for the multi monitor configuration is enabled. Theoretically this works because the user sees a correct setup with one
primary display and one secondary display. The settings itself are correct.
1. Primary display: 1680*1050
2. Secondary display: 27" 1920*1080
The display settings on the client are nearly the same except that the numbers of the two monitors are different (those numbers you get when you click identify at the resolution change window). On the Windows 7 client the primary display
number 2 and the 27" has got the number 1. On the Terminal Server the primary display has got the number 1 and the 27" display has got the number 2. But the corresponding resolution at the display number is correct.
Now the problem. Everything seems fine, the desktop is expended. But when the user is "touching" the top or bottom edge of the screen the display is scrolling (in full screen) - like in a 3D game scrolling over a map. The user told me that
both screens are scrolling equally at the same time. I am not sure but the user told me that if he is going to the bottom the CLIENT task bar appears. Changing the task bar of the client to fixed the user told me that the task bar will always show up. - Strange
that CTRL + ALT + BREAK does not work.
I tried to press CTRL + ALT + BREAK twice, changing the resolution to a fixed value and back to full screen again, changing the primary display to the new 27" monitor, adding smart sizing:i:1 to rdp file and upgrading the Intel HD
4600 laptop graphic drivers (must be downloaded from Lenovo :/). NOTHING helped :(.
But this strange behavior does not exist on the client. Opening two programs (simple notepad e.g.) on each display and maximize them and moving the mouse the screen borders won't show this problem. It only exist on the remote session.
Now the "funny" part. If I connect with Team Viewer to the client the problem disappears as long as I am connected. If I disconnect the problem shows up again.

Hi,
This is most likely a problem with the local machine's graphics driver and monitor configuration. I would suggest trying different things like removing and re-installing the display adapter and its drivers, removing the second monitor/restarting/adding
the second monitor back, adjusting the multi-monitor settings in display properties (changing between extending the desktop to the second monitor and not), undocking/restarting/docking, changing between different modes using Fn key on laptop (if laptop), etc.
The behavior under Team Viewer is likely because the graphics configuration is different when the driver is active.
I wish I could give you more precise instructions on how to resolve the issue. I have seen this behavior (panning desktop, multi-monitor config not exactly right) probably 3 times over the last 5 years, always with a laptop, and I had to "play"
with the settings before it finally went back to normal. The instances I have seen it occur did not involve Remote Desktop specifically.
-TP

How do I avoid errors on a Multi - monitor setup?

Hi.
I want to use Photoshop CS6 on a Multi - monitor setup, using iGPU multi-monitor + GPU system for 4 monitors.
Preiously, I used Photoshop on a Multi - monitor setup without useing iGPU multi-monitor.
And, Photoshop worked well.
However, when I wanted to use 1 more monitor, my GPU supports only 3 monitors.
Then, I enabled iGPU multi-monitor function. It supports 2 more monitors.
At first, It worked. But, after I use "Free transform", "Transform" or something like these tools, Photoshop hang up!
I couldn't figure out the reason why these errors happened.
I need ways to avoid these errors.
Thanks.

Thanks for viewing this discussion.
Finally, I brok through this problem.
I show you how to do, in case of when you face to this problem.
The way to solve this problem is, simple, "buy a new GPU."
But, there is 1 important point, you should buy a same bland's GPU.
In my case, I have SAPPHIRE'S RADEON HD5670, and I bought SAPPHIRE'S RADEON HD 6450.
I think that Photoshop GPUsniffer was confused about GPU driver.
Because there were 2 drivers -- Radeon and Intel Graphics -- exist.
That's why Photoshop hang up.
For your reference,
Best regards.

We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name??

We have multiple devices in our family. On each iPad/iPhone each user has their own apple id for iMessage, Facetime and icloud, but we all sign in to the same apple id for itunes. When one of my kids comments on my shared photostream, it shows my name and not theirs as the commenter. How do I fix that?

CREATE A NEW USER
Go to System Preferences --> Create a New User in Users & Groups
Decide on whether to setup as Admin or Standard User.
Switch to the New User by logging out under the Apple in the Menu Bar or use Fast User Switching
Fast User Switching allows other users to leave current applications and windows open. Depending on RAM, you might need to log out rather than use FUS.

How do i get my screen that show by columns (letf to right) 1) showed Albumn Name then under that showed Artist, next column listed songs on that albumn, next was time (song length), then Artist, Genre, Rating

I imported 2174 songs into my itunes from my husbands CD collection. Then for some reason i was checking out some of itune features. I clicked on FILE>DISPLAY DUPLICATES, Just to see what this feaure was. it changed my page to something that i did not like. I am trying to figure out how to get my itunes VIEW to what it was BEFORE i clicked on the DISPLAY DUPLICATES. My page before looked like: as follows (columns from LEFT TO RIGHT) showed:
COLUMN 1) showed ALBUMN NAME WITH ARTIST RIGHT UNDER THAT, then COLUMN 2) LISTED ALL THE SONGS ON THAT ALBUMN, COLUMN 3) SHOW TIME (SONG LENGTH), COLUMN 4) ARTIST 5) GENRE 6) RATING & 7) PLAYS (WHATEVER THAT MEANS?)
Now the screen: COLUMN 1) JUST LISTS THE ALBUMNS NAME (EACH ALBUMN ONCE, ALL THE WAY DOWN THE COLUMN. BESIDE EACH ALBUMN TITLE IS A (NUMBER...i.e. 13) THEN NEXT TO THAT IS 1 SONG (I AM ASSUMING THIS I HOW MANY TIMES THAT PARTICULAR SONG IS IN MY LIBARY), THEN TIME, ARTIST, GENRE, RATING & PLAYS...
I AM ASSUMING THAT SOMEHOW I HAVE TO TAKE OFF THE "DISPLAY DUPLICATES" BUT HAVE CLICKED ALL OVER TO FIGURE OUT HOW TO DO THIS???? BUT CANT FIND OUT WHERE OR HOW???
CAN SOMEONE PLEASE HELP???
THEN I THINK I BETTER (TAKE THE TOUR) BEFORE I START CLICKING ON THINGS THAT I DO NOT KNOW WHAT IT IS!
PLEASE HELP...I HAVE ANOTHER 400 OR SO CD'S TO IMPORT! SURE HOPE MY HUSBAND IPOD WILL HOLD ALL THESE SONGS SINCE I PURCHASED IT FOR HIM MANY YEARS AGO! OF COURSE I HAVE NOT BEEN ABLE TO USE IT FOR A YEAR (SINCE STAPLES ATTEMPTED TO FIX MY OLD COMPUTER & LOST ALL THE MUSICE OUT OF MY COMPUTER) & IF I PLUGGED THE IPOD IN AGAIN, I WOULD HAVE LOST THE 1800 SONGS THAT WAS IN THE IPOD!!! NOTHING BUT PROBLEMS WITH STAPLES, MICROSOFT! RECEIVED NEW COMMPUTER & NOW NONE OF MY EXPENSIVE PROGRAMS WORK ON THIS STUPID WINDOWS7. OVER 3500.00 WORK OF EXPENSIVE SOFTWARE & NO ONE CAN TELL ME HOW TO GET MY PROGRAMS INSTALLED & WORKING...
JUST MY LUCK...LOOKED AT BACK OF IPOD & SURE ENOUGH IT ONLY HAS 30 GB!!! SO FAR I HAVE 16+ GB OF MUSIC IN ITUNES & HAVE 400 CD'S TO GO YET. AMAZING...NEW COMPUTER THAT WONT RUN MY PROGRAMS & NOW AN IPOD WITH NOT ENOUGH MEMORY& OF COURSE NOT ENOUGH MONEY TO PURCHASE ALL MY PROGRAMS AGAIN! LIKE MICROSOFT HAS TO MAKE OPERATIONS THAT WILL NOT RUN...PERFECTLY GOOD PROGRAMS LIKE PHOTOSOFT, DREAMWEAVER, WACOM, PUBLISHER, MICROSOFT PICTURE IT, PUBLISHER, POWERPOINT, ETC. ETC. FOR $199.00 THEY CAN TRY & HELP ME. WHO HAS THAT MUCH MONEY. THEY WONT EVEN HELP ME RE-INSTALL THEIR OWN PROGRAMS...I KNOW I WENT OFF THE ORIGINAL SUBJECT BUT AM SO FRUSTRATED THAT I WANT ANYONE TO LISTEN TO POSSIBLY GET SOMEONE TO HELP WITH THESE OTHER ISSUES, ALSO. STAPLES HAVE REALLY NOT HELPED AT ALL EITHER.. BUT THEY SURE CHARGE ENOUGH TO MAKE YOU KEEP PURCHASING MORE THINGS TO MAKE THE PROGRAMS WORK & THEY STILL DONT. THEY SURE CAN TELL ALOT OF LIES THOUGH! FOR NOW, CAN SOMEONE HELP ME GET MY ITUNES SCREEN BACK??? THANKS SO MUCH...THIS I AM SURE IS OPERATOR DEFISENCY!

The large text size makes your post almost impossible to read.
Excessive use of bold or capitals (also) makes posts difficult to read.
You can drag most of the column headings left or right, or right-click on the header to turn columns on or off.
Once you've used File > Display Duplicates or Shift > File > Display Exact Duplicates you can use File > Display All or the Display All button at the bottom of the list to restore the display.
For general advice on organising your library see this article on Grouping tracks into albums.
tt2

IMessage not showing contact names

I just recently downloaded and installed OS X Mavericks on my 2011 iMac and trying to get up and running with the new iMessage app. But there are two major bugs I can figure out how to fix if anyone can help me fix these problems or comment if your having the same issues that would be a big help.
1: When receiving a message from someone in my contacts list/address book, their names do not apper next to the message, but rather only their phone numbers. I have went thought the view options and selected show contacts name and also tried adding a name to the existing number with no results. Does anyone know how to fix this bug?
2: The lag time between SMS/iphone messages and the time it takes to show up in iMessage on my mac is rather long. There is about a 3 minute delay before the text message conversation shows up from my phone to computer. Any suggestions on how to fix this?
Thanks

Hi,
Re 2).
This is a bit of a "known Issue" with no current fix.
The issue is related to the fact a iOS device seems to get the "first " push of the iMessage and that the Mac only gets "Sync" push which seems to be slower (and for some bizarre reason not always in order)
Re 1) I have seen this reported but maybe not as clearly as your post.
No-one seemed to make it clear the Contacts were in the Address Book (Contacts app) and that it seemed to be ignoring the Names for just the Numbers.
Obviously you can use the View Menu > Messages > Show Pictures and Name (or Show Names)
As you say this should link the ID or iPhone Number being used in the iMessages to the "Real Name" in the Address Card for that person.
The options are:-
A) You are receiving an iMessage from an iPhone Number but the link to the Address Card is not working.
If you make sure you are sending to an Apple ID what do you see ? (Apple ID or Real Name or in fact the iPhone number again)
This may be because you have lost the ability to "read" the saved data for the Contacts app.
B) Check the Contacts app and see if it is Syncing properly with any iOS device (i.e that all items have the Name as well as an iPhone number in the Address Card.)
10:32 pm Thursday; November 7, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.

I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.but the result was same. now what can i do??

BobbyLe wrote:
I could not follow the AT&T instruction because my network (Optus) doesn't have anything as username or password or dial-up phone number. The only parameter I needed to key into Mobilink (the software I am running on the S10 is the APN which is: connectme that's it no number, no PIN, no password, nothing else.
How do I tell Windows to do that?
*99***1# <--- the number to call
at+cgdcont=1,"ip","connectme" <----- the string to put in the advanced field of the modem

External Monitor Shows Only Black Screen ??

Recently, my PowerBook G4 12" stopped working properly with my external monitor. My external monitor is a Dell 2005FPW that is connected to my laptop via a mini-DVI adapter, a VGA cable to the VGA port on the 2005FPW. When connected to the laptop, the 2005FPW goes black; otherwise, the monitor shows it's "rest" screen which is a bouncing color bar.
This system has worked without problems for years. I changed nothing in the configuration and (possible red herring) the only "event" prior to the problem developing was that I installed the "Security Update 2008-005 (PowerPC) v 1.0".
I have confirmed that the monitor and VGA cable are working with my wife's laptop.
Today, I replaced the mini-DVI to VGA adapter, and the problem hasn't gone away.
Any suggestions?
Michael

Did it develop around the same time, after you downloaded the security update?

Multi monitor shows swapped names

Similar Messages

Maybe you are looking for