Multi provider data

Hi,
We have a Multi Provider which is built on a Master data object and a DSO.
We included 2 navigational attributes of the master data object in the Multi Provider.
But the Multi Provider is not displaying any data for the Navigational attributes.
When we check the master data object, we have 2 records for one product .
one record has all the values are filled in and the 2nd record is not filled up with values.
Our Multi Provider is picking up the 2nd record for each product.
But in query, we have display the values.
Please suggest us how to get these values in the Multi Provider.
Thanks & Regards,
Jyothi.

Hi Jyothi,
Multiprovider works on Union functionality and it fetches data from all the underlying infoproviders. In case of navigation attributes data is displayed in the query from actual master data objects, you do not need to include the master data object in multiprovider for using navigation attributes.
Once navigation attributes are marked for available for reporting in underlying infoprovider they will be available in query and data shown will be from masterdata infoobject.
Just check that you have activated master data infoobject properly and then see the query output. Finally check if there is any filter in report.
Regards,
Durgesh.

Similar Messages

Which type of setting we need to maintain in query to get Multi Provider data

HI Friends.
I created query on top of Multi Provider. Multi Provider created on top of Hybrid provider and Standard cube.
When i executed the Query on top Multi Provider, i can't see the data of Hybrid Provider through Query.
In BW side i can see the data on Multi provider.
Can any one help me.

Hi,
First need to understand what is the use of Hybrid Provider in what cases we prefer provider.
Multiprovider :can be created based on DSO & Infocube
Hybrid Provider : Can Be created based on DSO / HybridProviders based on direct access.
For more Info on Hybrid Provider : Creating HybridProviders - Modeling - SAP Library
There are no settings to get Hybrid provider data Or Multiprovider data in Bex .
Even though if we need to do any settings we can do it in SPRO , check once in SPRO tcode related to Bex reporting settings.
Regards,
Seshu.P

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

How to see data in the multi-provider ?

We have a multiprovider with the key figure as total stock, and its given as a non-cumulative kf which has a check mark next to it. Its getting data from the infocube to it, I mean there are 4 infocubes and 1 ods to the multi-provider. If I right click and see the infocube or the multi-provider and select the fields by rite click and I am unable to see the total stock kf. But if I click the actual multiprovider and click display instead of display data, I am able to see the keyfigures folder, if i expand that I see stock quantity folder and many other folders. If I expand stock quantity folder, there are 3 kf's ztotalstock, 0isstock and 0recstock. In those ztotalstok is non-cumulative checked. And I am unable to see the kf value when i rite click on the mp. So any suggestion to display the data by selecting a posting date in the mp. What my guess is , will there be any internal table/view to display the mp data. Please let me know any suggestions.
Thanks for your time,

Prasanth, entering the mp name in LISTCUBE is same as right click on the mp and click on display data, where it will give the selecting criteria for the fields. But here both will display the same fields, that is not my case. I am unable to see one of the key figure which is inside the mp, have you opened any mp. Please right click on it and choose display and then go to the key figures folder , if you open that you have lot of folders in it based on the category. IN my case its the stock kf folder and if you expand that there are three kf's out of the three, one is ztotal stock which is declared as non-cumulative kf, rite next to it, option is checked. So I think that is the reson we are not able to see ztotalstock kf , no matter in the listcube or display data option on the mp. Hope you got my situation. I know how to see the data in the multi-provider or infocube. But in this case its not displaying that ztotal stock keyfigure, but in the reporting we can see the data on the mp. My question is why am I not able to see the selection for that ztotal stock key figure , either in listcube or rite clik display data option. Did anybody face this situation.
Thank You,

Multi provider not pulling data

Hi All,
I have 2 data targets ,1 is 0PA_C01 cube and 2nd is a custom DSO.i created a multi provider on top of them and made the identification process properly for chars and keyfigs.in my case 0HRPOSITION is the common char between the two data targets.when i see for the data in listcube transaction it is showing only data related to the cube it is not showing DSO related data.
In the list cube transaction info provider column is showing only 0PA_C01.
Please suggest me if i am missing something.
Thanks
Sri

Thanks Mr M & Singh
both of your suggestions are valid but no use in my case,0hrposition is having data in both data targets.if i copy 1 position value into another data targets it is showing values,it means there is a problem at multi provider level.
**the multi provider not at all pulling the second data target values ,i tested with some other data targets in all the cases values for only one data target are coming.
i am in BI 7.0 SP20.
can someone suggest more inputs?
Thnaks
Sri
Edited by: super trooper on Feb 13, 2009 11:45 AM

Fetching Data from Multi provider

Hi,
Iu2019ve created multi provider in which I used 2 cubes, when I am viewing the data through the T-Code: LISTCUBE data is fetching from both the cubes but in BEX report itu2019s fetching from only first cube.
Thanks & Regards,
vikram

Its purely the design problem ... try to check the identification of the char's.
-> Check the identification of the char n KFs, Make sure the identification for the fields is done on both the ICs in MP design.
-> Make sure the data is not restricted with 0infoprovider in the query level.
Suppose the IO -0costcenter is comming from both the ICs but while identification of IOs you had selected both the ICs im MP, check this for all the IOs.
Regards
KP

Multi provider is not getting exact data.

Hi Experts,
I am working on BW, I have created a Multi provider with three cubes and one ODS, I have added total 16 objects in this Multi provider, while I am executing this Multi provider in LISTCUBE it is showing only four fields data, all fields are having data but in listcube 12 fields are showing empty.
How can i get the remaining fields data also,
Please help me to get the data,
Helpful answer will be appreciated with full points.
Thanks in advance,
Venkat.

Hi,
Check that there is data in the cube that is available for reporting.
Try to include 0INFOPROV in the query to verify the InfoProvider from which data is being pulled.
Try a LISTCUBE on the cube to see that it contains data as per the filters, or selections in the query.
Also check this link..
Multiprovider showing data from only one underlying object?
Hope this helps u..
Best Regards,
VVenkat...

U0094Generate Export data Source" form multi provider.

Hi,
If we give the context menu to the multi provider we get an option that Generate Export data Source. That means is it possible to generate the data source from multi provider. If yes , then we will load data from one multi provider to another data target.
How can we see the data in Multiprovider.
Regards,
Venkata Sharma

A Multiprovider has no storage of data.
But you use a query build on top of it, and see the data from the Datatargets that are used on that Multiprovider (can be cubes, info-objects, info-sets).
I am working in BI 7.0 and I don't have the option of generating the export datasource!
Hope it's clear now.

Multi provider

Hi Experts.
I have one DSO and one CUBE.only two fields are common in the both DSO and CUBE.now my requirement is i need all the fields from the DSO and some fields from the cube( which fields are not common). what is the best one to use multi provider or Info set.
If we can achive through Info set how to do it.
regards..roi
Edited by: samuroi on Apr 13, 2010 2:17 PM

Hi
Check these links:
http://www.scribd.com/doc/6446225/BI-Data-Modeling-Multi-Providers-and-InfoSets
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2f5aa43f-0c01-0010-a990-9641d3d4eef7
http://www.sap-img.com/business/steps-for-creating-multi-provider.htm
Regards
Chandra Sekhar T

Help needed on Multi provider

Hello Experts,
we have crated an ODS and loaded data from flatfile, now i need to put this ODS in Multi provider, which i did but i dont have any key figures in my ods which is making a problem while activating the Multiprovider , can anyone help me on this.
Thank You,
Jon.

Surendra , an ODS should have a Key field and not necessarily a Key figure however to create a cube / multiprovider , it is a must that you have a key fiugure , which leads me to ask the following questions:
1. Why do you need a multiprovider on an ODS with no facts(key figure)?
2. Why not an Infoset?
If this is for experimentation alone , trhe answer is clear,
A multiprovider cannot be created without a key figure , this goes against the very concepts of Data Warehousing and think if your architecture is correct and why you need a multiprovider and a multiprovider alone will satisfy your requirements.
Arun

Assigning a Key Figure in a Multi provider

In a multi provider if I have a key figure which is assigned from more than one part providers. What does this exactly mean? For example:
Let's say I have a key figure Number of Sales which is present in two part providers and assigned from both the providers, if I build a query say Country | Number of Sales what happens with the assignment
Thanks

Good point.
My scenario is as follows.
1. We are building a query which uses a base query as a template.
2. Our query is built off a seperate multiprovider which replaces one of the part cubes with a cube that has consolidated set of data from SAP and Non SAP systems
3. In the original multi provider one of the key figures is assigned from two part providers, one of which is that which we are replacing - this key figure is used extensively in the definition of other query level key figures
4. The key figure does not exist in the consolidated cube but we have a key figure that we will use instead of.
5. The original query does not have info provider restrictions at the query or local key figure levels
I believe I can sum the two figures when I define the Key figures in the new query but just needed clarity on if this is a solution hence wanted to confirm the values are being summed up assuming no restrictions etc
Sorry guys,
before I close this message I just wanted to confirm the following, do not want to save/activate the change on the system
I have carried out a check after I removed the assignment from one of the part providers it seems that this is possible - this is correct. If this is the case it seems that the business requirement is to sum the values from the two part providers
I
Edited by: Niten Shah on Jul 9, 2008 6:44 PM

Incorrect Non-cumulative values in a Multi-Provider

Hi everyone,
I have created one Multi-Provider using Info-cubes 0IC_C03 & ZSD_C03.
The requirement was to get the "Invoice value" instead of the "Stock Issued Value" in 0IC_C03.
I have used the characteristics 0CALMONTH, 0CALDAY, 0MATERIAL, 0PLANT & 0SOURCESYSTEM in the MP.
However, when i execute a query based on the Multi-Provider, I notice that all Cumulative Key-Figures are showing correct Values, but the Non-Cumulative KFs (Val Stock Qty etc) are showing incorrect values (Large Quantities are displayed).
I am not sure why its happening? Please Help
Regards,
Srikar

Hi Ram,
Previously i was using a variable on 0CALMONTH for restricting the data which resulted in Incorrect NC values.
Later on, when I changed the Restriction based on 0CALDAY, the query was working fine.
Moreover I also included all the Characteristics present in the Validity Table of the Cube 0IC_C03 in the MP which i didn't initially.
I guess those two changes made the difference.
Regards,
Srikar

How to move all the standard and adhoc reports from cube to multi provider

How to move all the standard and adhoc reports from the basic cube to multi provider?
i created this multiprovider to do the maintenence on the basic cube. for example the infocube physical partition, line item dimension and compression.
what we decided to do is move all the Standard and ad-hoc reports from the basic cube to the multiprovider. How to do it? and make a copy of the basic cube and do the maintenence on the cube. please help.
Thanks in advance sdn experts!

Hi Les,
This sounds good and one thing we try to always keep in mind when undertaking such activities is to always minimise the impact to the user and make the process as transparent to them as possible. So lets say you have your multiprovider and copied queries up in Prod, these queries will still pick up the data from the base cube.
Now you need to make a copy of the base cube for some changes to the cube model, I would suggest that you copy the cube and make your changes on the copied cube itself. Then 9depending on the changes done) you can load data from Original Cube to New Cube. When this is being done, make sure that you change your queries to add a restriction on 0INFORPOV by Original Cube.
After the load to the new cube is complete you can run reports restricted to each cube to verify the numbers. Then change the 0INFOPROV restriction in the queries to point to the New Cube and disengage the old cube from the multiprovider.
Hope this helps...

DBMS_LOB.WRITE fails to write multi-byte data

We have Oracle 8.1.6 database, UTF8, and a table with a CLOB column. I'm trying to write some multi-byte data (Japanese) to that CLOB using DBMS_LOB.WRITE(lob_loc,48,1,v_buffer);
I get ORA-00600: internal error code, arguments: [711], [25806920], [koklt2u buf], [], [], [], [], []
The data I'm trying to insert is UTF8 encoded(because I selected it from another table in the same database).
Do I need to convert it to a multi-byte fixed width Unicode encoding to store in CLOB? I thought this would happen automatically.
The DBMS_LOB.WRITE seemed worked OK when I wrote extended ASCII chars to the CLOB, but doesn't work for Japanese.
null

I think this is related to Bug 745585 - If the database char character set is varying-width, and you call DBMS_LOB.WRITE() with an input amount that is greater than the data in the buffer, you will get an internal error. The workaround is to provide the correct amount of data in the buffer.

Activation error on Multi Provider which has Non-cumulative Cube

Hi,
My company has upgraded the BI 7.0 from 3.5.
It is working fine so far.
But I met the below message and could not activate it when I generate the multi provider which has Non-cumulative Cube.
Define the characteristics of the validity table for non-cumulatives (Message no. R7846)
And then I checked the Single cube but Single cube has no error.
I think this is program error and searched the notes in OSS but could not find.
Does any expert know this issue?
Thank you.

Hi lee,
validity slice tables need to be defined for cubes using non cumulative key figures.
In this we need to specify the characteristic combination on which this table has be maintained.
The maintanence can be done from cube change mode, menu bar extras--> maintain non cumulative values.
This table constantly gets updated with validity dates as we upload data.
An report on this can be seen in tcode RSDV.
Naveen.A

Multi provider data

Similar Messages

Maybe you are looking for