Multimedia Audio Controller, and Video Controller(VGA compatible) are missing on Windows XP(32Bit) SP3

Hi.
My Desktop Computer(Intel P 4, 512MB of RAM, and Graphics Card  with 256MB of RAM)
Also, My Desktop Computer with P 4 doesn't have any access internet since there is no network adapter is installed. As a result, I would not be able to run the pc scan utility, or  Reader a web-based applet that identifies my GPU or Audio controller
and finds the latest graphics driver for my GPU, and Audio.
I have two Windows XP installations:
Windows XP SP2(32Bit) which is old and it seems it infected by some viruses.
I have installed another fresh clean Windows XP(32Bit) SP3. However, I have two devices not detected well by Windows XP.
First of all, when saying that I have multi-operationgs systems, I mean there are two operating systems installed on my PC(SP2, SP3) both are 32Bit. The first Windows SP2(NOT installed by me) has all multimedia audio card installed well,
and has SCSI and RAID Host Controller shown the device manager. However, only the VGA is not installed on Windows SP2. However, the second one Windows SP3(Installed by me) has VGA not installed, Multimedia audio NOT installed, and there is no SCSI and RAID
Host Controller in device manager.
First:  Yes, my motherboard has integrated video, and integrated audio card
According to the screen shots above, then
The vendor ID of Multimedia Audio Controller  is 8086 and the device ID is
24D5.
The vendor ID of Video Controller  is 8086 and the device ID is
2572.
I AM EXPECTING THAT KNOWING THE VENDOR ID AND THE DEVICE ID WILL LET ME QUICKLY FIND THE APPROPRIATE  DRIVER. HOWEVER, I COULDN'T FIND THE APPROPRIATE DRIVER.
Thus, could you please help me to find them?
I have tried installing a soundMAX card  driver, however, I found this error.
I have checked the other Windows XP SP2(32Bit) which is oder installed, and it seems it infected by some viruses.
However, the Multimedia Audio on that Windows is installed well. As here: I only posted these screen shots to show what kind of device is Multimedia Audio Card
The motherboard model is:
Belarc Advisor Computer Profile
Operating
System
System
Model
Windows XP Professional
Service Pack 3 (build 2600)
Install Language: English (United
States)
System Locale: Arabic (Yemen)
Installed: 22/03/2013 12:03:16
ص
Boot Mode: BIOS (Secure
Boot not supported)
Enclosure Type:
Desktop
Processor
<sup>a</sup>
Main Circuit Board
<sup>b</sup>
3.00 gigahertz Intel Pentium
4
16 kilobyte primary memory cache
1024 kilobyte secondary memory
cache
64-bit ready
Hyper-threaded (2 total)
Board: 775i65G.
Bus
Clock: 200 megahertz
BIOS: American Megatrends Inc. P3.00
03/20/2007
Drives
Memory Modules
<sup>c,d</sup>
39.99 Gigabytes
Usable Hard Drive Capacity
29.48 Gigabytes Hard Drive Free
Space
COMPAQ CD-ROM LTN486S [Optical drive]
3.5" format removeable
media [Floppy drive]
WDC WD400BB-75DEA0 [Hard drive] (40.00 GB) -- drive
0, rev 05.03E05, SMART Status:
Healthy
504 Megabytes Usable
Installed Memory
Slot 'DIMM0' has 512 MB
Slot 'DIMM1' is
Empty
Local Drive
Volumes
c: (NTFS on drive 0) *
20.98 GB
14.16 GB free
d: (NTFS on drive 0)
19.01 GB
15.33 GB free
<center>
* Operating System is installed on
c:
</center>
Network
Drives
None
discovered
Users
<small>(mouse over user name for details)</small>
Printers
local user
accounts
last logon
عايض
لرضي
19/01/2015 10:59:17 م
(admin)
local system
accounts
Administrator
never
(admin)
Guest
never
HelpAssistant
never
SUPPORT_388945a0
never
<center>Marks
a disabled account;   Marks
a locked account </center>
Controllers
Display
Standard floppy disk
controller
Intel(R) 82801EB Ultra ATA Storage Controllers
Primary IDE
Channel [Controller]
Secondary IDE Channel [Controller]
None
discovered
Bus
Adapters
Multimedia
Intel(R) 82801EB USB
Universal Host Controller - 24D2
Intel(R) 82801EB USB Universal Host
Controller - 24D4
Intel(R) 82801EB USB Universal Host Controller -
24D7
Intel(R) 82801EB USB Universal Host Controller - 24DE
Intel(R)
82801EB USB2 Enhanced Host Controller - 24DD
None
discovered
Virus
Protection <small>[Back to Top]</small>
Group
Policies
Norton AntiVirus Version 18.1.0.37
    Virus Definitions Version Not Up To Date
    Realtime File Scanning
On
None
discovered
Communications
Other
Devices
↓ Realtek RTL8139 Family PCI Fast
Ethernet NIC
Status:
Cable unplugged
Dhcp Server:
none responded
Physical Address:
00:19:66:1F:F7:54
USB Human Interface
Device
Standard 101/102-Key or Microsoft Natural PS/2
Keyboard
HID-compliant mouse
USB Root Hub (5x)
USB Storage Use in past 30 Days<small>(mouse
over last used for details)</small>
Hosted Virtual Machines<small> (mouse over
name for details)</small>
Last
Used
SanDisk Cruzer Blade, s/n
4C532000020502112303, rev 2.01
19/01/2015
09:32:57 م*
USB 2.0 USB Flash Drive, s/n
59309e92e21612, rev 0.00
09/01/2015
12:29:17 ص*
<center>* Possibly used again before the reboot following this
time.</center>
None
discovered
See your entire
network map...
click for Belarc's System Management products
A man should convert his anger and sadness into strength to continue living in this life.

Dont worry, dont think anyone was as a matter of fact
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=908&jump= true#M908
http://support.microsoft.com/default.aspx?scid=kb;en-us;80509
http://support.microsoft.com/default.aspx?scid=kb;en-us;84567
that worked for me, maybe it will help someone else that went through what i did, its a miracle i did not top myself after going through all this BS. ALSO dont threaten your computer with violence, cos it will always call your bluff which makes things worse

Similar Messages

  • Diff between Component controller,Custome controller and  View controller

    hi,
        Can any body tell me the following details,
    1.difference between the Component controller,Custome controller and  View controller in WD-ABAP.?
    2.what is Lead Selection?   
    Regards,
    Ravi

    Hi Ravi.
    The component controller is visbile to all views in a component. So all context nodes and methods you create here can be accessed from all views in the component. This way you can share data between the views by mapping context nodes or thru method calls. You can also mark methods and nodes as interface so that they are acessable from other components that define component usages to this cmponent.
    Custom controller is quiet similar to the component controller. You can define it if you want to group some views with a custom controller for a certain functionality.
    If you want to access a custom controller in a view you have to define the usage first on the properties tab of the view.
    A view controller is only visible in the view itself. So all methods or context nodes you define here are only accesable by the current view.
    The lead selection is in most cases the current selected element in a context node. The lead selection is used by many UI elements to determine which element has to be shown (e.g drop down).
    If you have a table with single selection the current selected table row is the lead selection element of the bound context node.
    SO you can get the lead selection element easily in any mthod by calling context_node->get_element( ).
    Hope this clears your questions.
    Cheers,
    Sascha

  • How to synchronize audio track and video when transmitting by RTP

    since the audio stream and video stream are transmitted separately on the network even if in a merged data, how to synchronize the audio stream and video stream at the receiving end ?

    camelstrike wrote:
    Hi everyone!
    I've tried to make one of the processors, processor1, control the other processor, processor2, with processor1.addController(processor2) but I get a
    javax.media.IncompatibleTimeBaseException. I need to synchronize audio and video rtp-streams because they are sometimes completely out of sync.
    In JMF API Guide I've read:
    "2. Determine which Player object's time base is going to be used to drive
    the other Player objects and set the time base for the synchronized
    Player objects. Not all Player objects can assume a new time base.
    For example, if one of the Player objects you want to synchronize has
    a *push-data-source*, that Player object's time base must be used to
    drive the other Player objects."
    I'm using a custom AVReceive3 to receive rtp-streams and then I create processors for the incoming stream's datasource's, and they are ALL PushBufferDataSource's.
    Does this mean I can't synchronize these. If so is there any way I can change them into Pull...DataSources ?The RTP packets are timestamped when they leave, and they are played in order. You can't change the timebase on an RTP stream because, for all intensive purposes, it's "live" data. It plays at the speed the transmitting RTP server wants it to play, and it never gets behind because it drops out of order and old data packets.
    If your RTP streams aren't synced correctly on the receiving end, it means they aren't being synced on the transmitting end...so you should look into the other side of the equation.

  • Audio Messages and Video

    I was excited to see that you could finally send audio messages and videos.....but when I realized that you can only use this feature when you are talking to someone else who has an iPhone...it peeved me. I was trying to understand why I was not seeing the microphone feature to the right, as in the "Tips" app. Hope this is not the case. Anyone noticing the same?

    Well, I just checked on my device, and it appears that the mic does not appear if I try a contact that does not have an iPhone. You could check the user guide here http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf  and see if it provides any further information.

  • Difference between custom controller and component controller

    Hi All,
    I am a beginner in CRM SAP .
    Please can anyone tell me whats the difference between custom controller and component controller with some scenario.
    I am totally baffled.
    Thanks in advance.
    Regards
    Shilpi

    Hi Shilpi,
    The main difference between custom and component controller is the role which they play during data transfer.
    a) Custom controller is used for data transfer across two views within a component. For that you need to bind view context nodes to custom controller either through wizard or manually by adding the code in CTXT class create_contextnode method:
    initial setting for depandant model node
        coll_wrapper =
          BTADMINH->get_collection_wrapper( ).
        TRY.
            entity ?= coll_wrapper->get_current( ).
          CATCH cx_sy_move_cast_error.
        ENDTRY.
        IF entity IS BOUND.
          BTOpportH->on_new_focus(
                       focus_bo = entity ).
        ENDIF.
    b)Component controller is used for data transfer across two views in two different components. For this, we need to define the component usage first and then bind the context nodes in the method-WD_USAGE_INITIALIZE of the Component Controller impl class.
        WHEN 'ComponentUsageName'.
          iv_usage->bind_context_node(
                      iv_controller_type  = cl_bsp_wd_controller=>co_type_custom
                      iv_target_node_name = 'ContextNodeName'  "#EC NOTEXT
                      iv_node_2_bind      = 'ContextNodeName' ).  "#EC NOTEXT
    Hope this clears some of your doubts!
    Thanks and Regards,
    Rohit
    P.S-This is valid for CRM 2007.Raghu is also right because Interaction Center is made up of different different components combined together.You have put your question in wrong forum.

  • What is the difference between Custom controller and context controller?

    Hi Gurus,
    What is the difference between Custom and context controller?
    In which occasion we should prefer to use Custom Controller?
    Thanks in Advance,
    Dharani

    You mean difference between custom controller and component controller???
    if yes...
    its been discussed many times.... just go through these threads, you will be clear
    custom controller vs component controller
    Component Controller and Custom comtroller
    [ why we need Custom controllers in Model Applications |why we need Custom controllers in Model Applications;
    [CONTROLLER AND CONTEXT|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/944ea9e5-0601-0010-65b3-b49a56eb6385]
    Pradeep
    Edited by: pradeep bondla on Jul 22, 2008 12:42 PM

  • In which situvation you will use interface controller and custom controller

    in which situvation you will use interface controller and custom controller?

    Hi rafi,
    Custom Controller  Custom Controller is as same as the component controller, here we can write the business logic.
    Custom Controller means developer can create multiple controller denpeing up work.
    By using component controller we cant create multipule contrllers. when we create the DC that time it will be created automatically.
    Please look at this [Link|http://help.sap.com/search/highlightContent.jsp]
    interface controller
    Communication between two componets by using interface controller.
    Please look at this  [ Thread|Commmunication Between two Components;
    Regards
    Vijay Kalluri

  • Pops and Clicks and Delays with X-Fi Fatal1ty Platinum in Windows 7 32bit

    Hi, I own an x-fi fatalty platinum sound card and I have installed the beta driver for Windows 7 32bit.
    When doing things in the OS, i get occasional pops and clicks. I know exactly what it comes from, it happens when there are multiple sounds being played simultaneously. If I join a ventrilo server, the little intro sound it makes pops and clicks. If I hold down my talk key, sometimes it will pop and then play the little talk sound, sometimes it won't play the sound at all... and the same is true when I let go of my talk key.
    Virtually everything I do in the OS has this weird pop and click sound associated with it. Playing music, however, doesn't have that problem because an MP3 is a continous stream of audio and counts as a single sound. It's when there are multiple sounds overlapping does it pop/click or fail to produce the sound at all or in its entirety. It's like the x-fi is delayed and isn't able to play the sound fast enough which therefore produces a pop and clicking sound at the beginning of sounds. This is why I purchased an x-fi sound card becaus it eliminated this problem from my onboard sound. Now it's BACK in Windows 7.
    Also, when I play UT2004, by default there's an option called "Use System Driver" checked in the sound options. This makes everything in the game have a slight 0.25 second delay, but it's enough to make it noticeable and annoy me. If I disable "Use System Driver", it fixes the delay but the pops and clicks come back!? I can't win one way or the other.
    Windows XP does not have this problem. I have tried both the stable x-fi driver and the beta driver. I have tried updating my OpenAL software. I'm not sure what to do beyond reinstall Windows 7 and try again... which I really do not look forward to doing.
    If anyone could assist me, or take note of this issue so it could be fixed in later drivers, it would be very much appreciated.
    Thank you,
    -Neil
    Message Edited by Neillithan on 08-2-2009 04:32 [email protected]

    Hello?

  • I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.

    I recently transferred my ITunes library to an external hard drive.  I made sure to copy all the data from the saved location.  After the transfer I noticed that a lot of albums are missing the first song and some recently purchased albums are missing.  Is there any way to recover the data?  Thanks for any help.

    I may have found an answer here:
    http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive
    They only thing I can assume is that my external hard drive was slow to start and iTunes defaulted to its old directory (see the last paragraph at the link above). However, once my external was recognized shouldn't everything have fixed itself?
    Message was edited by: williamson42
    Message was edited by: williamson42

  • TS1702 I synched my phone and now my apps icons are missing on my iphone. I can see them and open them if I go to the app store. How do I get the icons back on my screen?

    HELP, I synced my iphone and computer and now my apps icons are missing on the screen of my iphone. I can access the apps only through the apps store by pressing OPEN. How do I get the icons back on the screen for the apps?

    Make sure your phone is connected to the computer and iTunes is open
    1. Visit Instagram.com from your computer web browser
    2. Click "Download in the app store"
    3. It will download and show up in your iTunes
    4. Highlight and sync the app to your iPhone (note: it will not show up on your phone, even after it says syncing is complete).
    5. In iTunes, select the Instagram icon and click "Remove" or "Uninstall"
    6. Click Accept and Uninstall when it asks you to confirm as it will remove instagram and its data from your iPhone
    7. Disconnect the phone from the computer
    8. Manually reboot the phone after exiting all apps
    9. Upon re-start, you will be able to access the app in the App Store, and install it

  • Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

    Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

    I ran the adobe cleaner and that did not help. I then uninstalled norton antivirus. and that solved the problem and I was able to install photoshop cs3. I than reinstalled norton antivirus. My system seems to be fine,

  • Hi, I bought an original iPhone 6 from an authorised dealer in China, however on the back of the phone, the FC, CE, and other safety logo symbols are missing. Is this normal for the chinese iPhone 6?

    Hi, I bought an original iPhone 6 from an authorised dealer in China, however on the back of the phone, the FC, CE, and other safety logo symbols are missing. Is this normal for the chinese iPhone 6?
    Thank you for your help!

    caxx wrote:
    Also very strange is that I don't have the folder "MobileSync" in /Library/Application Support/MobileSync on my computer. I can't find that folder anywhere.
    Correct.
    You need to go to ~/Library/Application Support/MobileSync/.
    The ~ indicates your User folder not the top level /Library/ folder.
    Click on the desktop, then hold Option and go to Finder menu Go and Library will be there (only when holding Option as it is hidden).

  • HT1349 i over scratched the code on my itunes card and some of the digits are missing what do i do?

    i over scratched the code on my itunes card and some of the digits are missing what do i do?

    Copied from another discussion. Taken from the More Like This box on the right side of your post.
    On the bottom of your card, beneath the barcode, you will se a long number that starts with GCA, PBH, or maybe 6. That is the card serial number.
    Go to apple.com/support/itunes/contact.html to email the iTunes store support.
    Just explain that the redemption code was scratched off, and give them the card serial number. Someone from the iTunes Store will email you back with the cards redemption code.

  • Screen Share, Audio Chat and Video Chat not working

    Hey everyone.
    I recently started having issues with using some of the iChat protocols over AIM with a friend of mine.
    I can send IMs and files perfectly, but I can't get Audio Chat, Video Chat or even Screen Sharing (both ways) to work. After a while I get: "Failed to start Screen Sharing because: Screen Sharing could not be established." I also get the exact same message when trying to Audio chat or Video chat.
    If anyone knows the answer to this problem please help us...
    Thanks in advance
    DJ Schep

    Is this with a Speedtouch ?
    Is this you http://discussions.apple.com/thread.jspa?threadID=1668357 ?
    11:48 PM Monday; August 18, 2008

  • Audio and video out of synchronization in iTune for Windows 8.1

    When playing back a downloaded iTunes file, the audio and video are out of synchronization a lot of the time.  The audio can be several seconds behind the video.
    How can this be corrected/fixed?
    I am running the latest iTunes software on a 3.8Ghz AMD-processor machine running Windows 8.1.

    Hi John,
    Welcome to Apple Support Communities.
    Take a look at the article linked below, it provides a lot of great troubleshooting tips that you can try, which will resolve most video playback issues in iTunes.
    Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    I hope this helps.
    -Jason

Maybe you are looking for