Multiple background jobs to fill set-up tables in LO

Hi,
Can we schedule multiple background jobs for filling the same set-up table concurrently - obviously with non-overlapping selections.
ex: one background job for filling order# 1000 to 100,000
     one background job for filling order#100,001 to 200,000
Both jobs running at same time.
Thanks,
Anita S.

Hi Anitha,
Yes we can Schedule Multiple Setup Jobs for the same Application wiht the Diff Ranges of selections.
It is possible and i have tried in our project.
Egg:-
We did a Reload of some doc that were missing in BI.
Did selective deletion of those corrupted data in some Data targetsand filled the Setup tables wiht those selection conditions (in our case 10 diff selection).
We ran this jobs in Background simultaniously when all the jobes finished we have ran the Full Repair Requests of those 10 selections to those respective data targets.
Hope this gives you enough clarity.........!!!
Best Regards,
VNK.

Similar Messages

  • Error while filling set up table SD-Billing Documents - Perform Setup

    Hello friends,
    while filling set up table of SD-Billing Documents - Perform Setup
    i am getting error 'TSV_TNEW_PAGE_ALLOC_FAILED' . i am executing this job in background process . Please suggest me a solution .
    Regards
    Nilesh Vakil

    Hi,
    Try some other LO extractor in RSA3 to check if you get the same error.
    If you dont then it may not be system memory issue, check if thr is some user exit written for the extractor.The problem could be in the user exit whr the internal table may get overflown and lead to the page overfloen dump.
    If this is also not the case try reducing the packet size.
    Let me know if the issue is resolved.
    Regards,
    Ashwin

  • Problem about fill set up table

    Hi all,
    I got a problem when I run the fill set up table for sales billing data source. what I did is:
    first delete the setup table then oli9bw->type in a sales document no.(as I only want this order data), then give a run name, last execute, but I got the message as follow:
    Data source 2LIS_13_VDITM contains data still to be transferred
    Could you pls explain what this means, and what should I do to solve the problem
    Thanks

    Set up table definition
    Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
    So once historical data is loaded you can delete the contents of the set up table.
    name is extract sturcture of your data source + setup
    also data is taken from setup table when an init / full/ full repair load is done.
    so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
    You can find the contents SE16
    Filling set up tables
    transac LBWG
    + SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
    set up tables
    Set up tables
    Set up tables
    view of set up tables data in se11??????????
    Set Up tables..
    lo: delete set up tables: DOUBT
    LBWQ is the extraction queue and RSA7 is delta queue. Data is sent to delta queue from extraction queue through collective job scheduled in transaction LBWE.
    when we want to extract the data using LO Cockpit, the data will be come to the extraction queue first and from there it will processed to the delta queue. SO lbwq works as a outbound queue.
    If the update mode is Unserialised V3 then as soon as the document is posted it comes update table which you can see in Tr. Code SM13. After the jonb is scheduled the records come to RSA7 i.e delta queue from which BW pulls the data
    If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
    So in If you are going to do Setup table filling, delete the data from LBWQ.
    The usage of Extraction queue(LBWQ) comes in to picture in delta loading. But actually system starts collecting the data (whenever there is document creation in R/3) after activating the EXtraction structure.
    Steps to Be Performed
    We know that there are 4 types of delta extraction that are available in LO. If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
    Here is Roberto's weblog:
    /people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
    /people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
    /people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
    check this out...
    LBWQ - T code is for what?
    Ttransaction LBWQ
    What is LBWQ?
    Assign points if it helps
    Hope it helps
    regards
    Bala

  • How to fill set up tables with out missing the delta records

    Hi,
    I would like fill set up tables in the productioon system of apllication of logistics.
    Can you please guide me how do we perform.?
    What are points to be considered?
    Because,when i start the filling  set up table by 10.AM if there are any posting at 10:05,10:06....like that
    how can collect them i.e will i miss any records in second delta run?What setps to be taken care?
    Thanks in advance
    Naresh.

    Hi.
    You can fill the set-up tables during normal operation hours ,if you load the data into ODS and the update queue is 'Queued delta' .Downtime is needed to avoid the duplicates .But if you use  'Direct delta' you miss the delta documents. Hence it is better to go for downtime approach for this case.
    Initially your delta records will be stored in the extraction queue and then when you run the collective job, records will be moved into delta queue. You can run the collective job (LBWE) anytime after the init run.If you need a daily delta ,then schedule this job before the delta loading. You can schedule this job either hrly or daily .This will move your records into delta queue. At the time of delta loading ,all your delta queue records will be moved into BW .
    Thanks.

  • 2LIS_11_VAHDR - Filling set up tables chanceled

    Hello,
    I set up a new cube. Here filling set-up tables of application 11 is necessary.
    The job chanceled. Error message:
    Error converting quantity: unit KG numerator 0 denominator 0 (doc. 75555833)
    Is there a possibility to start from the point where it failed or is a complete new start
    (delete of set-up tables of area 11) necessary?
    In the corresponding set-up tables I don't see the doc.-numbers.
    Than

    Hello,
    thanks for you input!!!! It was very helpful.
    As I understand - ALL documents must be correct in order to fill the set-up table.
    Over the weekend I scheduled the job again - chanceled after 24 hours.
    I set the no. of records to be ignored = 999.999. Nevertheless the job failed.
    Question: Is there a way to find out how many douments are wrong? I assumed in the job-log....but here was only a doc. number.
    By the way - it's all in production system.
    Any idea how I can proceed? ...time slot for weekend on the system is already reserved.

  • Monitoring multiple background jobs with CCMS

    Hi,
         Can multiple background job be monitored with the help of CCMS.If yes then    is it adviseable to go ahead with that or not?
         Say the number of jobs to be monitored are 1000 in SCM.....
         If yes plz suggest me how the same can be done ?
    Regards
    Siddharth

    Yes Multiple jobs can be monitored using CCMS .. You dont have to monitor all the jobs , you can restrict it by entering the job name in ALBTCMON . The following link will be helpful
    http://help.sap.com/saphelp_nw04s/helpdata/en/1c/48803d48de0610e10000000a114084/content.htm
    Thanks
    Prince Jose

  • Divide the billing due list into multiple background jobs and start them si

    Hello Gurus,
          How to divide the billing due list into multiple background jobs and start them simultaneously?
    Many thanks,
    Frank

    Hello Frank,
    Check this:
    http://help.sap.com/erp2005ehp_03/helpdata/EN/dd/561076545a11d1a7020000e829fd11/frameset.htm_
    plz assign suitable points, if this helps.
    Rgds,
    Raghu.

  • Error while filling set up tables for 2LIS_11  data sources

    hello All ,
    I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
    Job started
    Step 001 started (program RMCVNEUA, variant &0000000000005, )
    Start of order processing
    Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
    Job cancelled
    Is there any setting required in R3 side before filling setup tables of SD ?
    I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
    Regards ,
    Amol Kulkarni
    Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
    Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

    Hi,
    one of the sales document currencies is not maintained properly in the system and therefore its failing.
    you need to correct those documents before filling the set up tables.
    Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
    This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
    generally you will see the sales doc number in the error for which its failing.
    May be at the time of filling some óne was working on some sales document and tried it save it.
    correct that doc and fill the set up tables again.
    Thanks
    Ajeet

  • How can i enter multiple sales order numbers to set up table

    Hi,
    I need to reload about 8,000 sales orders to the set up table and the SO numbers are very scattered, so i can not enter them as a range. In transaction OLI7BW Sales Document field has no multiple selection option, therefore i have to enter the documents ONE BY ONE! Could you please tell me if there any faster way to enter them?
    regards,
    Tansu Aksu @ CHEP

    Try this link..
    http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
    Regards.
    PS: if it help you, pls assign points.

  • Background job  step - Printer - Output device  table

    Hi,
    When creating background job, printer- output device also specified for every step. Which table to check for job name and output device combination ?
    Thanks.

    Hi Raj check table TBTCP

  • Issue in Filling set up table

    Hi,
      I am facing issue while filling the setup table for Quality management datasource.
      Error message:
      No summarization result is selected,
      Message no. MCEX105
    Thanks,
    Ram

    Hi Ram,
    I hope you are using the same tcode - Go to Txn OLIQBW
    give the Name of run and execute in Background.
    I hope you done the same thing, if not please let me know
    Regards,
    Kiran

  • Restart init after filling set up tables

    hi,
    I already filled sd billing set up tables and completed a successfull init load. i guess i made a mistake and pulled all conditions data from r/3 at once. now i have the data successfully in psa but the problem is further updating psa data to ods is taking to much time. so i want to delete this init and split the loads. would this be a problem for set up tables? any suggestions to solve this problem is greatly appreciated..

    i have like 20 millions of billing condition data and i have loaded only 2 million of it so far in a week.
    i have only the start routinebelow, and two currency conversion routines in the update rules (conversion to group and local currency). but i have these same routines (even more) for the other ods's (invoices, orders, etc.) and i updated 2-3 millions records frpm psa to ods in few hours.
      clear: i_comp_code[],
             i_comp_code[].
      clear: i_material,
             i_material[].
      select * from /bi0/pmaterial into table i_material
        for all entries in DATA_PACKAGE
        where material = DATA_PACKAGE-material
          and objvers  = 'A'.
      sort i_material.
      select * from /bi0/pcomp_code into table i_comp_code
        for all entries in DATA_PACKAGE
        where comp_code  = DATA_PACKAGE-comp_code
          and objvers    = 'A'.
      sort i_comp_code.
      delete DATA_PACKAGE where kstat eq 'X'.

  • Error while filling set up table for Inventory

    Hi,
       While filling up setup table for Inventory, 2lis_03_bf, i get an error, Plant F041 doesnot exist. I am trying to fillup the table without any selections. Can anyone please suggest me a solution.
    Thanks,
    Praveen

    Please check the following link:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
    Hope it helps you.

  • T-Code to Fill Set Up Table

    Hi Experts,
    Can I have list of T-codes which are used to Fill Setup table for Differnt Applications.
    Thanks,
    DV

    OLI0 C Plant Maintenance Master Data      
    OLI1 INVCO Stat. Setup: Material Movemts      
    OLI1BW     INVCO Stat. Setup: Material Movemts
    OLI2 INVCO Stat.Setup: Stor. Loc. Stocks     
    OLI2BW     INVCO Stat.Setup: Stor. Loc. Stocks
    OLI3 PURCHIS Statistical Setup      
    OLI3BW     Reorg.PURCHIS extract structures BW
    OLI4 SFIS Statistical Setup      
    OLI4BW     Reorganized PPIS Extract Structures
    OLI5 PMIS Statistical Setup      
    OLI6 Periodic stock qty - Storage locatn      
    OLI7 SIS Statistical Setup: Orders      
    OLI7BW     Reorganized VIS Ext. Struct. Order
    OLI8 Set Up SIS for Deliveries      
    OLI8BW     Reorganized VIS Ext. Struct. Del.
    OLI9 SIS Statistical Setup: Billing Docs      
    OLI9BW Reorganized VIS Extr. Struct. Bill.      
    OLIA C Maintenance Processing      
    OLIB PURCHIS: StatUpdateHeader Doc Level     
    OLID SIS: Stat. Setup - Sales Activities      
    OLIE Statistical Setup - TIS: Shipments      
    OLIF PPIS: Setup-RepetitiveManufacturing     
    OLIFBW Reorganized Prod. Extract Structure      
    OLIIBW Reorg. of PM Info System for BW      
    OLIM Periodic stock qty - Plant      
    OLIP C Plant Maintenance Planning      
    OLIQ Reorganization of QM info system      
    OLIQBW Reconstruct QM Infosystem for BW      
    OLIS LIS in the IMG      
    OLISBW Reorg. of CS Info System for BW      
    OLIX Stat. Setup: Copy/Delete Versions      
    OLIZ INVCO Stat.Setup:Invoice Verificatn     
    OLIZBW     INVCO Stat.Setup:Invoice Verificatn

  • Background job , how we set report width

    Hello,
    when i run a report in background, 'Background Print Parameters' window appears. Here i see various values filled default. Like a name in Spool Request -- Name. Report page -65. Report width --450.
    How is Report width set = 450.
    Can you please explain this to me.
    regards

    ok SAMANAT one more query how do 'NAME' is filled under tab 'Spool Request'.
    regards
    Message was edited by: Surpreet Singh Bal

Maybe you are looking for