Multiple Cameras with one Instance of FME

Hello,
I am using FME 3.0 for upstreaming to Justin.tv and I am very satisfied, and it works perfectly.
Now I'd like to add effects, like Captions to my Stream and switch between different cameras. I have tried ManyCam which provides me a virtual webcam which I can easily add as Source to FME, but if I switch sources in ManyCam it needs several seconds to start the inactive camera and shows a black screen until the chosen camera is active.
Additionally I'd like to use effects when switching from one camera to another like fading in, or gemoetrical effects, like door opening etc.
The main problem is that I cannot see the live pictrure of an inactive camera in ManyCam,
What I am asking you for is to recommend me software which provides multiple camera feeds to combine/switch live to a virtual webcam.
I know that wirecast supports all this, inclusive the upstream to my server, however I'd like to stick to FME and I cannot afford wirecast. My budget would be less than US$200.
Anything you can recommend?
Thank You
Wolfgang

Installation guide:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000718044&_OBJECT=011000358700000291922009E
page 37:
4.1.7 SAP Solution Manager Client Strategy
SAP delivers a client with a standard configuration for SAP Solution Manager as part of the installation
process. Client 000 is the initial configuration client, and client 001 is provided for productive use.
Additional clients can be created if desired
So I don't see an issue...but i would not recommend it...

Similar Messages

Create multiple folders with one click on documents tab in BP in SAP CRM

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Multiple iPhones with one one computer

I was using multiple iPhones with one one computer, each iPhone device has it's Owen Apple ID. When I connected my device. I got my mothers photos, contacts & applications. All my applications are deleted, is there a way to retrieve my iPhones photos and applications ?

Sign out of your mom's account in itunes, then sign in with your account, then restore your phone from your itunes backup.

Multiple selections to multiple layers or multiple files with one go ?

Hi,
how to convert multiple selections to multiple layers or multiple files with one go ?
Thanks!

You may want to ask over at
http://forums.adobe.com/community/photoshop/photoshop_scripting?view=discussions
or
http://ps-scripts.com/bb/
I think there are Scripts about for the task or at least ones that could be adapted without too much problems.
The usual approach is, I think, creating a Work Path from a Selection and then using (expanded) Selections based on the individual subPathItems to intersect with the original selection.
Of course there are possibilities for bad results …

Photoshop crashes while using multiple windows with one image

Has anyone else encountered the following problem:
Photoshop CS4 crashes sooner or later when working with multiple windows with one image (window->arrange->new window for...).
I remember having same problem since CS2. Is this a bug in Photoshop or am I having a bad luck?
Technical specifics:
Ps CS4, iMac, 21.5, 10.6

Don't know. I haven't heard of other people having that problem.
Do you have a crash report I could look at?
Or have you attached your email to crash reports sent to Adobe and can you tell me the date on one of them?

Create multiple delivery with one invoice

Hi all,
can you tell me how to do multiple delivery with one invoice,
i tried in vf01 by giving their my 3 delivery nos but it is generating three invoices
pls explain this in details
points will be rewarded
regards,
smmmmmm

Dear Sameer
As per your requirement run the Tcode VF04 (Billing Due list) and select the Delivery Documents for which you want to to have single Billing Document by clicking on Collective Billing document/Online Push Button in that screen.
To Have Single Billing Document for Multiple Delivery you need to have Payer,Terms of Payment,Incoterms(part 1 and part2) same for all materials orelse the billing document will split and this split analysis is visible during creating of Billing document.
Hope this will help you in solving your problem.
Regards
PSH

Select or deselect multiple rows with one single selection event

Does anyone know how to create a JTable which can select or deselect multiple rows with one single selection event in JTable. Fore example, if the table has
row1
row2
row3
row4
row5
row6
What I need is when user select row1 or row2, both row1 and row2 should be set to be selected. Then if user press CTRL and click one of row3 or row4, both of them should be selected including the previouse selected row1 and row2.
For deselection, if row1 and row2 are selected, when users deselect one of row1 or row2, both of them should be deselected.
Hopefully someone can give me a hint.

Here is a partial solution using a JList. Only one line gets highlighted when the user makes a selection in the list. But, two lines are returned. There is a blank line between every two lines.
     private void addLineToList() {
          String a = f_one.getText();
          String b = f_two.getText();
          if (a.length() == 0) {
               Utils.showInformationMessage("Item field is empty.");
               f_one.requestFocusInWindow();
               return;
          if (b.length() == 0) {
               Utils.showInformationMessage("Match field is empty.");
               f_two.requestFocusInWindow();
               return;
          model.addElement("item: " + a);
          model.addElement("match: " + b);
          model.addElement(" ");
          int size = model.getSize();
          pairList.setSelectedIndex(size - 3);
          f_one.setText("");
          f_two.setText("");
          f_one.requestFocusInWindow();
     private void editList() {
          if (pairList.getSelectedValue().toString().equalsIgnoreCase(" ")) {
               Toolkit.getDefaultToolkit().beep();
               f_one.requestFocusInWindow();
               return;
          if (!f_one.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Item field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               OptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          if (!f_two.getText().equals("")) {
               int result = JOptionPane.showConfirmDialog(this,
               "The Match field contains text. Replace the text?",
               "Flash Card Activity", JOptionPane.YES_NO_OPTION,
               JOptionPane.INFORMATION_MESSAGE);
               if (result == JOptionPane.NO_OPTION) return;
          String item = "";
          String match = "";
          int index = pairList.getSelectedIndex();
          String choice = model.getElementAt(index).toString();
          if (choice.startsWith("item")) {
               item = choice;
               match = model.getElementAt(index + 1).toString();
               model.remove(index);
               model.remove(index);
               model.remove(index);
          else {
               item = model.getElementAt(index - 1).toString();
               match = choice;
               model.remove(index + 1);
               model.remove(index);
               model.remove(index - 1);
          int size = model.getSize();
          if (size > 2) {
               pairList.setSelectedIndex(size - 2);
          f_one.setText(item.substring(6));
          f_two.setText(match.substring(7));
          f_one.requestFocusInWindow();
     }

Use multiple iPhones with 1 instance of iTunes?

Hi Guys,
Be gentle with me as this is my first post and I'm not sure if this is correct discussion board, anyhow...
I have been tasked by my bosses to do some research on the possibility of using iPhones as a business communication, email and document device to be used by the senior management of my firm.
Basically, what we need is to be able to "sync" calenders, receive email, share documentation and contacts all using one instance of iTunes. This is to enable us to keep their data uptodate and identical etc.
The users also have the option of using iTunes at home to do non business work i.e. upload music and videos.
I am aware of the apple configuration tool to create multiple but identical "profiles" that can be applied to each and every phone.
My questions are:
1. Can we use one iTunes account (billed to the company using one credit card?) that can used by several staff at home? Or do we need to create accounts for every user?
2. Is there any applications that can help us "sync" all phones either connected to our business version of iTunes or even "over the air"? Bearing in mind that if the user connects to iTunes at home it doesn't wipe important data!
3. Can anyone recommend applications that we can preload onto the phones that will assist the user becoming familiar with the functionality of the iPhone? This would help us as we wouldn't have to show each and every user how the iPhone works!
4. Lastly any advice on applications that would give us the ability to control and maintain all these instances of iPhones easily and without giving us a major headache?
Thank you for any advice.
MC

You should check into MobileMe. It's an Apple service that allows you to sync mail, contacts, and calendars over the air to your iPhone.
My wife and I both have iPhones and use MobileMe to keep them identical in terms of contacts and calendars.
You could use one iTunes account with multiple iPhones, however, you're not going to get over the air syncing.
Message was edited by: Benjamin Brossard

How do I create multiple TEBs with one submit button on one page in Captivate 7

I've read other posts on this topic (which refer primarily to earlier versions of Captivate) and am still at a loss as to how to put multiple text entry boxes on a page with one submit button. Here's my scenario:
I am creating test questions.
Each test question has multiple text entry boxes (for numbers only).
Student should be able to enter numbers into the textboxes in any order.
Then there is one Submit button that should initiate validating all the text entries, and move to a scoring page (so I can test it). (What would be best is if this button not only did the above, but also submitted scores to the LMS. But that is not my question at this time.)
I'd like this question to be set up as a template so that I can duplicate it, be able to add or delete text boxes and change the values required in the text boxes.
Here is an image of a sample question page with multiple TEBs. The yellow boxes tell the student where they need to enter text:
Any help or direction to help is appreciated!!

I think the problem here is that Arlhoolie wants all of the different TEBs to behave as if they were part of a single interaction that submits only ONE result to the quiz. Using multiple TEBs in Captivate means that you have multiple scored objects and therefore multiple results being submitted to the quiz.
If you want a single Success or Failure result submitted to the quiz based on the results from multiple interactive objects then there really is no simple way to do it. But you could try using the Infosemantics Interactive Master widget to combine all the TEBs as slave objects that report to the Master Widget, which then reports a single score to the quiz based on the results from the slave objects.
You can learn more about the Master widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/interactive-master
http://www.infosemantics.com.au/interactivemaster/help
You can download a free trial version of the widget here:
http://www.infosemantics.com.au/adobe-captivate-widgets/download-free-trial-widgets
One caveat you should be aware of is that this widget is not HTML5 compatible.

Multiple tasks with one click

My work involves manually changing multiple lines to a different graphic style, and then moving that line to a different layer. As it is now, I am changing the graphic styles, choosing Select < Same < Fill & Stroke, and then moving the lines to the appropriate layer. I am wanting to know if there is a way to change the graphic style, and move the line to the different layer with one click. I'm ignorant when it comes to scripting, but was wondering if there are any scripts that would perform this function.

You need to fully explain the setup. Otherwise, people making suggestions are just guessing. Here's my suggestion, based on what little information you have provided:
You don't need a script for this; you can do it with a set of very simple Actions. Example:
Assume your repetitive task requires three Layers, named Red, Green, and Blue. On each Layer, all objects need to have the same Graphic Style applied.
1. New document. Create three Layers. Name them Red, Green, and Blue.
2. Define three Graphic Styles. Name them Red, Green, and Blue.
3. Draw an object (any object; a square, a line, whatever). Send it to Layer Red. In the Attributes Palette, type "Red" into its Note field. (This effectively "names" the object "Red".
4. Draw an object, Send it to Layer Green. Type "Green" in its Note.
5. Draw an object. Send it to Layer Blue. Type "Blue" in its Note.
6. Draw an object on Layer Red. Select it.
7. Actions Palette: New Action. Name the Action "Red." Set its color to red. Start recording:
7.1 Edit>Cut
7.2 Edit>PasteInFront
7.3 Apply Graphic Style Red
7.4 Stop recording.
8 Actions Palette: Select the Cut step. From the flyout menu select Select Object.... In the resulting dialog, enter "Red". OK the dialog. The Action should now have a new Set Selection step listed after the Cut step.
9. Actions Palette flyout menu: Button Mode.
Now you have an Action named Red that appears as a red button in the Actions palette. Select an object. Click the button. The object is moved to Layer Red, and gets Graphic Style Red.
10. Turn off Button Mode. Duplicate the Action. DoubleClick the duplicate. Change its name to Green and its color to green. Edit its Set Selection step to select the object named Green. Replace its Graphic Style step with a step that applies Graphic Style Green.
11. Similarly duplicate and edit one of the two Actions to create a Blue Action. Put the Actions palette back in Button Mode.
Now you can select any number of objects, and then move them to the Red, Green, or Blue Layer and apply the appropriate Graphic Style wiht one click.
Now come back and reveal the specifics of your actual situation which renders all that work moot.
JET

Controlling multiple movies with one button

Hi flash gurus,
I have 4 movies of the same length running on my stage in the
FLV playback component, with different instance names. I also have
a single play/pause component. I want all of the movies to play
together and unpause/pause when I press the play/pause button.
However, I have only been able to get the play/pause button to
control one of the movies (the last one listed in the
actionscript). I'm using the following code to attach the
play/pause component to the FLV playback movie:
FLV_instance_name1.playPauseButton = PlayPause_instance_name
FLV_instance_name2.playPauseButton = PlayPause_instance_name
FLV_instance_name3.playPauseButton = PlayPause_instance_name
FLV_instance_name4.playPauseButton = PlayPause_instance_name
When I use this, the play/pause button only controls the
FLV_instance_name4 movie. How do I get it to control all 4 moives?
Any help is much appreciated. Thanks!

PS, I'd also prefer for the controls to be detatched from any of the viewers, if possible. Thanks!

HT1495 syncing multiple ipads with one master ipad

Does anyone have any advice on getting multiple ipads (aprox 10) to sync with one master ipad?

Without connecting the iPad to your computer ...... Launch iTunes and go to Edit>Preferences>Devices. Turn off auto sync by clicking on the box at the bottom that says ..... Prevent iPods, iPhones ...etc. Click OK. Quit iTunes
Connect the master iPad to the computer and launch iTunes.
Transfer any purchases from the master iPad into iTunes via File>Transfer purchases from the menu at the top of iTunes or right click on the iPad name under the devices heading and select Transfer Purchases. Let the process complete.
Next .... right click on the iPad name on the left side of the iTunes window under the devices heading and select - Backup. Let the backup process computer. Then sync with iTunes and eject the iPad
Connect the next iPad and right click on the iPad name under the devices heading and select - Restore from backup. Select the backup of the first iPad and let the process complete and then sync with iTunes. Eject the iPad.
Connect the next iPad and follow the same procedure and do the same with the rest of the devices.

ISV embedding database with one instance per server limitation

Hi All,
As an ISV, it would be nice for Oracle to provide a better embedding solution than a silent install then having to script the creation of, or restore the database. Not because it's too complicated for an ISV to script, but purely for speed reasons. It's much faster to copy pre-loaded data files onto a machine than to create empty data files, load the data in, perform an analyze and any other scripts on the database. Dems just my thoughts.
However, my real issue is regarding the 'one instance per server' install limitation. As an ISV, if I choose to embed Oracle XE in my application - how can I 'guarantee' that my product can be installed on any given server. Picture this:
- We submit a proposal/ tender for a license to our software.
- Client, in conjunction with their IT dept adds internal costs, identifying servers that will run on, responsibilities, project plans (the whole works) etc.
- Client gets signoff from their management and pays for license.
- Client goes to install our software using Oracle XE just to find that another ISV has their software with Oracle XE embedded installed on the server.
- Client either has to find/ buy another server, or we lose the license. Either way, client is unhappy.
Am I missing something here? Is anyone else anticipating this problem?
Brad

Hi Florin,
Thanks for the response.. a good suggestion and our schema would be < 1GB so size would hopefully not be a problem. However, as soon as we plug into another appliation's Oracle XE implementation - we've potentially lost control of the database and it loses it's "embedded" nature. Probably not a huge problem if it's an application independant implementation of Oracle XE by an IT person, but if it's another ISVs embedded database - the dramas could start.
We effectively put our user's database within the control of another application who may not have considered the possibility of our data residing there. eg. They could do a 'drop-all' and we lose our database. Or tune the database right down and our application suffers. Or the user uninstalls that application and it decides to automatically remove Oracle XE (after all, that ISV thought it was an embedded application, right?). Do you see the potential issues?
Perhaps Oracle XE isn't as attractive for ISVs as first thought... I guess at the heart of the issue is the fact that Oracle XE isn't really an embedded database. It's just a database you can [silently] install with your application and then becomes a general db on the machine.

Physical connection of multiple cameras with EVS

how i can connect 5 GIGE vision cameras with EVS and i`m using vision builder as software and i have terminal block that its manual
http://www.ni.com/pdf/manuals/374051c.pdf
the number of inputs of it not enough to the 5 cameras i wanna connect.

I have for each camera one input 24v pulse comes from PLC and I dedicated ISO 8 for it and three outputs TTL1, for camera triggering TTL2 for light triggering and TTL3 for decision making. When I`ll use the 5 cameras I`ll need 5 inputs like ISO8 and 15 outputs from TTL...which is not available with the terminal block accessory which the vision builder software i use configured only ISO 5 and ISO 8 and TTL1, TTL2, TTL3 and TTL4 for pulse generating which not enough to my whole application...how i can get such number of inputs and outputs

How to iMessage between multiple devises with one apple id

We have 2 iPhone 4S an iPad 2 and a iPod touch. How can I use imessage for all the devices with one apple id

Try this complete previus discussion:
Re: iMessage between iPhone, iPod, iPad under same Apple ID

Multiple Cameras with one Instance of FME

Similar Messages

Maybe you are looking for