Multiple Class Type for Material Master

Hello Everyone,
I would like to ask where in configuration can I setup Classification so that for each Material Master it can have Multiple Class Type. (such as 001 - Material Class, 023 - Batch, 300 - Variants).  Because currently I can only see 023 - Batch whenever I create a new Material Master.
Thanks.

Hi,
Check the configuration, have you maintained default class type for material type.
Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

Similar Messages

  • Multiple class types for material master classification display default.

    Hello,
    We are running on R/3 4.7.  We use several different class types for our material masters (001 and Z01).  The problem this creates is the end user having to constantly tell the system which class type to use when going to the classification screen for different materials with different class types.  If a user views one material's classification page with a particular class type (001) then looks at another material with a different class type (Z01) the system tries to pull in information from the last materials class type (001).  The system tells the user there are no assignments for the class (001) in the material their viewing but there is one for class type (Z01).  The user then has to select the class type that applies to the material master their trying to view.  Is there a way for the system to automatically see when a material has only one class type assigned to it for it to automatically default it in without the user having to specify the class type?
    Thanks,
    JRW

    Hi,
    Check the configuration, have you maintained default class type for material type.
    Logistic General> Material Master> Basic Setting> Material Type> Define attributes of Material Types>Select the material type> Double click on material type--> Class type
    Edited by: P. Dhamane on Jun 4, 2010 3:21 PM

  • Need to create a Store Business document type for material master and store a sharepoint link

    Hello,
    I need to create a Store business document type for material master and store a URL link . How do I do that?( or is there any functionality to upload a document for a  store business document that it will automatically saves to sharepoint?)
    Thanks,
    Ran.

    >
    dhayes12 wrote:
    > A)  When I do the (Material Backflush) MFBF for the 04 type, the Inspection Lot gets created OK.  I then can go into QA32 and assign the correct Inspection Plat by clicking the Inspection Lot button.
    >
    > B)  When I do the MIGO via the Purchase Order (type Z01), it will not create the Lot if I have the Multiple Specs selected in the QM Material Master MM02.  If, I turn off the Multiple Specs in the QM Material Master and create a new PO and MIGO, it will create the Lot, however, it automatically assigns the lot to the wrong Inspection Plan (2nd Plan see above)  I need to be able to select the plan like I can with the 04 type.
    >
    > Is their some setting that can be changed in Config or somewhere that acts the same way as example A above?
    For case A, create insp plan with usage "1- production" If you have one IP with this usage for given material then system will assign Plan to lot automatically. In your case for second plan update usage as 1.
    For case B, system should assign 1st plan make sure for both plan udage is correct. for 1st plan usage should be 5 while 2nd plan usage should be 1. Now if your 1st have status 4 and key date before lot date then system will assign plan auto.
    Thanks!!!

  • Message Type for Material Master Data Changes

    Hi all
    I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
    Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
    I would like to replace this message type with another one (RS0020) in order to align different systems.
    Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
    So I would like to know:
    1. How is the message type related to the DataSource 0material?
    2. is it possible to replace a message type for BW?
    3. if yes, how can I do it?
    Thanks in advance.
    Elisa
    mail: [email protected]

    Hi Oscar!
    At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
    But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
    E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
    I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
    As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
    That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
    But message types referred to MARA field changes are different between the two systems.
    And it seems they are automatically created.
    Is it true?
    Thanks
    Elisa

  • PM : Does PM support multiple  Class types for Equipment classification

    Hi,
        Do  Plant maintenance support multiple class types for the classification for the equipments.
    Our  Customer has created his own class type other than 002(Equipment) for the classification and wants to know weather PM supports such class types or not.
    Thanks and Regards,
    Anuj
    Edited by: Anuj Goyal on Mar 13, 2008 10:16 AM

    hi
    i think you can use the your own class type provided you have done all the settings related to the standard class type 002,also if you have create your class type your standard class type will be changed to either the newly created one or 002 based on settings made by you
    regards
    thyagarajan

  • Maintain Text Types in Material Master

    Hi,
    Is it possible to maintain different text types in the materials master "Sales text" tab just like we can maintain at the sales order header and item levels.
    In VOTXN there is no option for configuring text types for material master (text object MVKE) so I was wondering that if it is possible at all. Please let me know if you have any idea on the same.
    Regards
    Deepak

    Hi Deepak,
    In Material Master you can maintain the "Basic data text". It can be maintained in Basic data 1 view by selecting the Additional data. This text can also be fetched according to your requirement with the help of developer.
    Thanks,
    Sravan

  • Need  to find the class type for a material

    Hi all,
    i need to find the class type for the material.
    is there any FM or the table where i have both MATNR and KLART fileds.
    Kindly reply asap.
    Thanks
    Sri

    Hi,
    There can be multiple class types assigned to a material. You can view this in the classification tab in the material master transaction.
    You can pass the MATNR to OBJEK field of KSSK table after using neccessary converison Exit to get KLART(Class Type). It will return you a 3 digit Class type. You can find the description of the class from the class type master table TCLA.
    Hope this helps.
    Edited by: Priyabrata Samanta on Feb 11, 2008 11:43 PM

  • Is it possible to maintain two class type for a material

    Dear All,
    Is it possible to maintain two different class type for a material.
    If a material assigned with the batch and the material is a part of variant configuration, then how to handle this scenario.
    For Batch Management, class type will be 023, for Variant Configuration class type will be 200.
    How to handle this scenario.
    Please explain.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on Jan 5, 2011 5:19 AM

    Mr.Raja
    As far as my knowledge, it does NOT make sense to assign a material to more than one class type.
    We can assign many classes to  a single class type of  a material.
    For configurable material, create the material using material type : KMAT.
    & then, activate the 'batch management" control in the material master, for that material.
    Pls revert with feedback.
    Hope, that helps you.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • More than one class type for a Material

    Hi All,
    We have a requirement of using a Material for Variant configuration. So we need to assign Class type 300 for that Material.
    But that Material is Batch managed. So Class type 023 is already assigned. I am unable to extend the Material to Class type 300.
    I searched forum, it is given that, it is possible to maintain different Class types for a Material.
    But I tried, I couldn't do that.
    Please help me to extend a Material to another Class type.
    Regards,
    Raja Durai

    Hi Raja,
    You can maintain different classes for same material.
    Go to material master and go to Classification view. Go to Extras->Change class type (F7)
    Now you can add a class of different class type.
    Please see below snapshots for more details.
    Thanks,
    Dattatreya N R

  • Custom class type for Plant material

    Is there any way to create a custom class type for plant and material? Any other way to use standard functionality to use classification in material master for specific plan will also work.
    thanks,

    Hi Rahul,
    The Classification data in material master can only be maintianed at Client level and not at plant level.
    The standard Class type 001 can be used to create your own classes. Create a class for each applicable plant. Add the applicable characterstics under every class. That way you will be able to maintain plant spceific details when you are adding Objects for the material master.
    Regards,
    kathir

  • SRM and MDM for material master in SRM contracts for multiple R/3

    Dear all,
    my question is:
    We are implementing SRM 4.0 in classic scenario with multiple R/3 back-end and we want to set-up Global Outline Agreements in SRM in a multi-backend environment where the Material Master are not harmonized.
    We heard that MDM and COntent Integraton can be a solution.
    Then detailled question is:
    Can we have 2 material numbers (e.g. ABC and XYZ) in 2 different R/3 systems refering the same product.
    Have the mapping done in MDM (Content Integrator?) to a third material number:123
    Replicating the material master 123 to SRM from MDM(?)
    Create global Outline Agreements in SRM for Material Master 123.
    Distribute the GOA as Outline Agreement to R/3 system 1 with the translation to ABC and to R/3 system 2 with the translation XYZ, all of that during the distribution step (or another).
    Have the call-offs quantities correct on 123 in SRM and BW?
    IF yes, how is it working, do you have some documentation discribing the scenario and the config steps to do?
    Thanks in avance

    Hello RD,
    That's a good question.
    You are on the right way. MDM is the tool for you.
    But..
    Content Integrator (CI) was first developped for Shell, to address the need of cross-referencing of material/supplier/category IDs, for:
    - reporting purpose (actual Spend Analysis)
    - mapping purpose (send of XML PO)
    CI was later "fusionned" into the new MDM (1.0) solution.
    So now, you can not order CI without MDM (even if some SRM slides still present CI).
    But mapping API where developped for all inboud/outbound interfaces in SRM, for materials only (good luck for you).
    You will find everywhere this piece of code:
      Call ECI
        CALL FUNCTION 'BBP_PRODUCT_MAP'
          TABLES
            it_input          = lt_mapping_in
            et_output         = lt_mapping_out
          EXCEPTIONS
            logsys_not_found  = 1
            driver_not_found  = 2
            product_not_found = 3
            internal_error    = 4
            OTHERS            = 5.
    So it is ok, you have the mapping call, but I don't know if all the rest of the process was really "finalized" (call of API mapping in CI, via XI). I personnaly never used it, but I assume it should work.
    I my opinion your process is supported by SAP:
    - Extract materials from both R/3 and consolidate them as a single product in MDM.
    - Distribute this product into SRM.
    - Maintain contracts on those products.
    - Distribute them to R/3 (The ECI call is also used during contract distribution).
    - Call offs corrects in SRM and BW
    For MDM documentation, look at netweaver area of service.sap.com.
    For MDM/SRM integration, look at SRM 4.0 spend analysis:
    https://websmp206.sap-ag.de/~sapdownload/011000358700004424262004E/GlobalSpendOverview.ppt
    For SRM contract distribution, call-offs, BW, look at SRM in details in service.sap.com/srm/SRM4.0:
    https://websmp206.sap-ag.de/~sapdownload/011000358700001966382004E/contracten.ppt
    For SRM5.0, see online help on help.sap.com.
    Rgds
    Christophe

  • Kindly give authorization object for mrp type in material master

    Hi friends,
    Kind tell me what is the authorization object for MRP type in material master.
    Your help is considered more important.
    thanks in advance
    willaims

    hi,
    check your authorisation objects here:
    Go to PFCG --> Environment (at menu bar) --> authorization objects --> Display...
    Here see for MRP and MM for material managament in the tree structure...
    Regards
    Priyanka.P

  • TCode for collective changes in inspection type in Material Master

    Hi
    Can any one tell me the TCODE for mass changes for inspection type in Material Master.
    Charuhas

    you can use MM17 or through LSMW or create a BDC through ABAP.
    Regards,
    qsm sap

  • Valuation class in the material master

    hi all, we maintain split valuation materials, namely domestic & imported. we are working on project based scenarion planning strategy 21 : MTO/project.
    in daily practice user convert unrestricted stock to project stock with 412 Q mvt type before MRP RUN.
    but for some when user try to convert stock following error occurs. I check stock available, it is available. but i do not understand why this error comes.                                                             
    Maintain the valuation class in the material master first
    Message no. M7232
    Diagnosis
    The system found that you have defined your own valuation classes for sales order stock and project stock in Customizing. However, these valuation classes have not been maintained in the material master record for the materials concerned.
    Procedure
    So that the relevant accounts can be posted upon goods movements, you have to maintain the valuation classes for sales order and project stock in the accounting view of the material master record for the material concerned.
    If you have authorization to do so, you can change the material master record.

    Hi,
    The normal valuation stock refer to relevant table valuation class field MBEW/MBEWH-BKLAS
    Special Sales Stock refert to MBEW/MBEWH-EKLAS
    Projeck Stock refer to MBEW/MBEWH-QKLAS
    Cheers,
    Girang

  • Item Category and MRP type for material is not allowed

    Hello all,
    I got a Error Message:
    <b>Transaction Z113 is not defined (Message no. V1347)</b>
    <b>Diagnosis</b>
    This combination of item category Z113 and MRP type for material is not allowed.
    <b>System response</b>
    The system does not allow further processing of this item.
    <b>Procedure</b>
    Check your entry.
    You can display the combination defined in table TVEPZ, which controls scheduling line category determination, and change it as required if you have the authorization to do so. The MRP type for the material may be changed in the material master.
    <b>The SD Configuration seems all right, I have:</b>
    Sls Doc Type (<b>VOV8</b>) – ZA9 (no delivery type assigned)
    Item Category (<b>VOV7</b>) – Z113
    Assigs Sls Doc & Item Ctgry (<b>VOV4</b>) – ZA9/ZNOR/blank/blanl/Z113
    ZNOR = Std Item-Av. chck  Del
    ZNOR defined in MM03/Sls Org 2
    Define Schedule Line (<b>VOV6</b>) = Z7 (without delivery)
    Z7 has FLAG on Prod Allocation
    Assign Schedule Line (<b>VOV5</b>) = Z113/ND/Z7
    At table: TVEPZ
    I have the entry: Z113/ND/Z7
    Guys, what would?
    Please help me out because I am stuck in this issue.
    Thanks a lot,
    Barbara

    Barbara, this may be tied to Strategy Group on the Material Master (I can't read enough into the detail)
    Item Category determination + MRP Type for your schedule line type ties to a Sched. Line category(this you know)
    New Rqmts class gets tied to a Rqmts Type
    New Rqmts Type gets assigned to rqmts class
    Strategy, assign the Rqmts Type to it
    Strategy Group, Assign the Strategy  to it
    MM02 [MRP3 view] strategy group should be the one that ties together (all the other ties
    It may be something in this area that you need to trace through ?
    Bill

Maybe you are looking for

  • I want to find out if OLAP is installed on the current setup.

    Hello Guys, These is something new. I have to check if OLAP is installed on the database server. This is to take care of the following error message : ORA-00604: error occurred at recursive SQL level 1 ORA-12663: Services required by client not avail

  • Exciting! BT Infinity being rolled out - could I h...

    Hello, I've been watching excitedly as the FTTC has been rolled all over our town (Ramsbottom) and the new Huawei cabs are being put in place. Hoorah. We are due to get Infinity in Q1 2011 and it's looking great. Our nearest cab is being installed to

  • New treemodel is set but view does not update?

    How does one refresh a view? I mean if I set another treeModel using setModel then how do I update this to the view instead of it displaying the original? It sets the new model and my debugging statements show it goes all through the setting up of th

  • How to get a snapshot from a video

    What is the best way to get a snapshot from a video file. Preferably something that can be converted to a psd.

  • No app store on my mac

    I am using a Mac Book Pro. My version is 10.7.5, and I use Mac OS X, I have app store on my Mac Book but the image is not the real app store image, it is a pencil on a piece of paper. If I try to open App Store the screen just flashes then goes back