Multiple computers with different versions of iPhoto

I have a Macbook Air with iphoto 11 installed version 9.2.1 . Also, I have an Imac G5 with iphoto 09 version 8.1.2 .
Both computers use the same apple ID .
If I buy from the app store, will they see the apple ID and say installed???????
Could I use dropbox to move the iphoto 11 to the computer with iphoto 09 installed.
Is this possible and how do I do it?

If you purchase from the MAS then you can install on whatever machines you can access the MAS from.
Just make certain your G5 is compatible first.
Don't drag from one machine to another.
That won't work.

Similar Messages

Sharing Files Amongst Two Computers With DIFFERENT Versions Of Windows (XP & Vista)

I just bought a WRT54G4 Wireless-G broadbad router & am a n00bie to this whole networking thng. As things stand now, I have got everything whereas both my desktop PC (Windows XP Home Edition) & my wireless laptop PC (Windows Vista Home Premium) are online (Both local & Internet) HOWEVER I cannot seem to get things whereas my desktop PC shares files which can then be viewed & otherwise accessed by the laptop.
Here's what I'm trying to do....
* Have BOTH computers access the Internet via private network (This I have already managed to do)
* Have the desktop share files which can be accessed (Wirelessly or not) by my laptop
Essentially, I want to be able to make use of BOTH HDs as needed.
My desktop is an old AMD Duron 1 Ghz. computer with 512MB of RAM & can handle SOME small tasks however the big gun is my laptop (A 1.86 Ghz. Intel Pentium with 3 GB of RAM). Because of it's speed & memory, I'd like to have the laptop handle the larger & more intensive tasks.
Although my laptop has a smaller HD compared my desktop (A 136 GB HD in the desktop (Out of 200 GB) compared to a 141 GB (I'm guessing this HD is around that size but since it came pre-installed & I'm currently leasing-to-own, I don't know), I'd like to be able to make use of BOTH HDs if at all possible. All I need is for the two computers to see the two HDs & all the files on it.
I have tried the setting up of file sharing as instructed elsewhere on the Linksys site, but lost it when I restarted both of my computers since that's what the page told me to do (I followed the Windows XP as the desktop has all the files I want to be shared & Windows XP is the OS of the desktop). Should I have not done this?
Also, my ultimate goal is to GET RID of the big bulky monitor which I have plugged into the back end of my desktop PC & just simply use the laptop instead since it doesn't take up so much room on the desk. Is there a software-based "Virtual Monitor" or monitor emulator of some kind which I can download (FREE please ) that will allow me to see the desktops of all the computers on my network just as if I
had REAL monitors? If so, where might I find one?
In short, whle I have accomplished a great deal in these last few days since I bought the router & linked the two computers together, as you can see, I still need some help & I've got some learning to do.
Any help I can get wouldbe MOST appreciated.
Cheers
Pat Cook
Denver, CO
Message Edited by asmyworldturns on 07-06-2009 06:32 PM
Solved!
Go to Solution.

File & Printer Sharing IS enabled on the desktop (Which has all the files I wish to share) HOWEVER.....
Ricewind wrote:
Make sure File and Printer Sharing is Enabled...
Also make sure both the computer's are in the same workgroup...
The default workgroup name in Windows Vista has been changed to WORKGROUP. In WindowsXP, the default workgroup name is MSHOME...
Also go into the computer software firewall on each computer, and set it to "trust" the other computers on your network.
If your firewall or PC security program keeps a list of trusted applications (also known as a "trusted zone"), then make sure that your router is in the trusted zone on your firewall...
As indicated before, both computers have DIFFERENT operating systems. The laptop has Windows Vista HP installed while the desktop has Windows XP HE installed. As such, are you suggesting that I stick with the default workgroup names just to keep things simple?
As for the firewall & other security software, I have Windows Defender plus SpyBot (Desktop only), ThreatFire & AdAware (The latter I rarely use since ThreatFire fills this need rather nicely). Would I have to go into Defender on both computers & tell it to trust the other computer? Network Magic already does this with both computers (Yes, I have Network Magic installed on both computers).
Cheers
Pat Cook
Denver, CO

Issues with connecting macs with different versions of iphoto

I connected my iphoto 09 on my macbook pro with my girlfriends iphoto 11 on her macbook pro to transfer some photos. However after I transfered these items to her mac I now find that even though the photos still exist on my mac, iphoto 09 will not open and says because I have connected to a newer version of iphoto I will have to upgrade.
Even though I like macs I don't need or want to upgrade, I can't reinstall iphoto from my setup discs so The only option is to spend £75 on something I don't need. Can anyone give me any advice?
Many thanks

When you opened the library with the newer version you were warned this would happen. You chose to ignore that warning.
Your options are
1. Upgrade iPhoto to iPhoto 11. This doesn't cost £75. An iLife 11 disk costs less than £50. Better yet, you can simply buy iPhoto on the App store for less than £15.
2. Restore from back up - You do have a back up, right?
3. Recover your phots from the Library and start over from scratch.
Regards
TD

C4780 Printer, Multiple computers with different OS.

I have successfully installed my C4780 photosmart on a Macbook Pro (wife's Computer) that uses 10.6 Snow leopard. I want to add my computer which is a Macbook and has the 10.5 OS. I understood that you could only run either version of OS with the printer. If I try to add my computer to the printer, will it mess with the settings and not allow me to print from the Macbook Pro with the 10.6 version OS ?
Do I need to upgrade my Macbook OS to 10.6 or higher to get this printer to work for both computers?
Thanks for your help

Is your printer connected to your wife's Mac by USB or is it connected to your wireless router. I will assume the later.
If it is connected to a router, you can easily add it to a Mac running 10.5. Get the latest software for your printer from the "Support & Driver" link at the top of this page and install it. Select "Network" (or similar) when it asks what kind of connection.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have multiple computers with different id's on m...

hello, i have skype on different computers (3-4) and each has its own id (login info)
and when i am logged in and others in the house are, we dont see each other online. why?

You can sync any number of iDevices to a single iTunes library - as I said in my earlier response, you can easily set up one or more playlists that are associated with each iDevice and configure sync behavior based on those. What you can't do (in general) is sync one iDevice with more than one library.
In simple terms, this is what you need to set up:

I have multiple computers with different itunes libraries, I dont want lion to share these libraries

I am upgrading to lion,
I have multiple laptops and ipads, however I want to keep my itune music libraries separate.

Yes. By enabling iTunes Match on each computer, each library will be scanned and the Songs will be Matched or Uploaded to the cloud.
Do look carefully at the User Tips area of this forum to help you with the neatest route to success.

Firefox 4.0 The menus flash like a keyboard key is held down. Can't access them even with all plugins turned off. Same issue on multiple machines with different versions of Windows. How can this be resolved?

FF 4.0. The menus flash like a key is being held down making them inaccessible. The problem persists with all plugin's turned off. Firefox box in top left corner not showing. The old FF logo show there instead.

Turning off hardware acceleration worked in all cases.
With hardware acceleration enabled the menu flashing did not occur on the primary display, only the secondary display of a two-monitor system.
Windows 7, ATI Radeon 4800 series.

ARD won't save multiple computers with same IP and different port!

I'm trying to access multiple computers over the internet behind a firewall with port forwarding.
I can access each computer, but ARD won't save the IP address and port (in IP Address column of ARD 3.1) of multiple computers with the same IP address. It will only save ONE. I've tried 'add by address', adding a list for each computer or adding a list for all those computers. Nothing has worked. ARD will actually change the first computer's IP address to 0.0.0.0
Example: Static IP address
Computer 1 xx.xxx.xxx.xxx:51 (public port 51 is forwarded to port 5900 on computer 1)
Computer 2 xx.xxx.xxx.xxx:52 (public port 52 is forwarded to port 5900 on computer 2)
Computer 3 xx.xxx.xxx.xxx:53 (public port 53 is forwarded to port 5900 on computer 3)
Has Apple really overlooked this or am I missing something? Isn't this how most people would remotely manage multiple Macs offsite?
Thanks

ARD cannot do this as you're asking. If your
workstations get their addresses from an NAT device
rather than being "real", the ports also need to be
forwarded in the router to the workstation's internal
IP address. ARD uses port 3283 for the reporting and
updating function, so if your Macs are getting their
IP addresses through NAT, since you can only forward
a port to a single workstation, you can only get
reports, push package/files to etc. for a single
workstation.
ARD uses the VNC protocol for observation and
control, though, and there are a range of IP
addresses for that protocol, starting with 5900. ARD
uses 5900 by default, so that port would be forwarded
to the first workstation. You would, I believe, need
to install VNC servers on the systems (since the ARD
client cannot listen on any port other than 5900
while VNC servers can be set for other ports such as
5901, 5902, etc. You would then forward 5901 to the
second workstation (and on to 5902, 5903, etc.). You
can then use the following information:
Remote Desktop 2: How to specify a port number
for a VNC client
to connect.
The only other options are: 1) to run the ARD
administrator on a workstation on the network, and
then take control of that system from outside, either
via VNC or another copy of ARD, or 2) set up a
virtual private network (VPN) so that when you
connect from outside, your admin system is officially
part of the local network.
Hope this helps.
That definitely helps. I have ARD installed on my MBP and on a workstation on the LAN. I have used ARD from the MBP to control ARD on a workstation on the local network, but it can get a little tricky. I already have VNC setup on all the workstations. I used to use COTVNC prior to purchasing ARD 3.1.
I guess what I'm really asking is...
How do I add a list of workstations and save the settings (same IP address for each workstation with different ports?) to control/VNC via ARD?
I simply want a list that shows each workstation, so I can control/VNC them using ARD offsite.
Name: Computer 1 IP Address: 123.123.123.123:5901
Name: Computer 2 IP Address: 123.123.123.123:5902
Name: Computer 3 IP Address: 123.123.123.123:5903
I don't want to have to manually type in the IP address into ARD every time.
Will ARD simply not add another computer to the list if it has the same IP address but different port number as a computer already on the list? I haven't been able to find a way to make ARD do this.

BO xi 3.1 u2013 schedule a template for multiple reports with different column

Hi,
I need to migrate the existing reports from SQL Server Reporting Services to BO, and the column order in the report is very important to the clients since clients have existing code to ingest these reports into their database. Now I want to schedule a single template with different parameters for all reports in BO, or create a single template with lot of parameters for all reports. My question is how I might use one template to create multiple reports with different column orders in the reports?
For example, client A has the following column order in their report: firstName, LastName, DateBirth, SSN. Client B has the following column order in their report: SSN, DateBirth, LastName, FirstName. Can I use one template to create these multiple reports?
Thanks!

Hi,
The only approach I can think of is to create a template report which uses variables
For each column you would need to variable
v_columnAName and v_columnAValue
v_columnAName would have a if statement in it
=if([client]="clientA" or [client]="clientC";NameOf([firstName]);if([client]="clientB";NameOf([SSN]);NameOf([lastName]));
v_columnA would have a if statement in it
=if([client]="clientA" or [client]="clientC";[firstName];if([client]="clientB";[SSN],[lastName]));
This would only work when you had a small set of clients.
This might be more managable if it was done in the universe
Regards
Alan

Single invoice for multiple orders with different divisions

Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIR

Hello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Can I Turn off iMessage in a group text with multiple people with different devices? There's 1 person in the group text that doesn't use iPhone anymore and they can't see any messages that are sent unless we send as regular text individually.

Is there a way to turn off iMessage for a group text that includes multiple people with different non-apple devices? When a message is sent, only the iPhone users can see the iMessage. Those without them cannot see the texts unless we send individual Text Messages or turn off iMessage completely.

now I have this and it still doesn't work.
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard1" "CoreKeyboard"
Option "OffTime" "1"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
Option "DontZap" "false"
EndSection

Multiple Orders with Different reasons on a Single day

Hi,
I am recently learning Device Management of IS-U Electricity. Now I have a problem with meter reading orders generated at the time of periodic meter reading with reason 01 and different system generated orders with reasons like 22, 21 , 16 and 11 which are the orders get created internally based on device replacement and modification.
If the scheduled meter reading date lies on the day or the day before of device replacement or modification, the meter reading for the periodic order is getting prorated based on the meter reading entered at the time of replacement or modification. This is what I dont want.
Is it possible to have multiple orders with different reasons on the same date? Any configuration changes are welcome.
- Arghya

Hi,
You can acheive this using following config changes.
SAP Utilities --> Device Managment -->Meter Reading --> Meter Reading Order -->Order Creation --> Define Automatic Interpolation for Meter Reading Reason.
Uncheck the 'Auto Interpolation' flag for Meter Reading reason 01.
This will not use the Replacement or Modifiaction read.
Let me know if anything more is reuiqred.
Thanks and Regards,
Ranjit Thakur.

Is it possible to use Adobe Illustrator in multiple computers with the same account?

Hi guys,
So our company is a small designing tile company,
we wanted to purchase the Adobe Illustrator and was wondering if it was possible to use it in multiple computers with one account, as we have two computers that are frequently use for designing, or do we have to buy two separated Adobes Illustrators for each computer?
Thanks

From the End User License Agreement (EULA):
2.1.3 Portable or Home Computer Use. Subject to the restrictions set forth in Section 2.1.4, the primary user of the Computer on which the Software is installed under Section 2.1 (“Primary User”) may install a second copy of the Software for his or her exclusive use on either a portable Computer or a Computer located at his or her home, provided that the Software on the portable or home Computer is not used at the same time as the Software on the primary Computer.
So, while it CAN be installed on more than one computer, they may not both be in use at the same time.
--OB

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

Multiple computers with different versions of iPhoto

Similar Messages

Maybe you are looking for