Multiple context mode, how to download the packet capture file
Hi guys,
Is there a way to download the packet capture file from a specific context? I know that I used to use https://<ASA_IP>/admin/capture/<capture> to download it if it is just one context.
The ASA uses mgmt 0/0 for management and it is connected in a separate OOB network. Only this network has TFTP servers for uploading the capture file. The context in question is in transparent mode. Its IP doesn't have access to any TFTP server.
Thanks!
Difan
Hello Difan,
Please refer the following document.
https://supportforums.cisco.com/document/69281/asa-using-packet-capture-troubleshoot-asa-firewall-configuration-and-scenarios
Also what version of the ASA code are you using?
Regards,
Jai Ganesh K
Similar Messages
-
Parameter in WEBADI How to Download the WebADI Excel File with Parameter
Experts, How to Download the Oracle Web ADI Excel File followed by entering Parameters which means the spread sheet should display the data dynamically based on the parameter provided by the end user. Can anybody share any hint or idea? Regards, Gaurav Nagpal.
Can anybody help me please!
-
Oracle WebADI: How to Download the WebADI Excel File with Parameter
Hello Friends,
How to Download the Oracle WebADI Excel File with Parameter??
For Ex: How to download the Employees for Specific Department from Oracle WebADI.
And After to change the specific changes on Employee Data to Upload.
Thanks in Advance.Hi Team.
Any Advise on it!! -
How to download the AppIntegrator zip file from the SAP Service Market Plac
Hi All,
I want to download com.sap.portal.howtos.webapp.par file from SAP Market Place. KIndly guide me how to download par file from market place.
Regards,
BidyutBelow documents will help you to download app integrator
Step-By-Step Guide to implement Application Integrator
Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator -
How to download the SAPPCUI_GP.sca file from service market place
hi
i want to download SAPPCUI_GP.sca file from service market place
could u please guide us.
Thank u very much.hi
Go to following url
<a href="https://websmp205n.sap-ag.de/patches">service market place</a>
click on <b>Enterby appliaction group</b> and the follow the given as below path
SAP Application Components> SAP ERP> SAP ERP 2004> Entry by Component>SAP XSS (Self Services) -
Remote Access VPN Support in Multiple Context Mode (9.1(2))?
Hi Guys,
I am currently running two Cisco ASA5520 (ASA Version: 9.1(2)) firewalls in Active/Standby failover and was contemplating the option of migrating my remote access VPN to these firewalls. However seeing that the new IOS now support mixed multiple context mode and dynamic routing. Is it safe to ask whether or not Remote Access VPN is now support in this IOS upgrade?
Multiple Context Mode New Features:
Site-to-Site VPN in multiple context mode | Site-to-site VPN tunnels are now supported in multiple context mode.
New resource type for site-to-site VPN tunnels | New resource types, vpn other and vpn burst other, were created to set the maximum number of site-to-site VPN tunnels in each context.
Dynamic routing in Security Contexts | EIGRP and OSPFv2 dynamic routing protocols are now supported in multiple context mode. OSPFv3, RIP, and multicast routing are not supported.
New resource type for routing table entries | A new resource class, routes, was created to set the maximum number of routing table entries in each context. We modified the following commands: limit-resource, show resource types, show resource usage, show resource allocation. We modified the following screen: Configuration > Context Management > Resource Class > Add Resource Class.
Mixed firewall mode support in multiple context mode | You can set the firewall mode independently for each security context in multiple context mode, so some can run in transparent mode while others run in routed mode. We modified the following command: firewall transparent. You cannot set the firewall mode in ASDM; you must use the command-line interface. Also available in Version 8.5(1).
Regards,
LeonHey Leon,
According to the ASA 9.1 Configuration Guide, Remote Access VPN is not yet supported with version 9.1(2). Only Site-to-Site VPN support in multiple context was introduced with release ASA 9.0(x). This was mentioned in the 9.0(x) release notes.
Regards,
Dennis -
Support IPSec VPN Client in ASA Multiple Context Mode
I've looked at under "Cisco ASA Series CLI Configuration Guide, 9.0" on "Configuring Multiple Context Mode", it says
"IPsec sessions—5 sessions. (The maximum per context.) ". Does it mean in ASA Multiple Contest Mode support IPSec VPN Client? I just want to confirm it because I can't seem find any doc that clearly spell it out. I'll appreciate anyone who can clarify it.
Thank Jason.
( Please direct me to the right group if I'm not for the first time I post it in the Cisco support forum)This is from the v9.3 config-guide:
Unsupported Features
Multiple context mode does not support the following features:
Remote access VPN. (Site-to-site VPN is supported.) -
Botnet Filter with multiple Context Mode
We used the Botnet Filter in Single Context Mode for a long Time. Now we converted to multiple Context Mode and the Database is no longer updated. In the system Context I can See the update settings but when I try to update the result is always "no DNS server". Since the system context has no interfaces there are no DNS settings etc.
How should be the Botnet Filter configured in Multiple Context Mode?
Thanks for any response in advance.sh run | grep dns
dns domain-lookup T-COM
dns domain-lookup COLT
dns server-group DefaultDNS
policy-map type inspect dns preset_dns_map
inspect dns preset_dns_map
ping update-manifests.ironport.com
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 204.15.82.17, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 160/162/170 ms
ping updates.ironport.com
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 80.239.221.64, timeout is 2 seconds:
ASA Version 8.4(2)
hostname DE-VM-TER-FW-02
enable password 8Ry2Yj8765U24 encrypted
passwd 2KFQnb6IdI.2KY75 encrypted
names
interface GigabitEthernet0/0.3207
nameif TR_v207
security-level 50
ip address 10.28.6.60 255.255.255.248
interface GigabitEthernet0/0.3208
nameif TR_v208
security-level 70
ip address 10.28.6.68 255.255.255.248
interface GigabitEthernet0/0.3209
nameif TR_v209
security-level 80
ip address 10.28.6.76 255.255.255.248
interface GigabitEthernet0/0.3210
nameif TR_v210
security-level 90
ip address 10.28.6.84 255.255.255.248
interface GigabitEthernet0/1
nameif COLT
security-level 0
ip address 217.111.58.46 255.255.255.240
interface GigabitEthernet0/3
nameif T-COM
security-level 0
ip address 194.25.250.94 255.255.255.240
dns domain-lookup T-COM
dns domain-lookup COLT
dns server-group DefaultDNS
name-server 8.8.8.8
object network COLT_dynamic_NAT
subnet 0.0.0.0 0.0.0.0
object network T-COM_dynamiy_NAT
subnet 0.0.0.0 0.0.0.0
object-group network DM_INLINE_NETWORK_1
network-object 10.0.0.0 255.0.0.0
network-object 172.16.0.0 255.240.0.0
network-object 192.168.0.0 255.255.0.0
access-list COLT_access_in extended deny ip any any
access-list T-COM_access_in extended permit tcp any object DEUAG01-actsync eq https
access-list T-COM_access_in extended permit tcp any object DEUAG01-portal eq https
access-list T-COM_access_in extended deny ip any any
access-list TR_3208_access_in extended deny ip any object-group DM_INLINE_NETWORK_1
access-list TR_3208_access_in extended permit ip any any
access-list TR_3208_access_in extended permit icmp any any
access-list TR_v207_access_in extended deny ip any any
access-list TR_v210_access_in extended deny ip any any
access-list TR_v209_access_in extended deny ip any any
pager lines 24
logging enable
logging asdm informational
mtu TR_v208 1500
mtu T-COM 1500
mtu COLT 1500
mtu TR_v207 1500
mtu TR_v210 1500
mtu TR_v209 1500
ip verify reverse-path interface T-COM
ip verify reverse-path interface COLT
ipv6 access-list TR_v207_access_ipv6_in deny ip any any
ipv6 access-list TR_v208_access_ipv6_in deny ip any any
ipv6 access-list TR_v209_access_ipv6_in deny ip any any
ipv6 access-list TR_v210_access_ipv6_in deny ip any any
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
object network COLT_dynamic_NAT
nat (any,COLT) dynamic interface
object network T-COM_dynamiy_NAT
nat (any,T-COM) dynamic interface
access-group TR_3208_access_in in interface TR_v208
access-group TR_v208_access_ipv6_in in interface TR_v208
access-group T-COM_access_in in interface T-COM
access-group COLT_access_in in interface COLT
access-group TR_v207_access_in in interface TR_v207
access-group TR_v207_access_ipv6_in in interface TR_v207
access-group TR_v210_access_in in interface TR_v210
access-group TR_v210_access_ipv6_in in interface TR_v210
access-group TR_v209_access_in in interface TR_v209
access-group TR_v209_access_ipv6_in in interface TR_v209
route T-COM 0.0.0.0 0.0.0.0 194.25.250.81 1
route COLT 0.0.0.0 0.0.0.0 217.111.58.33 20
route TR_v208 10.28.24.0 255.255.255.0 10.28.6.65 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
user-identity default-domain LOCAL
no snmp-server location
no snmp-server contact
telnet timeout 5
ssh timeout 5
no threat-detection statistics tcp-intercept
dynamic-filter use-database
dynamic-filter enable interface T-COM
dynamic-filter enable interface COLT
dynamic-filter drop blacklist interface T-COM
dynamic-filter drop blacklist interface COLT
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
inspect dns preset_dns_map dynamic-filter-snoop
service-policy global_policy global
Cryptochecksum:7bbe975fb39e189e99d8878787a0037
: end
System Context
dynamic-filter updater-client enable
Can't resolve update-manifests.ironport.com, make sure dns nameserver is configured -
HT1320 how to download the music on my ipod classic to my pc
how to download the music on my ipod classic to my pc
Some of the information below has subsequently been summarized by turingtest2 in the post at https://discussions.apple.com/message/18842615
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/ - Mac & Windows
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797 -
How to download the output of a report along with column header
Hi,
Could someone please tell me on how to download the output of a report along with column header to .txt format. A download option needs to be given to the user using physical and logical file names .The report basically contains header details and item details and requirement is to download the same format into an .txt format.Hello,
Try this FM:
Data: being of itab occurs 0,
matnr like mara-matnr,
maktx like makt-maktx,
end of itab.
data:begin of fld_tab occurs 0,
fld_name(20),
end of fld_tab.
fld_tab = 'Material'.
append fld_tab.
fld_tab = 'Material Desc'.
append fld_tab.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = 'C:\1.txt '
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = itab
FIELDNAMES = fld_tab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Naimesh -
How to download the application file to local file by back ground job?
hi:
can any one tell me how to download the application file to local file by back ground job? thanks in advance..
MonsonHi,
In order to download a file from application layer to a local file in background,
first write a report(ZREPORT1) in which do the following steps:
OPEN DATASET g_file_1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
loop the g_file and append all the data into another internal table.
end of this report you shd have all the data in the application layer file into your internal table.
Now create another report(ZREPORT2) and submit this report in background.
that is,
JOB_OPEN
JOB_SUBMIT and
JOB_CLOSE
and in job_submit submit ZREPORT1 which downloads the file in application layer.
Please reward points if helpful.
Regards,
Arul. -
In MEK3 Transaction How to Download the Display Customs % Values
Hi Friends, Please Guide me on this Issue
Once User enters MEK3 Transaction and he follows below Steps
Enters the Condition Type
Clicks on -> Key Combination Button
Checks the Radio Button -> Purch Org / Plant/ Vendor and Continue
After Providing Inputs for
Purch. Organization, Plant, Valid on Date User executes the report
Then the data is displayed in Table Control
Here the User needs to download the data which is displayed in the Table Control
By Navigating through SYSTEM -> LIST -> SAVE -> LOCAL FILE
Here LOCAL FILE is not in enable mode
So how can we make that LOCAL FILE to enable mode and achieve the Download functionality
Thanks & Regards
Ganesh
Edited by: ganesh yarramsetty on Mar 9, 2011 1:41 PM
Edited by: ganesh yarramsetty on Mar 10, 2011 7:27 PMHi,
whenever you click on Excel download option select spreadsheet instead of unconverted
There is a possibility of download the spool file as txt-file. .
Use Tranx SP01 - select the spool entry -->"spool request --> forward as text . You will find the file in your SAP work directory as <sid><spool#>.
or use fm RSPO_DOWNLOAD_SPOOLJOB.
Download in Background in Excel Format
How to download the data in excel format directly while executing in background mode?
If you will execute it in bacground with ws_download or download, it will be aoutomatically cancel. so what is the procedure to do this. How is can directly read the spool from program?
Download from background is possible, if you could setup the environment
1. create a custom table first
Table : Y001
Displayed fields: 4 of 4 Fixed columns:
MANDT BNAME Y_SITE Y_PATH
010 <userid> <site> cd <novell_path>
2. rewrite ws_download to z_download (light modification required, see attachment)
3. ask your basis team to make a copy of command FTP and CHMOD to ZFTP and ZCHMOD resp., make the setting according to your environment.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Hope this will will helps you,
Thanks and Regards,
Manjunath M
Edited by: manjunath4sap on Dec 23, 2010 6:20 PM
Edited by: Rob Burbank on Dec 23, 2010 9:02 PM -
Explain about transparent mode, single mode, multiple context mode
You can explain about the differents of transparent mode, single mode, multiple context mode in ASA 5500? Thank you very much.
Great question. Hope the below helps:
Transparent Mode: In this mode, the ASA will filter traffic without requiring L3 on the ASA. This means that in your config you will not put IPs on the interfaces to be used for traffic filtering. Thus, filtering is transparent to the traffic as the traffic isn't directly routed to the firewall. Think of it like you have a server plugged into a switch. In transparent mode, you place the ASA between the server and the switch and no configuration change is required to the server. In routed mode, you place the ASA in the same physical location between the server and switch, but have to change the server to use the ASA as a default gateway.
Single Mode: Default mode of an ASA. The ASA acts as a single firewall and all interfaces are provisioned to be managed through a single firewall configuration.
Multiple Context Mode: The ASA is split into multiple virtual configurations. With the ASA now virtualized, you provision the physical interfaces on the ASA to the virtual firewall configured. Each context has it's own configuration seperate from the rest of the firewall. Multi-context is meant for enterprises to invest in a single piece of hardware and scale it for use as multiple security devices.
Hope this helps. Let me know if you have anymore questions!
-Mike
http://cs-mars.blogspot.com -
How to download the values to excel from spool sap abap
Dear All,
I am facing a problem in downloading the Zreport to excel file ( where it consists of 95 fields) ,
1.if am running the report in foreground and downlaod to excel file , the all 95 fields are upadting in excel file .
2.if i am schecduling the programe in background and saving inspool, then form spool , i am download to excel file , at that time some of the fields are overllapning ,
for this i want to download t o excel file without overlapping fields,
can any one suggest , how to do same procedue.
regards,
manoranjanHi,
whenever you click on Excel download option select spreadsheet instead of unconverted
There is a possibility of download the spool file as txt-file. .
Use Tranx SP01 - select the spool entry -->"spool request --> forward as text . You will find the file in your SAP work directory as <sid><spool#>.
or use fm RSPO_DOWNLOAD_SPOOLJOB.
Download in Background in Excel Format
How to download the data in excel format directly while executing in background mode?
If you will execute it in bacground with ws_download or download, it will be aoutomatically cancel. so what is the procedure to do this. How is can directly read the spool from program?
Download from background is possible, if you could setup the environment
1. create a custom table first
Table : Y001
Displayed fields: 4 of 4 Fixed columns:
MANDT BNAME Y_SITE Y_PATH
010 <userid> <site> cd <novell_path>
2. rewrite ws_download to z_download (light modification required, see attachment)
3. ask your basis team to make a copy of command FTP and CHMOD to ZFTP and ZCHMOD resp., make the setting according to your environment.
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Hope this will will helps you,
Thanks and Regards,
Manjunath M
Edited by: manjunath4sap on Dec 23, 2010 6:20 PM
Edited by: Rob Burbank on Dec 23, 2010 9:02 PM -
SSLVPN/webvpn in multiple context mode?
We already know that ASA 9.0 supports site-to-site VPN in multiple context mode. But remote access VPN isn't supported. Obviously, SSL-VPN is a very important feature for most multi-tenant deployment scenarios where each context acts as a border firewall towards the Internet for each tenant. The alternative to terminate all tenant remote-access VPNs in one context means that each tenant would have to be routable from the ASA, which of course isn't a reasonable requirement in most cases.
So, what I'd like to do is to deploy an ASA cluster, and provide remote access VPNs for each tenant, where the connectivity for each remote access group can be addressed with whatever IP address space, and that goes into it's own VRF in the back-end.
As far as I can tell, this isn't doable with the ASA, since multiple context mode prohibits the use of remote access VPN, and I can't think of any other work-around than either having individual firewalls running in single context mode for each tenant, or demand that all tenants are interoperable routing-wise and configure a separate ip address pool in a single context mode for each tenant.
Essentially, there's no good way to implement this with multiple virtual firewalls, using cisco firewalls? Or am I missing something?If you set up a pair of single-context ASAs for VPN termination, configure a group policy per customer and use the 'Restrict access to VLAN' feature, you could separate customers' traffic and still just use one FW pair for all customers. This pair would connect to the same switch infrastructure as your multi-context edge firewall and thus allow a consolidated solution.
Sent from Cisco Technical Support iPad App
Maybe you are looking for
-
Hi, I want the duration taken for release of PR. I have the PR Creation Date but not the timestamp. I have the released date and timestamp for all levels. So I need the duration for release . All this I need for a report having the below details. PR
-
Using URL location from external file
Hello, I have a button that opens a new browser window that uses a URL that may change from time to time. Simple question: how do I set up the URL to be read from an external file so it can be changed without having to edit the flash file? Thank you,
-
How I fixed: You have been signed out problem in 2 minutes!
Very frustratingly I was having the same problem with Creative Cloud saying you have been signed out all the time, so I was reading through the forum and got some ideas, so this is what I did and finally I can get back to work and hopefully help some
-
Cisco HUM and subject of e-mail violation threshold
Hello! I'm use Cisco HUM Version & Patch Level:1.2.2. In Threshold Setup i create Threshold and notification e-mail. But i want to include in this e-mail a description of interface. How i can do it? Now, i have subject of e-mail: CiscoWorks HUM: Crit
-
My mac is suddenly running really slow framerate?
Processor: 2.9 Gz Intel Core i7 Memory 8GB10 MHz DDR3 Version: 10.7.5 Recently i've had some problems with my macbook pro, when i place the computer on my lap i usually do, any slight movement would cause this horrible sound to come out from the mac.