Multiple database operations in Database Adapter - please help

Hi,
I would like to have multiple operation in my database adapter. I drop the database adapter onto the composite.xml and follow the wizard. An adapter with one operation is created.
When I click the "Edit" button on it and run the wizard again, all the previous changes are lost, and only the new operation is present.
In the "Oracle® Fusion Middleware User's Guide for Technology Adapters 11g Release 1 (11.1.1.5.0) 9 Oracle JCA Adapter for Database" I read the following:+
While at run time you have Oracle Database Adapter instances, at design time you have the Adapter Configuration Wizard (link). You can run it once to generate a single adapter service end point, and then multiple times in edit mode to make incremental changes to each. It generates all the adapter related artifacts needed when deploying a SOA composite as Table 9-1 lists.
But I how do I change the Jdeveloper into the "edit mode" ??? I've been trying for hours, and I cant figure it out. Please help!!!

Hi Vijay,
did you actually test this? When I finish creating a DBAdapter, there is a operation present. Then when I click edit again on the DBAdapter, and I create another select, when I finish only the first operation is gone, and I can only see the one I've created via the last edit.
I dont understand your reply. Can I have two operations, each one with select underneath, in the same adapter?
Edited by: user13604541 on Jan 30, 2012 11:19 AM

Similar Messages

  • TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

    This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
    I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

    I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

  • Not able to use oracel database 11g express edition ? please help !!!

    after installing oracel database11g express edition , i am not being able to use it ,because when i click on  get started with oracel database 11g express edition it will divert me to ip  http://127.0.0.1:8080/apex/f?p=4950 and after this it show
    Oops! Google Chrome could not connect to 127.0.0.1:8080
    so please help me out , as i am beginner and new to this , so i don't have deep knowledge of this ,so please help me out ,as soon as possible 

    Hi,
    Provide more info like os and its version - https://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
    Did installation complete successfully?
    check if database is up
    start command prompt
    sqlplus / as sysdba
    select open_mode from v$database;
    check the status of listener
    lsnrctl status
    Post the output of above commands here
    Regards
    Yoonas

  • Executing web service operation with complex input - Please help

    Hi All,
    I am working on invoking a web service through ADF. The request format for the webservice consists of multiple occurance of same element. Below is sample request. here <index> is repeating n number of times.
    <soapenv:envelope>
    <soapenv:Body>
              <ns6:StoreDocumentRequest>
                   <ns6:docFileType>ABC</ns6:docFileType>
                   <ns6:Metadata>
                        <ns6:index>
                             <ns6:indexType>Format_Type</ns6:indexType>
                             <ns6:indexValue>ACROBAT</ns6:indexValue>
                        </ns6:index>
                        <ns6:index>
                             <ns6:indexType>Buyer_No</ns6:indexType>
                             <ns6:indexValue>1234567</ns6:indexValue>
                        </ns6:index>
                        <ns6:index>
                             <ns6:indexType>Document_Type</ns6:indexType>
                             <ns6:indexValue>101A</ns6:indexValue>
                        </ns6:index>
                        <ns6:index>
                             <ns6:indexType>Capture_Location</ns6:indexType>
                             <ns6:indexValue>XYZ</ns6:indexValue>
                        </ns6:index>
                   </ns6:Metadata>
                   <ns6:Content>XXXXXXXXXXXX</ns6:Content>
              </ns6:StoreDocumentRequest>
         </soapenv:Body>
    </soapenv:envelope>
    now I need to populate these values thrugh Operation binding in my managed bean class. I have also dragged these parameters and operation on my jsf page to get hold of those in my managed bean context. I am having following code in my managed bean to set these parameters.
    BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
    OperationBinding storeDocumentBinding = bindings.getOperationBinding("StoreDocument");
    storeDocumentBinding.getParamsMap().put("docFileType", filetype);
    storeDocumentBinding.getParamsMap().put("Content", filecontents);
    storeDocumentBinding.getParamsMap().put("indexType", filecontents);
    storeDocumentBinding.getParamsMap().put("indexValue", filecontents);
    storeDocumentBinding.getParamsMap().put("indexType", filecontents);
    storeDocumentBinding.getParamsMap().put("indexValue", filecontents);
    storeDocumentBinding.execute();
    Here I am facing some issues:
    1. The operation is not picking values put from ParamMap(). It is taking values as empty (as in my .jspx page form, I have made it hidden though). It takes value from my jspx page form, which is blank.
    2. when I am manually entering values in the .jspx page form, for <indexValue> and <indexType> tags, it is taking only one value (last one) for creating the request.
    3. the storeDocument() function is a SOAP based service. How can I check for SOAP response after operationBinding.execute(). I checked for response after execution, it sends an object as result. How to get a SOAP response from it.
    I need to fetch few values from the SOAP response and display it on screen.
    Please help me out. I am noob in ADF.
    regards,
    Rajan

    Hi Puthanampatti,
    I followed the link and did exactly as mentioned. Here is my code
    public String downloadDocument(FacesContext context, OutputStream out) throws IOException {
    BindingContext bctx = BindingContext.getCurrent();
    BindingContainer bindings = bctx.getCurrentBindingsEntry();
    OperationBinding retrieveDocumentBinding = bindings.getOperationBinding("RetrieveDocument");
    DCIteratorBinding attachmentsIterator = (DCIteratorBinding)bindings.get("AttachmentsIterator");
    String documentId = attachmentsIterator.getCurrentRow().getAttribute("Seq").toString();
    System.out.println(customSoapProvider.getRequest()); // getting null here
    AttributeBinding docFileTypeVal = (AttributeBinding)bindings.getControlBinding("docId");
    docFileTypeVal.setInputValue(522117);
    Object result = retrieveDocumentBinding.execute();
    System.out.println(customSoapProvider.getResponse()); //getting null here
    but I am getting a null response in the last line.
    what am I missing here.
    regards,
    Rajan
    Edited by: Rajan M on Jan 5, 2013 11:27 AM

  • Managing multiple sites in different iWeb versions - PLEASE HELP!

    apnewbie/cyclosaurus/roddy/old toad (and any others more knowledgeable than i):
    i've run into a bit of a pickle. i am hoping someone can help straighten me out. i am about to jump out of a window. here's the rundown:
    (for starters, i have a .mac account and am publishing to .mac.) i created a site in iWeb 1.1.2 on my work computer (mac book pro). worked great, really lovely. thought to myself, "hey, i'd like to create another site from home, but i don't have iWeb at home (powerbook G4) - i should buy iLife 08 so i can build these things from home and not have personal files on my work computer."
    so: i had a site that i created within 1.1.2 with files written to iDisk. i purchased iWeb 08 and would like to have another site, but this one is being created in 2.0. i also am using a personal domain name this time around bought with google apps and hosted by godaddy. i published the new work in progress for a test run and...you guessed it...my original 1.1.2 site was rewritten by the 2.0 site. and the 2.0 site comes up as the standard google search page for domains that aren't up and running. whooopsie.
    sorry for the lengthy intro, but that's the background. i guess my specific questions are:
    1) i want to be able to maintain multiple sites from iWeb 2.0...can i open my 1.1.2 domain file in 2.0 and successfully bring that site into 2.0?
    2) what is the most efficient and easiest way to get both of these sites running in 2.0? right now i have two domain files (created on two different computers).
    3) for domain management, is it best to move from the iWeb folder in my home library to different folders (one for each site, with separate domain files, and my 2.0 domain file is NOT called domain, it's the name of the site) to another location? (and of course, i will back these up just in case.) and when i want to update a site, i just open that individual domain file, right? or will these sites publish over each other?
    please help. i am at my wits end. i'm sure this is a relatviely simple issue, but i'm new to iWeb.
    thanks, thanks, thanks for your help guys.
    joojy

    joojy,
    Welcome to the forums!
    First of all, your original 1.1.2 site may not, in fact, have been overwritten. It is quite possible that the site remains in it's position on the iDisk, Web/Sites/iWeb/YourSite, but because you published to the iDisk (.Mac) from 2.0, a different index.html file has been placed in the root level Web directory which is causing the 404 error. Navigate to the directory on the iDisk, using the Go menu in Finder, and look to see what is actually there. Follow this path:
    Go/iDisk/My iDisk/Web/Sites/iWeb/YourSiteWillBeHereIfYourLuckIsGood
    If your site is there, great; if it isn't, it's not really a problem because hopefully you still have the Domain.sites file on the MacBook Pro and you can republish it if necessary. If it is there, you can modify the index.html file on the iDisk using a text editor and get your url redirected back to where it should be.
    Second, do not open your 1.1.2 Domain.sites file with 2.0 until you have a backup of this Domain file. External drives are best for this. Assuming the backup is in place, launch 2.0, choose the Domain.sites file, and click on "update". It will be updated to a Domain.sites2 file. If the site looks ok then continue on with editing/publishing.
    Skipping to question (3), by all means, abandon the default location of the Domain.sites file in the Home folder's Library and get accustomed to keeping your Domain files in their own, respective folders. When you want to open one just double-click it.
    You are going to encounter difficulties publishing multiple sites in 2.0.2, unless you keep all of the sites in a single Domain file. 2.0 is publishing to a different directory on the iDisk than 1.0; it publishes to /Web/Sites/, as opposed to /Web/Sites/iWeb/. Publishing a site from a separate Domain file erases previously published sites. I have been able to publish multiple sites, from multiple Domain.sites2 files, by mounting the iDisk and actually moving the Site folder back one level, into the root Web folder, and then publishing. When finished, I move it back again. If you have RSS feeds you will probably get a 'file in use' error. The alternative, (other than keeping all sites in a single Domain), is to publish the site to a folder and then manually drop the Site folder into the Web/Sites/ directory on the iDisk. Of course, some .Mac functions are lost when publishing this way.
    Work through this info and post back.
    -Mark

  • Wrt54g and internal wireless adapter - please help

    Okay, I'm new to this home networking so my lingo is non existence. I have a wrt54g wireless router.  Can I use this router with my labtop internal wireless adapter.  I assumed I could use this router w/out a modem or ISP, based on what the sales rep told me when I bought the router.  Patient and expertise would be greatly appreciated. Please help!!!!

    When you sign up with your ISP, they will likely provide you with (or sell you) a modem.  Be sure you get a modem with an "ethernet port" (sometimes called a 10/100 port) on it.  If the modem only has a USB port, you will not be able to connect to it with that router.
    Sometimes the ISP will give you the choice of a modem, a router-modem, or a wireless router-modem.  Since you already have a wireless router, all you need is a modem.

  • Cannot find the hana output adapter, please help me.

    I have downloaded the latest version of ESP in SAP software  Download center, here is the screenshot
    However, when I try to install the hana output adapter in the custom installation process, I couldn't find it. Here is the screenshot:
    please help me with it.

    Hi Kevin,
    The HANA Output Adapter is one of the adapters that is a part of every installation (assuming you installed ESP 5.1 SP04).  It was not available until ESP 5.1 SP01.  I know one of the links on the download site takes you to the ESP 5.1 GA release which did not have the HANA Output Adapter.  Double check the version you installed.  If you did not install ESP 5.1 SP04, see my blog post here on how to get it:
         Getting the latest release of ESP from the SAP Software Download Center
    If you did install SP04, it is already a part of the product.  Use the "F6" key to toggle ESP Studio into the Visual Authoring mode.  Then expand "Output Adapters" palette and choose the "HANA Output Adapter" by click on it once and then clicking on the canvas once.  See the attached screen shot:
    Make sure you have installed the HANA ODBC driver and add an entry to ESP's "service.xml" file as described here and you should be good to go:
        SAP HANA Output Adapter
    Thanks,
      Neal

  • I have a fairly new iPod touch and the touch screen has stopes working in certain places like the bottom row of apps and things on keyboard I have updated it and restored it multiple times it makes no difference please help!?

    I have a fairly new iPod touch and the touch screen has suddenly stopped working..... Like the bottom row of apps has stopped working and certain buttons on the keypad are not working at all what so ever I have taken it to the apple store once before they told me to update it I did so and it didn't get better I have also restored it multiple times still nothing I really would like a working I pod please help!!!

    If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • 'Database logon failed (LO 26603) - Please HELP ME!

    Hi everybody...
    i need your help for an authentication issue whit LIVE OFFICE connections from Xcelsius2008 to Crystal Report Server 2008.
    I've just connected other reports data in Xcelsius2008 but generating the SWF sometimes the SWFs can not logon and refresh the live office objects (ex. Crosstabs).
    The error message is the following:
    'Database logon failed (LO 26603)'
    During the SWF's generation in Xcelsius (Live Office), it requires me the authentication to Logon in the Database, if I insert the correct authentication, Xcelsius refreshes the data (downloaded by CRServer) but before that it shows the Preview, it requires the authentication for Crystal Report Server 2008;
    in this windows i select:
    Sys: ServerName
    User: Admin
    Password: Password
    Autentication: Enterprise
    After this step, for some SWFs the data are refreshed and it works correctly, other times it shows the same error: 'Database logon failed (LO 26603)'
    May you explain me why for some "live office connections" i have this problem and other times not?

    Hi
        There is a known issue  for live office database logon credentials in Xcelsius 2008 Release note document.
        "A Live Office-enabled SWF file using a Crystal Report that requires
    database logon credentials will fail to refresh. This occurs because the
    SWF file does not prompt the user for database logon credentials, even
    if required by the report.
        To ensure the data is refreshed properly, the SWF file and the Crystal
    Report must be saved to the same BusinessObjects Enterprise system.
    A BusinessObjects Enterprise administrator must then enter the report's
    database logon information in the Central Management Console so that
    credentials are not required when the report is refreshed."
      Woud you please check your LO and see whether it is the reason some work well and some not?
    BR,
    Sammi
    Edited by: Sammi Sun on May 7, 2009 8:02 AM

  • Error while migrating database into an asm instance please help out....  ;(

    RMAN> BACKUP AS COPY DATABASE FORMAT='+DGROUP1';
    Starting backup at 19-AUG-07
    Starting implicit crosscheck backup at 19-AUG-07
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=326 devtype=DISK
    Crosschecked 5 objects
    Finished implicit crosscheck backup at 19-AUG-07
    Starting implicit crosscheck copy at 19-AUG-07
    using channel ORA_DISK_1
    ORA-19587: error occurred reading 8192 bytes at block number 1
    ORA-17507: I/O request size 8192 is not a multiple of logical block size
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 08/19/2007 10:49:34
    ORA-19587: error occurred reading 8192 bytes at block number 1
    ORA-17507: I/O request size 8192 is not a multiple of logical block size

    below are my init.ora parameters could you pls suggest me the changes needed???? i'm very thankful for your response.
    *.db_cache_size=92274688
    *.java_pool_size=200094304
    *.large_pool_size=200094304
    *.shared_pool_size=255852544
    *.streams_pool_size=50331648
    *.pga_aggregate_target=25165824
    *.session_max_open_files=20
    *.background_dump_dest='/u01/app/oracle/product/SRAVAN/bdump'
    *.compatible='10.1.0'
    #*.control_files='/u01/app/oracle/product/SRAVAN/control01.ctl','/u01/app/oracle/product/SRAVAN/control02.ctl'
    *.control_files='+DGROUP1'
    *.core_dump_dest='/u01/app/oracle/product/SRAVAN/cdump'
    #*.db_block_size=8192
    #*.db_domain=''
    #*.db_file_multiblock_read_count=16
    *.db_name='SRAVAN'
    #*.job_queue_processes=3
    #*.log_archive_dest_1='LOCATION=/u01/app/oracle/product/SRAVAN/ARCH1'
    #*.log_archive_dest_2='LOCATION=/u01/app/oracle/product/SRAVAN/ARCH2'
    #*.log_archive_dest_state_1='ENABLE'
    *.log_archive_format='SRAVAN_%r_%t_%s.arc'
    *.open_cursors=400
    *.processes=300
    *.remote_login_passwordfile='EXCLUSIVE'
    #*.undo_management='auto'
    #*.undo_tablespace='UNDOTBS'
    #*.sga_target=167772160
    *.db_create_file_dest = '+DGROUP1'
    *.db_recovery_file_dest = '+DGROUP1'
    *.db_recovery_file_dest_size = 100M
    *.db_create_online_log_dest_1='+DGROUP1'

  • Lost database (I am a recruit.please help!)

    oracle 9.2 on w2000 advanced server pack3.
    I created 3 databases---myoracle,test,oemrep.
    run enterprise manager console.
    login with 'single mode'(s):I can find all 3 databases.
    (sorry, I am using a chinese version, so I do not know this term in English.)
    login with 'global mode'(L)/login Oracle Management Server:
    I can find only 1 database---myoracle.
    why? what am I to do?

    The error message changed as follows:
    Created dir: C:\DOCUME~1\mwb\LOCALS~1\Temp\wlw-temp-58723\wlw_compile14527\Schemas
    Compiling 309 source files to C:\DOCUME~1\mwb\LOCALS~1\Temp\wlw-temp-58723\wlw_compile14527\Schemas
    C:\DOCUME~1\mwb\LOCALS~1\Temp\xbean14531.d\src\org\w3\x2000\x09\xmldsig\impl\
    error: KeyInfoTypeImpl.java:784: ';' expected
    warning: target = (org.w3.x2000.x09.xmldsig.SPKIDataType)get_store()add_element_user(SPKIDATA$10);
    Warning: ^
    Error: X509DataTypeImpl.java:249: ';' expected
    Warning: {
    Warning: ^
    Warning: error: cannot read: C:\DOCUME~1\mwb\LOCALS~1\Temp\bean14531.d\src\org\w3\x2000\x09\xmldsig\SignatureMethodType.java
    I don't know why the java files that the workshop created have so many errors.

  • IOS database for shelter puppy rescue---please help!

    I am trying to find an IOS database app--I work for a non profit animal rescue.  Want to keep track of foster puppies, fosterers with locations, medical info etc.  Need to access contact info and photos.  What do you suggest.  We utilize Facebook to post puppy info.  Thanks.
    We want to be able to have a database of potential foster parents that we can email/text in a group when the puppies arrive.  We want to track who has what puppy, link that to a photo of the puppy, track health info, and then adopter info.  We need to link it all together.  Sorry---not that tech savvy.  Appreciate any suggestions for an app to use.  Luckily, all in the group have iPhones.  Thanks!

    Bento. Inexpensive, easy to use, syncs with various Mac applications.
    Matt

  • Database: Listener refused the connection -please help

    middlegen:
    [middlegen] Database URL:jdbc:oracle:thin:@localhost:1521:PUSSDB
    BUILD FAILED
    C:\cvs-1-11-17\middlegen\samples\build.xml:232: middlegen.MiddlegenException: Couldn't connect to database: Listener refused the connection with the following error:
    ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    The Connection descriptor used by the client was:
    localhost:1521:PUSSDB
    Total time: 8 seconds
    C:\cvs-1-11-17\middlegen\samples>

    Did you try a tnsping to see if it can provide name resolution? Can you connect to the database using the connect string service name such as sys@pussdb? These would indicate whether the database has been properly defined in your databse names resolution method (e.g. tnsnames).

  • Oracle Database Connectivity Problem.. Please Help

    Hi , i am having a problem in connecting my JSP page to Oracle. I dont know how to work from Scratch like which classes to download for driver and where to put them so that it works for me please also help me in writng connection String. i am writing this code but it generates an error.
    <%
    try
    Connection conn=null; // defining variable
    Class.forName("oracle.jdbc.driver.OracleDriver");
    conn = DriverManager.getConnection("jdbc:oracle:thin:@serverName:1521:myDatabase", "scott", "tiger");
    Statement st = conn.createStatement();
    String sql = "SELECT * FROM POS";
    ResultSet rs = st.executeQuery(sql);
    String name = rs.getString("DNAME");
    out.println(name);
    catch(Exception e)
    out.println(e);
    %>
    and the Error is
    java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
    I shall be thankful to you for your help.
    Regards,
    Adeel

    Thanks for your reply and sugession. We cannot stop
    using JSP actually. I meant while learning JDBC and attempting to debug it.
    I have been working with ODBC
    drivers and haven't got any problem. Now here you are
    talking about Class.... We haven't download the
    driver yet thats what i was trying to ask that from
    where to dowload those drivers/classes and where to
    put them or how to config them . Your Help is always
    appriciated because it can be really crucial for some
    one else. Any way Thanks again hope to see a reply
    from you.That isn't what your OP suggested. It suggested specifically that you didn't know what a class not found exception meant.
    You can down load the drivers from oracle. Or you can get them from the Oracle client install - just drill down under the install directory.
    As for where you put them, it would be the same place that you put the other drivers that you already have experience with.

  • Database hang....Please help

    Hello,
    We are currently running a client sever based aplication with
    PB 5.04 as front end and ORACLE7.3.4 on Windows NT server. In a
    particular situation,we are calling a procedure using RPC(Remote
    procedure call). The procedure creates a user (Using DBMS_SQL
    pkg) and grant connect and then issues a grant to role to a
    user. Till granting connect there is no problem. But while
    grating the role to the user, it hangs. It returns only if we
    shutdown immediate.
    The current user who exectes this procedure has grant any role
    with admin option (through one of its role). Sometimes, it goes
    through fine, but not consistent.
    Can any one help. I really appreciate for your help.
    Thanks,
    RB

    What does the original client connection look like from the PB
    application? Am I logging on to the PB application as a user
    with no CREATE_USER priviledges?
    Let me know,
    Dan

Maybe you are looking for

  • Windows 7 desktop background

    Hi, I'm currently having issues with windows 7 backgrounds not displaying the wallpaper sent out through group policy but showing a solid colour instead. I've read that this was an issue what should have been fixed with a hotfix but I'm unable to app

  • ANN: J2EE Applications & BEA WebLogic Hardcopies Available!

    ** J2EE Applications & BEA WebLogic Hardcopies Available! ** The first hardcopies of the only programming book to cover J2EE & WebLogic 6 are now available. For those of you that have already ordered, we thank you. In just a few short weeks we have m

  • Study material for Logistics Execution Solution Consultant

    Hi, Can someone pls mail me the std SAP study material for the below mentioned topics SCM601, SCM630, SCM631, SCM660, SCM611. on [email protected] Regards Abhilash

  • Xellerate Provisioning of Oracle Users

    I am having a problem when i am trying to provisioning a user account to oracle db. After entering the required information and giving the user a database role of 'DBA', the user creation process completes successfully. However, when i try to login t

  • Trouble with GPU Acceleration in Premiere Pro CS6 (GTX 670)

    I recently bought a new GTX 670 with the hopes that it would accelerate my video editing in Premiere. After using the "nVidia hack" to add it to the list of CUDA supported cards, I started up Premiere, enabled GPU acceleration in the general project