Multiple Docks no longer working in OSX 10.9

Multiple Docks function in OSX 10.9 was working perfectly until about two hours ago. Suddenly only one of the two screens has a dock.
Using MacBook Pro (OSX 10.9) and Apple Cinema Display.
Any thoughts on how to fix this?
I did not change anything on my system between installation of OSX 10.9 and the moment when the new multi-dock functionality stopped working.
Have restarted the computer, but that did not fix the problem.

My audio stop working using Mac OS X 10.9. I've checked the audio setting and everything is turn on properly. I've also unplugged my computer speaker so that it's using only the built-in speakers. Still no fix. Please help!

Similar Messages

HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

Apple Wireless Bluetooth Keyboard no longer works after OSX update

After installing the latest OSX update yesterday (something about iChat encryption), Apple Bluetooth Keyboard no longer works with my iMac.
When I restarted the iMac after installation was completed, the iMac would no longer recognise my Bluetooth Apple wireless keyboard. I've tried with 2 other Apple wireless keyboards as well, but to no avail. None of them work with the iMac any longer. All 3 keyboards work with my PowerMac Quad G5 though.
The iMac "sees" the keyboards, but the pairing doesn't go through because the iMac doesn't seem to recognise the keystrokes when entering the pairing code.
I had to go out and buy myself a Microsoft wired keyboard to be able to restart the iMac (couldn't enter the login password without a keyboard).
My bluetooth mighty mouse works flawlessly though.
Very frustrating. Can anyone help?
...tt
iMac 24" 2.33GHz 3GB Mac OS X (10.4.8)

And yes I checked the batteries.

JBL Radial dock no longer works on iPhone 4 after iOS 5 upgrade.

JBL Radial dock no longer charges my iPhone 4 after iOS 5 upgrade however I still Can play music.
Any help on that ?

OK a bit of success over the weekend. Not sure if it will help you guys. So i have an IPHONE 3gs and it would not play any music through the JBL but it would ring (through the JBL speaker) and charge while connected.
I sync'ed through itunes and made sure i had the latest version of both itunes and the IOS on the phone. Then pushed some podcasts and albums down from my computer to the iphone through the computer.
This must have sone something as now everythign works fine. all radio and music apps now play through the JBL.
Hope this helps.

Belkin lightning dock no longer works with iOS8.1 update

I have the Belkin aluminium dock and since the update to 8.1 it no longer works with my iPhone 5S or 6 plus. I've tried reboots and resets, can't get it to work.
I just get the 'this accessory may not be supported' message.
Anyone have a fix for this?

quit iPhoto, Delete the iPhoto preference file ("your user name" ==> library ==> preferences ==> comn.apple.iPhoto.plist) and launch iPhoto and reset any personal preferences you have changed and if you have moved the iPhoto library repoint to it
LN

Scrolling on Magic mouse no longer work after OSX update

I have just performed an OSX update and after restarting I immediately noticed that the scrolling function and other gestures no longer work on the magic mouse. I have also noticed that no gestures work on the Mac Book Pro track pad. The only function that works on the mouse is moving the mouse pointer and the buttons. Same goes for the track pad. Some great update that was. Has anyone else discovered this and how do I repair this loss of function? When I first initiated the update, I saw that there was a download required which mention some improvements for the mouse/keyboard but mainly updates required to support the new magic track pad. Is it possible to revert this individual update and if so how? Thanks.

You were almost correct, but not quite. You can see updates in /Library/Updates. I'm not sure what receipts is, but it didn't contain the track pad/mouse update package I was expecting to see. However, I did eventually find it in Updates after a trip to my local Apple store. What happened was that the original update process completed about 95% but for some reason crashed. When I restarted, it appeared that there was nothing wrong, until that is I tried to use the mouse and track pad. I presume that the update process uninstalled the previous package but didn't actually install the new update. I downloaded the the latest update from Apple, but it appeared to be older than what I downloaded from the Update process, so it wouldn't install. I would suggest that here lies a bug. The package install process did detect the new trackpad / mouse package but it didn't detect that it wasn't installed and should have prompted me to install it.

Administration rights are required message comes up and creative cloud no longer works on OSX. Permissions show no errors. Please help

Creative cloud no longer works. Is there a patch?

I am Windows, but some saved Mac links that may help
-Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
-more Mac 10.9.3 https://forums.adobe.com/thread/1491469
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0

Multiple devices no longer work with Airport Extreme

I can’t get multiple devices to work with my Airport Extreme any longer. Normally, I have 4 wireless devices with my Airport Extreme: MacBook Pro, iPhone 5, Sony Wireless Blu-Ray Player, and Windows Laptop. On a daily basis, I use the MacBook Pro and iPhone 5 at the same time on the network. I have even had all 4 devices on the network without a problem.
Problem: Since last night, I cannot use any of the devices on the network at the same time. Every time I try to use two devices, I am asked to login into to my ISP and the device currently on the network is booted off.
Additional info: I live in an apartment complex and use the complex’s ISP. Unusually, since yesterday another device (my guess is a neighbor’s Airport Express) has been showing up in my AirPort Utility. I cannot access that device because it is password protected.
Attempted Solutions: I have tried a soft reboot, hard reboot, and factory reboot of the Airport Extreme, but still have the same problem. I have also cycled the modem on a repeated basis.
The ISP does not think it is their problem as I can still connect to them through either directly plugging into the modem/outlet or through the AirPort Extreme. The ISP has great customer service and are usually very helpful, so I don’t think they are trying to blow me off.
Perhaps, my AirPort Extreme’s settings are off.
If anyone can provide me with a possible solution, it would be greatly appreciated.

I have tried a soft reboot, hard reboot, and factory reboot of the Airport Extreme
A factory reset on the AirPort Extreme would have configured the AirPort Extreme to act as a router, providing normal DHCP and NAT services for your network.
But, the symptoms that you describe indicate that the AirPort Extreme's Router Mode settings may be configured for "Off (Bridge Mode)".....a setting in which another router at the apartment complex would be responsible for allowing multiple devices on your network to connect.
Using your MacBook Pro, we need to check the Router Mode setting on your AirPort Extreme as follows:
Open Finder > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon
Click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Please check the current setting for Router Mode and report on what that setting might be.......either DHCP and NAT......or "Off (Bridge Mode)".

My CF card reader no longer works with OSX 10.9

I am a video editor, I shoot my content on a Canon XF-305 which creates MXF files on CF cards. Until I updated to OSX 10.9 everything was fine and I used to insert the CF cards into my Kingston FCR-HS3 USB card reader and then import/convert the footage accordingly. However since the OSX update I can no longer access my video footage on my Mac. The card reader constantly throws up a generic error message through finder that says 'disk not ejected properly' even though it is still plugged in. I've only managed to import a few seconds using pavtube MXF converter before it all goes wrong. I have used FCP X, Canon disk utility, and pavtube MXF converter - all are up to date with drivers and software and none of them work anymore!
Just to let you know I've contacted Apple and all they said is to check all drivers and software are up to date - which I have done, although Canon has not released any OSX 10.9 plug ins or drivers yet - which might be a problem.
Kingston does have a firmware update, but only for PC.
My thought's were to go back to OSX 10.8 but apple told me I had to use Time Machine for this and the last time I backed up was ages ago and I will lose too much important data.
Someone please help???

Had the same problem with my Kingston FCR-HS3 Cardreader (FW 0123, bought Aug. 2012) when using it on my Macbook Pro Retina 2012 with MacOS Mavericks 10.9.1 on the USB 3.0 port. Trying it on my MacPro Early 2008 with MacOS Mavericks 10.9.1 on USB 2.0 port everything was okay.
When trying to update the firmware of my cardreader to version 0131 (on a Windows 8 notebook) which is only available for Windows, I had an error several times and could not update. After changing to another USB-Port on this notebook everything went okay.
Now my cardreader is working fine and I even notice a rise in transfer speed from 100 (before) to 120 MB/s when using fast CF-cards (600x or 1000x).

Key stroke to hide and ahow dock no longer works

I can no longer hit the keystoke (appleoptiond) to hide and show the dock. I can hold the key combination down and make the Dock disappear, but when I release the keys, the dock re-appears (think of an icon/pogo-stick). I'm running 10.4.6 on Dual 2ghz G5 . . . It worked just last week . . . any thoughts?
P.S. I've run both Onyx and Applejack, and reset both the p-ram and keyboard shotcut defaults . . .

Yadz,
And when you hit the same key combo, does the doc re-appear? Unfortunately-Yes...
If the plist removal did not work there is one more simple troubleshooting step you can try. Open Activity Monitor, find Dock and use the "Quit Process" command. The Dock will relaunch automatically. You could also repeat the plist removal procedure.
Are there any Keyboard Shortcuts in the Keyboard & Mouse System Preference that can explain the problem?
If none of that works create another user test account. Can you replicate the errant behavior in that new test account?
;~)

My dock no longer works properly

I cannot, for instance, get the little menu that appears when you hover over an icon that gives you options like remove from dock ... The items no longer bounce up and down, either. I believe I deleted some files when using some software to restore some unrelated files. I used a program called Pacifist, and it worked great except at one point it asked me a question about some files and that was when I think I made the wrong choice that affected my dock. Anyone know what steps I could take now to restore my dock to perfect shape?

Hello garage:
As it is difficult to know what you have done, I think I would run an archive and install (and then not use things like pacifist unless you know what the result will be):
http://docs.info.apple.com/article.html?artnum=107120
Barry

After installing Mavericks, dragging files to the apps in the dock no longer works. Getting " The Application Can't Be Found" error

Just installed Maverick and now the drag and drop file open from finder to dock apps doesn't work?
Looks like spacebar for quick look isn't working correctly either

I am annoyed by, I think, the same problem. I would like to drag Pages files directly to the finder in the dock, but now with Mavericks I can not do this. It is bothersome to have to click on the finder to open it up when I did not have to do that with the old operating system. I hope someone can help us both out.
I also hope that in the next update Apple addresses the concerns many are having with the newest version of Pages. Until something is changed, I am sticking with old Pages because I find it to be a much better program to use.

My iPad keyboard dock no longer works. Any suggestions on what I can do to bring it back?

I've had the keyboard / docking station / stand for over a year now and it has never given me any problems. A kid was touching a bunch of keys the other day and I'm not sure if it froze or has a shutdown mode or what...but it literally stopped working. It recognizes the iPad when I place it on the pins, but NONE of the keys work.
Help!!

Hi there BuffaloSailor!
I have an article here with some troubleshooting suggestions for this issue:
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Right-click in Dock no longer works

I just recently performed a security update on my iMac, and now when I try to do any sort of right-click action in the Dock (closing apps, emptying Trash), the menu shows up, but the menu & the Dock are momentarily hung. I can click around other items on the Desktop or Finder, but the Dock stays non-responsive for maybe 15 seconds or so. Anyone else see this, and if so any ideas? Thanks!

Thanks for the reply. I don't think an SMC reset is called for, since this issue doesn't really have a hardware component to it (i.e. power button not working, battery issues, etc.). The mouse button itself is not the issue, since other right-click events work fine, and it's only when right-clicking on the Dock that it sort of hangs a bit.

Quartz Screen savers no longer work in OSX 10.8.

They were made in earlier OSX versions and still run in OSX 10.7 on another machine. I see other quartz files in the Screen Saver folder in the Library of the 10.8 machine but mine won't work. Why does the System Pref window display the quartz files that came with the system but not the ones I made and inserted? Do I need to run these .qtz files through something or install them in a new manner? They show up in the window of the different folders fine and the preview of them show the animation just fine. They simply don't show up in the Screen Saver app in the System Preferences so are not able to be used.

I placed my older .qtz screensavers into system>library>screensaver where the screensavers and slideshows that came with the ML installation placed them. I have now used their names for my older .qtz files and when I use the System Preferences and look at Desktop/Screensaver I do not see my older qtz files, I only see the ones that came with the installation.
But, since I have renamed my older qtz file after one of the existing ones (Arabesque), when I choose Arabesque I actually engage my older qtz file. This allows me to use the file but does not answer why this is happening. Am I now limited to only the number screen savers that came with the installation as renamed files?
So, this discussion has helped me to do what I wanted but I have not solved the actual problem. There must be a simple explanation and way to use a file with its proper name.

Multiple Docks no longer working in OSX 10.9

Similar Messages

Maybe you are looking for