Multiple HTTP Servers, 1 for HTTP and other for HTTPS

I am trying to install 9ias 1.0.2.2.2 on 2 machines both running solaris. 1st machine hosts the database (8.1.7.4) and the other hosts the App server (9ias), what i am tryin to achive is have 2 listeneres. One for HTTP traffic and other for HTTPS traffic. Have anyone configured this and could shed some light and enlighten me.
With all the notes i have read i have understood that i need to basically install 2 instance of Apache in 2 different Oracle Homes. but my question is how can i just have one portal repository. or rather i should say if somebody could guide me from installing the 2 instance of Apache.
Thanks
Mir

You left out Twixl.
Bob

Similar Messages

  • I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more

    I have 2 apple ID one for Egypt and other for USA , now I try to update the software but I get a message said that this software download with other ID, then I logout and sign with second ID but i got the same message again ... Now I can not sign in more
    Any solution ?
    I'm using iOS 6.1.2 IPad 3
    Regards

    I have also noticed the same "problem".  I do not fully understand the impact of using the same ID on multiple computers and devices if I want to keep them all in sync.

  • I am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks.

    i am trying to detect signal peaks (derivatives of the peaks both +ve and -ve peaks). simultaneously 2 peaks detectors are running, 1 for +ve and other for -ve peaks. when a peaks get detected it would trigger a pulse of approx 1 sec duration and at the same time it would disable the other peak detector for 1 sec time duration. after the time period, again both the peak detectors would be enabled. i have been able to detect both peaks but still not able to control the detectors block the way mentioned before.
    the code and the data are attached.
    Attachments:
    eog peak detection.vi ‏192 KB

    I'm not suggesting any of this as a model, and your needs are different than mine.
    1) Go to Preferences -> Audio.  Under "Default Audio Tracks", Set "Mono Media: Mono".  Set "Stereo Media: Mono"  (Choices from the pull-down for both are Use File, Mono, Stereo, 5.1, Adaptive)
    You can change these, but I don't. I am using both mono and stereo tracks. I set up a custom sequence with the particular combination of stereo and mono tracks I want.
    2) Set audio for clips by selecting all clips and going to Modify Clip -> Audio Channels Tab.  Under "Number of Audio Tracks" there should be a "1".  Under Channel Format it should read "Stereo".
    I am not sending the audio to anyone else to edit further. I am doing a final stereo mix. If camera one is set up to record 2 mikes as a stereo track, then I leave that unchanged and put it onto a stereo track. If camera two is set up to record one mike onto channel 1 as ambient sound and channel 2 is a mono feed from a sound board, then I modify those clips as Preset Mono, 2 audio tracks, Channel format Mono, and that puts the left source channel (or whichever I choose) onto Audio track 1, channel 1 (of one), and right source channel onto audio track 2, channel 1.
    4) Delete all the existing audio tracks in the sequence and replace them all with mono tracks, so all tracks in the sequence are mono.
    I modify the tracks while creating the sequence, and ultimately use a custom sequence.
    Under my Effects Controls panel there is only Channel Volume, and nowhere to adjust the pan.
    I'm using the mixer, not the effects control panel.

  • One pricing condition for BOM and other for individual component

    Hello SAP gurus,
    We have two pricing condition types created and assigned in the pricing procedure which has been created with reference to PR00 and condition records are maintained for both the condition types.
    But, we want only one pricing condition type to be triggered in the sales order depending on the usage of material in the sales order. As we are selling the same material individually and as well as a component in a bundle ( BOM).
    i.e, when one pricing condition for BOM component and other for individual component
    What are the configuration steps to be taken care to get this scenario?
    Thanks in advance.
    Regards,
    KB
    Edited by: K.byla on Jan 21, 2010 1:20 PM

    Hi Sagar,
    Thanks for your response.
    Yes, we are maintaining only one material. The same material is used to sell individually and also in a BOM.
    As i have mentioned earlier, whenever the material is sold individually it should pick condition type say 'YR00' and when the same material is sold as a bundle ( BOM) , it should pick condition type " YR01" in same the pricing procedure.
    For both the condition types, the condition records are maintained.
    To give the scenario details,
    A material "X" is sold individually as a single component and the same material is also used for selling bundled with other material "Y" and the bundled material as "Z"
    means, Z=X+Y
    Pricing procedure used is say ZRA000 which contains currently the price cond type YR00.
    Now for the bundle (BOM) involvement i want to use the same pricing pricing proc. and add the new cond YR01 in it so that the system will pick the cond.type YR00 when the material is sold individually and YR01 is taken as the price when the material is sold as a bundle against the item X.
    Need to know the steps for this scenario and do i need to maintain a specific requirement ? please suggest.
    BR,
    KB

  • Use one account for apps and other for itunes match

    Hello everybody
    My question today is quite simple. I use one account for apps and tv shows, but inwant to use a different itunes account for purchasing itunes match. How can I use them both on my devices? Will it be asking for my user-pass each time i play a song? What other thing should i consider?
    Thank you in advance

    I would strongly recommend you not do this.  You will regret it.
    I have played with this issue a lot.  You have to remain signed into match in order for it to show up on your phone. If you sign out to purchase an app or redownload one from your appstore id you use then match will be removed from your phone and when you go into your music app the icloud will not be there.  You then have to go sign back out of the store id you used for your app purchase and then sign back into match and everything will have to go though the download to your device process again.  This really is not what you want to do.
    Sign up to match with the apple id that you know you will use the most or has the most purchased items and use that for all purchases, i.e. books, apps, movies, and music.  You don't want to go though the other process.
    Plus apple will start not letting you sign into match because you signed out and back in, in to short a period of time.
    all store purchases on an iphone are linked to the store id.  if you sign out of your match id on the appstore and sign into another account to purchase an app then itunes match will sign out in the music app.  You can't have two store id's signed into your iphone at the same time.  They are all linked together.

  • "securely" use one ethernet interface for WAN and other for the LAN

    I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
    Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
    I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
    Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
    I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
    I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
    I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
    I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
    It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
    (Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
    Thank you in advance,
    Ion Webster

    First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
    Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
    I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
    As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
    So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
    VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
    (s)FTP
    Calendar publishing
    mail(at a later time)
    Thank you for your help thus far.
    Ion Webster

  • Dual monitor use audio output for movie and other for MBP

    is it possible im watching a movie on one and wated to answer factime call or watch youtube on my mbp and just screamed out my tv speakers.....i want fual monitoring but separate audio any help?

    Other alternatives include
    I know on mackbooks I've seen firewire used as an input for a Weiss Dac if you're into two channel audio.  Do any reiceivers take firewire as an input for hometheater?  Has anyone tested Firewire outputs on their W series?  I'm told that firewire is sometimes preferable to USB, I'm not sure why this would be, can USB support passthrough of DTS encoded signals?
    In the case that firewire works and you Do not have a firewire source, maybe something like this would be of value  It converts firewire to digital coaxial s/pdif and allows passthrough of DTS and AC3.
    http://www.m-audio.com/images/global/manuals/FireWire-Audiophile_Manual.pdf
    As I'm into audio the critical thing here (and what you're paying for when you purchase blue-ray, is maintaining the digital information from the disk in an unconverted form.  You want a direct bit pass through, and you want as little jitter introduced to the signal as possible.  You most certainly don't want the sound card getting in the way, Digtital to Analog converting and then reverse packaging it up and putting it out over the soundcard digital out.  My problem is I'm not familiar enough with computer audio to know how exactly the sounds is transmitted from your blue ray drive to the digital interface you've chosen.
    Anyone know why USB digital out would not be a prefered method?
    Moderator note; comment removed which contravened forum rules

  • Need 2 options; one for fullscreen and other for window

    I have an application that needs to run fullscreen if the
    monitor's resolution is set to 1024x768, and in a standard window
    if the resolution is any larger. For the fullscreen mode, it needs
    to take up the entire 1024x768 space - so the taskbar needs to go.
    The problem I'm having is that when I enter fullscreen mode, the
    movie won't take over the entire screen, it leaves a space at the
    bottom eventhough I've hidden the taskbar.
    What I need is for it to function just as it would if I
    selected "fullscreen" from the publisher settings. Any idea? Here's
    the code I'm using now:
    if baScreenInfo("width") = 1024 then
    displayType = "fullscreen"
    _movie.displayTemplate.titlebarOptions.visible = false
    _movie.displayTemplate.resizable = false
    _movie.stage.drawRect = rect(0, 0, 1024, 768)
    _movie.stage.rect = rect(0, 0, 1024, 768)
    baHideTaskBar(true)
    else
    displayType = "window"
    _movie.displayTemplate.titlebarOptions.visible = true
    _movie.displayTemplate.resizable = true
    end if

    I was actually able to solve this problem with a free xtra
    called fullscreen.x32. Now what I do is through the publisher
    settings I set the movie as a standard window, and then only if the
    screen is set to 1024x768, I reset it to fullscreen. So the code is
    simply this (using buddyAPI to get the display indo):
    if baScreenInfo("width") = 1024 then
    fs = new(xtra "fullscreen")
    setScreenMode(fs, 1024, 768,16,0, 0)
    end if
    It displays over the taskbar just like the fullscreen setting
    does in the publish settings. Works great.

  • Graphics For GPU and GPI for Da Vinci

    I want to run Da Vinci Resolve 9 in MAC PRO 6 core. I need a Graphic card for GPI and other for GPU. I think i can use 4 slots bcoz i cant afford a PCI expander. So 1 for capture, 1 for raid, 1 for GPI and 1 for GPU.
    Does ATI Radeon 5770 or 5870 and Quadro 4000 work well together or which 2 graphics work for my purpose. Plz suggest

    I confess, I am not sure but...
    GTX 670 4GB for graphics processing and no need for 2nd GPU with 10.8.2+
    You do realize there are two 6-pin power ports for GPUs but ways to finangle more power w/ 2nd small PSU.
    Avoid Apple RAID but if you want hardware RAID6 for instance, fine.
    A single slot gpu not double wide means also having to look outside for say GTX 650 or 5xx maybe?

  • The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.

    The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.  I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone.  I tried turning contacts for both off and on and rebooting, but it didn't help.  Any ideas?

    Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting.  You would need to check with your employer's IT department to confirm this.  You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.

  • I have multiple devices (imacs, lap tops and ipads) all connected to a NAS server.  Can I create a user for myself and one for my wife, and each have our own apple ID, and Itunes accounts, but all share the same media on NAS drives?

    I have multiple devices (iMacs, Lap tops, Ipads) all connected to a Nas Drive.  Can I create a user for myself and one for my wife and we each have our own apple ID's, Itunes etc, but share the same data on the hard drives?  So when she logs in, and sync's her ipads, they will sync with her stuff and when I do the same under my user account, on the same device, my ipads will sync with my stuff?

    You can share the same Apple ID for purchasng form the iTunes and app stores without any problems, but you should all used separate iCloud accounts with separate Apple IDs.  (You are not required to use the same ID for iCloud and other services as you do for the iTunes store.)  This will prevent you from ending up with merged data.  You should also use separate Apple IDs for iMessage and FaceTime or you will end up getting each other's text messages and FaceTime calls.
    This article may be of interest: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/, as well as this video: http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.

  • How to define a schema for fixed length consisting of multiple records of different types having header detail and footer at positions 22 and 23 namely having 10 for header 20 for detail and 30 for footer

    how to define a schema for fixed length consisting of multiple records of different types having header detail and footer at positions 22 and 23 namely having 10 for header ,20 for detail and 30 for footer.
    here is the sample file
    DDWTYBILL13092502572 1000000112\\NHLSFS\ORACLE\ORACLE\BILLING\VERIFY\            2013/09/25 01:19:08 BILLEND     
    DDWTYBILL13092502572 2000000212PRIVATE             PRIVATE             STY5572142     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731543                                           Suspect TB ?CA, (L) EMPIEEM                                           Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000312PRIVATE             PRIVATE             STY5572149     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731548                                           Empyema BPF                                                           Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.9                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000412PRIVATE             PRIVATE             STY5572351     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731584                                           Suspect TB ?EMPIEEM, ?CA                                              Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000512PRIVATE             PRIVATE             STY5572352     010700         INV                              12STYD000789                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNM    DIMPHANA,CN,CELESTE NERINA                                                                                                        09-JAN-1964                              TYG       A2        DR DU PREEZ                                                                                         5602181             63301345       TB731585                                           Suspect TB ?EMPIEEM, ?CA                                              Ward A2                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                          05-AUG-201305-AUG-201324-SEP-2013FEND    113.60
    DDWTYBILL13092502572 2000000612MAJOR               MAJOR               STY5577530     010700         INV                              12ZTYG000009                  02-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNS    ZOZI,S,SIYAMBONGA                                                                                                                 27-MAR-2010                              TYG       D3        DR MAHOMED                                                                                          5602181             113799662      TB731663                                           Lymphadenitis                                                         Ward D3                                           TYGERBERG HOSPITAL                                                                                  I88.9                                                       Z03.9                                                       H1 07-AUG-201307-AUG-201324-SEP-2013MEND     58.52
    DDWTYBILL13092502572 2000000712MAJOR               MAJOR               STY5577537     010700         INV                              12ZTYG000009                  06-AUG-20130000010472      STY       STY       1100611006MGIT                91  NNS    DLAMINI,N,NTLANTLA                                                                                                                09-OCT-1976                              TYG       F1        DR WZESE                                                                                            5602181             135524676      TB731666                                           Suspect TB                                                            Ward F1                                           TYGERBERG HOSPITAL                                                                                  Z03.0                                                       Z03.9                                                       H1 07-AUG-201314-AUG-201324-SEP-2013MEND     58.52
    DDWTYBILL13092502572 30003034120000003032END

    You can create an nXSD using Native Format Builder and use lookAhead attribute to read values at specific position and use that as the choice. You can find an example here
    http://docs.oracle.com/cd/E11036_01/integrate.1013/b28994/nfb.htm#BGBBAJFD

  • Indesign and other for £19.95 each.... Legit?!?!?!?!

    sorry to bother this forum, but just found a website (
    URL deleted by host) on which you can buy Indesign and other for £19.95 a piece.
    sounds like a fraud and just wanted to check with others whether to trust this kind of thing and how to find out whether it is legitimate or not. Is a bloody good deal!!
    Cheers!
    Rob

    Here's my two cents worth of advice. Pay particular attention to the
    last paragraph.
    http://www.theindesignguy.com/puchase-advice.html
    Bob

  • Documentation for wwv_flow_utilities and other wwv packages

    Hi,
    Where can I find documentation for wwv_flow_utilities and other wwv packages? It seems we have to use many of the variables/procedures/functions provided in certain situations.
    Thanks,
    Paresh

    Hello Paresh,
    The documentation is here. Click on the 'Application Express API Reference' for detailed info.
    Greetings,
    Roel
    http://roelhartman.blogspot.com/
    http://www.bloggingaboutoracle.org/
    http://www.logica.com/

  • How can I install Dutch language for SMS and other...

    Hello there,
    I got a Nokia 6220c bought in the UK, and now need Dutch language for SMS and other common tasks... how can I get it?
    Many thanks,
    Mariano

    You need to take the phone to a nokia care point and ask them to install it for you.
    Language packs are not available for self install.
    http://europe.nokia.com/support/repair-and-recycle/repair/care-points
    Any methods that you may read about elsewhere will void the warranty and cannot be discussed here.

Maybe you are looking for