Multiple ios5 problems
I am having several problems with ios5 and wanted to see if anyone can help. Toughts?
1) the notifications pane does not appear to be working as configured and now general notifications from non-apple apps are not working. Notifications for phone, mail, calendar and messenger work. Notifications for twitter, Facebook, sportacular, etc., etc. do not, even though I have them configured in notifications.
2) I subscribed to a newstand magazine (guitar world) on my iPhone... It showed up as "purchased" on the AppStore on my iPad, but the actual subscription is not available on the iPad. I cannot download the issue like I can on my iPhone. Also, I can't click on the "purchase subscriptions" option in newstand to see if it's there. Can I see my magazine subscription on multiple iOS devices?
3) the Airport utility requires my admin password for my airport. I can access it on my Mac (airport utlility) but it will not accept my password on my iPad or iPhone.
Any help is much appreciated... This is really a bumpy transition.
Update - resetting and starting over seems to have worked for now - thanks Spiff.
On the Newstand issue, resetting my ipad and iphone multiple times and trying the "restore purchases" function in the magazine itself finally allowed a download in the ipad, however even though it allowed it, it still gave me the "no purchases made" error - very strange but I have the issue of the magazine on both devices.
Absolutely no luck with Notifications - I woke up this morning and none of my twitter or facebook or news notifications are there, again, just the apple ones (mail, calendar, messenger).
Similar Messages
-
Has anyone got an answer to fix ios5 problem, no sim card inserted...
Has anyone got an answer to fix ios5 problem, no sim card inserted...
I bought a new sim card today at the t-mobile shop and they activated the card just by putting credit on, i got home put the sim in the iphone and still got the same message. I have restored and shut down I dont know how many times and updated itunes, I am wishing i had said no to updating the phone as i have no iphone to use and apple say i should go to an apple shop.
-
Multiple Inheritance problem persists in Interfaces
Hi,
I tentatively made a program and found that multiple inheritance problem of C++ persists even with interfaces. Although this is definetely a special case but I want to know what is this problem known as( i know that this is perhaps known as diamond problem in C++). And is there a way out of this thing.
interface one
int i=10;
interface two
int i=20;
interface z extends one,two
public class xyz implements z
public static void main(String [] a)
System.out.println(i);
}O/P
D:\Education\Java\JavaStudyRoom\Applets>javac xyz.java
xyz.java:16: reference to i is ambiguous, both variable i in one and variable i
in two match
System.out.println(i);
*^*
*1 error*
Thanks for replyingsuvojit168 wrote:
I tentatively made a program and found that multiple inheritance problem of C++ persists even with interfaces. Although this is definetely a special case but I want to know what is this problem known as( i know that this is perhaps known as diamond problem in C++). And is there a way out of this thing. This is not the so called diamond inheritance problem. What you have here is an ordinary name clash. And as has been noted you can resolve it by qualifying which constant you're referring to, like
System.out.println(one.i);
For the diamond inheritance problem to apply both the one and the two interfaces would need to inherit a common ancestor (that's how the diamond is formed). Furthermore the common anscestor would need to carry implementation which would then be inherited two ways, once via one and once via two. This is the diamond inheritance problem Java is avoiding by allowing single inheritance of implementation only.
P.S. My previous post was posted my mistake. -
SP10 - multiple approver problem with CUP
We have SP10 (patch 1) in our development system and cannot move forward to production because of a real show stopper. I have currently reported this to SAP thru an OSS message (and it is in development) but would like to know if anyone else is having this issue with SP10. (this happened even before applying patch 1)
We have multiple approvers when creating NEW users or CHANGING users in CUP. We have it configured to allow just one of the approvers to approve before going on to the next stage. Since we put in SP10, CUP is requiring ALL approvers to approve the request before going on to the next stage. We get the following message when one of the approvers approve the request: Request no: 5020. is approved, pending for other Approvers.
I've seen this reported for UAR and SOD but not for CUP. In fact, there is a fix for UAR in Patch 1 of SP10. I applied this patch but it hasn't fixed the CUP issue. I also don't have the issue when rejecting a CUP request, or when approving it through the configuration --> Request --> Administration screen (what I consider the Back-door since only security administrators get the configuration area).
Thanks for your input.
PeggyChristian,
I totally agree with you.
The good news is.... We installed SP11.1 and the multiple approver problem is fixed.
We have decided to leave our production system at SP8 until this system settles down a bit. Of course, this means we can't use many of the new fixes and features (such as UAR). We use our sandbox system to apply new support packs and do very rigorous testing. And our DEV system is at SP8 too.
Good Luck.
Peggy -
L430 multiple driver problems (ultranav and others)
Hello,
I have multiple driver problems with my newly purchased L430.
1) After hibernate the UltraNav driver randomly stops working. This means that the settings are grayed out and my old settings aren't applied. Sometimes the mouse pad and track ball also stop working after hibernate.
2) The hardware mute button and hibernate don't like each other as well. After resuming from hibernate with the mute button on the sound doesn't work anymore. Rebooting only helps if you have disabled the mute before rebooting.
3) The intel usb 3.0 driver can't be installed unless you want a lot of bluescreens.
I do have the newest drivers and BIOS (2.54).It's ok my friend, I just hope I will be able to help.
Now to the problem. The thing that worries me the most and the reason I asked you to contact a Lenovo Repair Center, is the blue screens with the Intel Usb 3.0 installation. If the driver is correct this should not happen and most of the times it signifies a pure hardware problem, not a software one. Really, it just should not happen, period!
So please, before anything else, download and boot with a Linux Live cd, any distro you like (e.g. Linux Mint, Fedora, etc). Better choose a 64bit version. It's one way of determining if you're facing a hardware problem with the usb 3.0 ports.
The information you give is very useful and more or less complete, but I would like to also know the model of your SSDs, both the 2.5'' and msata.
Meanwhile, you can check either with the Linux Live cd or with Memtest86+ your ram. This does not seem to be a memory problem but it would be nice if we could exclude it from the suspects list. Many - if not most - of these problems are multifactorial and we cannot leave anything to chance..
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
HAS THE IOS5 PROBLEMS BEEN SOLVED
ios5 problems been solved yet?
No, problems still exist. I have an iPhone 4 and it wont allow some app's to update and now I can't use them. There are also problems with downloading from the cloud as some items will come up with an error code. Also why did Apple force your own equipment to upload everthing to the cloud? I now have to reload around 16GB of music back to the phone and I said previously the phone let me reload all my own songs!!
Those guys who said there no problems are lucky but also out of touch, have they not heard of all the press news about this? I loved my phone but now its becoming frustating, needs sorting soon. -
Outlook Sync - Multiple Calendar Problem
(I am not sure whether this belongs in this Forum or would be more appropriately directed to my Device (Curve 8900) forum or Desktop Software. Please advise or re-direct if that is the case.)
I am having a sync issue with Outlook, and it revolves around the issue of having multiple calendars on the Device, each of which is associated with an e-mail address. I understand this has been a relatively common question; however, although I admittedly may be looking in the wrong place, I have yet to come across a comprehensive solution.
I understand how to switch the "default" e-mail associated with scheduling items on the calendar, and I believe I'm correct in thinking that this is what syncs with Outlook. I've noticed that when I try switching the default, Outlook wants to delete all other appointments which are NOT associated with that device calendar.
So I guess my specific questions are:
1) Is there a way to have Outlook sync with ALL calendars on the device, i.e. not just the default? It's easy enough to make all appointments from here on out with a single account & have that be the one that syncs; however, it doesn't seem possible to do that without having Outlook want to delete all other appointments.
2) Is there a way to change the associated email/calendar for events on the Device? When I open an event, I can see which email/calendar it is but I don't know how to *change* it -- I only seem to have a choice when scheduling new events.
If either of these was an option, I think that would solve my problem -- I could either go through the device & convert everything to the default email/calendar & everything would be there upon sync, OR Outlook would just pick up everything from all calendars when I sync.
I don't understand why it's so complicated to have everything in one place!
Thanks in advance to those willing to share their wisdom & advice in this matter.
mbwI was going to post that article but you beat me to it.
I believe this is the only way to accomplish this on a BlackBerry
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution. -
MULTIPLE ITEM PROBLEM IN VL31N BDC
hI FRIENDS ,
I AM POSTING A BDC OF TRANSACTION VL31N ,ie FOR SCHEDULE AGREEMENT INBOUND DELIVERY.I CREATE A FUNCTIONAL MODULE OF THE SAME AND CALL IT FROM AN ASP PAGE,IN THAT THERE IS PO NUMBER 5500000986 WHICH HAS TWO ITEMES 62 AND 95 RESPECTIVLY OF SAME MATARIAL NUMBER R010230123041002 AND DIE NUMBER 2304P,NOW THE PROBLEM IS THIS BDC IS WORKING WHEN THERE IS ONLY ONE ITEM BUT GIVES AN ERROR "CANT CREAT INBOUND DELIVERY FOR PO NO ...' WNEN IT HAS MULTIPLE ITEM.WHAT SHOULD I DO ? I ALSO USED LOOP BUT IT ALSO DOSENT WORK AS IT WILL ADD ALL OPEN QTY OF PO 986 AND UPDATE AGAINST ITEM NO 95.
CODE IS AS FOLLOWS:.........
FUNCTION y_synie_bdcinbdly.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(EXTNID) LIKE MAKT-MAKTG
*" VALUE(VENDORNO) LIKE LFA1-LIFNR
*" VALUE(PONUMBER) LIKE EKKO-EBELN
*" VALUE(ITEMNUMBER) LIKE LIPS-VGPOS
*" VALUE(MATERIAL) LIKE MAKT-MAKTG
*" VALUE(DLYQTY) LIKE LIPS-LFIMG
*" VALUE(BTCHNO) LIKE LIPS-CHARG
*" VALUE(POSLR) LIKE EKES-EBELP OPTIONAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" VALUE(INDELYNO) LIKE SY-MSGV2
*" VALUE(MSG1) LIKE SY-MSGV1
*" VALUE(MSG2) LIKE SY-MSGV2
*" VALUE(MSG3) LIKE SY-MSGV3
*" VALUE(MSG4) LIKE SY-MSGV4
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL
*" ERRTAB STRUCTURE YSYNERRMSGS
*" INDLYTAB STRUCTURE YSYN_QTYTAB
Updated by ANAND SYNISE 19.1.2007
DATA: BEGIN OF bdctab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdctab.
DATA: datenow(10) TYPE c,
fldvar(30) TYPE c,
fldno TYPE i,
flditoc(6) TYPE c,
qty(13) TYPE c.
DATA maxposnr LIKE lips-posnr.
DATA testposnr TYPE posnr.
DATA itemnoint TYPE i.
CONCATENATE sy-datum6(2) '.' sy-datum4(2) '.' sy-datum+0(4) INTO datenow.
CLEAR bdctab.
REFRESH bdctab.
PERFORM open_group USING group user keep holddate ctu.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '4007'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'RV50A-VERUR_LA'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '/00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-LIFNR'.
bdctab-fval = vendorno.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LV50C-BSTNR'.
bdctab-fval = ponumber.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-VERUR_LA'.
bdctab-fval = extnid.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=MKAL_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIKP-BLDAT'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=POPO_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-POSNR(01)'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '0111'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'RV50A-PO_MATNR'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = 'WEIT'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-PO_MATNR'.
bdctab-fval = material.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=POLO_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-POSNR(01)'.
APPEND bdctab.
*ADDED BY ANAND ON 22-01-2007
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = ITEMNUMBER . "ITEMNUMBER = LIPS-VGPOS
APPEND bdctab.
************ENDED***********************
ADDED BY MILIND 19.01.2007
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = poslr .
APPEND bdctab.
* ENDED * *
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LIPS_SELKZ(01)'.
bdctab-fval = ''.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '/00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-CHARG(01)'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
QTY = INDLYTAB-DLYQTY.
qty = dlyqty.
bdctab-fnam = 'LIPSD-G_LFIMG(01)'.
bdctab-fval = QTY.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIPS-CHARG(01)'.
* BDCTAB-FVAL = INDLYTAB-BTCHNO.
bdctab-fval = btchno.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=SICH_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-MATNR(02)'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CALL TRANSACTION 'VL31N' USING bdctab MODE 'N' MESSAGES INTO messtab.
subrc = sy-subrc.
PERFORM close_group USING ctu.
CLEAR bdctab.
REFRESH bdctab.
IF sy-subrc EQ 0.
indelyno = sy-msgv2.
ENDIF.
LOOP AT messtab.
MOVE: messtab-msgid TO errtab-msgid,
messtab-msgnr TO errtab-msgnr,
messtab-msgv1 TO errtab-msg1,
messtab-msgv2 TO errtab-msg2,
messtab-msgv3 TO errtab-msg3,
messtab-msgv4 TO errtab-msg4.
APPEND ERRtab.
ENDLOOP.
LOOP AT errtab.
SELECT SINGLE text FROM t100
INTO errtab-errmsg
WHERE msgnr EQ errtab-msgnr AND arbgb EQ errtab-msgid
AND sprsl EQ sy-langu.
MODIFY errtab.
ENDLOOP.
ENDFUNCTION.Hi,
Check this code:
REPORT Z_CUSTOMER_UPLOAD .
D A T A D E C L A R A T I O N S *
DATA:BEGIN OF IT_CUSTOMER OCCURS 0,
KUNNR LIKE MV10A-KUNNR,
VKORG LIKE MV10A-VKORG,
VTWEG LIKE MV10A-VTWEG,
MATNR LIKE MV10A-MATNR,
KDMAT LIKE MV10A-KDMAT,
MEGRU LIKE MV10A-MEGRU,
SELKZ TYPE C value 'X',
LPRIO LIKE MV10A-LPRIO,
ANTLF LIKE MV10A-ANTLF,
END OF IT_CUSTOMER.
DATA:BEGIN OF IT_success OCCURS 0,
KUNNR LIKE MV10A-KUNNR,
VKORG LIKE MV10A-VKORG,
VTWEG LIKE MV10A-VTWEG,
MATNR LIKE MV10A-MATNR,
KDMAT LIKE MV10A-KDMAT,
MEGRU LIKE MV10A-MEGRU,
SELKZ TYPE C value 'X',
LPRIO LIKE MV10A-LPRIO,
ANTLF LIKE MV10A-ANTLF,
END OF IT_success.
DATA:BEGIN OF IT_error OCCURS 0,
KUNNR LIKE MV10A-KUNNR,
VKORG LIKE MV10A-VKORG,
VTWEG LIKE MV10A-VTWEG,
MATNR LIKE MV10A-MATNR,
KDMAT LIKE MV10A-KDMAT,
MEGRU LIKE MV10A-MEGRU,
SELKZ TYPE C value 'X',
LPRIO LIKE MV10A-LPRIO,
ANTLF LIKE MV10A-ANTLF,
END OF IT_error.
DATA: L_INDEX TYPE SY-TABIX.
DATA:IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
ERROR MESSAGE TABLE
DATA:IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : C_S TYPE C VALUE 'S',
C_E TYPE C VALUE 'E'.
*DATA: IT_SUCCESS LIKE IT_CUSTOMER OCCURS 0,
IT_ERROR LIKE IT_CUSTOMER OCCURS 0.
DATA : V_RECTOT TYPE I,
V_RECERR TYPE I,
V_RECSUC TYPE I.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_FILE LIKE RLGRAP-FILENAME .
SELECTION-SCREEN : END OF BLOCK B1.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
to get F4 help for p_file
PERFORM F4_FILENAME USING P_FILE.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Uploading data from flat file into it_tab
PERFORM BDC_UPLOAD USING P_FILE.
PERFORM PROCESS_DATA.
PERFORM POPULATE_BDC.
E N D O F S E L E C T I O N *
*END-OF-SELECTION.
PERFORM DISPLAY_REPORT.
*& Form F4_FILENAME
text
-->P_P_FILE text
FORM F4_FILENAME USING P_P_FILE.
DATA:L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = L_FILE .
P_P_FILE = L_FILE.
ENDFORM. " F4_FILENAME
*& Form BDC_UPLOAD
text
-->P_P_FILE text
FORM BDC_UPLOAD USING P_P_FILE.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_P_FILE
I_BEGIN_COL = 1
I_BEGIN_ROW = 1
I_END_COL = 8
I_END_ROW = 1000
TABLES
INTERN = IT_DATA
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_UPLOAD
*& Form PROCESS_DATA
text
--> p1 text
<-- p2 text
FORM PROCESS_DATA.
SORT IT_DATA BY ROW COL.
LOOP AT IT_DATA.
CASE IT_DATA-COL.
WHEN 1.
IT_CUSTOMER-KUNNR = IT_DATA-VALUE.
WHEN 2.
IT_CUSTOMER-VKORG = IT_DATA-VALUE.
WHEN 3.
IT_CUSTOMER-VTWEG = IT_DATA-VALUE.
WHEN 4.
IT_CUSTOMER-MATNR = IT_DATA-VALUE.
WHEN 5.
IT_CUSTOMER-KDMAT = IT_DATA-VALUE.
WHEN 6.
IT_CUSTOMER-MEGRU = IT_DATA-VALUE.
WHEN 7.
IT_CUSTOMER-LPRIO = IT_DATA-VALUE.
WHEN 8.
IT_CUSTOMER-ANTLF = IT_DATA-VALUE.
APPEND IT_CUSTOMER.
ENDCASE.
ENDLOOP.
ENDFORM. " PROCESS_DATA
*& Form POPULATE_BDC
text
--> p1 text
<-- p2 text
FORM POPULATE_BDC.
DATA:L_COUNTER TYPE N,
L_STRING TYPE STRING.
LOOP AT IT_CUSTOMER.
AT NEW KUNNR.
CLEAR L_COUNTER.
L_INDEX = SY-TABIX.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_dynpro using 'SAPMV10A' '0100'.
perform bdc_field using 'MV10A-KUNNR'
IT_CUSTOMER-KUNNR.
perform bdc_field using 'MV10A-VKORG'
IT_CUSTOMER-VKORG.
perform bdc_field using 'MV10A-VTWEG'
IT_CUSTOMER-VTWEG.
perform bdc_field using 'BDC_OKCODE'
'/00'.
ENDAT.
L_COUNTER = L_COUNTER + 1.
CLEAR L_STRING.
perform bdc_dynpro using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-MATNR(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-MATNR.
CONCATENATE 'MV10A-KDMAT(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-KDMAT.
CONCATENATE 'MV10A-MEGRU(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-MEGRU.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*-- For Page down in Call Transaction Mode
IF L_COUNTER = 14.
CLEAR L_COUNTER.
PERFORM BDC_DYNPRO USING 'SAPMV45A' '4001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=P+'.
ENDIF.
perform bdc_dynpro using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-SELKZ(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-SELKZ.
perform bdc_field using 'BDC_OKCODE'
'=SELE'.
perform bdc_dynpro using 'SAPMV10A' '0300'.
perform bdc_field using 'MV10A-KDMAT'
IT_CUSTOMER-KDMAT.
perform bdc_field using 'MV10A-LPRIO'
IT_CUSTOMER-LPRIO.
perform bdc_field using 'MV10A-ANTLF'
IT_CUSTOMER-ANTLF.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/EBACK'.
at end of kunnr.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'VD51' USING IT_BDC MODE 'A' UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
CLEAR IT_BDC.
REFRESH IT_BDC.
ENDAT.
IF NOT IT_MESSAGES[] IS INITIAL.
PERFORM FORMAT_MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM. " POPULATE_BDC
*& Form bdc_dynpro
text
-->P_0273 text
-->P_0274 text
FORM bdc_dynpro USING VALUE(P_0273)
VALUE(P_0274).
IT_BDC-PROGRAM = P_0273.
IT_BDC-DYNPRO = P_0274.
IT_BDC-DYNBEGIN = 'X'.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM. " bdc_dynpro
*& Form bdc_field
text
-->P_0278 text
-->P_RECORD_KUNNR_001 text
FORM bdc_field USING VALUE(P_0278)
VALUE(P_0279).
IT_BDC-FNAM = P_0278.
IT_BDC-FVAL = P_0279.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM. " bdc_field
*& Form FORMAT_MESSAGE
text
--> p1 text
<-- p2 text
FORM FORMAT_MESSAGE.
DATA: L_MSG(100).
LOOP AT IT_MESSAGES.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = SY-LANGU
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write:/ l_msg.
ENDLOOP.
ENDFORM. " FORMAT_MESSAGE
reward if helpful,
keerthi -
there is an example in oracle warehouse builder user's guide how to load xml file into multiple tables (1:N relationship).
Let's have an xml file:
<orders>
<order>
<id>1</id>
<items>
<item>
<product>a</product>
</item>
</items>
</order>
</orders>
but what if one day you get an xml file where an order has no items:
<orders>
<order>
<id>10</id>
</order>
</orders>
I get an error message: ORA-20011: Error occurred while loading source XML document into the target database object XXX . Base exception: No rows to modify -- the row enclosing tag missing. Specify the correct row enclosing tag.
What I want is to load in order table one row, and no rows in items table.
The xsl for this small example that makes a problem looks like (the rest is like in oracle warehouse builder user's guide example in C appendix):
<?xml version = '1.0' encoding = 'UTF-8'?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<ROWSET>
<xsl:for-each select="orders/order/items/item">
<ROW>
<ORDER_ID>
<xsl:value-of select="../../id"/>
</ORDER_ID>
<PRODUCT>
<xsl:value-of select="product"/>
</PRODUCT>
</ROW>
</xsl:for-each>
</ROWSET>
</xsl:template>
</xsl:stylesheet>Sounds like you've missed some tag from the files.
For XML processing I would look at leveraging XDB, see the post here;
http://blogs.oracle.com/warehousebuilder/2007/09/leveraging_xdb.html
Cheers
David -
Details? I posted a question about one problem (for which no answers have been offered, but that's okay) and somehow, I've become part of multiple threads about various firefox problems. I have no interest in any of these questions/problems.
How do I get out of these threads? I get about 15-20 emails a day! Firefox is by far the worst community I've even been dragged into....Sorry you are having problems.
Have a look at your settings in the dropdown from the username or https://support.mozilla.org/en-US/users/settings
Not too sure what you could subscribe to accidentally that causes that behaviour though.
It would be interesting to know what option caused all the email. If something has gone wrong and you are getting e-mails that you should not be getting we can refer this to the admins to look into. The Firefox sumo community certainly does not intentionally spam, and if you are having a problem lets find out more, because others may have a problem and not have reported it. -
Data template multiple selection problem
Hi all,
I have a problem with the Multiple Selection on the BI Publisher using data templates. One of my parameters is called p_application, this parameter is a integer/number and its values come from a list of values.
I'm getting the error "....invalid number". I think the data template is not understanding that this parameter have multiple selection.
Can you help me?
here is my data template
<dataTemplate name="user_reg" dataSourceRef="Thomson_Live_ EDC_Environment">
<properties>
<property name="include_parameters" value="false"/>
<property name="include_null_Element" value="false"/>
<property name="include_rowsettag" value="false"/>
<property name="scalable_mode" value="on"/>
<property name="db_fetch_size" value="20"/>
<property name="scalable_mode" value="on"/>
</properties>
<parameters>
<parameter name="p_customer" dataType="string" include_in_output="false"/>
<parameter name="p_application" dataType="integer" include_in_output="false"/>
<parameter name="p_start_date" dataType="date" include_in_output="false"/>
<parameter name="p_final_date" dataType="date" include_in_output="false"/>
<parameter name="p_staff_account" dataType="string" include_in_output="false"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
select COUNT(DISTINCT TRUNC(a.TIMESTAMP)) days_logged
,COUNT(a.USER_ID) logins
,max(a.TIMESTAMP) last_access
,a.application_id application_id
,a.user_id user_id
from user_history_log a,
idweb_user b,
idweb_customer c
where to_date(to_char(a.timestamp,'dd-mm-rrrr'),'dd-mm-rrrr') between to_date(:p_start_date,'dd-mm-rrrr') and to_date(:p_final_date,'dd-mm-rrrr')
and a.user_id = b.user_id
and b.customer_key = c.customer_key
and c.staff_account = :p_staff_account
and ('0' in (:p_customer) or b.customer_key in (:p_customer))
and (0 in (:p_application) or a.application_id in (:p_application))
group by a.application_id, a.user_id ]]>
</sqlStatement>
<sqlStatement name="Q2">
<![CDATA[
SELECT IDCU.CUSTOMER_NAME "Customer name"
,PCAP.APPLICATION_NAME "Application name"
,IDUS.FIRST_NAME "First name"
,IDUS.LAST_NAME "Last name"
,IDUS.USER_NAME "Username"
,IDUS.EMAIL_ADDRESS "Email address"
,IDUS.ROLE "Job Role"
,IDUS.AREA "Job Area"
,IDUS.DEPARTMENT "Specific Job Area"
,IDUS.CITY "City"
,IDUS.US_STATE "State"
,IDUS.COUNTRY "Country"
,SALE.TERRITORY_NAME "Territory/GAM"
,BUUN.BUSINESS_UNIT_NAME "SBU"
,to_char(IDUS.REGISTRATION_DATE,'dd-mm-yyyy') "Registration date"
,to_char(PCCA.EXPIRY_DATE,'dd-mm-yyyy') "Expiry date"
,DECODE(PCUA.DISABLED,'Y','Disabled','Enabled') "Status"
,pcua.application_id application_id
,pcua.user_id user_id
FROM PC_USER_APPLICATION PCUA
,PC_CUSTOMER_APPLICATION PCCA
,IDWEB_USER IDUS
,IDWEB_CUSTOMER IDCU
,sales_territory SALE
,business_unit BUUN
,PC_APPLICATION PCAP
WHERE BUUN.BUSINESS_UNIT_ID(+) = IDCU.SBU_ID
AND SALE.TERRITORY_ID(+) = IDCU.TERRITORY_ID
AND IDCU.CUSTOMER_KEY = IDUS.CUSTOMER_KEY
AND IDUS.USER_ID = PCUA.USER_ID
AND PCCA.CUSTOMER_KEY = IDCU.CUSTOMER_KEY
AND PCCA.APPLICATION_ID = PCAP.APPLICATION_ID
AND PCAP.APPLICATION_ID = PCUA.APPLICATION_ID
AND NVL(IDUS.DISABLED,'N') = 'N'
AND IDCU.STAFF_ACCOUNT = :p_staff_account
AND ('0' in (:p_customer) or IDCU.CUSTOMER_KEY in (:p_customer))
AND (0 in (:p_application) or pcap.application_id in (:p_application))
ORDER BY IDCU.CUSTOMER_NAME, PCAP.APPLICATION_NAME, IDUS.USER_NAME ]]>
</sqlStatement>
<sqlStatement name="Q3">
<![CDATA[
select COUNT(a.TIMESTAMP) "Number of Turnaways Kickout",
MAX(a.timestamp) "Last Turnaway Kickout",
a.application_id,
a.user_id
from tpharma_user.user_refused a,
idweb_user i
where to_date(to_char(a.timestamp,'dd-mm-rrrr'),'dd-mm-rrrr') between to_date(:p_start_date,'dd-mm-rrrr') and to_date(:p_final_date,'dd-mm-rrrr')
and (0 in (:p_application) or a.application_id in (:p_application))
and a.user_id = i.user_id
and ('0' in (:p_customer) or i.customer_key in (:p_customer))
group by a.application_id, a.user_id ]]>
</sqlStatement>
<link name="ruser3" parentQuery="Q1" parentColumn="user_id" childQuery="Q3" childColumn="user_id(+)" condition="="/>
<link name="rapp3" parentQuery="Q1" parentColumn="application_id" childQuery="Q3" childColumn="application_id(+)" condition="="/>
<link name="ruser1" parentQuery="Q1" parentColumn="user_id" childQuery="Q2" childColumn="user_id" condition="="/>
<link name="rapp1" parentQuery="Q1" parentColumn="application_id" childQuery="Q2" childColumn="application_id" condition="="/>
</dataQuery>
<dataStructure>
<group name="G_totals1" source="Q1">
<element name="days_logged" value="days_logged"/>
<element name="logins" value="logins"/>
<element name="last_access" value="last_access"/>
<element name="application_id" value="application_id"/>
<element name="user_id" value="user_id"/>
</group>
<group name="G_main" source="Q2">
<element name="Customer name" value="Customer name">
<element name="Application name" value="Application name">
<element name="First name" value="First name">
<element name="Last name" value="Last name">
<element name="Username" value="Username">
<element name="Email address" value="Email address">
<element name="Job Role" value="Job Role">
<element name="Job Area" value="Job Area">
<element name="Specific Job Area" value="Specific Job Area">
<element name="City" value="City">
<element name="State" value="State">
<element name="Country" value="Country">
<element name="Territory/GAM" value="Territory/GAM">
<element name="SBU" value="SBU">
<element name="Registration date" value="Registration date">
<element name="Expiry date" value="Expiry date">
<element name="Status" value="Status">
<element name="application_id" value="application_id"/>
<element name="user_id" value="user_id"/>
</group>
<group name="G_main" source="Q3">
<element name="Number of Turnaways Kickout" value="Number of Turnaways Kickout"/>
<element name="Last Turnaway Kickout" value="Last Turnaway Kickout"/>
<element name="application_id" value="application_id"/>
<element name="user_id" value="user_id"/>
</group>
</dataStructure>
</dataTemplate>
on the XDO file, the parameters are:
<parameters>
<parameter id="p_customer" defaultValue="8c3ff6ad5eh5c8" dataType="xsd:string">
<select label="Customer: " valueSet="lv_customer" multiple="true" all="false" allValue="lov"/>
</parameter>
<parameter id="p_application" defaultValue="1" dataType="xsd:integer">
<select label="Application: " valueSet="LV_application" multiple="true" all="false" allValue="lov"/>
</parameter>
<parameter id="p_start_date" defaultValue="{$SYSDATE()$}" dataType="xsd:date">
<date label="Usage occurs on or after (dd-mm-yyyy):" size="11" format="dd-MM-yyyy" minValue="01-06-1950" maxValue="01-06-2100"/>
</parameter>
<parameter id="p_final_date" defaultValue="{$SYSDATE()$}" dataType="xsd:date">
<date label="Usage occurs on or before (dd-mm-yyyy):" size="11" format="dd-MM-yyyy" minValue="01-06-1950" maxValue="01-06-2100"/>
</parameter>
<parameter id="p_staff_account" defaultValue="Y">
<select label="Staff Accout: " valueSet="lv_staff_account" multiple="false" all="false" allValue="null"/>
</parameter>
</parameters>
Thank you,
Marcelo Cure
Oracle Developer
[email protected]
www.ilegra.com
Edited by: user11307652 on 09/03/2010 05:21
Edited by: user11307652 on 09/03/2010 06:15I have a similar problem where i cannot use the parameter with comma separated values in the parameter.
my report definition is as below.
<dataTemplate name="COMLTRDATA" description="Data for the COMLTR letters" dataSourceRef="PRISM">
<parameters>
<parameter name="secondary_sequence" dataType="number" include_in_output="false"/>
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[select PR_LETTER_MASTER.LETTER_ID as LETTER_ID,
to_char(PR_LETTER_MASTER.LETTER_DATE,'FMMonth DD, RRRR') as LETTER_DATE,
PR_LETTER_MASTER.LETTER_NAME as LETTER_NAME,
PR_LETTER_MASTER.ADDRESS_TYPE as ADDRESS_TYPE,
PR_LETTER_MASTER.REVIEWED_FIRM_NUMBER as REVIEWED_FIRM_NUMBER,
PR_LETTER_MASTER.REVIEWED_FIRM_NAME as REVIEWED_FIRM_NAME,
PR_LETTER_MASTER.REVIEWED_FIRM_TYPE as REVIEWED_FIRM_TYPE,
PR_LETTER_MASTER.REVIEWING_FIRM_NUMBER as REVIEWING_FIRM_NUMBER,
PR_LETTER_MASTER.REVIEW_NUMBER as REVIEW_NUMBER,
PR_LETTER_MASTER.SALUTATION as SALUTATION,
PR_LETTER_MASTER.SIGNATURE_EMAIL_ID as SIGNATURE_EMAIL_ID,
PR_LETTER_MASTER.SIGNATURE_TITLE as SIGNATURE_TITLE,
PR_LETTER_MASTER.REVIEW_STATUS as REVIEW_STATUS,
to_char(PR_LETTER_MASTER.REVIEW_COMMENCEMENT_DATE,'FMMonth DD, RRRR') as REVIEW_COMMENCEMENT_DATE,
to_char(PR_LETTER_MASTER.REVIEW_DUE_DATE,'FMMonth DD, RRRR') as REVIEW_DUE_DATE,
PR_LETTER_MASTER.REVIEW_YEAR as REVIEW_YEAR,
PR_LETTER_MASTER.REVIEW_PROGRAM as REVIEW_PROGRAM,
PR_LETTER_MASTER.REVIEW_TYPE as REVIEW_TYPE,
PR_LETTER_MASTER.TEAM_CAPT_FIRM_NAME as TEAM_CAPT_FIRM_NAME,
PR_LETTER_MASTER.PRIOR_REVIEW_NUMBER as PRIOR_REVIEW_NUMBER,
PR_LETTER_MASTER.MNGPTR_MEMBER_NUMBER as MNGPTR_MEMBER_NUMBER,
PR_LETTER_MASTER.FIRST_NAME as FIRST_NAME,
PR_LETTER_MASTER.MIDDLE_INITIAL as MIDDLE_INITIAL,
PR_LETTER_MASTER.LAST_NAME as LAST_NAME,
PR_LETTER_MASTER.ADDRESS_LINE1 as ADDRESS_LINE1,
PR_LETTER_MASTER.ADDRESS_LINE2 as ADDRESS_LINE2,
PR_LETTER_MASTER.ADDRESS_LINE3 as ADDRESS_LINE3,
PR_LETTER_MASTER.CITY as CITY,
PR_LETTER_MASTER.STATE as STATE,
PR_LETTER_MASTER.ZIP as ZIP,
PR_LETTER_MASTER.ZIP_PLUS as ZIP_PLUS,
PR_LETTER_MASTER.DELIVERY_EMAIL_ID as DELIVERY_EMAIL_ID,
PR_LETTER_MASTER.SIGNATURE_TYPE as SIGNATURE_TYPE,
PR_LETTER_MASTER.SIGNATURE_NAME as SIGNATURE_NAME,
PR_LETTER_MASTER.TEAM_CAPT_MEMBER_NUMBER as TEAM_CAPT_MEMBER_NUMBER,
PR_LETTER_MASTER.SIGNATURE_PHONE_NUMBER as SIGNATURE_PHONE_NUMBER,
PR_LETTER_MASTER.LAST_LETTER_SENT_DATE1 as LAST_LETTER_SENT_DATE1,
PR_LETTER_MASTER.LAST_LETTER_SENT_DATE2 as LAST_LETTER_SENT_DATE2,
PR_LETTER_MASTER.LAST_LETTER_SENT_DATE3 as LAST_LETTER_SENT_DATE3,
to_char(PR_LETTER_MASTER.EXIT_CONFERENCE_DATE,'FMMonth DD, RRRR') as EXIT_CONFERENCE_DATE,
PR_LETTER_MASTER.REVIEW_TAX_SEASON as REVIEW_TAX_SEASON,
PR_LETTER_MASTER.STATE_SOCIETY_NUM as STATE_SOCIETY_NUM,
PR_LETTER_MASTER.STATE_SOCIETY_NAME as STATE_SOCIETY_NAME,
PR_LETTER_MASTER.SECONDARY_LETTER_SEQUENCE as SECONDARY_LETTER_SEQUENCE,
PR_LETTER_MASTER.CREATION_DATE as CREATION_DATE,
PR_LETTER_MASTER.STATE_CODE as STATE_CODE ,
PR_LETTER_MASTER.DELIVERY_EMAIL_ID as DELIVERY_EMAIL_ID,
PR_LETTER_MASTER.TEAM_CAPT_FIRST_NAME as TEAM_CAPT_FIRST_NAME,
PR_LETTER_MASTER.TEAM_CAPT_LAST_NAME as TEAM_CAPT_LAST_NAME,
to_char(PR_LETTER_MASTER.DT_RAB_PRESENTATION,'FMMonth DD, RRRR') as DT_RAB_PRESENTATION,
PR_LETTER_MASTER.RAB_DESCRIPTION as RAB_DESCRIPTION ,
PR_LETTER_MASTER.TEAM_CAPT_MIDDLE_INITIAL as TEAM_CAPT_MIDDLE_INITIAL,
pr_letter_master.salutation as Salutation
from PRISM.PR_LETTER_MASTER PR_LETTER_MASTER
where secondary_letter_sequence in (:secondary_sequence)]]>
</sqlStatement>
<sqlStatement name="Q2">
<![CDATA[select followup_description from pr_letter_details where secondary_letter_sequence = :SECONDARY_LETTER_SEQUENCE]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="letter1" source="Q1">
<element name="LETTER_DATE" value="LETTER_DATE"/>
<element name="FIRST_NAME" value="FIRST_NAME"/>
<element name="MIDDLE_INITIAL" value="MIDDLE_INITIAL"/>
<element name="LAST_NAME" value="LAST_NAME"/>
<element name="ADDRESS_LINE1" value="ADDRESS_LINE1"/>
<element name="ADDRESS_LINE2" value="ADDRESS_LINE2"/>
<element name="ADDRESS_LINE3" value="ADDRESS_LINE3"/>
<element name="CITY" value="CITY"/>
<element name="STATE" value="STATE"/>
<element name="ZIP" value="ZIP"/>
<element name="ZIP_PLUS" value="ZIP_PLUS"/>
<element name="SALUTATION" value="SALUTATION"/>
<element name="REVIEW_TYPE" value="REVIEW_TYPE"/>
<element name="DT_RAB_PRESENTATION" value="DT_RAB_PRESENTATION"/>
<element name="RAB_DESCRIPTION" value="RAB_DESCRIPTION"/>
<element name="SIGNATURE_NAME" value="SIGNATURE_NAME"/>
<element name="SIGNATURE_PHONE_NUMBER" value="SIGNATURE_PHONE_NUMBER"/>
<element name="SIGNATURE_TITLE" value="SIGNATURE_TITLE"/>
<element name="SIGNATURE_EMAIL_ID" value="SIGNATURE_EMAIL_ID"/>
<element name="TEAM_CAPT_MIDDLE_INITIAL" value="TEAM_CAPT_MIDDLE_INITIAL"/>
<element name="TEAM_CAPT_FIRST_NAME" value="TEAM_CAPT_FIRST_NAME"/>
<element name="TEAM_CAPT_LAST_NAME" value="TEAM_CAPT_LAST_NAME"/>
<element name="REVIEWED_FIRM_NUMBER" value="REVIEWED_FIRM_NUMBER"/>
<element name="REVIEWED_FIRM_NAME" value="REVIEWED_FIRM_NAME"/>
<element name="REVIEW_NUMBER" value="REVIEW_NUMBER"/>
<element name="LETTER_ID" value="LETTER_ID"/>
<group name="Detail" source="Q2">
<element name="followup_description" value="followup_description"/>
</group>
</group>
</dataStructure>
</dataTemplate> -
RE: HR ABAP Multiple selection problem on input selection-screen
hi friends,
I AM Facing one problem in HR abap report selection-screen , in my report employee details data getting based on payroll area
of selection-screen. Here iam SELECTION-SCREEN declarations made in program level NOT created REPORT CATEGORY FOR
PNP LDB.
ACTUAL MY PROBLEM IS IF I SELECT SINGLE PAYROLL AREA IN SELECTION-SCREEN IT GETTING DATA PERFECTLY FOR THAT
PAYROLL AREA
EX. ZA - PAYROLL AREA IF I SELECT IN SELECTION SCREEN IT FETCHING THAT PAYROLL AREA DATA PERFECTLY, PROBLEM
IS IF I SELECT MULTIPLE PAYROLL AREAS IN SELECTION-SCREEN PAYROLL AREA FIELD ZA AND ZB PAYROLLS IT FETCHING
ONLY ZA -PAYROLL DATA ONLY IT IS NOT FETCHING DATA FROM ZB PAYROLL AREA.MY REQUIREMENT IS IT SHOULD FETCH
BOTH PAYROLL DATA AND SHOWING .
HERE IAM GIVING MY SELECTION SCREEN DECLARATION SYNTAX.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS:
S_ABKRS FOR P0001-ABKRS NO INTERVALS," NO-EXTENSION, " PAY ROLL AREA
S_PERSA FOR P0001-WERKS NO INTERVALS," NO-EXTENSION, " PERS.AREA
SELECTION-SCREEN END OF BLOCK B2 .
PLEASE Any body knows solution for this selection give me reply.
regards,
gopalIf you are using Logical DB PNP why are you coding Selection Fields for ABKRS and WERKS? Both of these fields are defined in the PNP Selection Screen and if you use those fields then SAP will handle filtering the data.
-
Multiple tab problem in Fire Fox, URL pane is not changing
Open multiple tabs
the url shown in url pane does'nt change but stays which has entered latest one.
the url pane text wont change even when you swap to another tab.A couple of possible causes:
First check to see if an add-on is causing this, add-ons can cause problems with the location bar not updating. For details of how to check this see https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
The second possible cause is a problem with the file that stores details of bookmarks and browsing history. I don't think this will be the cause in your case, as if there is a problem with that file you will normally get multiple problems. For details on this see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite -
Sender Proxy - Multiple Message problem
Hello,
I have a problem in a proxy process. I have a Sender Proxy which reads a file and sends it to PI. The file is converted into IDocs and sent to SAP ERP. The problem is that my mapping is splitting the file and sending multiple IDocs. So in my mapping I have Split template.
To the messages default the Messages and Message tags are added. The problem is when I sent my message from Proxy I am not able to add these Messages and Message tags.
Is there a way to add it? Or is it not possible?
Thanks.>>I am not able to add these Messages and Message tags
Not very clear about the question.
As I understand you get extra message tags when you change the occurance of messages in signature tab of message mapping.
Have a look at the below blog for sending mutliple Idocs.
I guess, it would eliminate the need of message tags.
You donu2019t ave to change the occurance in Message Mapping . Just change the IDoc XSD as given in this blog
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change -
Hi Gurus,
In a query I am using the custom defined - Variable, Formula Variable & Formula, here variable are used for customer inputs. And when I am executing the query at English language I am getting the description for Variable, Formula Variables and Formula. But when I am executing the same query other than English language I am not getting the description for all of them and it was displaying the technical name of the Variables, due this problem end-user are not able to give the input values for query execution.
How I can maintain the multiple languages for Variable, Formula Variables and formulas.
Regards,
PRKhttp://help.sap.com/saphelp_bw30b/helpdata/en/43/a1f5388b99f321e10000000a11402f/content.htm
i think u need to have texts in other languages too.have look át the help which describes how to translate texts in bw.
Maybe you are looking for
-
I keep getting a message on my Mac saying: Shockwave Player Error To view the movie, open your browser in the 32-bit mode. 1) In Safari, select applications/safari in the Finder and click more info 2) Ensure that Open in 32-bit mode is selected 3) Re
-
HP laserjet pro 200 m276nw scanning issue
i just got my hp laserjet pro 200 m276nw and i was just plug in the power card and was printing from flash drive and scanning to flash drive for about 2 weeks . it work fine ,until yesterday i tried scanning to my flash drive and the result on the s
-
How to access query name in MSAccess Database?
<p> I am using MsAccess as Database.The driver is not supporting some of the features, then how can I retrieve information such as getting the query name, if any way pls do help. Thanx. </p>
-
Business Objects Explorer XI R3.1 SP1 (Polestar) installer does not start
I am trying to install Business Objects Explorer XI R3.1 SP1 on Business Objects Edge Professional 3.1 on Win2k8 Server, but the installer dialog box disappears once I click "next" on "Configure Web Application Server" dialog box. Note: When I use "d
-
HT201272 Encoding error in iBooks
The pages of my iBook went blank. How do I get them book. I can't download to the same device.