Multiple Item Information - problem
I updated to iTunes 8. Now, whenever I try to "Get Info" on more than one music file, the content in the "Multiple Item Information" window gets displaced. Please refer to this jpeg to understand what I mean:
http://img.photobucket.com/albums/v294/mkeopong/iTunesscreen.jpg
Any ideas why? Any help in resolving this problem would be greatly appreciated. Thanks.
Actually I meant on the Appearances tab, not the Themes tab.
You right-click on any blank space on your desktop, choose Properties, then click the Appearance tab.
Anyway, worth a shot. Sorry to hear it didn't work!
Sounds like there's some other bugs with itunes v8 needing a certain color resolution setting or else the whole screen is pink.
In itunes 7, there was a huge bug where users were forced to set their display settings to 1024x768 in order to accept the iTunes license agreement. Nice, huh? Apparently that's fixed - haven't seen posts about that since v8 was released.
From the screenshots posted on the Get Info for multiple tracks, it looks like more display settings hijinx from iTunes. I changed some stuff on my system, but never got a display like that.
Message was edited by: Katrina S.
Similar Messages
-
How do you use the Multiple Item Information dialog box ???
How do you use the Multiple Item Information dialog box ???
Where are the instructions on how the information in the Multiple Item Information dialog box equates to ...
1. The way iTunes sorts tracks and albums
2. The reason to select a leading check box
3. Why there are Option selections (Yes /No) and leading check boxes.
4. Why some changes remain in the track info, but do not "take effect" in iTunes (Part of a compilation is an example)
Looked in Help, Support, went to the local Genius bar for an hour, even arrainged a call from apple support ...
ThanksAs Christopher says, it's a compilation. Different tracks are by different artists.
Setting the *Album Artist* field to *Various Artists* and setting *Part of a compilation* to Yes should be all that is required. Depending on your *Group compilations when browsing* setting ( I recommend On ) either should suffice but I suggest doing both.
Based on your commentary, I selected all the "O Brother" tracks, and checked the boxes for everything line that was blank in the Info and the Sort panes. Only exceptions were the album name and the disc number 1 of 1 and the artwork. I blanked and checked anything else.
That's not what I meant. When you select multiple tracks, only those values which +are already common+ to all tracks are displayed. Typically these will include Artist, though not with compilation albums, Album Artist, Album, No. of Tracks, Genre plus various sort fields. A blank value may indicate that different tracks have different values or it may be that the value is blank for all tracks. For the drop down values on the Options tab the value shown may not reflect the information in every tag. If values you expect to be common, such as Album Artist or the Album title are not displayed you can simply type these in and click OK. This will often be enough to group the album.
If you place a checkmark against the blank boxes and apply changes then you will clear those fields so you should only do this if that is the effect you want. Putting a checkmark next to an empty (representing different values) *Track No.* box, for example, will just clear the all the track numbers which is very rarely useful.
Adding then removing extra text is for a specific problem where despite all common values being identical across the tracks of the album iTunes seems to "remember" that it should see two albums. A typical example would be when an album originally listed as *Album CD1* & *Album CD2* is given disc numbers X of Y and then has the Album name changed to Album. I've seen iTunes merge all but one track into the new album, but insist on listing one remaining track separately, despite both albums having the same title. In this case I've found overtyping the album title again has no effect whereas changing it to AlbumX and then back to Album does what I was trying to achieve in the first place.
Don't forget that even properly organsied albums may still break up if you don't chose an album-friendly view. Sorting on the track name or track number columns can be useful in some circumstances but in general I revert to Album by Artist when browsing through my library.
tt2 -
How do you get to the "Multiple Item Information" window so I can click "Part of a compilation:?
How do you get to the "Multiple Item Information" window so I can click "Part of a compilation"? When I transfer a CD to iTunes, and the CD has ten tracks, it loads as ten different albums. Also, once this happens, do I have to delete the album and start over or is there a way to merge the albums in iTunes? Using iTunes 10.04.08.
And you've made me remember that using the compilation flag may only work in iTunes if you go into the Songs view, then use View > Column Browser > Show Column Browser and then View > Column Browser > Group Compilations to make sure this line is ticked.
It is also best if View > Column Browser > Use Album Artists is also ticked.
tt2 -
There is no album artwork in the Multiple items information box for all albums
I have iTunes 10.0.5 and all my album artwork is present but when i bring up the Multiple item information box by clicking on an album there is no artwork there?
but there is artwork on the actual album. im wondering if this is why when im uploading music to the internet using FTP transfer the artwork doesnt come up next to the song name. It does with some and with others there is no art.
All the songs have ID3tags versoin 2.4 and have been converted to a MP3 file but still doesnt work.
Check this image to understand what i mean more.
So from the right itunes is showing an album with the album art, in the middle is showing the Multiple items information boc and on the left its showing my FTP with albumart work showing and some not showing?
PLease can someone help*Why is artwork not showing on my iPod when it's there in iTunes?*
iTunes will display a cover in many of it's views provided at least one track from the album has embedded artwork. The iPod appears to load only the artwork from track one to create the cover flow and album views which means that it can sometimes fail to display art for albums even when you can see the art in iTunes. Further, when tracks are played on the iPod, artwork is displayed if and only if it exisits in the currently playing track, so track one may show art while track two does not.
*How to find tracks without artwork*
To find all the tracks without artwork so that you can update them you can try http://www.stum.de/itunes-find-tracks-without-artwork/ for Windows or http://dougscripts.com/itunes/scripts/scripts13.php for Macs. If you're using Google or other FWSE to locate suitable images they should be jpg's and ideally square, 320x320 pixels or above and borderless to give the best results in the various menus. If you have artwork for some tracks of an album, but not others, select a track with artwork, right-click (Option-Click for Macs) on the art & click copy, then select all the tracks of the abum, use CTRL-I or Option-I to *Get Info* and then paste the image into the artwork box.
*Rebuild artwork cache*
Sometimes the artwork cache becomes corrupt and fails to show correct artwork, even when this is properly set up in iTunes. To rebuild the artwork cache, connect your iPod to iTunes. Locate the iPod in the Sources pane on the left-hand side, then select the Music tab. Remove the tick from *Display album artwork on your iPod*, sync the iPod, reselect the option & sync again.
tt2 -
When viewing multiple item information, I was wondering what the checkboxes next to "Artist", "Album Artist", etc... are used for.
When checked, it means that you are going to apply whatever is in the box to all of the selected items.
-
Sorting / Get Info for Multiple Item Information
I want to sort based on album artist and then album. (Can I/How do I) select a secondary sort item? How do I suggest additions to the Multiple Item Information dialog, specifically sort album artist, sort album)?
Click on Album column header a few times.
It will cycle Album -> Album by Artist -> Album by Year and back to Album.
How do I suggest additions to the Multiple Item Information dialog, specifically sort album artist, sort album)?
No need to.
Fill in the info in one sort field, then click okay.
Right click on that song then *Apply sort field* and select which field you want to apply. -
Multiple Item Information - Sorting: broken?
I think the Album Artist column is near the top of the sorting hierarchy. Previously if I entered more than one Album Artist for a single album that would take precedence over track numbers in my listing (sorted by Album). I could neutralize this by putting a "1" or common word into the 'Album Artist' entry of the 'Multiple Item Sorting' Tab. That's the one you get when you Get Info on a whole album.
This is broken now. Or at least does not have the effect it used to. Putting a common word there for the entire album does not allow the album to sort by another criterion.*HowTo: Grouping Tracks Into Albums*
Excuse the long post, but hopefully covering all the bases (that I can think of) will help you fix the other issues you are likely to run into as you try to organise your iTunes library.
*Use an album friendly view*
iTunes will let you sort music on many columns, some of which are unlikely to group albums together or put the tracks in their normal order. The most useful order for editing the library is probably *Album by Artist*. If you're not already there, select the list view and click on the column heading for Album until it reads Album by Artist.
*One cover, too many tracks*
The iPod (and iTunes to a lesser extent) conflates two or more albums with the same title, most obviously with *Greatest Hits*. On the iPod this can result in one album acting as a combination of two or more. Selecting any cover gives all the tracks of all albums with the same title. The workaround for this "Greatest Hits" bug is to give each album a unique title - I tend to go for *Album - Album Artist* as this reads clearly in the iTunes browser. Alternatively you could use the wording as it appears on the cover or append different numbers of spaces for each different album. Somewhat oddly, setting different values for Sort Album doesn't work.
*Missing Artist or Album not with others by same artist*
iTunes relies on the Gracenote CDDB database when identifying CD's. This often marks collections or anthologies of an artist's work as a compilation. In iTunes, however, the compilation flag has the logical function of grouping together tracks with the same album name, but different artists on each track, e.g. "Now That's What I Call Metal 666!". These compilations are then all grouped together at the end of cover flow. Most of us however, would expect "Greatest Hits" albums to be listed with the other albums by the same album artist. For albums which are essentially by a single album artist or group it is best to set the appropriate value for the album artist and clear the compilation flag.
*One album, too many covers*
For true compilations, where each track is by a different artist, the answer is to set the compilation flag to true and enable the iTunes preference to *Group compilations when browsing*. If the album is not a compilation however, any tracks which list guest artists may be treated as separate items. Filling in the Album Artist field is enough to link things in iTunes. Sadly, however, the iPod ignores the Album Artist field when grouping albums so this is only a partial solution. You can simply mark the entire album as a compilation which seems to be the way iTMS handles it, however that's not an ideal fix. Short of waiting for Apple to address this issue (and as far as I can tell it goes back to the 1st gen. of iPods) we need a workaround. What I do is to put any additional artist info. in square brackets after the song name. E.g. *Track \[Feat. Guest\]* and then set *Artist=Album Artist* for each track. For anthologies where the Album Artist is credited as part of another group, e.g. for Cream tracks on an Eric Clapton anthology, I use *Track \[As Group\]*. For a track where the main Album Artist doesn't receive a credit, e.g. the first track of the Slim Shady LP credited to Jeff Bass, I just set the track name to *Track \[Guest\]* while still setting the artist to the album artist. N.b. I use square brackets to indicate that this is information about the track as distinct from the song title and also use this style for Mix/Live/Bonus info.
Addendum: I don't own an iPhone or iPod Touch to check but I'm told that with the V3.x firmware these now group tracks on the value of Album Artist in a logical fashion.
*One album, still too many covers*
iTunes may split albums into two or more sections if some tracks from the album have different values for Artist, Album Artist, Album, No. of Discs or Part of a Compilation. Tiny differences such as trailing spaces, accented characters or variants of symbols can sometimes be quite hard to spot. The iPod is also more sensitive to case variations and may split or reorder an album that looks okay in iTunes. Normally overtyping the desired value for each shared field will complete the grouping of the album into one entity. Occasionally, however, this method seems to fail. When this happens I've found that you can force every field to update properly by adding some extra text - e.g. a trailing X, which once applied seems to complete the joining of the tracks into one album. Once this has happened the extra data can be removed and the album should remain properly grouped.
*Tried that, there are STILL too many covers!*
The Sort Artist, Sort Album & Sort Album Artist fields can be used to override the normal sort order. For example iTunes automatically drops leading articles (a/an/the) so "The Beatles" are arranged under "B" instead of "T". Occasionally different tracks from the same album can have different values in these sort fields which can also break up the grouping. Making the sort columns visible in iTunes can help with spotting & correcting such problems.
*One cover for multi-disc album*
Multi-disc albums are often listed as *Album (CD1)* for CD 1, *Album (CD2)* for CD 2 etc. To display these properly using just one cover, each disc should have the correct *Disc X of Y* values set, and then the entire album should be given the single title Album. Being somewhat obsessive I also renumber the tracks sequentially, working backwards from the last track (so that no two tracks ever have the same number) until I reach disc 1. BTW You can still give the individual discs different artwork should it be relevant so that the correct artwork will be displayed as the album progresses.
*Tracks out of sequence*
Check that all tracks have the same/correct disc no. For a single disc album this should be either blank (my preference) or 1 of 1. iTunes will sort tracks with a disc no. of 1 before those that are blank. Just for fun the iPod sorts them the other way around. In addition ensure that the Artist, Album Artist, Album, Sort Artist, Sort Album Artist & Sort Album fields are consistent across all tracks.
N.B. The first release of iTunes 9 is ignoring the disc no. value when sorting as Album by Artist or Album by Year. Either make the track numbers seqential across the album or live with it until the next build.
*One artist, many names*
With some artists, particularly classical composers, you should be aware of alternative representations of their names. E.g. 2Pac vs. Tupac. The menus will work best if for each artist you standardise on just one form of their name. E.g. make a choice between Mozart, W.A. Mozart or Wolfgang Amadeus Mozart, and then apply it consistently. For classical music I tend also to use the Composer as the Artist & Album Artist and either discard the performer details or place these into the Comments field. The Sort Artist/Sort Album Artist fields can group alternate forms in iTunes but these will break up again on the iPod. It is best therefore to use Artist & Album Artist consistently so that the name is displayed the way that you want and Sort Artist & Sort Album Artist to control where it is listed.
Addendum: Again I don't own an iPhone or iPod Touch to check but I'm told that with the V3.x firmware the system fails to pick up on the Sort Album Artist value and sorts albums in Cover Flow by Album Artist instead.
tt2 -
10.5.0.142 Multiple items information issue
Hi guys,
I'm using iTunes v10.5.0.142 now. I've just recognized the latest iTunes is a bit buggy as I can't edit multiple songs' informations, such as Part of compilation, Gapless playback, etc. I mean the checkboxes on the Options sheet are there and active but the dropdown menus are inactive regardless of whether I click the checkboxes or not (see attachement, sorry for localized version of iTunes). I can edit these informations for each songs separately but it's very annoying and it takes forever (just imported about 1000 tracks from my audio CDs to iTunes). Can somebody help me how to activate those inactive dropdowns or solve this issue any other way?
Thank you!I had the same problem and i downloaded microsoft fixit software and it did fix the issue. Here is the link for that guyshttp://support.microsoft.com/fixit/ When your on this page, dont change the first option n 2nd option be Connect to the internet or networks and for 3rd option choose Automatically diagnose and fix common security setting on Windows. and run the software and enjoy itunes store.........
-
Multiple item update problem in IDOC_INPUT_PORDCR1
Hello Experts,
I have used message type PORDCR1 and basic idoc type PORDCR102 to create purchase orders using Inbound Idocs. Inbound Idocs are created using function module IDOC_INBOUND_WRITE_TO_DB.
From this function module I am getting error Idoc number if idoc has more than one item. It says the segment E1BPMEPOITEM cannot be found.
I want the inbound idocs be cretaed and sent to function module IDOC_INPUT_PORDCR1 to create purchase orders.
But I am failing in creating the inbound Idocs itself when there are more than one item data. Why it is happening so when it is giving correct Idoc with one item and one item segment E1BPMEPOITEM. Why it is saying that the segment is not found when it exists?
Can anybody please help me in resolving this?
Thanks in advance.
Kumar
Edited by: TVA Kumar on Jan 28, 2010 3:17 PMHi Kumar.
Try to create the IDoc using test tool WE19, then you'll find out how the IDoc should look.
If you want more than one line item in the IDoc, you will have to replicate the E1BPMEPOITEM segment a number of times, then you need the same number of E1BPMEPOITEMX segments, then a number of E1BPMEPOACCOUNT segments and then a number of E1BPMEPOACCOUNTX segments etc.
I.e. first all the E1BPMEPOITEM, then all the E1BPMEPOITEMX etc.
I'm not sure it's really necessary, but I think you should use the field PO_NUMBER in all above mentioned segments.
For the first occurence of each segment type, set PO_NUMBER to 10, for the next occurence set 20 etc, so that there's a connection between the different segment types that belong to the same data item.
Good luck.
Regards
Elisabet -
Outlook 2010 multiple item select problem
Hi,
I have a maddening issue with Outlook 2010. It has to do with a feature that has always worked 100% issue free in older versions of Outlook.
Outlook is somehow losing its mind where it comes to range selections. Specifically, there are 2 issues, with steps to reproduce.
Issue 1:
step 1) select a message
step 2) scroll down in the inbox, and shift-select a message 30 lines down (note: any number, not just 30, will do)
step 3) right click on the range, and select "Mark as read" (note: any other right-click action will do as well)
note: Upon completion of step 3, the range selection is lost inside of the inbox user interface.
step 4) to regain the view of the selected range, press and hold the shift key and then arrow up then back down
note: Upon completion of step 4, the entire range of 30 messages is shown as selected once more
Issue 2:
step 1) select a message
step 2) scroll up in the inbox, and shift-select a message 30 lines above (note: any number, not just 30, will do)
step 3) right click on the range, and select "Mark as read" (note: any other right-click action will do as well)
Upon completion of step 3, the range selection is lost inside of the inbox user interface.
step 4) to regain the view of the selected range, press and hold the shift key and then arrow up then back down
note: Upon completion of step 4, the entire range of 30 messages is NOT shown as selected; rather, only the number of messages that fit in the inbox view that were part of the selection are shown as highlighted. ie, if only 10 of the 30 fit in the
current view, only the 10 are shown as selected.
This is maddening, as it does not happen every single time.
Workarounds I have tried that did not solve the issue:
1) Update all BIOS and driver settings to the latest editions
2) Replace the mouse
3) Turn off the preview pane
4) Deleted the existing Outlook profile, and then created a new one
Please advise, this is an infuriating issue, which never occurred with older editions of MS Outlook!Hello,
I tried your steps, but I cannot reproduce step 3. The selection didn't lost when I right clicked on the range and selected "Mark as read".
Please try to open Outlook in safe mode to check if the problem persists. To open Outlook in safe mode, press Windows key + R to open the Run command, type
outlook /safe and press Enter.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
i noticed recently that once i uploading images with MULTIPLE ITEM INFORMATION box in itunes and getting straight through the music folder i have no option to upload tiff. and some jpeg. images connected with that album. the box don't allow me to upload them.i need help here,please.i know i can directly paste the artwork in small window in itunes left corner once i marked all the songs in multiple change.
The following line tells me that this is not a template file, but a document created from a template called index.dwt
<html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
This means that you saved a child document as a template file at some stage.
If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template. -
MULTIPLE ITEM PROBLEM IN VL31N BDC
hI FRIENDS ,
I AM POSTING A BDC OF TRANSACTION VL31N ,ie FOR SCHEDULE AGREEMENT INBOUND DELIVERY.I CREATE A FUNCTIONAL MODULE OF THE SAME AND CALL IT FROM AN ASP PAGE,IN THAT THERE IS PO NUMBER 5500000986 WHICH HAS TWO ITEMES 62 AND 95 RESPECTIVLY OF SAME MATARIAL NUMBER R010230123041002 AND DIE NUMBER 2304P,NOW THE PROBLEM IS THIS BDC IS WORKING WHEN THERE IS ONLY ONE ITEM BUT GIVES AN ERROR "CANT CREAT INBOUND DELIVERY FOR PO NO ...' WNEN IT HAS MULTIPLE ITEM.WHAT SHOULD I DO ? I ALSO USED LOOP BUT IT ALSO DOSENT WORK AS IT WILL ADD ALL OPEN QTY OF PO 986 AND UPDATE AGAINST ITEM NO 95.
CODE IS AS FOLLOWS:.........
FUNCTION y_synie_bdcinbdly.
""Local interface:
*" IMPORTING
*" VALUE(CTU) LIKE APQI-PUTACTIVE DEFAULT 'X'
*" VALUE(MODE) LIKE APQI-PUTACTIVE DEFAULT 'N'
*" VALUE(UPDATE) LIKE APQI-PUTACTIVE DEFAULT 'L'
*" VALUE(GROUP) LIKE APQI-GROUPID OPTIONAL
*" VALUE(USER) LIKE APQI-USERID OPTIONAL
*" VALUE(KEEP) LIKE APQI-QERASE OPTIONAL
*" VALUE(HOLDDATE) LIKE APQI-STARTDATE OPTIONAL
*" VALUE(NODATA) LIKE APQI-PUTACTIVE DEFAULT '/'
*" VALUE(EXTNID) LIKE MAKT-MAKTG
*" VALUE(VENDORNO) LIKE LFA1-LIFNR
*" VALUE(PONUMBER) LIKE EKKO-EBELN
*" VALUE(ITEMNUMBER) LIKE LIPS-VGPOS
*" VALUE(MATERIAL) LIKE MAKT-MAKTG
*" VALUE(DLYQTY) LIKE LIPS-LFIMG
*" VALUE(BTCHNO) LIKE LIPS-CHARG
*" VALUE(POSLR) LIKE EKES-EBELP OPTIONAL
*" EXPORTING
*" VALUE(SUBRC) LIKE SYST-SUBRC
*" VALUE(INDELYNO) LIKE SY-MSGV2
*" VALUE(MSG1) LIKE SY-MSGV1
*" VALUE(MSG2) LIKE SY-MSGV2
*" VALUE(MSG3) LIKE SY-MSGV3
*" VALUE(MSG4) LIKE SY-MSGV4
*" TABLES
*" MESSTAB STRUCTURE BDCMSGCOLL
*" ERRTAB STRUCTURE YSYNERRMSGS
*" INDLYTAB STRUCTURE YSYN_QTYTAB
Updated by ANAND SYNISE 19.1.2007
DATA: BEGIN OF bdctab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdctab.
DATA: datenow(10) TYPE c,
fldvar(30) TYPE c,
fldno TYPE i,
flditoc(6) TYPE c,
qty(13) TYPE c.
DATA maxposnr LIKE lips-posnr.
DATA testposnr TYPE posnr.
DATA itemnoint TYPE i.
CONCATENATE sy-datum6(2) '.' sy-datum4(2) '.' sy-datum+0(4) INTO datenow.
CLEAR bdctab.
REFRESH bdctab.
PERFORM open_group USING group user keep holddate ctu.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '4007'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'RV50A-VERUR_LA'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '/00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-LIFNR'.
bdctab-fval = vendorno.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LV50C-BSTNR'.
bdctab-fval = ponumber.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-VERUR_LA'.
bdctab-fval = extnid.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=MKAL_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIKP-BLDAT'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=POPO_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-POSNR(01)'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '0111'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'RV50A-PO_MATNR'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = 'WEIT'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-PO_MATNR'.
bdctab-fval = material.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=POLO_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-POSNR(01)'.
APPEND bdctab.
*ADDED BY ANAND ON 22-01-2007
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = ITEMNUMBER . "ITEMNUMBER = LIPS-VGPOS
APPEND bdctab.
************ENDED***********************
ADDED BY MILIND 19.01.2007
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = poslr .
APPEND bdctab.
* ENDED * *
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LIPS_SELKZ(01)'.
bdctab-fval = ''.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '/00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-CHARG(01)'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
QTY = INDLYTAB-DLYQTY.
qty = dlyqty.
bdctab-fnam = 'LIPSD-G_LFIMG(01)'.
bdctab-fval = QTY.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIPS-CHARG(01)'.
* BDCTAB-FVAL = INDLYTAB-BTCHNO.
bdctab-fval = btchno.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-program = 'SAPMV50A'.
bdctab-dynpro = '1000'.
bdctab-dynbegin = 'X'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_OKCODE'.
bdctab-fval = '=SICH_T'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'LIKP-BLDAT'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_CURSOR'.
bdctab-fval = 'LIPS-MATNR(02)'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFDAT_LA'.
bdctab-fval = datenow.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'RV50A-LFUHR_LA'.
bdctab-fval = '00:00'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CLEAR bdctab.
bdctab-fnam = 'BDC_SUBSCR'.
bdctab-fval = 'SAPMV50A'.
APPEND bdctab.
CALL TRANSACTION 'VL31N' USING bdctab MODE 'N' MESSAGES INTO messtab.
subrc = sy-subrc.
PERFORM close_group USING ctu.
CLEAR bdctab.
REFRESH bdctab.
IF sy-subrc EQ 0.
indelyno = sy-msgv2.
ENDIF.
LOOP AT messtab.
MOVE: messtab-msgid TO errtab-msgid,
messtab-msgnr TO errtab-msgnr,
messtab-msgv1 TO errtab-msg1,
messtab-msgv2 TO errtab-msg2,
messtab-msgv3 TO errtab-msg3,
messtab-msgv4 TO errtab-msg4.
APPEND ERRtab.
ENDLOOP.
LOOP AT errtab.
SELECT SINGLE text FROM t100
INTO errtab-errmsg
WHERE msgnr EQ errtab-msgnr AND arbgb EQ errtab-msgid
AND sprsl EQ sy-langu.
MODIFY errtab.
ENDLOOP.
ENDFUNCTION.Hi,
Check this code:
REPORT Z_CUSTOMER_UPLOAD .
D A T A D E C L A R A T I O N S *
DATA:BEGIN OF IT_CUSTOMER OCCURS 0,
KUNNR LIKE MV10A-KUNNR,
VKORG LIKE MV10A-VKORG,
VTWEG LIKE MV10A-VTWEG,
MATNR LIKE MV10A-MATNR,
KDMAT LIKE MV10A-KDMAT,
MEGRU LIKE MV10A-MEGRU,
SELKZ TYPE C value 'X',
LPRIO LIKE MV10A-LPRIO,
ANTLF LIKE MV10A-ANTLF,
END OF IT_CUSTOMER.
DATA:BEGIN OF IT_success OCCURS 0,
KUNNR LIKE MV10A-KUNNR,
VKORG LIKE MV10A-VKORG,
VTWEG LIKE MV10A-VTWEG,
MATNR LIKE MV10A-MATNR,
KDMAT LIKE MV10A-KDMAT,
MEGRU LIKE MV10A-MEGRU,
SELKZ TYPE C value 'X',
LPRIO LIKE MV10A-LPRIO,
ANTLF LIKE MV10A-ANTLF,
END OF IT_success.
DATA:BEGIN OF IT_error OCCURS 0,
KUNNR LIKE MV10A-KUNNR,
VKORG LIKE MV10A-VKORG,
VTWEG LIKE MV10A-VTWEG,
MATNR LIKE MV10A-MATNR,
KDMAT LIKE MV10A-KDMAT,
MEGRU LIKE MV10A-MEGRU,
SELKZ TYPE C value 'X',
LPRIO LIKE MV10A-LPRIO,
ANTLF LIKE MV10A-ANTLF,
END OF IT_error.
DATA: L_INDEX TYPE SY-TABIX.
DATA:IT_BDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
IT_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE.
ERROR MESSAGE TABLE
DATA:IT_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : C_S TYPE C VALUE 'S',
C_E TYPE C VALUE 'E'.
*DATA: IT_SUCCESS LIKE IT_CUSTOMER OCCURS 0,
IT_ERROR LIKE IT_CUSTOMER OCCURS 0.
DATA : V_RECTOT TYPE I,
V_RECERR TYPE I,
V_RECSUC TYPE I.
S E L E C T I O N - S C R E E N *
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : P_FILE LIKE RLGRAP-FILENAME .
SELECTION-SCREEN : END OF BLOCK B1.
A T S E L E C T I O N - S C R E E N *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
to get F4 help for p_file
PERFORM F4_FILENAME USING P_FILE.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Uploading data from flat file into it_tab
PERFORM BDC_UPLOAD USING P_FILE.
PERFORM PROCESS_DATA.
PERFORM POPULATE_BDC.
E N D O F S E L E C T I O N *
*END-OF-SELECTION.
PERFORM DISPLAY_REPORT.
*& Form F4_FILENAME
text
-->P_P_FILE text
FORM F4_FILENAME USING P_P_FILE.
DATA:L_FILE TYPE IBIPPARMS-PATH.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
IMPORTING
FILE_NAME = L_FILE .
P_P_FILE = L_FILE.
ENDFORM. " F4_FILENAME
*& Form BDC_UPLOAD
text
-->P_P_FILE text
FORM BDC_UPLOAD USING P_P_FILE.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = P_P_FILE
I_BEGIN_COL = 1
I_BEGIN_ROW = 1
I_END_COL = 8
I_END_ROW = 1000
TABLES
INTERN = IT_DATA
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BDC_UPLOAD
*& Form PROCESS_DATA
text
--> p1 text
<-- p2 text
FORM PROCESS_DATA.
SORT IT_DATA BY ROW COL.
LOOP AT IT_DATA.
CASE IT_DATA-COL.
WHEN 1.
IT_CUSTOMER-KUNNR = IT_DATA-VALUE.
WHEN 2.
IT_CUSTOMER-VKORG = IT_DATA-VALUE.
WHEN 3.
IT_CUSTOMER-VTWEG = IT_DATA-VALUE.
WHEN 4.
IT_CUSTOMER-MATNR = IT_DATA-VALUE.
WHEN 5.
IT_CUSTOMER-KDMAT = IT_DATA-VALUE.
WHEN 6.
IT_CUSTOMER-MEGRU = IT_DATA-VALUE.
WHEN 7.
IT_CUSTOMER-LPRIO = IT_DATA-VALUE.
WHEN 8.
IT_CUSTOMER-ANTLF = IT_DATA-VALUE.
APPEND IT_CUSTOMER.
ENDCASE.
ENDLOOP.
ENDFORM. " PROCESS_DATA
*& Form POPULATE_BDC
text
--> p1 text
<-- p2 text
FORM POPULATE_BDC.
DATA:L_COUNTER TYPE N,
L_STRING TYPE STRING.
LOOP AT IT_CUSTOMER.
AT NEW KUNNR.
CLEAR L_COUNTER.
L_INDEX = SY-TABIX.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_dynpro using 'SAPMV10A' '0100'.
perform bdc_field using 'MV10A-KUNNR'
IT_CUSTOMER-KUNNR.
perform bdc_field using 'MV10A-VKORG'
IT_CUSTOMER-VKORG.
perform bdc_field using 'MV10A-VTWEG'
IT_CUSTOMER-VTWEG.
perform bdc_field using 'BDC_OKCODE'
'/00'.
ENDAT.
L_COUNTER = L_COUNTER + 1.
CLEAR L_STRING.
perform bdc_dynpro using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-MATNR(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-MATNR.
CONCATENATE 'MV10A-KDMAT(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-KDMAT.
CONCATENATE 'MV10A-MEGRU(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-MEGRU.
perform bdc_field using 'BDC_OKCODE'
'/00'.
*-- For Page down in Call Transaction Mode
IF L_COUNTER = 14.
CLEAR L_COUNTER.
PERFORM BDC_DYNPRO USING 'SAPMV45A' '4001'.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'=P+'.
ENDIF.
perform bdc_dynpro using 'SAPMV10A' '0200'.
CONCATENATE 'MV10A-SELKZ(' L_COUNTER ')' INTO L_STRING.
perform bdc_field using L_STRING
IT_CUSTOMER-SELKZ.
perform bdc_field using 'BDC_OKCODE'
'=SELE'.
perform bdc_dynpro using 'SAPMV10A' '0300'.
perform bdc_field using 'MV10A-KDMAT'
IT_CUSTOMER-KDMAT.
perform bdc_field using 'MV10A-LPRIO'
IT_CUSTOMER-LPRIO.
perform bdc_field using 'MV10A-ANTLF'
IT_CUSTOMER-ANTLF.
PERFORM BDC_FIELD USING 'BDC_OKCODE'
'/EBACK'.
at end of kunnr.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
perform bdc_field using 'BDC_OKCODE'
'=SICH'.
CALL TRANSACTION 'VD51' USING IT_BDC MODE 'A' UPDATE 'S'
MESSAGES INTO IT_MESSAGES.
CLEAR IT_BDC.
REFRESH IT_BDC.
ENDAT.
IF NOT IT_MESSAGES[] IS INITIAL.
PERFORM FORMAT_MESSAGE.
ENDIF.
ENDLOOP.
ENDFORM. " POPULATE_BDC
*& Form bdc_dynpro
text
-->P_0273 text
-->P_0274 text
FORM bdc_dynpro USING VALUE(P_0273)
VALUE(P_0274).
IT_BDC-PROGRAM = P_0273.
IT_BDC-DYNPRO = P_0274.
IT_BDC-DYNBEGIN = 'X'.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM. " bdc_dynpro
*& Form bdc_field
text
-->P_0278 text
-->P_RECORD_KUNNR_001 text
FORM bdc_field USING VALUE(P_0278)
VALUE(P_0279).
IT_BDC-FNAM = P_0278.
IT_BDC-FVAL = P_0279.
APPEND IT_BDC.
CLEAR IT_BDC.
ENDFORM. " bdc_field
*& Form FORMAT_MESSAGE
text
--> p1 text
<-- p2 text
FORM FORMAT_MESSAGE.
DATA: L_MSG(100).
LOOP AT IT_MESSAGES.
READ TABLE IT_CUSTOMER INDEX L_INDEX.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = IT_MESSAGES-MSGID
LANG = SY-LANGU
NO = IT_MESSAGES-MSGNR
V1 = IT_MESSAGES-MSGV1
V2 = IT_MESSAGES-MSGV2
V3 = IT_MESSAGES-MSGV3
V4 = IT_MESSAGES-MSGV4
IMPORTING
MSG = L_MSG
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
write:/ l_msg.
ENDLOOP.
ENDFORM. " FORMAT_MESSAGE
reward if helpful,
keerthi -
Problem in multiple item for change document objects
hi gurus,
I have created change document object in tcode SCDO . It had giveN function module /TMW/CHG_OBJ1_WRITE_DOCUMENT.
CDPOS AND CDHDR tables are updated with changed data. now i am trying to display all old and new data in se38 program.
here my problem is when ever i changed multiple item data , my program showing first item details only . I need to show all item data when ever i changed parallel . please help me where is my problem .
thank youI think this is issue with function module generated thru SCDO Please check in your function module inside that the following function modules are used
CALL FUNCTION 'CHANGEDOCUMENT_OPEN'
CALL FUNCTION 'CHANGEDOCUMENT_MULTIPLE_CASE'
CALL FUNCTION 'CHANGEDOCUMENT_CLOSE'
if not then there may be issue with SCDO
a® -
BAPI_SALESORDER_CREATEFROMDAT2 multiple items problem
hi,
experts ,I'm facing a problem when using BAPI_SALESORDER_CREATEFROMDAT2 to creat SO,I create a sale order with six items and one of the item has problem. It is possible for me to create the SO successfully with the the other three items ?Hi,
When creating Sales Order with reference or without reference then you can do a test run and as per suggested by Maxim that if there is any issue with the particular line item then you can exclude that line and proceed to create order with the rest of the line items.
There is no such restriction that if there is error in the line item then you cannot create order with rest of the line items. -
Is it possible to query multiple items in a single OPC read?
I am trying to read several data items at one time via OPC. Is this possible? If so, how? I have tried passing multiple URLs to specific items and a single URL header with multiple variable names. Both methods return an OPC error about invalid items. I am trying to do this to speed up OPC access times. Reading each item one-at-a-time is a little time consuming for our application.
The only way to read multiple datapoints via OPC is to build an OPC item that contains multiple pieces of information. I checked this here, and I had no problem reading an array of data from an OPC Server with DataSocket.
I read the "opc:/Matrikon.OPC.Simulation/Random.ArrayOfReal8" data item from a Matrikon OPC Simulation Server that publishes an array data item. The OPC Demo server is available for free download at http://www.matrikon.com/opc/htdocs/simx.htm. You can read this as an array of doubles in LabVIEW.
For your application all you will need to read your data multiple items at a time is a server that can publish arrays.
Hope this helps.
Maybe you are looking for
-
Query Service in SAP WEB AS 6.20
Hello everybody, I want to use Object Services at a SAP WEB AS 6.20 system. In the SAP help documents I have read that a Query Service is part of that Object Service. Generating a Persistence Class and the Class Actor (CA-Class) at a WEB AS 6.20 Syst
-
Ora-01031 insufficient privileges oracle
Hi to all, I have installed oracle 10g and created new database. When i try to create the simple view its showing the following error. ora-01031 insufficient privileges oracle Note: if i have logged thru admin user, i could able to create the view (s
-
Unable to configure in walton mobile phone
Walton Mobile
-
I am moving to a Mac from a PC using Excel. In my Excel spreadsheet the top row stays on top no matter how far I scroll down. (It's easy to set up.) I can't seem to be able to do it in Numbers. Can anyone help me with this? Thanks, Fred
-
Hello, Right now I have a matrix of Strings in the SessionBean and want to set that data to a dataTable in a jsp page. I know I must set it in value="data" but what format should the data have? Is it Ok to set a matrix? In that case, why isn't it sho