Multiple JavaScript errors when opening aspx file in Dreamweaver

I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

Hi Steven,
Not sure if this is related, but can  you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

Similar Messages

  • Javascript error when opening CS3 on pc..?

    I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
    'JavaScript Error'
    'Error Number 45'
    'Error string :Object is Invalid'
    'Line 387'
    also
    'JavaScript Error'
    'Error Number 45'
    'Error String; Object is Invalid'
    'Line 428'
    there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
    Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
    Anyone help?

    hi
    thanks for all the helpful info
    i tried to reinstall INDESIGN only... didnt work same problem.
    i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
    I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
    I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
    thanks again
    Date: Sat, 2 Jan 2010 09:50:57 -0700
    From: [email protected]
    To: [email protected]
    Subject: Javascript error when opening CS3 on pc..?
    I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
    You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
    Peter
    >

  • Fix for Dreamweaver CC 2014.1 JavaScript Error With All ASPX Files

    Entire morning wasted.
    Adobe's upgrade to Dreamweaver 2014 to 2014.1 on Windows 7 Professional has broken the product across the board and it no longer opens any .aspx pages correctly.  A large number of people use .NET and now we can no longer access/use these files/pages without multiple JavaScript errors.  Particularly those that have edited the MMDocumentTypes file to make the product work in the first place since they stopped supporting the users that develop in ASP.NET.
    Every time a .aspx file is now opened, the following JavaScript error is received: "While executing translateCustomControl in ExternalRenderers.html, a JavaScript error occurred.  Click 'close' and it appears again...over and over.  Our sites are all unable to open in DW because of this.  It worked fine in earlier versions of DW, including 2014.  It's only 2014.1 that broke everything.
    The fix for this:
    1. Follow instructions on this out-of-date help file: Change, add recognized file extensions | Dreamweaver
    2. (and the part that's new): The MMDocumentTypes file is located in  C:\Users\*your username*\AppData\Roaming\Adobe\Dreamweaver CC\Configuration\DocumentTypes directory. Open that file and add aspx back to the <documenttype id="HTML"> declaration at the top.
    I am posting this issue here in hopes that some of the users won't waste most of the day trying to figure this out.
    Chris Lee

    Hi Ivan,
    I'm having that exact same problem now...in addition to that JavaScript error message coming back.  I submitted a bug report last week about this and received the following reply:
    Hi Chris,
    We would like to let you know that we able to reproduce this issue at our end. Thanks for reporting this.
    We will try to prioritize it for fixing. This might take some time. We thank you for your patience with us in this regard.
    Please let us know if you need help regarding anything else. We will be more than happy to help you.
    Thanks,
    Arindam Ghosh
    Dreamweaver Team,
    Adobe Systems
    Hopefully they can get this fixed soon, as it's ground my work in the software to a halt.
    Chris

  • How do I fix a javascript error when opening Dreamweaver?

    DW CS6 recently started having 2 JavaScript errors while opening the application and at least 1 additional JavaScript error when using the Insert Image command.  Can someone provide some advice on fixing this issue?

    This will help -
    Index to Dreamweaver FAQ
    Look at the very first issue.

  • Can Not Open ASPX Files In Dreamweaver CC ?

    I just upgraded from Dreamweaver CS6 to Dreamweaver CC and now can no longer double click to open ASPX files.
    Is this something that was removed from Dreamweaver CC?
    Or, is there something I need to install or edit in order for it to work again?
    I tried adding it to the Extensions.txt file, but doesn't seem to be working unless I entered it into incorrectly.
    My Extensions.txt File...
    <<
    ASP,ASPX,HTM,HTML,SHTM,SHTML,XHTML,STM,SSI,JS,JSON,APPCACHE,XML,XSL,XSD,DTD,RSS,RDF,LBI,DW T,CONFIG,CSS,SCSS,LESS,SASS,TLD,TXT,PHP,PHP3,PHP4,PHP5,PHP-DIST,PHTML,TPL,INC,SQL,SVG,PRO: All Documents
    ASP,ASPX
    HTM,HTML,HTA,HTC,XHTML:HTML Documents
    SHTM,SHTML,STM,SSI,INC:Server-Side Includes
    JS,JSON:JavaScript Documents
    XML,DTD,XSD,XSL,XSLT,RSS,RDF:XML Files
    LBI:Library Files
    DWT:Template Files
    CSS,SCSS,LESS,SASS:Style Sheets
    APPCACHE:Manifest
    HTACCESS:Directory Configuration File
    TXT:Text Files
    PHP,PHP3,PHP4,PHP5,TPL,PHP-DIST,PHTML:PHP Files
    TLD:Tag Library Descriptor Files
    SQL:SQL Files
    VTM,VTML:VTML Files
    SVG:Scalable Vector Graphics Files
    PRO:Adobe Proto Files
    >>
    Any help or direction would be greatly appreciated.

    You can apply the default file association in windows. Follow http://windows.microsoft.com/en-in/windows-vista/change-which-programs-windows-uses-by-def ault
    Also, you can try adding it in DW preferences.
    1) Go to Preferences < File Types/Editors.
    2) Click on the "+" icon on left Column and add the extension you need.
    3)  Click on the "+" icon on right column and add the Editor as Dreamweaver. Locate the Dreamweaver.exe file installed at "C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC".
    4) Click on Make Primary Button and Click OK.
    5) Close DW and re-launch.
    I hope this helps
    Thanks
    Bhawna Gupta

  • Edge Animate shows Javascript error when opening

    Hi,
    Im working on a edge animate file for school. My program is all up to date and have been working on it for a while.  Now  when I go to open the file, show me the error:
    "Loading Failed, please check your page for JavaScript errors"
    I don't write jquery or modify the js.
    What can I do? Why this happend?
    PLEASE HELP!
    Dropbox - interdesign.zip

    Hello,
    Please try the suggestions in the link below.
    Why can’t it just work? « Adobe Edge Animate Team Blog
    Regards
    Vivek

  • JavaScript error when opening BPEL process map

    This just recently started happening when I try to open a BPEL process map in Process Designer.
    I get a JavaScript error. It's a Internet Explorer Script Error window that pops up sayingL
    Line 467
    Char 5
    Error: Access id denied
    Code 0
    URL: file://C:\Eclipse\plugins\bpelz_0.9.10\html\bpel.html
    Do you want to continue running scripts on this page?
    No matter what I click is just get a Eclipse pane saying Access is denied.
    I am hoping my process maps are not corrupt now.

    See if this helps:
    Troubleshooting JavaScript errors in Dreamweaver
    http://www.adobe.com/go/19105
    Nadia
    Adobe® Community Expert : Dreamweaver
    CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    ~ Customisation Service Available ~
    http://www.csstemplates.com.au
    ~ Forum Posting Guidelines ~
    http://www.adobe.com/support/forums/guidelines.html
    CSS Tutorials for Dreamweaver:
    http://www.adobe.com/devnet/dreamweaver/css.html
    "tkatcher" <[email protected]> wrote in
    message
    news:etce5v$2nh$[email protected]..
    > Error when dreamweaver is opening:
    > The following Javascript error occured:
    > At line 3556 of file "c:\program
    files\macromedia\dreamweaver
    >
    8\configuration\shared\common\scripts\dwscriptsserver.js": if
    (nodelist
    > SyntaxError: illegal character
    >
    > When the program opens, I cannot copy, cut, or paste
    without an error
    > message.
    > When I try to upload, the upload does not complete
    saying it cannot find
    > the
    > server.
    >
    > This just happened after I installed a new PNY Video
    Card and the driver.
    > I
    > did not load any software other then the driver.
    >
    > Please advise.
    >

  • Error when opening indd-file: Either the file does not exist, you do not have permission, or the...

    Hi! I'm having trouble opening a indd-file. It was sent to me as a zip-fil along with the used fonts and links. When I try to open the file, I'm getting this error: "Either the file does not exist, you do not have permission, or the file may be in use by another application". I've tried to look up this error both here in these forums and through google, but can't find a similar case. Hope someone can help me with this. Please let me know if you need more information/details, and I'll provide. Thanks!

    function(){return A.apply(null,[this].concat($A(arguments)))}
    I'm suspecting it to come from a mac user, if that could influence the case...
    It does come from a Mac, as is proven by the fonts, which are of no use on my Windows machine, but that doesn't prevent my CS4 to open it without any problem. It seems to me it's a perfectly regular CS2 file.
    Just for cheers I set the file to Read-only, but my InDesign opens it regardless (again as a copy, because it's a "converted" file).
    Could it be something in your environment? No network read/write privileges, insufficient free hard disk space, stuff like that?

  • Error when opening XLSX file with Excel 2003 SP3, file does open but in read only mode with temporary name

    I am using Excel 2003 SP3 and have the Office 2007 compatibility pack installed.  When I open Office 2007 formatted Excel files (XSLX) directly in Windows Explorer, I receive the following error if I do not have Excel already opened:
    "Windows cannot find '<path to file>'.  Make sure you typed the name correctly, and then try again.  To search for a file, click the Start button, and then click Search."
    Even though I receive the error, the file does open; however, it opens in Read Only mode with a name such as "Xl0000024.xls".  The number seems to increment up each time it happens.
    Now here is the strange part.  If I have Excel already open and try to open the file in Windows Explorer, the file opens fine in Modify mode with no error and with the correct file name.
    I Googled the error I was getting and found KB211494.  It says I should uncheck the box in Options on the General tab that says "Ignore other applications", but this box is already unchecked in my case.  Any other ideas?  This is
    really frustrating as a small percentage of our company has upgraded to Office 2007 with the rest still on Office 2003.

    This may be a file association problem.  To solve that:
    In Windows 7:
    1. Right-click the file,
    2. Select "Open With" 
    select [Your Program Here]
    3. Check always use this program. 
    In Windows XP:
    1. Locate the file as you have described above
    2. Right click the file
    3. Select Open with from the pop-up menu
    4. Click Choose default program…
    5. Select Excel in the Recommended Programs box
    6. Check Always use the selected program to open this kind of file
    7. Click on OK.
    1.  Make Excel not available from Office 2007 listed under Programs and Features in Control Panel.
    2. Take a registry backup using the steps given here
    3. In the registry editor window expand HKEY_CLASSES_ROOT and navigate to .xls right and delete it.
    4. Exit Registry Editor
    5. Undo Step 1 to make Excel available.
    6.  Restart the computer and verify it the issue is fixed.
    If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

  • Error when opening PDF files from SAP.

    Hi Gurus
    I have posted this question in ABAP Development section also. Please read the below text.
    We are having a strange intermittent problem with Adobe Reader. When we try to open PDF files from SAP Frontend we get an error pop-up. The pop-up does not have any text. The title of the pop-up has "Adobe Reader". There is a blue question mark and an OK button.
    This issue occurs few times a day in Windows Vista.
    This issue does not occur in Windows XP.
    Since past few weeks, we have been trying to find some error/warning/atleast some text in log files of SAP, OS, Adobe Reader, Registry entries, Event Viewer. So far, we have not found anything.
    SAP is not able to help as this issue occurs intermittently and said when they tried, the issue did not occur. They made two attempts and in each attempt they tried 10 times to reproduce the issue. This issue occurs intermittently.
    Environment
    SAP R/3 4.7 EE SAP_Basis 620 Support Package 61
    Windows Vista Enterprise
    Adobe Reader 9.0 and Adobe Reader 9.1 (tried with both versions)
    SAPGUI 710 Patch 12 (latest patch). It also occured in Patch 11.
    Please suggest
    Thank you
    Pavan

    Now I got to capture the screenshot, however not able to attach/upload here but it says:
    'Reading Untagged Documents'
    lets say i tried to open 6 page document then it said:
    'This 6-page document is untagged and must be prepared for reading. While the document is being
    analyzed, your assistive technology will not be able to interact with this application. '
    then it asked for Reading options
    then a checkbox for to confirm 'Always use the settings from the Reading Preferences (Do not show this dialog again)
    then 'OK/START' and 'cancel' buttons
    It seems, this is the problem with Adobe w.r.t Vista.
    thanks
    Bhudev

  • Error when opening the file

    Hi all,
    we are sending the purchase orders from SAP to Third party system as file using IDOC to File scenario.
    In XI side successfully gone through in MDT also i didnt see any errors.
    But when we open the file in third party system its giving errors.
    Can anybody face this problem before please tell what cause the problem.
    the file is PurchaseOrder_20071730-121942-758.txt
    This is the time stamp in the file what time must be in MDT for this message because i didnt see any 12-19-42 time in MDT is there any time difference in the file and MDT if it is what time must i see it in MDT for identifying the message.
    Answer will be rewarded.
    Prasad.

    Hello Prasad,
    You can see the filename in MDT.
    In your reciever file adapter you will see theres a link below message id. click on that.
    new window will open . Click on the page down button you will see something like this..
    <i>2007-08-02 11:43:48 Success Write to file "
    10.1.1.35\xi_public\inbound\in20070802-114348-390.xml" as binary, size 460 bytes</i>
    Regards,
    Sumit

  • Smart View error when opening Powerpoint files read-only

    Users are experiencing the following error when they open a Powerpoint file as read only. Using MS Office 2007 with Hyperion 11.1.2.1 Doesn't happen in edit mode. Error reappears every time user pages down to next slide. Quite annoying!
    Shape. Tags : Invalid request. Presentations cannot be modified.
    Has anyone experienced this issue and resolved it?
    Thanks,

    Source: My oracle support
    =============================================================================================================================
    Applies to:
    Hyperion Planning - Version: 11.1.2.1.000 and later [Release: 11.1 and later ]
    Information in this document applies to any platform.
    Symptoms
    In Smart View Version 11.1.2.1.000, when attempting to open a PowerPoint document that is already open by other user the following error occurs:
    ERROR : Shape.Tags: Invalid Request. Presentation cannot be modified.
    Cause
    This issue has been verified as Unpublished Bug 12418027: SMART VIEW ERROR : SHAPE.TAGS : INVALID REQUEST. PRESENTATION CANNOT BE MODIFIED
    The cause of the problem is that when a presentation is edited by another user, an exception will be thrown while trying to query the tags in the presentation from a different process.
    Solution
    This issue has been fixed in the Oracle Hyperion Smart View for Office, Release 11.1.2.0.000 Patch Set 1 (PS1): 11.1.2.1.102 Release.
    This patch is available via My Oracle Support:
    1. Log into the My Oracle Support portal.
    2. Choose the Patches & Updates tab.
    3. Enter the Patch Name or Number from the drop-down box.
    4. Perform a search for Patch:12968304 for your corresponding OS platform.
    5. The patch file includes both installers and the readme.
    Additional Information:
    Please refer to the patch readme for system requirements, dependencies, and installation instructions.

  • Illustrator CS6 gets error when opening AI files - Mavericks 10.9

    I installed Mavericks yesterday ... lucky me, to be guinea pig in the office for this upgrade.
    Am having issues with Illustrator. First it wouldn't open and had to runt he Java install, that took care of that. I am able to make new files without problem and open EPS files, but cannot open existing AI files UNLESS going to File > Open. If I double click on an AI file I get the error "The appliation can't be found"
    After looking for similar issues I am not finding anyone else reporting a similar problem. I am not running any 3rd party plug ins. Any ideas???
    Thanks for the help.

    Issue:
    Clients logging into File Services over SMB with OS X 10.9 experience hanging connection upon login attempt.
    Root Cause:
    OS X 10.9 now utilizes a new SMB2 stack written by Apple.   Apple's SMB2 implementation is not compatible with many other SMB2 NAS products on the market today while Windows 7, 8, and 8.1 works just fine.   In short, its an Apple bug.
    Workaround Option 1:
    To force your connection to be SMB1, simply type cifs://servername instead of smb://servername when connecting to a Windows or NAS share.  This is by far easier and requires no real configuration changes.
    Workaround Option 2:
    To force all connections to be SMB1:
    Open A terminal window
    paste in the following line followed by the return key(should be all on one line): 
    echo "[default]" >> ~/Library/Preferences/nsmb.conf; echo "smb_neg=smb1_only" >> ~/Library/Preferences/nsmb.conf
    What the command does:
    Creates a file called nsmb.conf  in your  home directory at the path ~/Library/Preferences/nsmb.conf.
    Adds directives to force SMB connections to use the SMB1 protocol.  This is slower but stable.
    How to remove the workaround:
    Open a terminal window
    paste in the following at the prompt and then hit the return button:
    rm ~/Library/Preferences/nsmb.conf
    Notes:
    Its a good idea to restart your mac before trying to connect to your storage again. This will clear any hung SMB processes from previous attempts to connect to your storage before implementing this workaround.

  • Tdm importer error when opening tdms file

    I am getting a error when trying to open a tdms file that had been opened by labview, written to, and then closed. The error is:
    USI encountered an exception:
    (175):Error while initializing interface
    I can sort of understand this error occuring when I have the file open in labview (actually I consider this to be a bug since there is no reason why another application should not be able to access a file in read only mode even if it is currently open by another application)
    but in my case I am definitely closing the tdms reference and it still will not import unless I stop the top level vi.

    It is a known bug that if you open a TDMS file with an option other
    than "read-only", no other process can get access to that file, even if
    it is just for reading. The issue is filed as CAR#  49794JWJ
    (status: fixed). This only applies if the file is still open, which you
    commented on, but which doesn't appear to be your actual problem.
    Apparently, you are using the Storage VIs to handle your TDMS files,
    otherwise you couldn't get a USI exception. Have you tried opening your
    file with the TDMS File Viewer on the TDM Streaming palette? If that
    doesn't work, please provide us with your TDMS file, and if possible,
    your VI. This would be a problem that we're not aware of at this point.
    Thank you,
    Herbert

  • "Parse Error" when opening .WFT file

    I have a .wft file left behind by a consultant; when I try to open it in WF Builder (2.6.3.5) I'm getting the following errors:
    1300: Could not load.
    1223: Parse error in line 45663.
    1211: Invalid name for 'NAME' field of 'ROLE' entity.
    204: Value must be upper case.
    I'm almost certain that we opened all his files before he left; no one - to my knowledge - has changed any of them.
    The scary thing is (other than the fact that I'm supposed to be migrating these files into production soon!) is that WF Builder simply won't open the file... period. I can't poke around in it to try and see what's wrong because I can't get into it at all.
    Anyone seen this sort of thing before? I saw where someone posted about a .WFT giving similar errors because it contained Japanese characters... I kind of doubt that that is the problem in this case.

    Apparently that was it. I found these two entries in the file:
    BEGIN ROLE "CFO Approval Pool"
    DISPLAY_NAME = "CFO Approval Pool"
    DESCRIPTION = "CFO Approval Pool"
    NOTIFICATION_PREFERENCE = "MAILHTML"
    LANGUAGE = "AMERICAN"
    TERRITORY = "AMERICA"
    STATUS = "ACTIVE"
    END ROLE
    BEGIN ROLE "Notification of Approved PO"
    DISPLAY_NAME = "Notification of Approved PO"
    DESCRIPTION = "Notification of Approved PO"
    NOTIFICATION_PREFERENCE = "MAILHTML"
    LANGUAGE = "AMERICAN"
    TERRITORY = "AMERICA"
    STATUS = "ACTIVE"
    END ROLE
    When I replaced the text in quotes that followed "BEGIN ROLE" and saved a copy, the copy opened without a hitch. I considered that text to be for documentation purposes and not considered in syntax... but obviously I was wrong.
    Thanks!

Maybe you are looking for