Multiple line selection for RRI in WAD
Is it possible to select multiple lines from 1 query and do a RRI to the receiver query. Eg : Select multiple POs and then go to PO details query which shows PO details of multiple POs in WAD and both the results shown in the same web report?
I tried the below solution, but all I get is the display of the entire Master data dump and not the filtered values. Any suggestion?????
Rao
Posts: 135
Registered: 6/24/04
Forum Points: 8
Re: Multiple line selection for RRI
Posted: Feb 4, 2008 2:22 PM in response to: LAKSHMI HARINDRAN Reply
Yes. You can do this. You create web template with ANALYSIS web item. In the item parameters of ANALYSIS web item, you can set a property, single line or multiple for the runtime selection. Once you do this, you create a button option or context selection menu option to jump target. In the button (RRI button) in the command sequence, the first command should be SET_SELECTION_STATE_BY_BINDING and then, the RRI command to jump to the target. Hope it will help.
Venny.
Hi, Do you have any solution on this. please suggest. Thanks
Similar Messages
-
Multiple line selection for RRI
Is it possible to select multiple lines from 1 query and do a RRI to the receiver query. Eg : Select multiple POs and then go to PO details query which shows PO details of multiple POs.
Also when you do a RRI from 1 q to other , does the filter criteria of 2nd query pop up to the user ?
thanks in advance ,
LHHi Lakshmi,
Yes, it is possible to select multiple lines from one query. It means as you said, if you select multiple PO's i.e., Po's belong to a customer. If 10 PO's belong to single customer, then if you select that customer and Goto RRI in the report, you will get the details of all those 10 PO's in the RRI report. This is done in RSBBS tcode>After creating RRI>Assignment details-->Map the required fields of sender to the reciever queries according to the need.
When you use RRI, the reciver query, i.e., the second query will contain the filter selection as usual in the normal report when executed.
Hope this helps u...
Regards,
KK. -
F-44 ZBAPI MULTIPLE LINE SELECTIONS FOR WEB SERVICES
HI TO ALL,
I HAVE WRITTEN ZBAPI FOR POSTING MULTIPLE LINE SELECTIONS FOR TCODE F-44, THE ZBAPI CONSIST OF BDC PROGRAM, WHICH IS WORKING IN SAP SYSTEM PERFECTLY BUT WHEN I AM USING IT IN WEB SERVICES IT IS THROWING A ERROR MESSAGE.
PLEASE CAN ANY ONE TELL ME DOES THIS PROCESS WILL WORK OR NOT, IF YES HOW IS IT POSSIBLEHi Gabriel,
Let me try to answer some of your questions:
1) The "Requires Secure Access" attribute of a resource handler controls whether this handler must be accessed/consumed only over SSL (HTTPS). Oracle Database Cloud Schema Service is only offered over SSL, so this attribute does not have any effect on RESTful services deployed in this environment (because secure access is always required and there is no other way). That said, if you want to access such web service from your own APEX instance, your instance must have Oracle Wallet configured with appropriate SSL certificate.
2) The URI parameters are not required. If your web service returns data for many entities (for example, list of employees in employees/), you may not need a parameter. If your web service returns data for one specific entity (for example, details of one employee in employees/{id}), you may want to identify that entity with a URI parameter.
3) You can have many URI parameters, for example: customers/{id}/orders/{order_id}.
4) Yes, these are the same HTTP methods/verbs you would use from PHP.
5) If you are trying this POST example from your own APEX instance (not Oracle Database Cloud Schema Service) and you are trying to access a web service over SSL, then it is likely that the Oracle Wallet used by your instance does not include the required SSL certificate(s), or the Oracle Wallet is not configured at all.
6) I recommend to check RESTful Web Services for the Oracle Database Cloud white paper and Oracle REST Data Services Developers Guide. Oracle REST Data Services is the technology that enables RESTful services in the Oracle Database Cloud Schema Service.
You can certainly create your own web services in the Oracle Database Cloud Schema Service and consume them from the same environment.
Vlad -
Multiple line selection and then capturing the selected values
Dear all
in my alv program ,i need to capture multiple line selections using checkboxes.
I have appended check boxes by adding it in the internal table & filling in field catalog.
but problem is i'm not able to capture multiple selected check boxes dynamically,
i could capture only the last selected check box,
option i found was to use class method get-selected-rows,but i'm unable to use it properly, could anyone explain in detail
i have already gone through the various examples in sdn but i am not able to work out.
like using parameters etc....
CAN ANY ONE HELP ME WITH THE CODE
help reqired immediately,
Thanks in advance.Hi Ankur,
In the PAI, just after the selection of your user event, button or menu,
add this code before getting the selected records.
<b>CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.</b>
where grid1 TYPE REF TO cl_gui_alv_grid,
Now fetch the selected records.
Check this code for reference
C O M P A N Y C O N F I D E N T I A L **
Care should be taken to prevent its unauthorized use. **
REPORT zfipost MESSAGE-ID f4 NO STANDARD PAGE HEADING .
AUTHOR : Susmitha Susan Thomas
DATE : August 18, 2005
*Abridged Version : This report generates a list in Abap List Viewer of
all the selected records in VBKPF/VBSEG. * *
(TRANSACTION ZPPD:Modified from transaction FBV0)
-- Class definition--
CLASS lcl_event_receiver DEFINITION DEFERRED.
--Tables--
TABLES: vbkpf. " Belegkopf
TABLES: tsp1d, pri_params, spopli.
TYPE-POOLS slis.
---- Global Variables -
DATA: anzkr(6) TYPE n,
lsind LIKE sy-lsind,
no_output(1) TYPE c,
records(1) TYPE c,
xpick(1) TYPE c,
xpickc(1) TYPE c,
xbinp(1) TYPE c,
rc LIKE syst-subrc,
ok_code LIKE sy-ucomm,
index TYPE i,
char_x(1) TYPE c VALUE 'X',
post TYPE c,
ans TYPE n,
user(40) TYPE c.
DATA :BEGIN OF i_doctype OCCURS 0,
blart LIKE vbkpf-blart,
END OF i_doctype.
--AlV Initialization--
DATA: gs_layout TYPE lvc_s_layo,
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat TYPE lvc_s_fcat,
gs_index_rows TYPE lvc_t_row,
l_layout TYPE disvariant,
g_repid LIKE sy-repid,
g_max TYPE i VALUE 100,
ws_row_idx TYPE lvc_t_row ,
ws_row_no TYPE lvc_t_roid,
i_excl_func TYPE ui_functions,
ls_prnt TYPE lvc_s_prnt,
refresh TYPE c,
i_fieldcat TYPE lvc_t_fcat,
post(1) TYPE c,
accr_def(1) TYPE c,
rev_cd(3) TYPE c,
ch(1) TYPE c.
DATA: list_index LIKE sy-lsind,
flag TYPE n VALUE 0,
fl TYPE n VALUE 0,
g_container TYPE scrfname VALUE 'GRID_CONTAINER',
grid_container TYPE REF TO cl_gui_docking_container,
grid1 TYPE REF TO cl_gui_alv_grid,
custom_container1 TYPE REF TO cl_gui_custom_container,
event_receiver TYPE REF TO lcl_event_receiver,
gt_vbkpf1 TYPE STANDARD TABLE OF vbkpf WITH HEADER LINE,
i_vbkpf TYPE TABLE OF vbkpf WITH HEADER LINE,
i_ws_row_idx LIKE ws_row_idx WITH HEADER LINE.
---Internal table containing details of selected documents--
DATA : BEGIN OF gt_vbkpf OCCURS 0,
xpick(1) TYPE c,
belnr LIKE vbkpf-belnr,
gjahr LIKE vbkpf-gjahr,
bukrs LIKE vbkpf-bukrs,
blart LIKE vbkpf-blart,
budat LIKE vbkpf-budat,
bldat LIKE vbkpf-bldat,
bktxt LIKE vbkpf-bktxt,
waers LIKE vbkpf-waers,
usnam LIKE vbkpf-usnam,
xblnr LIKE vbkpf-xblnr,
rev_code(3) TYPE c,
rev_rsn(15) TYPE c,
rev_date(10) TYPE c,
linecolor(4) TYPE c,
END OF gt_vbkpf.
--Table to store long text--
DATA : BEGIN OF inline OCCURS 0,
tdformat TYPE tdformat,
tdline TYPE tdline,
END OF inline.
DATA: thead LIKE thead OCCURS 0 WITH HEADER LINE.
-- Records to be posted--
DATA: BEGIN OF tbkpf OCCURS 5.
INCLUDE STRUCTURE vbkpf.
DATA: END OF tbkpf.
---- Constants -
CONSTANTS: awtyp_bkpf TYPE awtyp VALUE 'BKPF '.
CONSTANTS: awtyp_space TYPE awtyp VALUE ' '.
Selection Screen
PARAMETER: funcl LIKE t020-funcl NO-DISPLAY. "P(ost),D(isplay),U(pd)
SELECTION-SCREEN SKIP 2.
SELECT-OPTIONS:
p_bukrs FOR vbkpf-bukrs,
p_belnr FOR vbkpf-belnr,
p_gjahr FOR vbkpf-gjahr,
p_budat FOR vbkpf-budat,
p_bldat FOR vbkpf-bldat,
p_blart FOR vbkpf-blart,
p_xblnr FOR vbkpf-xblnr,
p_bktxt FOR vbkpf-bktxt,
p_usnam FOR vbkpf-usnam.
SELECTION-SCREEN SKIP 1.
SELECTION-SCREEN BEGIN OF BLOCK blk
WITH FRAME TITLE text-010 NO INTERVALS.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(35) text-002.
PARAMETER norm_doc TYPE c
RADIOBUTTON GROUP doc DEFAULT 'X' .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(35) text-001.
PARAMETER ad_doc TYPE c
RADIOBUTTON GROUP doc .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(35) text-003.
PARAMETER all_doc TYPE c
RADIOBUTTON GROUP doc .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK blk.
CLASS lcl_event_receiver DEFINITION
For capturing events on the ALV *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
to capture all recently changed data.
handle_data_changed FOR EVENT data_changed OF
cl_gui_alv_grid
IMPORTING er_data_changed,
for hot spot
handle_hotspot FOR EVENT hotspot_click OF
cl_gui_alv_grid
IMPORTING e_column_id e_row_id.
ENDCLASS. " lcl_event_receiver (Definition)
CLASS lcl_event_receiver (Implementation)
For capturing events on the ALV *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
PERFORM f2200_handle_data_changed USING er_data_changed.
ENDMETHOD.
METHOD handle_hotspot.
PERFORM f2201_handle_hotspot USING e_column_id e_row_id .
ENDMETHOD.
ENDCLASS. " lcl_event_receiver (Implementation)
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
START-OF-SELECTION
START-OF-SELECTION.
---- Colors -
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
-------------------- Status und Title Bar----------------------------*
SET PF-STATUS funcl.
SET TITLEBAR funcl.
-- Read Records--
SELECT * FROM vbkpf INTO TABLE gt_vbkpf1
WHERE bukrs IN p_bukrs
AND ausbk IN p_bukrs
AND belnr IN p_belnr
AND gjahr IN p_gjahr
AND budat IN p_budat
AND bldat IN p_bldat
AND blart IN p_blart
AND bktxt IN p_bktxt
AND xblnr IN p_xblnr
AND usnam IN p_usnam
AND bstat EQ 'V'
AND ( awtyp IN (awtyp_bkpf, awtyp_space) OR
awtyp IS null )
ORDER BY PRIMARY KEY.
----Call the ALV Screen -
PERFORM alv_display.
END-OF-SELECTION.
FORM BELEG_PICKUP *
Indicate changing of the selected external record *
FORM beleg_pickup.
SET PARAMETER ID 'BUK' FIELD vbkpf-bukrs.
SET PARAMETER ID 'GJR' FIELD vbkpf-gjahr.
SET PARAMETER ID 'BLP' FIELD vbkpf-belnr.
CASE funcl.
WHEN 'P'.
IF anzkr IS INITIAL.
CALL FUNCTION 'ZPRELIMINARY_POSTING_POST_D'
EXPORTING
bukrs = vbkpf-bukrs
belnr = vbkpf-belnr
gjahr = vbkpf-gjahr.
ELSE.
IF sy-ucomm EQ 'BUCH'.
CALL FUNCTION 'ZPRELIMINARY_POSTING_POST_ALL'
EXPORTING
synch = char_x
bupbi = xbinp
TABLES
t_vbkpf = tbkpf.
ELSE.
CALL FUNCTION 'ZPRELIMINARY_POSTING_POST_ALL'
EXPORTING
bupbi = xbinp
TABLES
t_vbkpf = tbkpf.
wait up to 3 seconds.
commit work.
ENDIF.
ENDIF.
WHEN OTHERS.
IF sy-tcode = 'ZPPD'.
funcl = 'P'.
ENDIF.
CALL FUNCTION 'ZPRELIMINARY_POSTING_DISPLAY'
EXPORTING
bukrs = vbkpf-bukrs
belnr = vbkpf-belnr
gjahr = vbkpf-gjahr.
ENDCASE.
ENDFORM.
FORM TBKPF_FUELLEN *
Include records for posting in TBKPF *
FORM tbkpf_fuellen.
records = 'X'.
LOOP AT gt_vbkpf.
IF gt_vbkpf-xpick = 'X'.
CLEAR anzkr.
CLEAR records.
IF sy-subrc = 0.
anzkr = anzkr + 1.
MOVE-CORRESPONDING gt_vbkpf TO tbkpf.
APPEND tbkpf.
ELSE.
EXIT.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM.
FORM MALL *
Select All documents *
FORM mall.
LOOP AT gt_vbkpf.
gt_vbkpf-xpick = 'X'.
MODIFY gt_vbkpf.
ENDLOOP.
refresh = 'X'.
CALL METHOD grid1->refresh_table_display.
ENDFORM.
FORM EMAL *
Unselect all documents *
FORM emal.
LOOP AT gt_vbkpf.
gt_vbkpf-xpick = ' '.
MODIFY gt_vbkpf.
ENDLOOP.
refresh = 'X'.
CALL METHOD grid1->refresh_table_display.
ENDFORM.
Form alv_display *
To display the details on an ALV. *
FORM alv_display.
CALL SCREEN 100.
ENDFORM. " alv_display
*& Module PB0_100 OUTPUT
MODULE pb0_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'POSTDOC'.
--To verify that posting is complete.--
---- Setting the layout -
IF grid1 IS INITIAL.
PERFORM fill_table.
-- Initializing the field catalog--
PERFORM fieldcat_init CHANGING i_fieldcat.
-- Initializing the ALV GRID and CONTAINER--
CLEAR gs_layout.
gs_layout-info_fname = 'linecolor'.
gs_layout-grid_title = 'Parked Documents'(100).
gs_layout-zebra = 'X'.
gs_layout-cwidth_opt = 'X'.
gs_layout-sel_mode = 'A'.
gs_layout-edit = 'X'.
l_layout-report = sy-repid.
------ Create a custom container control for ALV Control----
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT grid_container
EXPORTING
dynnr = '100'
ratio = '100'
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
IF sy-subrc NE 0.
MESSAGE i000 WITH text-007. " Error in object creation
LEAVE LIST-PROCESSING.
ENDIF.
-- Create an instance of alv control--
CREATE OBJECT grid1
EXPORTING
i_lifetime = 1
i_parent = grid_container.
---- Disable all unwanted button in the ALV grid -
PERFORM disable_functions TABLES i_excl_func.
---- Call the display function of ALV grid -
CALL METHOD grid1->set_table_for_first_display
EXPORTING
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
is_print = ls_prnt
it_toolbar_excluding = i_excl_func
CHANGING it_outtab = gt_vbkpf[]
it_fieldcatalog = i_fieldcat.
ENDIF. " IF cl_gui_alv_grid=>offline IS INITIAL
CALL METHOD grid1->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
CALL METHOD grid1->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
---- Create a reciever object to handle events -
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR grid1.
SET HANDLER event_receiver->handle_hotspot FOR grid1.
CALL METHOD cl_gui_control=>set_focus EXPORTING control = grid1.
ENDIF. " IF grid1 IS INITIAL.
ENDMODULE. " PB0_100 OUTPUT
*& Form fill_table
Fills the data table to be passed to the ALV grid.
FORM fill_table.
LOOP AT gt_vbkpf1.
MOVE-CORRESPONDING gt_vbkpf1 TO gt_vbkpf.
IF ad_doc = 'X' OR all_doc = 'X'.
thead-tdobject = 'BELEG'.
CONCATENATE gt_vbkpf1-bukrs
gt_vbkpf1-belnr
gt_vbkpf1-gjahr INTO thead-tdname.
thead-tdspras = sy-langu.
thead-tdid = '0004'.
PERFORM read_text.
READ TABLE inline INDEX 1.
gt_vbkpf-rev_code = inline-tdline.
REFRESH inline.
CLEAR inline.
thead-tdid = '0005'.
PERFORM read_text.
READ TABLE inline INDEX 1.
gt_vbkpf-rev_rsn = inline-tdline.
REFRESH inline.
CLEAR inline.
thead-tdid = '0006'.
PERFORM read_text.
READ TABLE inline INDEX 1.
gt_vbkpf-rev_date = inline-tdline.
REFRESH inline.
CLEAR inline.
REFRESH inline.
CLEAR inline.
ENDIF.
APPEND gt_vbkpf.
CLEAR gt_vbkpf.
ENDLOOP.
ENDLOOP.
ENDFORM.
*& Form fieldcat_init
Initialize the field catalog
FORM fieldcat_init CHANGING i_fieldcat TYPE lvc_t_fcat.
DATA: i_fldcat TYPE lvc_t_fcat WITH HEADER LINE.
CHECKBOX
CLEAR i_fldcat.
i_fldcat-fieldname = 'XPICK'.
i_fldcat-checkbox = 'X'.
i_fldcat-key = 'X'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-outputlen = '4'.
i_fldcat-scrtext_l = 'ChkB'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BELNR'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-hotspot = 'X'.
i_fldcat-outputlen = '15'.
i_fldcat-scrtext_l = 'Document Number'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'GJAHR'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'FYear'.
i_fldcat-outputlen = '5'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BUKRS'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'CCode'.
i_fldcat-outputlen = '5'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BLART'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Type'.
i_fldcat-outputlen = '6'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BLDAT'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Doc Date'.
i_fldcat-outputlen = '12'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BUDAT'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Park Date'.
i_fldcat-outputlen = '12'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'BKTXT'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Document Header Text'.
i_fldcat-outputlen = '25'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'WAERS'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Curr'.
i_fldcat-outputlen = '7'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'USNAM'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Parked By'.
i_fldcat-outputlen = '13'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'XBLNR'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Reference Text'.
i_fldcat-outputlen = '19'.
APPEND i_fldcat TO i_fieldcat.
IF ad_doc = 'X' OR all_doc = 'X'.
CLEAR i_fldcat.
i_fldcat-fieldname = 'REV_CODE'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'RC'.
i_fldcat-outputlen = '2'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'REV_RSN'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Rev Reason'.
i_fldcat-outputlen = '15'.
APPEND i_fldcat TO i_fieldcat.
CLEAR i_fldcat.
i_fldcat-fieldname = 'REV_DATE'.
i_fldcat-tabname = 'GT_VBKPF'.
i_fldcat-key = 'X'.
i_fldcat-scrtext_l = 'Rev Date'.
i_fldcat-outputlen = '10'.
APPEND i_fldcat TO i_fieldcat.
ENDIF.
ENDFORM. " fieldcat_init
*& Module PAI_100 INPUT
MODULE pai_100 INPUT.
CASE ok_code.
WHEN 'BACK'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN 'EXIT'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN '%EX'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN 'BINP'.
DATA : ws_x TYPE c VALUE 'X'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Posting Documents Via Batch Input'
text_question =
'Are you sure you want to post all the selected documents?'
text_button_1 = 'Yes'
text_button_2 = 'No'
start_column = 25
start_row = 6
IMPORTING
answer = ans.
IF ans = '1'.
CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.
xbinp = 'X'.
PERFORM tbkpf_fuellen.
IF records = 'X'.
MESSAGE s999(zv) WITH text-007.
ELSE.
PERFORM beleg_pickup.
ENDIF.
ENDIF.
WHEN 'MALL'.
PERFORM mall.
WHEN 'EMAL'.
PERFORM emal.
WHEN 'RW'.
IF sy-dynnr = '1000'.
PERFORM exit_program.
ELSEIF sy-dynnr = '0100'.
LEAVE TO TRANSACTION 'ZPPD'.
ENDIF.
WHEN 'BUCH'.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Posting Document'
text_question =
'Are you sure you want to post all documents selected?'
text_button_1 = 'Yes'
text_button_2 = 'No'
start_column = 25
start_row = 6
IMPORTING
answer = ans.
IF ans = '1'.
CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.
perform tbkpf_fuellen.
IF records = 'X'.
MESSAGE s999(zv) WITH text-007.
ELSE.
PERFORM beleg_pickup.
ENDIF.
ENDIF.
WHEN 'PICK'.
DATA : check TYPE n,
no_rec TYPE c.
check = 0.
no_rec = 'X'.
CALL METHOD grid1->check_changed_data
IMPORTING
e_valid = ws_x.
index = 0.
LOOP AT gt_vbkpf.
funcl = 'D'.
index = index + 1.
IF gt_vbkpf-xpick = 'X'.
check = 1.
CLEAR no_rec.
READ TABLE gt_vbkpf1 INDEX index INTO vbkpf.
PERFORM beleg_pickup.
ENDIF.
ENDLOOP.
IF check = 0.
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = ws_row_idx.
IF NOT ws_row_idx IS INITIAL.
CLEAR no_rec.
ENDIF.
LOOP AT ws_row_idx INTO i_ws_row_idx.
READ TABLE gt_vbkpf1 INDEX i_ws_row_idx-index INTO vbkpf.
PERFORM beleg_pickup.
ENDLOOP.
IF no_rec = 'X'.
MESSAGE s999(zv) WITH text-007.
ENDIF.
ENDIF.
WHEN '&RNT_PREV'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&RNT'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '%SC'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&OL0'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&OAD'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&AVE'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&AQW'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&XXL'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '%PC'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN '&CRTEMPL'.
CALL METHOD grid1->set_function_code
CHANGING c_ucomm = ok_code.
WHEN OTHERS.
do nothing.
ENDCASE.
CLEAR ok_code.
ENDMODULE. " PAI_100 INPUT
*& Form exit_program
Exits from the program after freeing the grid and container *
FORM exit_program.
IF NOT grid_container IS INITIAL.
CALL METHOD grid_container->free.
ENDIF.
IF NOT grid1 IS INITIAL.
CALL METHOD grid1->free
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
OTHERS = 3.
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form f2200_handle_data_changed
To handle event of change in data in ALV.
-->P_ER_DATA_CHANGED text
FORM f2200_handle_data_changed USING ir_data_changed
TYPE REF TO
cl_alv_changed_data_protocol.
DATA : ls_mod_cell TYPE lvc_s_modi ,
lv_value TYPE lvc_value,
lflg_check TYPE i.
DATA : wa_vbkpf LIKE LINE OF gt_vbkpf.
SORT ir_data_changed->mt_mod_cells BY row_id .
LOOP AT ir_data_changed->mt_mod_cells
INTO ls_mod_cell
WHERE fieldname = 'I_PICK'.
IF NOT ls_mod_cell-value IS INITIAL .
CALL METHOD ir_data_changed->modify_cell
EXPORTING
i_row_id = ls_mod_cell-row_id
i_fieldname = ls_mod_cell-fieldname
i_value = ls_mod_cell-value.
READ TABLE gt_vbkpf INTO wa_vbkpf
INDEX ls_mod_cell-row_id.
IF ls_mod_cell-fieldname = 'I_PICK'.
wa_vbkpf-xpick = ls_mod_cell-value.
ENDIF.
MODIFY gt_vbkpf FROM wa_vbkpf
INDEX ls_mod_cell-row_id.
ENDIF .
ENDLOOP .
ENDFORM. " f2200_handle_data_changed
*& Form f2201_handle_hotspot
To handle event of clicking on hyperlink
-->P_E_COLUMN_ID text
FORM f2201_handle_hotspot USING p_e_column_id p_e_row_id.
READ TABLE gt_vbkpf1 INDEX p_e_row_id INTO vbkpf.
funcl = 'D'.
PERFORM beleg_pickup.
PERFORM exit_program.
ENDFORM. " f2201_handle_hotspot
Regards,
Susmitha
Dont forget to reward points for useful answers -
Same material can exist on multiple line items for the same order.
Hi
Is there any specific customising setting or web shop setting through which we can restrict user to add same material on multiple line items for the same order ?
RegardsNo.
But if this is a must requirement, you can do an elaborate check during order save in ORDER_SAVE BAdI and return error. So, it will be only during order save.
Eawar Ram
http://www.parxlns.com -
Multiple Range Selection for field Material in CS14
Hi friends ,
Is it possible to make multiple range selection for material field in tcode CS14 [used to compare primary and secondary BOM] i have made it ZCS14.
if i make matnr2 to matnr2-low
but my doubt is it feasible solution
please through some light on this
regards
sooryaDear Soorya,
What's your requirement? is that to compare the Alternative BOM's for multiple materials at the same time?
If it's going to be for comparing one more alternative for the same material,then it's a good report.
As per to my knowledge if the report is going to be for a list of materials Alternative BOM's means I dont
think whether it will be a fast(time wise) report.
Check & revert back.
Regards
Mangalraj.S -
DYNP_VALUES_READ Limitations for multiple lines select options
Hi all !
First post here, but a tough one I think. Here is my inquiry :
I have worked on an specific abap function used in many long abap list reports. Theses reports are launched in background processing. The aim of this routine is to stop the report execution if a background job with the same selection parameters is already launched for the current user (to Prevent useless several launch of a time-expensive program).
Because this routine is dynamic, I read the selection screen of the current report with the function 'DYNP_VALUES_READ'. And I compare the result with the variant of the backgroung job (read with function 'RS_VARIANT_CONTENTS').
The real problem is that function "DYNP_VALUES_READ" only extract the first line of select-options. I found an alternative solution to extract the select options values (a dynamic assign with field symbols), but external conversions (for WBS elements for example ) are lost, so the comparison detects differences between the background job's variant values and the current selection screen values.
Does anybody know a way to get entire select options values from a selection screen just as they are displayed on screen ?
Thanks for reading my message
Message was edited by: Thomas BRICOUTThomas,
Perhaps the following code will help you. A function module in the code captures everything on the selection screen into an internal table. It doesn't actually capture the information the way you want it, but I believe you will be able to work with it to achieve your desired result. If it doesn't meet your needs, it is still useful for printing selection screen fields and their values.
Bruce
report zybttes2.
tables: zf137, " 137 General Ledger Document Details Table
zf137a. " 137 General Ledger Document Details Table, Archive
selection-screen begin of block b1 with frame title text-004." BCT003
parameters: p_zf137 radiobutton group xxx, " BCT003
p_zf137a radiobutton group xxx. " BCT003
selection-screen end of block b1. " BCT003
selection-screen begin of block parameter with frame title text-001.
selection-screen skip 1.
select-options: s_date for zf137-zzpostdat.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-002.
selection-screen end of line.
selection-screen skip 1.
select-options: s_loan for zf137-zzloan.
selection-screen skip 1.
selection-screen begin of line.
selection-screen comment 3(6) text-003.
selection-screen end of line.
selection-screen skip 1.
select-options: s_ccentr for zf137-zzcostctr.
selection-screen skip 1.
selection-screen end of block parameter.
data: ww(3) type n.
data: zz(3) type c.
data: c1(1) type c value '0'.
do 2 times.
ww = ww + 1.
zz = ww. shift zz left deleting leading c1.
write: / zz.
enddo.
Capture and then print the selection screen fields and their values
data: begin of i_info occurs 20,
flag,
olength type x,
line like raldb-infoline,
end of i_info.
call function 'PRINT_SELECTIONS'
exporting
mode = 'TABLE'
rname = sy-cprog
rvariante = sy-slset
tables
infotab = i_info.
loop at i_info.
write: / i_info-line.
endloop.
write: / 'end'. -
Multiple line selection in report list
HI All,
I have a requirment to display multiple line items with a checkbox prefixed, and i should be able to select multiple line items with the checkbox provided and should keep the selectd line items in an internal table(note the list is not ALG LIST or GRID)
can anybody please tell me how to select multiple line items and and keep the selected items in a in a normal report list.
RegardsHii,
Have a look at this sample code
Report z_sdn.
*" Data declarations...................................................
* Work variables *
DATA:
BEGIN OF fs_spfli,
carrid LIKE spfli-carrid, " Airline Code
connid LIKE spfli-connid, " Flight Connection Number
airpfrom LIKE spfli-airpfrom, " Departure airport
airpto LIKE spfli-airpto, " Destination airport
deptime LIKE spfli-deptime, " Departure time
arrtime LIKE spfli-arrtime, " Arrival time
END OF fs_spfli,
BEGIN OF fs_sflight,
carrid LIKE sflight-carrid, " Airline Code
connid LIKE sflight-connid, " Flight Connection Number
fldate LIKE sflight-fldate, " Flight date
seatsmax LIKE sflight-seatsmax, " Maximum seats in economy class
seatsocc LIKE sflight-seatsocc, " Occupied seats in economyclass
END OF fs_sflight,
w_checkbox TYPE c, " Variable for checkbox
w_currentline TYPE i, " Variable to display current
" line
w_lines TYPE i,
w_read TYPE c .
* Internal Table to hold flight schedule information *
DATA:
t_spfli LIKE
TABLE OF
fs_spfli.
* Internal Table to hold flight information *
DATA:
t_sflight LIKE
TABLE OF
fs_sflight,
t_sflight1 LIKE t_sflight.
* START-OF-SELECTION Event *
START-OF-SELECTION.
PERFORM get_data_spfli.
* END-OF-SELECTION Event *
END-OF-SELECTION.
SET PF-STATUS 'MENU'.
PERFORM display_data_spfli.
* TOP-OF-PAGE Event *
TOP-OF-PAGE.
PERFORM header_table_spfli.
* AT LINE-SELECTION EVENT *
AT LINE-SELECTION.
SET PF-STATUS space.
IF sy-lsind EQ 1 AND sy-lilli GE 4.
PERFORM get_data_sflight.
PERFORM display_data_sflight.
PERFORM flag_line.
ENDIF. " IF sy-lsind EQ 1..
* AT USER-COMMAND *
AT USER-COMMAND.
IF sy-lsind EQ 1.
SET PF-STATUS space.
CASE sy-ucomm.
WHEN 'DISPLAY'.
PERFORM get_data_sflight1.
PERFORM display_data_sflight.
WHEN 'SELECTALL'.
PERFORM select_all.
PERFORM flag_line.
WHEN 'DESELECTAL'.
PERFORM deselect_all.
PERFORM flag_line.
ENDCASE. " CASE sy-ucomm
ENDIF. " IF sy-lsind EQ 1
* TOP-OF-PAGE DURING LINE-SELECTION *
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM sec_list_heading.
*& Form get_data_spfli
* This subroutine fetches the data from SPFLI
* This subroutine does not have parameters to pass
FORM get_data_spfli .
SELECT carrid " Airline Code
connid " Flight Connection Number
airpfrom " Departure airport
airpto " Destination airport
deptime " Departure time
arrtime " Arrival time
FROM spfli
INTO TABLE t_spfli.
ENDFORM. " GET_DATA_SPFLI
*& Form display_data_spfli
* This subroutine displays the data of SPFLI
* This subroutine does not have parameters to pass
FORM display_data_spfli .
LOOP AT t_spfli INTO fs_spfli.
WRITE: /02 w_checkbox AS CHECKBOX,
05 w_read,
fs_spfli-carrid UNDER text-001,
fs_spfli-connid UNDER text-002,
fs_spfli-airpfrom UNDER text-003,
fs_spfli-airpto UNDER text-004,
fs_spfli-deptime UNDER text-005,
fs_spfli-arrtime UNDER text-006.
HIDE:
fs_spfli-carrid,
fs_spfli-connid.
ENDLOOP. " LOOP AT t_spfli..
ENDFORM. " DISPLAY_DATA_SPFLI
*& Form header_table_spfli
* This subroutine diplays the headings of table spfli
* This subroutine does not have parameters to pass
FORM header_table_spfli .
WRITE: /10 text-001 COLOR 4,
25 text-002 COLOR 4,
40 text-003 COLOR 4,
55 text-004 COLOR 4,
70 text-005 COLOR 4,
85 text-006 COLOR 4.
ENDFORM. " HEADER_TABLE
*& Form get_data_sflight
* This subroutine fetches the data from SFLIGHT
* This subroutine does not have interface parameters to pass
FORM get_data_sflight .
SELECT carrid " Airline Code
connid " Flight Connection Number
fldate " Flight date
seatsmax " Maximum seats in economy class
seatsocc " Occupied seats in economyclass
FROM sflight
INTO TABLE t_sflight
WHERE carrid EQ fs_spfli-carrid
AND connid EQ fs_spfli-connid.
ENDFORM. " GET_DATA_SFLIGHT
*& Form display_data_sflight
* This subroutine displays the SFLIGHT data
* This subroutine does not have interface parameters to pass
FORM display_data_sflight .
LOOP AT t_sflight INTO fs_sflight.
WRITE: / fs_sflight-carrid UNDER text-001,
fs_sflight-connid UNDER text-002,
fs_sflight-fldate UNDER text-007,
fs_sflight-seatsmax UNDER text-008 LEFT-JUSTIFIED,
fs_sflight-seatsocc UNDER text-009 LEFT-JUSTIFIED.
ENDLOOP.
CLEAR: fs_sflight.
ENDFORM. " DISPLAY_DATA_sflight
*& Form sec_list_heading
* This subroutine diplays the headings of table spfli
* This subroutine does not have interface parameters to pass
FORM sec_list_heading .
WRITE: /2 text-001 COLOR 4,
15 text-002 COLOR 4,
33 text-007 COLOR 4,
45 text-008 COLOR 4,
60 text-009 COLOR 4.
ENDFORM. " SEC_LIST_HEADING
*& Form get_data_sflight1
* This subroutine displays the data from SFLIGHT according to checkbox
* clicked.
* This subroutine does not have interface parameters to pass
FORM get_data_sflight1 .
DATA:
lw_checkbox TYPE c.
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
w_currentline = 3 + sy-index.
CLEAR:
w_checkbox,
fs_spfli.
READ LINE w_currentline FIELD VALUE
w_checkbox INTO lw_checkbox
fs_spfli-carrid INTO fs_spfli-carrid
fs_spfli-connid INTO fs_spfli-connid.
IF sy-subrc EQ 0.
IF lw_checkbox EQ 'X'.
SELECT carrid " Airline Code
connid " Flight Connection Number
fldate " Flight Date
seatsmax " Max Seats
seatsocc " Occupied Seats
FROM sflight
INTO TABLE t_sflight1
WHERE carrid EQ fs_spfli-carrid
AND connid EQ fs_spfli-connid.
IF sy-subrc EQ 0.
APPEND LINES OF t_sflight1 TO t_sflight.
ENDIF. " IF sy-subrc EQ 0.
ENDIF. " IF lw_checkbox EQ 'X'
ENDIF. " IF sy-subrc EQ 0.
ENDDO. " DO w_lines TIMES
ENDFORM. " GET_DATA_SFLIGHT1
*& Form select_all
* This subroutine selects all the records of SPFLI
* This subroutine does not have interface parameters to pass
FORM select_all .
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
w_currentline = sy-index + 3.
READ LINE w_currentline FIELD VALUE
w_checkbox INTO w_checkbox.
IF sy-subrc = 0.
MODIFY LINE w_currentline FIELD VALUE
w_checkbox FROM 'X'.
ENDIF. " IF sy-subrc = 0.
ENDDO. " DO lw_line TIMES.
ENDFORM. " SELECT_ALL
*& Form deselect_all
* This subroutine deselects all the records of SPFLI
* This subroutine does not have interface parameters to pass
FORM deselect_all .
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
w_currentline = sy-index + 3.
READ LINE w_currentline FIELD VALUE
w_checkbox INTO w_checkbox.
IF sy-subrc = 0.
MODIFY LINE w_currentline FIELD VALUE
w_checkbox FROM ' '.
ENDIF. " IF sy-subrc = 0.
ENDDO. " DO lw_line TIMES.
ENDFORM. " DESELECT_ALL
*& Form flag_line
* This subroutine flags the line which has been read
* This subroutine does not have interface parameters to pass
FORM flag_line .
DESCRIBE TABLE t_spfli LINES w_lines.
DO w_lines TIMES.
w_checkbox = 'X'.
READ LINE sy-lilli FIELD VALUE
w_read INTO w_read
w_checkbox INTO w_checkbox.
IF sy-subrc EQ 0.
MODIFY CURRENT LINE
FIELD FORMAT w_checkbox INPUT OFF
FIELD VALUE w_read FROM '*'.
ENDIF. " IF sy-subrc EQ 0
ENDDO. " DO w_lines TIMES
ENDFORM. " FLAG_LINE
Regards
Abhijeet -
Multiple line selection in BPS web layout
Hello experts
I know there is a "row/column" option for layout in WIB, but it only provides the "radiobutton" but not "checkbox", hence I only can select single line in the layout but not the multiple lines.
anybody has idea to solve the problem?
Thanks PatrickPatrick, it's quite difficult to explain it, if you are not familiar with BSP
I can show only direction for you in such case, because whole implementation is quite hard and depends of you requirements.
In short, you should generate your application in WIB with "Generate class" set true and keep "Name of generated class" filled.
Then, you should go to se80, select BSP appication, enter name of your application, then, you will have layout2.htm in Views. This page implements web-layout. You should change HTML and ABAP coding for this page to put checkboxes and write some code to implement your business logic. -
Production order from sales order with multiple line item(for one material)
Dear Gurus,
I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
(Here for one material, multiple line item is required for some specific reason)
Regards
Rajib PathakHi,
This is not possible.
In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
Regards,
V. Suresh -
How to implement line selectability for a table control using table Wizard?
Hello SDN Community,
I have created a table control using the Table Wizard. I found my exact question in this forum, but unfortunately it had not been andsered. While I cannot paste a screen-print into this plane-text area, here are the steps I followed...
1) SE51
2) Create new screen 0100
3) Click Layout button
4) Clidk Table Control (with Wizard) and draw box on canvas.
5) Step is "Start" - click Continue
6) Step is "Name of Table Control" - provided name
7) Step is "Table Name" - provided name of dictionary table (AUFK)
8) Step is "Definition of Columns" - selected order numver and order text
9) Step is "Table Control Attributes" - Line Selectability is in display mode - cannot set it.
I would like to have a selectability column for my table. Would appreciate any insight into how to do this.
Thank you,
Dean Atteberry.This is a puzzling...
For the table control wizard, in the Table Control Attributes step, I was able to get line selectability to open up by declaring a char01 data element at the beginning of my type.
The puzzling is in regards to the "Selection col. fld" entry field.
If I leave it blank and try to go to the next step, I get message "Enter the name of the selection column if you are using a program table"
So it looked like it wanted to know the name of my selection column. So I type in "CHAR1". and got the message "The field "CHAR1" for the selection column is already contained in the table."
Hmmmmm.... don't understand............
Dean Atteberry. -
Multiple keystrokes selection for a JComboBox in JTable
Has anyone used multiple keystrokes selection in a JComboBox inside JTable before? I can get it done outside JTable by using: http://javaalmanac.com/egs/javax.swing/combobox_CbMultiKey.html
Looks like JTable has all kinds of problems to support JComboBox.
Suggestions?
Thanks,
JamesIf I read you right, you want to use a multiple keystroke combo box as an editor in a JTable?
If you create the JComboBox as you would like it and then install it as an editor in the column(s) JTable the editor will work like the JComboBox
Example:
//- you would have that keyselection Manager class
// This key selection manager will handle selections based on multiple keys.
class MyKeySelectionManager implements JComboBox.KeySelectionManager { .... };
//- Create the JComboBox with the multiple keystroke ability
//- Create a read-only combobox
String[] items = {"Ant", "Ape", "Bat", "Boa", "Cat", "Cow"};
JComboBox cboBox = new JComboBox(items);
// Install the custom key selection manager
cboBox.setKeySelectionManager(new MyKeySelectionManager());
//- combo box editor for the JTable
DefaultCellEditor cboBoxCellEditor = new DefaultCellEditor(cboBox);
//- set the editor to the specified COlumn in the JTable - for example the first column (0)
tcm.getColumn(0).setCellEditor(cboBoxCellEditor); Finally, it may be necessary to to put a KeyPressed listener for the Tab key, and if you enter the column that has the JComboBox:
1) start the editting
table.editCellAt(row, col);2) get the editor component and cast it into a JComboBox (in this case)
Component comp = table.getEditorComponent();
JComboBox cboComp = (JComboBox) comp;3) give this compent the foucus to do its deed
cboComp.requestFocus();Hope this helps!
dd -
I am using CL_SALV_TABLE (List_Display = X) to create a ALV report. I am willing to change it to function module REUSE_ALV_LIST_DISPLAY if it serves my requirement.
The header for the report needs to be multiple lines (8 lines). How can I accomplish this?
I looked into the possibility of using TOP_OF_PAGE event but I will have to hard code the vertical positions of the headers and since it is ALV and you can remove columns at will, I dont think this solution will work. Also if the columns are optimized or output length changed by the user, the positioning of the headers will be ruined.
Currently the header can only be of one line, how can we make the header to display a table of contents.
H1-L1 H2-L1 H3-L1
H1-L2 H2-L2 H3-L2
H1-L3 H2-L3 H3-L3
H1-L4 H2-L4 H3-L4
H1-L5 H2-L5 H3-L5
H1-L6 H2-L6 H3-L6
H1-L7 H2-L7 H3-L7
H1-L8 H2-L8 H3-L8
Thank you.Please guide me hw to put internal table field at report header in ALV.
this is my field catalog.
wa_fieldcat-row_pos = 1.
wa_fieldcat-col_pos = 1.
wa_fieldcat-tabname = 'ITAB'.
wa_fieldcat-fieldname = 'VBELN'.
wa_fieldcat-seltext_m = 'SalesOrderNo'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Also i wnt to total 4 field at header level and other is detail level.
Please guide me hw to do.
thnks
Bhavesh -
AT LINE SELECTION FOR STANDARD CLASSES
hi...im developing a report in which i used CL_DOPR_WRITER class to create a table..how can i write AT LINE SELECTION EVENT for this class.
follow this in your code:
AT LINE-SELECTION.
PERFORM F1.
<<<<f1
form f1.
if you want to call any static attribute or method just do
CL_DOPR_WRITER=>method or parameter
but if you want to access pubic method or att
ref type refrence of CL_DOPR_WRITER
call method ref->your method
endform. -
How do I find an event which is triggered on line selection for ALV grid?
Hi,
I'm trying to find an event which is triggered when a user selects a row in the ALV grid. I want to add my own code in to add up the total values of selected lines, but can't find any event which will trigger my method.
I found CLICK_ROW_COL but it's protected so when I try and add a method for it:
PROTECTED SECTION.
METHODS:
select_row
FOR EVENT click_row_col OF cl_gui_alv_grid.
I get the syntax error:
Access to protected event "CLICK_ROW_COL" is not allowed.
Am I using the right event? Am I implementing it correctly?
Any help appreciated. Thanks in advance.
GillI chose to solve this by removing the line select buttons from the ALV and replacing them with a checkbox defined as a hotspot. I then used EVENT hotspot_click FROM cl_gui_alv_grid to highlight the line and change my totals on a single click.
Maybe you are looking for
-
When I try to open a link on any page/website Firefox does not open the link. It doesn't even "work" at opening the link, it just sits idling. I have to right click and choose "open link in new tab/window" in order for Firefox to open the link. It do
-
Acrobat 10: We cannot search for words containing French accents.
For example, if we copy a word like "Transporté" and paste it in the search field in Acrobat (Reader, Standard and Pro), it appears "transport´e" and the search fails.
-
Lightbox gallery not working right...
I inserted a lightbox gallery from the adobe exchange website. For some reason when you click on the thumbnail it doesn't open as it should. Can anyone see what the problem is? What it should look like: http://www.tecnorama.org/demos/lightbox.html Wh
-
No Boot! CRASH?? Chime but nothing more
Powerbook G4 17" 1.67ghz, 1G RAM I had to cold shutdown and when I restarted I heard the Chime like normal and the screen lit up with the off white like normal but nothing happened after that...it was stuck there. I listened and could hear clicking a
-
"scratches" on graphics and strange drop shadow
I am using Indesign CS3 on Windows XP. I am making an entry form for a bike race. There are 4 photos on the cover - all the same odd shape - a rounded lumpy shape. All have the same drop shadow. I can't understand why one of the drop-shadows is diffe