Multiple Links' Content Displayed on Single Page

I don't really know what this is called
I have a set of 4 different links to web pages that I want to have displayed on one page. I do not want the users to have to click on each of the links to see the content. I just want the main page to have the content of the 4 links appear on the same page so they have no clue that there are different links.
How do I do that? I have been searching everywhere for an answer. Your help is very much appreciated.

I'm not really sure what this is called and that's why I can't Google or search for what I want. I'm looking through books and I'm not finding what I'm looking for either. Sorry for being so ignorant
I'm going to try and show you what I'm looking for:
Current Weather
links to:
www.weather.com
(but it's actually another
weather page)
displays:
20 degrees /snow and cold
Company News
links to:
http://company/intranet.htm
displays:
my company's news (which updates every few seconds)
Cafeteria Menu
links to:
http://company/intranet/cafe.htm
displays:
menu for week
Conference Room Schedule
links to: http://company/intranet/sched.htm
displays: what's happening in what rooms
So you see I want these links to the pages to actually display in a table-like format. I do not want the users to have to click on them. It's like I want them in different sections but the links imported or overlayed in the page. Does that help any?
-Kelly

Similar Messages

How do you print multiple different images on a single page in preview

How do you print multiple different images on a single page in preview?

Chances are no one who saw your question knew the answer.
Unless you're willing to share the answer you found here, then anyone else like you searching for the problem who comes across this thread will also be unable to thank you for providing the answer too.

Adobe acrobat pro x change the program's default page display to single page view - Windows 8, HP La

adobe acrobat pro x change the program's default page display to single page view - Windows 8, HP Laptop

Since there were no answers, I will take a stab at a reponse. For the 2nd method, I suspect you could simply select the print or press job options to get the desired results or turn off "use local fonts" in Acrobat. If you check the font list, the fonts are probably not embedded and that is likely the problem.
I noticed that you have both Reader and Acrobat installed and that might cause some conflict, but should not be the issue here. If you were to uninstall Reader, you would have to repair Acrobat. The conflict here is that you might have problems with the one opening when you want the other. If it works for you, then don't worry about it.
For technique 1, I suspect you may be using IE 9 that has apparently been a problem since it came out. I have refused to install it. However, it may simply be that PDF Maker does not work correctly with your browser, or got deactivated and needs to be allowed to run in your browser (IE I am assuming).

Sharepoint 2013 - Search for link names on a single page

Hi
I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
Is this possible?

Hi,
Yes, you can format the search results as you expected. But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
Once display template created you have to map the display template to your search results web part.
Please refer to the following articles.
SharePoint 2013 Customize Display Template for Content By Search Web
Part (CSWP) Part-1
Introduction to SharePoint 2013 Display Templates
Display Template Overview
Please mark it answered, if your problem resolved.

How can I make some pages in a PDF display in single-page view and others in two-page (facing) view?

Exactly as it says on the tin. I am looking to save a PDF magazine/book layout in such a way so that when opened, only the front and back covers open to the viewer in single-page mode, and the rest of the pages in two-page facing mode, without re-printing the in-between pages in booklet format and re-inserting them into a new PDF (with the front and back covers left separate and untouched, and included as single portrait-orientation pages). This is so that individual pages can still be printed (on a physical printer, not a "virtual" one like a PDF driver), as-is without having the page next to it included, or the printouts always requiring landscape orientation (resulting with two "pages" from the PDF showing up on one sheet of paper).
So when the PDF is opened, I want just the front and back cover to be auto-viewed by themselves, and the content (the "meat" of the document) viewed side-by-side, as though one were actually reading a "book" -- but without actually re-doing the content pages to be "fused" side-by-side. Thus creating the "illusion" that they are, in fact, in booklet form. Is this possible, to have different page-display settings for different pages/page ranges in a single PDF? If so, how is this done? If not, what would be my best course of action otherwise to achieve this "virtual" book layout, while still retaining the "physical" structure of the document and allowing individual pages to be printed by themselves rather than "fused" together?
Using Acrobat X Pro on Windows 7 Pro SP1.

Dave Merchant wrote:
The best you can do practicably is the 'two up with cover page' view mode. The first page will appear singly but not centered, and to get the last page to behave it would have to be a folio sheet.
It's theoretically possible to use JavaScript to reset the view mode as each page is changed, but it makes for a nightmare of usability (what if someone on a smaller display wants to use 'fit to width'? Not an option if JS keeps overruling it). Anything involving JS won't work on non-Adobe software or mobile devices.
Not a programmer by any means, so I won't be using JavaScript because I wouldn't know where to begin. I was thinking more in terms of an option I could adjust in the menus or dialogues.

Multiple f:view on a single page?

Is it possible to have multiple f:view s on a single page? I want to have some parts of the page be displayed always in a specific language: f:view locale="de". Some other parts should just change the locale normally?
i tried it, but then the page was pretty corrupted... although I did not get an error message.
thanx!

No, you can only have one <f:view> per JSP page (including any pages that page includes), and the locale must be the same for the complete response (because it's also used when the post-back request is parsed).
It's hard to say from your description if this makes sense or not, but why don't you use static text for the part that is always in German, and only localize the parts of the page that needs it?
Hans Bergsten (EG member)

Require LOV's should be displayed on single page for Webi Rich Client -R3.0

Hi all,
Is there any way to display the list of values in a single page when we apply a quick report level filter in Web intelligence Rich client report.
Behavior:
When we have large list of values for an object then the list of values are displayed in pages......
We can avoid the pages in Webi by making changes to the 'List of value batch size' from 1000 to 10000.
Is there any setting for displaying the list of values for Web Intelligence rich client ?
Please advise....

Hi,
I have checked the view source code. It is having correct details
for eg..
SAP Integrated ITS, WebAS: C11, workprocess: 0
All rights reserved.
Creation time: Thu Dec 03 11:10:16 2009
Charset: utf-8
Template: bbpstart/99/bbpglobal_800.html -->

I published the Template again for BBPGLOBAL.
Only page cannot be displayed is coming.
There is some link missing between the SRM server and the ITS.
Can you figure out what it is ? We are stuck
Regards
G.Ganesh Kumar

Printing multiple Payment documents on a single page

Hi All,
I am using a standard Program RFFOD__V to print the payment documents.When I execute the program with the provided variant, the output of this program creates spool request for Payment Advice . When I see the output of the spool request it prints 50 payment documents on 50 pages(One document per page).
The requirement is that the client wants to print 3 documents on a single page hence it will reduce the amount of pages in the printout.
Please suggest how can we do it. The Script attached to this standards program is a customized script.Do I need to copy the standard program and make changes to it or Can I achieve it only by changing the script ?
Can we achieve it thorough customization,if not , then please suggets how can I achieve the desired functionality.
Earliest reply would be appreciated.
Thanks
Manish

That's one of those things that is just easier in some other programs. In ID you have to do your own n-up page.
You can reduce the overhead, though, but making your label 1-up to start and saving that. For the n-up page place the original ID file, then use step and repeat to make a grid of linked-file labels. Now there's only one file you have to worry about updating -- the single instance. The n-up file will ask you to update the link the next time you need to print.
You still need two files for each label, but you only need to work in the second one once.
Peter

Multiple SharePoint PerformancePoint Dashboard in Single Page?

Hi,
Actually my requirement is, I have two dashboards each have the respective pages. I could deploy either one dashboard only at a time. I could not deploy two dashboards in single page.
But i want to deploy two dashboards in same page. By the way user could see two dashboards and navigate to the respective pages in single page.
Because i want to categorize the pages so i would create two separate dashboard.
Thanks & Regards
Poomani Sankaran

Dashboards are the containers that you use to display your scorecards and reports. When you assemble dashboards, you add reports, scorecards, and filters to zones, which are sections in a dashboard page.
A single dashboard can contain more than one page. You can design each page by using the same page layout template, or you can use different templates. You can also customize the sizes of the dashboard zones, and each zone can contain one or more items, such
as reports, scorecards, and filters.
Refer - http://office.microsoft.com/sq-al/dashboard-designer-help/getting-acquainted-with-performancepoint-dashboard-designer-HA010369185.aspx
Thanks, Ashish | Please mark a post helpful/answer if it is helpful or answer your query.

Multiple web content overlays on a page

I'm using Edge to make some vector animations--3 separate infographics--in my DPS publication. I'm placing them all on one single page, but only the first animation that is tapped by the user "plays" all the way through like it should. That is, once I tap and successfully play one animation, I try a second animation, but it loads but doesn't play.
Is there some limitation on the number of web overlays--or HTML5 animations--that can be on a page?
For background on my workflow, my organization doesn't yet have a DPS subscription. We are simply building folios with CS6 and testing with our accounts on the iPad with the newest Viewer (23).
thanks,
Scott

We are having the same problem here. It's seems to be related with the iOS 6 update. We have two iPads, one with the updated software (iOS 6) and the other without it (iOS 5). Both of these have been updated with the new Adobe Content Viewer. The one with the old iOS works perfectly (HTML, Edge Animation, Videos) but the other with the most-up-to-date software does not. The HTML doesn't play and some times plays it once. We even tried by adding it to the HTMLResource folder to be trigger by a button to open a new window by itself, but no joy. Again we don’t have any of these problems on the iPad without the current software update. They all work perfectly
Please advise since most users have upgraded their iPads and iPhones.
Thanks,
Daniel Rodriguez

Can ibook display a single page on the screen?

To my understanding, ibook displays two pages at a time on the display on an iPad. Does it have the ability to display just a single page on the screen with nothing fancy (just a flat sheet) ? I was thinking of ePub powerpoint slides and I should like to display them just as a single slide or page.
Thank You,
G

Yes, you can view a single page in iBooks on your iPad screen. Put the iPad in Portrait, not landscape and voila, you'll have a single page view.

Multiple pay slips in a single page

Dear Experts,
We have a requirement to print two payslips in a single A4 paper, This because the payslip which is being printed takes only a half of the A4 paper, The client doesn't what to waste the paper because the number of employees is huge.
So they want two payslips in a single page.
Can u please let me know how to achieve this.
Thanks In Advance..
Reena......

Hi,
Check for the code for Printing Lables so the same process can help you ....
Regards,
Vijaya Lakshmi.T

How to print multiple identical-copies in one single page?

Hi all,
I need to print several copies of the same image in one single page. I've tried the following:
- selecting the layout 4-pages in one.
- printing 4 copies.
However, this produce 4 physical pages, with the miniaturized image.
No way to get 4 copies of the same image in the same page.
Very thanks in advance,
Jonatan

jonatanc, welcome to Apple Discussions.
Is the "image" you wish to print a picture image like a .jpg?
I do this many times when I want to print 4 images on letter size photo paper. I use Photoshop Elements, but you could probably use most any graphic application.
I do a Select All & Copy of the image. Then open a new file with a letter size. I then paste the image on the page 4 times & move the image towards the 4 corners of the page. Then print.
 Cheers, Tom

Why does Muse CC 2014.3 create multiple style sheets for a single page site?

Hello,
My Master page is empty and never opened. My single page has NO MENU option selected.
How can I avoid this or fix it?
thanks for any help or advice, droid

Muse puts all the CSS that's common across all the pages of your site in one .css file and all the CSS that's unique to a given page into a separate .css file for that page.
At this time Muse does not special case the single page site situation and there's no option to merge the two CSS files or inline the CSS into the .html file.
I am curious what your primary concern(s) is regarding having two .css files?

How to catch and display a link content in another portlet page?

Can you tell me how to display a URL content into next page after an user click s on this link? I am developing a JSR 168 portlet under a Portal. I have 3 pages so far in my portlet. view.jsp, view2.jsp and IpByHourPage.jsp. view2.jsp displays a lis of IP address. When an user clicks on an IP in view2.jsp, it goes to IpByHourPage.jsp. How to catch the IP address such as 123.23.89.21 that an user just click displayed in IpByHourPage.jsp. I don't know why I got null value returned.
Also, I don't know how to do a "go back to previous page". I want to go back to view2.jsp from IpbyHourPage.jsp
Here is my code
in view2.jsp
<portlet:renderURL var="aURL">
<portlet:param name="goto" value="IpByHourPage"/>
</portlet:renderURL>
<a href="<%=aURL.toString() %> "><%=MyIP%></a>
in IpByHourPage.jsp
<%
String MyIPHour = request.getParameter("goto");
%>
<h1>IP Report by Hour ( <%=MyIPHour%> )</h1>
<portlet:renderURL var="Ret_IPByHour">
<portlet:param name="Ret_IPHourPage" value="Ret_IPByHourPage"/>
</portlet:renderURL>
<center> <a href="<%=Ret_IPByHour.toString() %> "><b>Choose Another IP</b></a></center>
in my .java file
protected void doView(RenderRequest request, RenderResponse response)
throws PortletException, IOException, UnavailableException {
response.setContentType("text/html");
String MyBegDate = request.getParameter("BegDate");
String MyEndDate = request.getParameter("EndDate");
String MyNetworks = request.getParameter("networks");
String MyYourName = request.getParameter("yourname");
PortletURL renderURL = response.createRenderURL();
renderURL.setPortletMode(PortletMode.VIEW);
request.setAttribute("renderURL", renderURL.toString() )
String GotoRenderAction = request.getParameter("goto");
String MyIPHourAction = request.getParameter("Ret_IPHourPage");
if ( (MyIPHourAction!=null) && MyIPHourAction.equals("Ret_IPByHourPage") )
PortletRequestDispatcher kk = getPortletContext().getRequestDispatcher("/view2.jsp");
kk.include(request, response);
if (MyIPHourAction != null && MyIPHourAction.equals("Ret_IPByHourPage"))
PortletRequestDispatcher mm = getPortletContext().getRequestDispatcher("/view2.jsp");
mm.include(request, response);
if (GotoRenderAction != null && GotoRenderAction.equals("IpByHourPage"))
request.setAttribute("BegDate", "MyBegDate");
request.setAttribute("EndDate", "MyEndDate");
System.out.println("BegDate" + MyBegDate);
System.out.println("Endate" + MyEndDate);
PortletRequestDispatcher mm = getPortletContext().getRequestDispatcher("/IpByHourPage.jsp");
mm.include(request, response);
if(MyEndDate!= null )
PortletRequestDispatcher prd = getPortletContext().getRequestDispatcher("/view2.jsp");
prd.include(request, response);
else if (MyEndDate==null && GotoRenderAction == null)
PortletRequestDispatcher prd = getPortletContext().getRequestDispatcher("/view.jsp");
prd.include(request, response);
The problem for above code is the clicked single IP can not be displayed in IpByHourPage.jsp. and I cannot go back to view2.jsp from IpByHourPage.jsp. when I click "Choose Another IP"
I find out that the MyBegDate and MyEndDate values are all null when I click Choose Another IP link. I got the following error message
Caused by: javax.servlet.ServletException: Unparseable date: "null null"
     at org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:858)
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:791)
     at org.apache.jsp.view2_jsp._jspService(view2_jsp.java:651)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
How to fix above problems. Thanks

I think the problems are related to portletsession. But I don't know how to use it. How to put portletsession into doview method or my jsp pages. Can anyone tell me in my code? Thanks a lot.

Multiple Links' Content Displayed on Single Page

Similar Messages

Maybe you are looking for