Multiple listings for one shared user

Occassionally, a single user in my office will show up under the Shared Music heading in the iTunes source list multiple times! One coworker's shared library currently shows up 6 times, one after the other!
Only the last listing actually connects to her library, the preceeding 5 listings all return the error: "The shared music library is not accessible for an unknown reason. (-3259). Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689."
I know this isn't the problem though.
Other users on our network have had similar problems but the 6 listings is the worst to date. We are all on OSX 10.3.9 using iTunes 6.0.4 (3) however, this problem has been happening since iTunes 5. Anyone have any solutions on how to get back down to a single listing?
G5 Dual 1.8GHz   Mac OS X (10.3.9)   iTunes 6.0.4

Create a playlist
Put all affected tracks into it
Select all tracks on that list
Press Apple-I on your keyboard
Enter the correct name as "Artist"
Press 'OK'

Similar Messages

  • Multiple listings for one artist on iPod

    What, if there is one, the easiest way to consolidate all of one artist's music into one group for that artist.I noticed that whenever I scroll through my artist list on my iPod it will show up to six names for one artist when that is the only artist on each album...I've tried listing the name in the sort album and sort artist but it still seems not to change anything.

    Create a playlist
    Put all affected tracks into it
    Select all tracks on that list
    Press Apple-I on your keyboard
    Enter the correct name as "Artist"
    Press 'OK'

  • How to open multiple sessions for one user?

    Sorry for the silly question but I couldn't find it googling or searching through this forum, so I started wondering whether it's possible in SQL Developer to open multiple sessions for one user. I'm fairly new to SQL Developer and databases in general.
    When I open SQL Developer and connect to a schema, a worksheet opens named MYSCHEMA. If I disconnect then connect, another worksheet opens, named MYSCHEMA~1. I assumed these were different sessions, but if I enter into one worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 1
    update my_table set col1 = 0 where row_id = 1
    select col1 from my_table where row_id = 1
    -- shows result is 0and then enter into the second worksheet:
    select col1 from my_table where row_id = 1
    -- shows result is 0I would have expected the second worksheet to report 1 because the first worksheet did not issue a COMMIT. Thus, I'd guess both worksheets are the same session? Is that right? If so, how do I have two sessions open simultaneously (opened by same user)?
    I'm trying to implement the code at the bottom of this post, for which testing requires at least two sessions:
    Re: Help with Procedure
    Edited by: tem on Apr 18, 2012 6:44 AM

    Thanks Jim,
    Ctrl-Shift-N doesn't do anything for me. I'm on a mac -- by experimenting it looks like command-N does what you're looking for. This appears to be the same as left-clicking on the "New" icon in the top left corner of SQL Developer, or selecting from the pull-down menu, File > New.
    This opens "Create a New" window that appears to be a wizard. What would I select at this point? Options are: Database Connection, Table, View, Package, ...
    I don't see an option for "Worksheet".
    UPDATE:
    OK, I found that if I select "SQL File", a worksheet becomes available. Perhaps this is what you intended. However, when I issue the command
    select col1 from my_table where row_id = 1;it still returns 0 instead of 1. Hmm, maybe my initial assumption was wrong -- if this is a second (e.g. different) session, should I expect the changes made in the first session in SQL Developer (the UPDATE command) WITHOUT a commit, to be observed in this second session? I thought that changes made in one session were not viewable in a different session until these changes are committed in the first session? If so, how to show this in SQL Developer? I must be missing something basic here.
    Or, is SQL Developer issuing some sort of "auto-commit" without my knowledge?
    Edited by: tem on Apr 18, 2012 8:00 AM

  • Multiple listings for Shared Music

    I have 2 users on an iMac both sharing their music library.
    Both users appear several times in each others "Shared Music" list. It seems that every time the computer is put to sleep and then woken up again the user is added to the "Shared Music" again, so I end up with around 10 listings for the same user.
    Only solution so far is quitting iTunes.
    Any suggestions what might cause this? (iTunes 6.0.5. on 10.4.7)
      Mac OS X (10.4.7)  

    Not having that problem with 3.0 on my Touch (2G). Did you check the Album Artist field to make sure they're consistent for all albums by the artist? How about Disk number and Number of Disks?

  • Multiple position for one central person and one user

    Dear Guru's,
    I have a requirement to create multiple position for a existing User - which already has CP Central Person and S Position.
    How to create this new position and assign the same CP to all the new positions ?
    Thanks and regards,
    Anil Rajpal

    Hi
    Yes you can definitely do this
    Create the new position and assign the CP to this position in transaction PPOME. You may find the position first there in PPOME, and then drag-drop the CP over the position to make the assignment. System will ask the percentage of responsibility.......which you will ve to enter...
    Regards
    Virender Singh

  • How can I combine multiple listings for same genre on iTunes 11?

    When I downloaded the newest iTunes version 11, I suddenly had multiple listings for the same genre. I literally have 63 genre listings for "Trance"; 4 listings for "Hip-Hop/Rap" and a few others. There was obviously not a problem with the old iTunes version as they were all grouped together. I do get music from several sources but I have no idea how to combine all my "Trance" listings into one. It takes longer to scroll through the "Trance" genres than the rest of my genres combined. I tried to individually change one the "Hip-Hop/Rap" listings by using the "Get Info" tab and typing in the genre until iTunes can autofill the rest but the problem remains. Any ideas how to combine all these into one genre without compromising the genre name? Thanks
    Mac OS X Version 10.6.8 Snow Leopard

    I believe the closest you can come is look at your songs in Songs.  There you can sort by albums.
    The album view does not contain a list view any longer.

  • Multiple choose for one parameter

    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by whl:
    Hi, does Oracle Report support the multiple choose for one parameter? i used a IN statement inside my WHERE conditions as following
    Select ....
    where ....
    content.style IN (:p_style)
    (content.style is a column in table "content", and "p_style" is a bind variable)
    i want user can have multiple choises on p_style value. but in the parameter form i only can make one choise. Does any one know how to do the multi choise from parameter form? if you do, please help me. Thank you very much.
    Li<HR></BLOCKQUOTE>
    you can do that by flowing the stap
    at first you will write a select statement
    select ...
    From ...
    where Style (colomn name) = &style1
    then you create a user parameter soupose wich name is P_style and which valus is x, y, and z you should enter another value soupose that name is 'All' (All means x + y + Z)
    then you write in after parameter form trigger...
    IF :P_style = 'All' then
    :style1 := null;
    Else :style1 := 'and style (style means your column name) = :P_style;
    end if;
    null

  • Why is Apple TV showing the same computer multiple times for Home Sharing?

    Why is my Apple TV showing the same computer multiple times for Home Sharing? Also have connectivity issues. Sometimes will lose signal.
    JonRod's music
    JonRod's music
    JonRod's music
    JonRod's music
    JonRod's music
    I recently updated to Yosemite and never had this issue before.

    I'm not 100% sure of the ins and outs, but it's some sort of known issue between Yosemite, Airport and wifi. All you can do is wait for a fix and keep restarting your equipment as and when needed, unless you have the ability to connect your Mac via ethernet.

  • How do i scan multiple pages for one attachment

    I know how to scan but I don't know how to scan multiple pages for one attachement....Help please

    Hi dagda24,
    You can scan multiple pages into a single document with the scan to PDF option.  Use the following steps to do so:
    1.  Open MP Navigator.
    2.  Click One Clcik.
    3.  Click Save to PC.
    4.  Change the File Type from PDF to PDF (multiple pages).
    5.  Make any other changes as needed, then click scan.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Multiple Values For one Condition in Choose From List

    I have used one Business Partner Choose From List in my form but i want to give condition in that choose from list on GroupCode .But the condition will have multiple values like 100,102,104 then how i will write the code to incorporate multiple values for one single condition.

    Hi,
    Check this thread
    How to set a Multiple condition in a single CFL
    Hope that helps,
    Vasu Natari.

  • Multiple Labels for One Order

    Can anybody tell me if it is possible to produce multiple labels for one order. For example a customer orders 4 units. A standard package holds 3 units so an additional package is required for the fourth unit. As a result two packing labels are required. Does OM 11i support this?

    Hi Aj
    Thanks for your quick response. I was think on the same lines and you have confirmed that we will have to split the line into several lines on sales order.
    I am trying to do that now in our ECC box i.e item 10 with payer 1 and item 2 with payer 2. But as soon as I try to change the payer on item 2, i get the following error message which relates to credit management being active.
    I am assuming once we decativate CM, we should be good to go. PLease confirm. Also once its time for billing, will SAP automatically split the billing into different invoices per sales order line item based upon number of payers on the line items?
    PLease confirm your thoughts.
    Regards
    Jai

  • Multiple currency for one vendor

    Hi,
    Is there any way to have multiple currency for one Vendor?

    Hi Siva,
    Yes, It is possible to maintain multiple currency for one vendor. How ? The procedure as follows.
    During vendor creation using T-code XK01 and currency enter input data screen select Extra option on the top of the screen click and display  'Add Purchasing Data'  option click opened new screen and give input data plant, tick mark of the option Data retent.at plant level allowed and tick for OK.
    After that, you have enter multiple currency for the same vendor during vendor creation time, then you will create PO using T-code ME21N the currency field you have fill as you required currency by default first currency of vendor created will be display.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Multiple Vendors for one Document Number in BW

    Hello All,
    We are getting Multiple Vendors for one document in BW. In R/3, standard table and RSA3, we are able to see correct vendor where as when it is coming into BW it is showing incorrect vendor in PSA and Data Target.
    All issues are coming for Process Key 1 only.
    *For Example:*
    Document: 9400000007
    Schedule Line:1
    Doc Item: 1
    Vendor:
    0010019229 - Incorrect Vendor
    0010018962 - Correct Vendor
    Committed Quantity: 0
    Doc Type:
    ZNB
    ZNPP
    Process Key: 1
    Not sure how to upload screen shot.
    Please suggest.
    Thanks,
    Vijay

    Hi ,
    Are you loading for the first time ? If yes have you checked Transaction BF11 settings.
    Regards
    Rahul Bindroo

  • Multiple payers for one sold to party

    Hi All,
    Can we have multiple payers for one sold to party?
    Thanks

    Hi
    Yes, you can have multiple PAYER for one Sold-to-party (only in the Customer master).
    This Partner relationship is maintained in two places. They are,
    > Customer master ( sales area data > partner function tab )
    > Sales documents (at Header level and Item level)
    In Customer master data, you can have multiple partners ( e.g, multiple Payers) for one Partner function( e.g, SH,BP,PY).
    But in Sales document, you can have only one Partner for one Partner function.
    So, you can have only in Customer master data multiple pertners. So, first create the different Payers through XD01 ,choosing Account group "Payer".
    Then assign all those PAYERS  in the master data of the Sold-to-party by going in the change mode XD02 and save it.
    When you create the Billing document, system will give a pop-up of those list of Payers and you have to choose one . You can have only one Payer in one Billing document.

  • Lightroom 5 slowdown, my post processing times have tripled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

    my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

    my post processing times have tripeled and the develop tasks take multiple seconds for one adjustment, Please Help. . . .

Maybe you are looking for

  • They said they refunded, yet I still haven't got the money on my account?

    A while ago (about 2 hours) a man on chat said he had refunded my money, as I bought something I didn't authorise, although I don't have the money on my account, even though he said he had. Please help! :) all the best, and a very happy new year to y

  • What are the sap scripts

    plz tell me any tutorials abt the sap scripts

  • HP printer manager suite

    I bought a HP pavillion with Vista OS and received an update to windows 7 disc recently I've had to reload my HP Officejet J6480 all in one printer and have lost the HP manager suite (software) - my orginal drivers (disc) don't cater for windows 7. a

  • Adjustment Modifications after Patch upgrade?

    Hello, Is it possible that the Modifications Adjustments (done in SPAU and SPDD and occured due to SAP_BASIS and SAP_ABA patches) be carried out after the patches upgrade? To be more clear, instead of Adjusting the Modifications while patch upgrade i

  • WMI CIM Studio dows not connect to any computer using IE 11

    Using a new download and install of WMI CIM Studio and IE 11, I cannot connect to any computer on my network. On opening in IE I get the following warning : Internet explorer restricted this webpage  from running scripts or ActiveX controls. I choose