Multiple occurence of IDOC node for certain input combination in mapping

Hi All,
My scenario is as below:
Input sturucture:
FieldA
FieldB
FieldC
FieldD
FieldX
FieldY
FieldZ
Output structure is IDOC WPUWBW01.
Now field A,B,C and D forms key of my source record. So as far as key remains same i have to post all items in one idoc. I am able to achieve this with combination of split by value Fn and collapse context Fn.
Now in addition to above if my Field B = "1200" and Field Y = "1" it should generate IDOC node twice ...
and if Field B = "1200" and Field Y = "6" it should generate IDOC node once.
Any idea how this can be achieved.
Regards,
Siddhesh S.Tawate
PS: Also let me know how to use the container and queue in UDF's

Now in addition to above if my Field B = "1200" and Field Y = "1" it should generate IDOC node twice ...
and if Field B = "1200" and Field Y = "6" it should generate IDOC node once.
duplicate the IDOC node twice so that you have three IDOC nodes in all.
For two IDOC nodes apply the condition
Field B = 1200
                    ------And ----ifWithoutElse     --------------------TargetIDOCNode
Field Y = 1                     Then(Blank Constant)
For the remaining IDOC node apply the condition:
Field B = 1200
                    ------And ----ifWithoutElse     --------------------TargetIDOCNode
Field Y = 6                     Then(Blank Constant)
You can also try using createIf function....
regards,
Abhishek.

Similar Messages

ITunes substitutes names of artists for certain letter combinations

iTunes has gotten odd--when I type in the names of artists manually, certain keystrokes give weird results which I then can't edit. I have to delete the entire name and use tricks (like inserting a space and later removing it) to get the names right.
For example, typing "Lo" results in "Lô Borges." "Ca" results in "Çà›êîâ Â." There are a few others, too.
What could be causing this? What can I do to fix it? It's quite irritating.
I am using iTunes 10.5.3.

iTunes has gotten odd--when I type in the names of artists manually, certain keystrokes give weird results which I then can't edit. I have to delete the entire name and use tricks (like inserting a space and later removing it) to get the names right.
For example, typing "Lo" results in "Lô Borges." "Ca" results in "Çà›êîâ Â." There are a few others, too.
What could be causing this? What can I do to fix it? It's quite irritating.
I am using iTunes 10.5.3.

Multiple occurence not working for extended idocs

hai friends
iam doing file to idoc senario in that multiple occurence is not working for Z segments.
it is extented idoc .
in taht multilpe segments are not creating only one segment is creating
what is the problem
pls help me
with regards
srikanth vipparla

Hi Srikanth,
You should map the node of the target side(the one which you want to occur multple times) to the node of the source side based upon which the target side node has to occur multiple times. For example lets say our source and target side structures are like this:
<Source>
              <Element1>
              <Element2>
              <Element3>
</Source>
<Target>
              <Element1>
              <Element2>
              <Element3>
</Target>
Now if you want Target to occur n times if Source node occurs n times, you should map Target node to the Source node. Even in case you want that Element1 of target side should occur as many times as many times you have Element1 of Source side, you should do the same.
Thanks and Regards,
Sanjeev.
PS: Reward points if helpful.

How to set property nodes for each of the multiple y-axes?

In Labview 6i, I have set up multiple y-axes on an xy graph. I want to change certain properties of each of the 2 y-axes independently. I believe I can do this using "property node".
However, after I have created a property node for the xy graph, I realised that there is only 1 y-axis selectable from the list of properties. How can I set the property of the other y-axis then?
Thanks for the help!

I believe there is a property called "active graph"... this allows you to
select the active graph to apply the property changes to...
Later...
meng118230 wrote in message
news:[email protected]..
> In Labview 6i, I have set up multiple y-axes on an xy graph. I want to
> change certain properties of each of the 2 y-axes independently. I
> believe I can do this using "property node".
>
> However, after I have created a property node for the xy graph, I
> realised that there is only 1 y-axis selectable from the list of
> properties. How can I set the property of the other y-axis then?
>
> Thanks for the help!

Single idoc generation for multiple sales orders

Hi,
Pls let me know how do we generate single idoc for multiple sales orders.
Its not collecting idoc. As we know we can generate an idoc for one sales order correspondingly
my requirement is to generate single idoc number for multiple sales orders.
Do we need to write a program.

Amar,
To understand take HRMD_A04 as example. Root segment has Maximum 9999999999 defined.
Segm.type E1PLOGI
Minimum number 1
Maximum number 9999999999
Parent segment
Hier.level 2
This means that this IDOC types has capability to hold multiple HR Master data objects. PFAL program creates this IDOC and it has facility to mention the Objects per process, check selection screen.
I checked for INVOICE01/02 its not possible there. Hope this clarifies.

BW 3.5 works with multiple nodes for authorizations

Hi,
Does BW 3.5 allow to do authorizations on mutiple nodes? It seems that from the How to wotk with hierarchy authorizations paper, the variable can only allow filtering 1 node. for 2.0B. We have requirements to allow viweing multiple nodes in a hierarchy.
Thanks
Will

Hi Will,
creat a hierarchy-node variable fill by authorizations in the frontend. The type has to be multiple entries (not single value). In RSSM at the hierarchy authorization creation you have to use the F4 for selecting nodes. The F4 allows to drag more nodes into the right frame.
Cheers
Peter

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

Syndicating multiple Outputs for 1 Input file

Hi SDners,
When I am syndicating records output is splitting into 2 Files for 1 Input file.
Example:- 10 records are there in Input file. While importing Import Manager Identifies 2 records as Duplicates and it will create only 8 records in MDM. While syndicating these 8 records are splitting into 2 output files. I want these 2 output files in 1 Output File.
This is not happeneing everytime, Only some times. If I process the same file agian in MDM then it will syndicate in 1 Output file only.
I configured Parameters like this:
Suppress unchanged records=Yes
Max Records per Output file=0
XML File Output=Single File (All Records)
and the PORT Map also like this
"Processing type=Automatic"
"Processing Interval=Continues".
Still I facing the Same problem.
Why it is happening only sometimes. If I configured the parametrs wrongly then it should syndicate everytime output into 2 file. But it is happening only once in a Week like that tooo 1 or 2 files only.
MDM Version I am using is : SAP MDM 5.5 AP06 (5.5.63.71). Any help ASAP.
Thanks
Kiran

Hi Kiran,
Can you check the key mappings for the records .If you have multiple key mappings maintained and you have overridden the key mapping in the remote systems property then MDM will generate identical copies for each remote key
Thanks
Vinay

Cluster Apex MS's across multiple nodes for load balancing?

Can Cluster Apex MS's across multiple nodes for load balancing? If Yes/No, any supportive doc's will be much appreciated.
Here is what I did ..........
I tried multiple MS's on different nodes for Apex Domain (clustered)
Deployed apex.war, i.war with targets pointing to cluster.
Apex listener techstack is shared filesystem $HOME/apex, where apex-config.xml and bdb are available
Anyone of the MS's whichever started up first is locking up bdb and 500 server shows up when internal workspace is being launched with host specific url, where as it works fine for the host which actually locked up bdb (first MS that was started)
2nd MS shows errors as below in log files ..
Caused By: com.sleepycat.je.EnvironmentLockedException: (JE 4.0.103)$HOME/apex/bdb The environment cannot be locked for single writer access. ENV_LOCKED: The je.lck file could not be locked. Environment is invalid and must be closed.
Its expected behavior until here .....
++++ I tried something to get it working ++++
Whilst both MS's are up and running, delete $HOME/apex/bdb but let apex-config,xml be as it is...now the internal workspace urls for both hosts work fine. I logged into host specific urls and navigated, created/edited users.,etc and it is all looking good but it did not create new bdb directory under $HOME/apex ...!!
Having said its working fine, the same issue repeats after the MS's bounce. So I did put a command line to delete bdb dir once the MS comes up to avoid the issue but really not sure if this is the right way at all?
Geek's ...awaiting your advice!!

Hey there,
I managed to fulfill my requirement..
If its a cluster on same machine or across machines, this should work
1. Login to machine, cd $DOMAIN_HOME
2. mkdir -p Apex_lsn_config/AdminServer Apex_lsn_config/<MS1> Apex_lsn_config/<MS2> # MS1 and MS2 are the Managed Server names as appropriate
#If you are planning for cluster spawning MS's across machines, make sure you create the dir's on step 2 for each machine respectively. (in my case $DOMAIN_HOME is not shared)
3. Copy apex-config.xml from the /tmp/apex or whatever location you have it currently to Apex_lsn_config/<MS1> Apex_lsn_config/<MS2>
4. cd $DOMAIN_HOME/bin; cp -p SetDomainEnv.sh SetDomainEnv.sh.orig #Backup the file
5. Append -Djava.io.tmpdir in SetDomainEnv.sh as below for JAVA_OPTIONS # Do it on both machine if you are not sharing DOMAIN_HOME and planning cluster across machines
-Djava.io.tmpdir=$DOMAIN_HOME/APEX_CONFIG/${SERVER_NAME}
Hint: Search for "iterativeDev" and append the same line with -Djava.jo.tmpdir
6. Modify "java.io.tmpdir" from the web.xml file of apex.war as below and re-deploy the war
<context-param>
<param-name>config.dir</param-name>
<param-value>${java.io.tmpdir}</param-value>
</context-param>
7. Bounce Weblogic Admin and Manged Servers. Make sure to tail the Managed Server log to see apex-config.xml is picked from the new location.
8. Brew a Coffee for yourself :)
- You find the instructions on creating a cluster from weblogic documentation, the steps mentioned above are only to overcome the bdb locking issue whilst creating a cluster.
Did it help?
Edited by: Oratime on Mar 25, 2013 2:44 AM

How to create multiple nodes for single activity in workflow.

Hi Gurus,
I am developing the PR workflow. and in that I want to create 2 different nodes for signle activity.
how can I create those multiple outcomes for signel activity in workflow.
Thanks in Advcance.
Vinod

Hi ,
You can use Outcomes tab in your workflow step...
What is the step... is it related to release...
what is that you want to do...
Regards
Gautam

"XSL Error: Cannot use a DTMLiaison for a input DOM node"

This code:
Writer writer = new StringWriter();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
// Note: event.getDocument() returns a
// org.apache.xerces.dom.DocumentImpl
// sourced from xlms.jar
processor.process(new XSLTInputSource(event.getDocument()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(writer));
Gives this stacktrace:
XSL Error: Cannot use a DTMLiaison for a input DOM node... pass a weblogic.apache.xalan.xpath.xdom.XercesLiaison
instead!
XSL Error: SAX Exception
weblogic.apache.xalan.xslt.XSLProcessorException:
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1756)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1648)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:876)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:600)
1. All XML/XSLT classes are being sourced from weblogic.jar or xmlx.jar
2. Both jar files come from the WLS installation (WLS6.0 + SP2)
3. There are no other XML class providers on my class path
4. This is a standalone application, not running within WLS; I'm using weblogic
jarfiles here purely so I use the same XML implementation both inside and outside
WLS. Is this a sensible approach?
Any help, anyone?

All works fine in WLS6.1, with this extra code:
System.setProperty("javax.xml.transform.TransformerFactory",
"weblogic.apache.xalan.processor.TransformerFactoryImpl");
(or you could use -D)
No longer concerned; we've moved off WLS6.0
"Simon Spruzen" <[email protected]> wrote:
>
Interestingly, expanding the code to (the very verbose):
Document sourceDocument = event.getDocument();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
StringWriter source = new StringWriter();
XMLSerializer sourceSerializer = new XMLSerializer(source, new OutputFormat(sourceDocument));
sourceSerializer.asDOMSerializer();
sourceSerializer.serialize(sourceDocument.getDocumentElement());
StringWriter output = new StringWriter();
processor.process(new XSLTInputSource(source.toString()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(output));
(i.e. document -> string -> transform -> string)
works just fine, but this code is far too long-winded for me to be happy
with.
(Note that one of XSLTInputSource's ctors does take a Node, so I'm assuming
that
it should be perfectly safe to pass a Document here)
(Note also, that for various reasons at the moment, using JAXP's transformer
factory
is difficult for us)
"Simon Spruzen" <[email protected]> wrote:
This code:
Writer writer = new StringWriter();
XSLTProcessor processor = XSLTProcessorFactory.getProcessor();
// Note: event.getDocument() returns a
// org.apache.xerces.dom.DocumentImpl
// sourced from xlms.jar
processor.process(new XSLTInputSource(event.getDocument()),
new XSLTInputSource(new FileReader(GDS_XSLT_STYLESHEET)),
new XSLTResultTarget(writer));
Gives this stacktrace:
XSL Error: Cannot use a DTMLiaison for a input DOM node... pass a weblogic.apache.xalan.xpath.xdom.XercesLiaison
instead!
XSL Error: SAX Exception
weblogic.apache.xalan.xslt.XSLProcessorException:
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1756)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.error(XSLTEngineImpl.java:1648)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.getSourceTreeFromInput(XSLTEngineImpl.java:876)
     at weblogic.apache.xalan.xslt.XSLTEngineImpl.process(XSLTEngineImpl.java:600)
1. All XML/XSLT classes are being sourced from weblogic.jar or xmlx.jar
2. Both jar files come from the WLS installation (WLS6.0 + SP2)
3. There are no other XML class providers on my class path
4. This is a standalone application, not running within WLS; I'm using
weblogic
jarfiles here purely so I use the same XML implementation both inside
and outside
WLS. Is this a sensible approach?
Any help, anyone?

Idoc numbers for a certain output in Sales Orders

I have more than hundred Sales Order
One EDI output was triggered (with a unique partner type) from each of these Sales Orders.
How to find idoc numbers for all these Sales Order for this particular output?
I tried WE09 giving Segment and field with value....two issues with this. first is it is not working for me...not records found.
Secondly It take one value at a time. I can't do this for every Sales Order
Is there any database table or something else to find these idocs?
Thanks a lot!

Hi,
if this special partner type is the partner type of the IDoc receiver, then you can search for relevant IDocs in transaction WE02.
If you need a partner type out of the sales order data, then it is stored in table EDID4 "IDoc Data Records".

How to get multiple elements into one element as multiple occurences

I can't figure out how to do this. I have an input message that has multiple elements and I need to take those elements and copy them into one element with each new element going in as a new occurence or instance. For example
I have this input under one parent node.
element1
element2
element3
element4
and this is the output I need
Node
Element1[0]
Element2[1]
Element3[2]
Element4[3]
The input XML looks like this
Payload
Element1
Element2
Element3
and the output XML needs to look like this
Payload
Element.
Thanks in advance

How about this.
Input XML:
<Row>
          <Column1>TOTAL</Column1>
          <Column_9_2_2008>900</Column_9_2_2008>
          <Column_9_2_20082>890</Column_9_2_20082>
          <Column_9_3_2008>52</Column_9_3_2008>
          <Column_9_4_2008>0</Column_9_4_2008>
          <Column_9_4_20082>0</Column_9_4_20082>
          <Column_9_5_2008>0</Column_9_5_2008>
          <Column_9_5_20082>0</Column_9_5_20082>
          <Column_9_8_2008>0</Column_9_8_2008>
          <Column_9_8_20082>0</Column_9_8_20082>
          <Column_9_9_2008>0</Column_9_9_2008>
          <Column_9_9_20082>0</Column_9_9_20082>
          <Column_9_10_2008>0</Column_9_10_2008>
          <Column_9_10_20082>0</Column_9_10_20082>
          <Column_9_11_2008>0</Column_9_11_2008>
          <Column_9_11_20082>0</Column_9_11_20082>
          <Column_9_12_2008>0</Column_9_12_2008>
          <Column_9_12_20082>0</Column_9_12_20082>
          <Column_9_15_2008>0</Column_9_15_2008>
          <Column_9_15_20082>0</Column_9_15_20082>
          <Column_9_16_2008>0</Column_9_16_2008>
          <Column_9_16_20082>0</Column_9_16_20082>
          <Column_9_17_2008>0</Column_9_17_2008>
          <Column_9_17_20082>0</Column_9_17_20082>
          <Column_9_18_2008>0</Column_9_18_2008>
          <Column_9_18_20082>0</Column_9_18_20082>
          <Column_9_19_2008>0</Column_9_19_2008>
          <Column_9_19_20082>0</Column_9_19_20082>
          <Column_9_22_2008>0</Column_9_22_2008>
          <Column_9_22_20082>0</Column_9_22_20082>
          <Column_9_23_2008>0</Column_9_23_2008>
          <Column_9_23_20082>0</Column_9_23_20082>
          <Column_9_24_2008>0</Column_9_24_2008>
          <Column_9_24_20082>0</Column_9_24_20082>
          <Column_9_25_2008>0</Column_9_25_2008>
          <Column_9_25_20082>0</Column_9_25_20082>
          <Column_9_26_2008>0</Column_9_26_2008>
          <Column_9_26_20082>0</Column_9_26_20082>
          <Column_9_29_2008>0</Column_9_29_2008>
          <Column_9_29_20082>0</Column_9_29_20082>
          <Column_9_30_2008>0</Column_9_30_2008>
     </Row>
Output XML:
<Total>
          <Payload>900</Payload>
     </Total>
     <Total>
               <Payload>890</Payload>
     </Total>
     <Total>
               <Payload>52</Payload>
     </Total>

Multiple target files - Idoc to File scenario - Simple question

Hi,
I have a simple IDOC to File scenario. However at the occurence of a node say node A I need to generate a file
For example if the input IDOC has 3 Nodes for Node A I need to have 3 different files one for each node.
Any help is appreicated.
Thanks
Joe

Hi,
Map your node A to the Target root node.
it will generate the Flat files based on node A.
Regards,
sukarna.

How to use Call library function node for a function in dll with VOID data type

Hi All,
I would like to ask for your kind help,
I am facing an issue with the call library node.
I have a C++ function(stdcall), which has void as data type
error code XXXX(hwnd, lID, getValue, *void data1, *void data2)
the data1 and data2 types are always changing depending upoin the value of "getValue".
Primarily i can use call library node multiple times and adapt each node according to the data types of data1 and data2, and extract the values and use in the code. Here is no issue. Real question is:
My question:
How can i just use one time call library node and make a case depending upon the "getvalue", which will control the data type of data1 and data2. Here i really looking for solutions.
My trials:
i used varaints as input to the call libray node for data1 and data2, and selected Parameters in call libraby node as " Adapt to type". here labview just crashed.
i really appreciate your feedbackand suggestions.
Thanks
Kutbuddin
Solved!
Go to Solution.
Attachments:
Clipboard02.jpg ‏103 KB

A variant is a very specific LabVIEW datatype (really a C++ type object internally) and trying to pass that to a function, which excepts a flat memory pointer there, for sure will crash very quickly.
As to endianess, yes Unflatten will be able to adjust for endianess, which in this case however is most likely exectly NOT what you want. So make sure that the you select native type for the endianess input on Unflatten from String. LabVIEW internally works with whatever is the native endianess, as will most likely your C++ DLL. The platform independent big endian format does only come into play when you receive data streams over some streaming interface like a network connection. Here it is desirable to use an endian format that is independent from the actual platform that generates and consumes the data stream. LabVIEWs default endianes is big endian here.
But as long as you pass data directly to native components like DLLs there is no difference in endianess between what LabVIEW uses and what those components use.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Multiple occurence of IDOC node for certain input combination in mapping

Similar Messages

Maybe you are looking for