Multiple planning systems

Hi Experts,
  I am working with a client wherein we have APO, TM1,BIP/BPS,DP all implemented in one system... i mean there is spl system for SCM APO although, but data is moving hence forth from BW to APO/DP and vice versa while other tools are implemented in BW.
   I am curious to know why would one require all kinds of planning????  what could be significance and their inter/intra relationship as each tool will in end do planning.
One more thing if i search/google/ SDN  then i get to know their is one more tool BPC but as far as i know it is not yet implemented into my system, but strange thing is if everything related to planning was implemented why was BPC left out...(any specfic disadvtg/ issues with tool)
Any help/scenario  to explain them would be appreciated...
Thanks and Regards,
Yogz
points will be assigned to meaningful answers

any help/pointer on above question please??

Similar Messages

  • Multiple planned orders in MRP run

    Hi All
    I have a requirement where I need to create multiple planned order for the same material during MRP run. I understand that once I run MRP a planned order creates. If I run again for the same material, the quantity will be changed for the same planned order. Do we have any configuration so that system creates multiple planned orders for same material for each MRP run.

    Hi Adithya
    Planned orders may be changed by MRP until they are firmed. Therefore, what you need to do is to firm the planned orders after the MRP execution.
    You can use for example, transaction MD19 to mass firm planned orders after each MRP run.
    Otherwise, you can user BAdI MD_PLDORD_CHANGE to automatically firm the planned orders created by MRP.
    BR
    Caetano

  • Multiple planned orders for a requirement

    Hi,
           We have PPDS MRP with NEW shelflife w/ lot size profle run for product and produces multiple planned orders for the the requirements.
    I have a requirement of 4,750 and 14,976 in the system and available stock 86,966.
    The system creates two planned orders with 34,632 and 26,771 PCs.
    Why is the system creating two order instead of one??
    The min. lot size is 1876 and rounding is 936.
    can somebody tell me what factors the system is considering??
    Thanks.

    Hi Visu,
    Which lot size procedure you are using , please check in lot size tab in Product master, it should be lot for lot.
    if it is lot for lot , please change it to by period and weekly , is it change the planned order quantity ?
    Manish

  • Need a Data Integration for multiple ERP systems

    We are doing some research into a data integration layer to our BW 7.3/BOBJ 4.0 from multiple ERPs.  Of course we are looking at Data Services and Information Steward in the BOBJ suite but just looking for anybody's recommendations on the topic.
    What technology platform do you use to do the extract, transform, load processes from multiple backend sources into BW?  Any you would advise us to avoid? 

    Hello Edward,
    The answer depends on multiple factors.
    Some pointers:
    Volume and growth of db in scope planning (Federation vs replication )
    If data federation is where you want to move data services / BO tools will be ideal
    If your data is coming from multiple ERP systems you can utilize there delta queue to load data via data services (in case of SAP)
    Use native DB connect/UD connect functionalities in BW as with BW 7.3 its delta capable.
    Moving to BW 7.4 you will have SDA to solve that problem of integration to Non - SAP data into your EDW landscape
    These are pointers but I would say talk to enterprise architects and look into the foresight of wheyare you want to move your EDW platform.
    Cheers!
    Suyash

  • Delta and Init Process when R/3 is connected to multiple BW systems

    I have a scenarion where one R/3 system connected to 2 BW systems.
    In R/3 we plan to have a LO extractor feeding delta to 2 BW systems. I understand delta works fine as delta queue in RSA7 is target system specific.
    How are the initializations handled?
    What happens if delta in one of the BW system breaks and we need to re-Init?
    How would re-init from one BW system affect the delta/init in the other BW?

    Hey.  I'm assuming both BWs are pointing to the same system/client.  I do not have actual experience doing this as I would be very hesitant to have multiple BW systems trying to get delta data from the same source (especially with how logistics behaves).
    I know this isn't answering your true question, but could you connect BW system B to pulling the data from BW system A?  So something like:
    R/3 (logistics) => BW A 1st layer DSO
           BW A 1st layer DSO => BW A reporting DSOs/Cubes
           BW A 1st layer DSO => BW B reporting DSOs/Cubes
    In this way, reporting in BW systems A and B are from the same DSO stage.  This would help with any synch/data consistency issues.  If A or B reporting providers get corrupted, or whatever, either could be reloaded from BW A 1st layer DSO and everything is still in synch. 
    Not sure if this helps you or not, but thought I would offer it up as this would probably be my approach.
    Thanks

  • How to reschedule multiple planned orders ?

    Hello guys..
    The rescheduling can be done manually via transaction MDAC/ report SAPMM61P.
    MDAC gathers all parameters necessary for function module MD_SET_ACTION_PLAF. In MDAC only one planned order can be schedule.
    I want to create the report in which, the planned order number should be replaced with selection criteria for multiple planned orders. The other fields should be the same as in transaction MDAC.

    hi,
    there are two ways of doing it but both needs technical person's help:
    1. switch off back ward scheduling - find out the program which is triggering back ward scheduling and make it inactive.
    2. write a code in MV45AFZZ, SDTRM001 stating that when ever system is proposing back date at that point of time it should trigger todays date as Material Availbility Date.
    then no need to change manually to todays date.
    hope this should help you.
    please check the same with ABAPER and update the forum
    regards,
    balajia

  • Convert multiple planned orders to single production order

    Dear All !
    In our business, same component is used for manufacturing multiple items. In a sales order multiple items are booked. When we do MRP RUN, system creates multiple planned orders for each line item. We can run only one production order as for every item order quantity becomes very small and we cannot process that lot. To have a sizable lot quantity we need to combine all planned orders into a single production order.
    Can someone please help.

    Govinder,
    Define those components for collective processing. You need to define "2" - for Field Indv/Coll in MRP4 view of those material master and you can have daily/weekly/monthly lotsize defined for those items.
    Regards,
    Prasobh

  • Combining multiple planned orders into single purchase requisition

    Hi Gurus,
    could anyone please tell me how to convert multiple planned orders generated during MRP run into a single purchase requisition? Also, is there any other way of getting single purchase requisition fcreated after MRP run for a procured item which is part of multiple BOMs?
    Thanks and regards,
    Abhik

    Hi,
    Conversion of Multiple planned order to single Purchase requisition is not possible.
    But you can have a single Pur.Req for Multiple requirements.
    You can do this by:
    1. Individual/collective indicator "2" collective requirements for the Header Material so that you will get your dependent requirements clubbed together.
    2. Period Lot sizing : Daily/weekly/monthly Lot size so that system will club the entire period requirements and propose a single lot.
    3. for low value materials you can have Reorder Point planning also.
    Hope this helps..
    Regards,
    Siva

  • Multiple Logical Systems in Partner Profile for one instance

    Can we create multiple Logical Systems in Partner Profile (WE20) for one instance or one System?  If it is possible, can we create Logical System with respect to Plant/Country?

    I am not quite sure if I understood your problem completley. But let's see...
    Usually you use on on MSCS Cluster Group per SAP instance. So you have your already existing NW 7.0 ABAP stack in a separated Cluster Group, and you create a new Cluster Group for your new Java system.
    You can find more information about it in this guide here on SDN:
    Link: [High Availability;
    More information about High Availability Setups for SAP System can be found here on SDN:
    Link: [High Availability]
    If you want to use the same database for your clustered ABAP stack and your new Java stack you can do a MCOD installation.
    Please see Link: [SAP Note 388866 - Multiple Components on One Database - Installation|https://service.sap.com/sap/support/notes/388866]
    Hope this helps.
    Best regards,
    Mathias

  • Please help me get my laptop back someone has cracked the master password and is running multiple operating systems which I have no access to

    Okay so I am not a computer expert by any means and have no clue how to fix my system. My father worked for intel for over 20 years as an engineer I asked him to restore my laptop to its original factory state and instead he cracked the master password
    installed multiple operating systems and made himself the administrator or domain controller. Many features and options I do not have access to so reading the trouble shooting and going through the steps always leads me to a dead end. The laptop is TOSHIBA
    SATELLITE L875D-S7332 a6 VISION AMD WINDOWS 8. As far as I can see my profile is actual running a version of windows 7. I do see reference to a windows 8RT windows 2003 windows vista wow64 and 32 I don't know what all that means I would just like to know how
    wipe everything and get back to the factory condition I bought it in. If anyone can help it would be much appreciated

    Do you have Win 7 installation disk? If yes, then go ahead and format the laptop if you don't need any data. If you need the data it it, then copy the same to USB disk and format it. Removing OS and deleting these things will anyhow keep some remains on
    HDD. TO get the speed and performance back, you might need a fresh installation. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

  • How to use a Web Template with queries from multiple BW Systems?

    Hi all,
    can anybody help me how to use a Web Template with queries (DATA PROVIDER)in it from multiple BW Systems?
    Thanks in advance, best regards
    Frank

    Great! Thanks for the quick response.
    Have you tried this for XMLA datasources created within the EP system also?
    i.e use Web Analyzer to create a view from the XMLA source and use that view within WAD?
    Thanks.

  • How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

    The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
    It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

    Hi,
    Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
    The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
    The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
    I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
    Therefore, as you are indicating that some of your system are at  a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
    I would think your only solution would  be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
    Regards
    Ray Farmer
    Regards
    Ray Farmer

  • Creation of sales order in CRM and replicating it to Multiple ECC system.

    We have a requirement for creation of sales order in CRM and replicating it to Multiple ECC system.
    We have checked the following standard Adapter objects in transaction R3AC1.
    BUS_TRANS_MSG
    The initial flow contexts does not support target site type as R/3(SMOF_ ERPSITE). So we are not able to replicate the sales order from CRM
    to ECC.
        2. SALESDOCUMENT
    Here the initial flow contexts does not support flow from CRM -> R/3 as we don’t see the target site as CRM.
    Please let us know if the standard sap middleware objects don’t support the sales order flow from CRM to multiple ECC or is there any
    other adapter object we need to use for this.

    Hey Vijay Duvvada,
    I hope you are already referred below sap note  and which explains scope & how to do   -
    1084315 - Consulting: Information about the multiple backend scenario
    1763516 - How-to: Basic Setup of MEP
    As explained by Rohit Sharma data should be start flowing to multiple sites.
    please let me know if it does help.
    Regards,
    Arjun

  • Multiple SRM Systems One SRM-MDM Catalog?

    Hi
    I'm currently upgrading our SRM 5.0 to SRM 7.01 with SRM-MDM Catalog 7.01.  Is it possible to use one SRM-MDM Catalog in our non-production environment and connect multiple SRM systems to it?
    For example our sandbox, development and QA SRM 7.01 systems would all connect to the same SRM-MDM Catalog 7.01.
    Thanks.
    Neil

    Hi,
    for non-production use and if it is just a catalog without custom coding running I see no problem in using one MDM server for multiple SRM systems (especially sharing one for sandboxes and dev). It is a setup I have seen multiple times and it worked always without problems.
    You should set up different repositories for each SRM system so that you don't interfere with each others data (i.e. suppliers or other lookups tied to SRM).
    You have to keep in mind that you have to upgrade all systems together. But you can always use separate MDM servers during the upgrade process and then consolidate onto one server when the upgrade is done.
    If you are running custom coding with your MDM catalog I would recommend having a separate MDM system for the QA SRM in order to be closer to the production set-up when testing your custom solution.
    Regards,
    Martin

  • Find exact RFC Destination for Multiple backend Systems In SAP Gateway

    Hi Gateway developers,
    I have requirement,if gateway hub system has multiple backend systems( for example two backend systems: ECC and SRM ) then  how  hub system can get the suitable backend alias for exact entity collection..
    Here i have developed two entities one entity regards: ECC and second one regards SRM system..within this when I run the service it is always taking any of the same alias for both the collections..
    Can you please suggest me..
    Thanks
    Sreenivas Pachva

    Hi Srinivas,
    You can add the respective system Alias Name: Like logical system name in your URI also.
    Example:
    /sap/Service Name;mo=ECCCLNT210/zentity1?Customer1='0001'
    /sap/Service Name;mo=SRMCLNT400/zentity2?Customer2='ABCD'
    May this help you.
    Thanks,
    Saurabh Gupta

Maybe you are looking for