Multiple Range Selection for field Material in CS14
Hi friends ,
Is it possible to make multiple range selection for material field in tcode CS14 [used to compare primary and secondary BOM] i have made it ZCS14.
if i make matnr2 to matnr2-low
but my doubt is it feasible solution
please through some light on this
regards
soorya
Dear Soorya,
What's your requirement? is that to compare the Alternative BOM's for multiple materials at the same time?
If it's going to be for comparing one more alternative for the same material,then it's a good report.
As per to my knowledge if the report is going to be for a list of materials Alternative BOM's means I dont
think whether it will be a fast(time wise) report.
Check & revert back.
Regards
Mangalraj.S
Similar Messages
-
F-44 ZBAPI MULTIPLE LINE SELECTIONS FOR WEB SERVICES
HI TO ALL,
I HAVE WRITTEN ZBAPI FOR POSTING MULTIPLE LINE SELECTIONS FOR TCODE F-44, THE ZBAPI CONSIST OF BDC PROGRAM, WHICH IS WORKING IN SAP SYSTEM PERFECTLY BUT WHEN I AM USING IT IN WEB SERVICES IT IS THROWING A ERROR MESSAGE.
PLEASE CAN ANY ONE TELL ME DOES THIS PROCESS WILL WORK OR NOT, IF YES HOW IS IT POSSIBLEHi Gabriel,
Let me try to answer some of your questions:
1) The "Requires Secure Access" attribute of a resource handler controls whether this handler must be accessed/consumed only over SSL (HTTPS). Oracle Database Cloud Schema Service is only offered over SSL, so this attribute does not have any effect on RESTful services deployed in this environment (because secure access is always required and there is no other way). That said, if you want to access such web service from your own APEX instance, your instance must have Oracle Wallet configured with appropriate SSL certificate.
2) The URI parameters are not required. If your web service returns data for many entities (for example, list of employees in employees/), you may not need a parameter. If your web service returns data for one specific entity (for example, details of one employee in employees/{id}), you may want to identify that entity with a URI parameter.
3) You can have many URI parameters, for example: customers/{id}/orders/{order_id}.
4) Yes, these are the same HTTP methods/verbs you would use from PHP.
5) If you are trying this POST example from your own APEX instance (not Oracle Database Cloud Schema Service) and you are trying to access a web service over SSL, then it is likely that the Oracle Wallet used by your instance does not include the required SSL certificate(s), or the Oracle Wallet is not configured at all.
6) I recommend to check RESTful Web Services for the Oracle Database Cloud white paper and Oracle REST Data Services Developers Guide. Oracle REST Data Services is the technology that enables RESTful services in the Oracle Database Cloud Schema Service.
You can certainly create your own web services in the Oracle Database Cloud Schema Service and consume them from the same environment.
Vlad -
Multiple line selection for RRI in WAD
Is it possible to select multiple lines from 1 query and do a RRI to the receiver query. Eg : Select multiple POs and then go to PO details query which shows PO details of multiple POs in WAD and both the results shown in the same web report?
I tried the below solution, but all I get is the display of the entire Master data dump and not the filtered values. Any suggestion?????
Rao
Posts: 135
Registered: 6/24/04
Forum Points: 8
Re: Multiple line selection for RRI
Posted: Feb 4, 2008 2:22 PM in response to: LAKSHMI HARINDRAN Reply
Yes. You can do this. You create web template with ANALYSIS web item. In the item parameters of ANALYSIS web item, you can set a property, single line or multiple for the runtime selection. Once you do this, you create a button option or context selection menu option to jump target. In the button (RRI button) in the command sequence, the first command should be SET_SELECTION_STATE_BY_BINDING and then, the RRI command to jump to the target. Hope it will help.
Venny.Hi, Do you have any solution on this. please suggest. Thanks
-
Maintenance of multiple Valuation Categories for a Material
Hi All,
Presently we are using split Valuation Category H(Origin) & Valuation Types Domestic & Imported.We need to keep track of materials that are serviced externally with status for material(Refurbished & Repairable) for same material so that we can maintan no of times a material has been repaired.Also material should not be valuated when it is to be received after repair. Please suggest the solutionYou can't use multiple valuation category for one material..
You can use multiple valuation type under one valuation category.
Suppose you have two valuation category Origin and Status.
Origin has two valuation types 1. Domestic and 2. Imported
And your Status has two valuation types 1. Refurbished and 2. Repairable.
Then you can create a new valuation category as Z and create 4 valuation type under this valuation category
1. Domestic-Refurbished
2. Imported-Refurbished
3. Domestic-Repairable
4. Imported-Repairable.
Then you can use valuation type as per your requirement. Also you can create more valuation type as per your requirement.
Regards
Dev -
How to do range selection for connected clips?
How to do range selection for connected clips? Whenever I press I or O, it only selects the primary storyline. I want select a portion of the connected clip and trim it.
If you're using the 10.1.x, and if you set the playhead, so that the circle is over the connected clilp (you don't even need a range selection OR have the clip selected) you can type Option - [ to trim from the beginning of the clip to the playhead; you can type Option - ] to trim from the playhead to the end; or if you do set a Range selection, you can type Option - \ (backslash) to trim both ends off the clip preserving the range selection.
If that circle isn't over the connected clip you require (perhaps you have a stack of clips) then you will need to click on the clip you need to have selected for the trim operation. -
Multiple storage locations for single material - ECC 6.0
Hi
Can anyone let me know, how one can map multiple storage loctions for single material?
regards
Sanjayhello,
Go to SPRO --> IMG --> Materials Management --> Inventory Management and Physical Inventory --> Plant Parameters.
Tick Create storage locations automatically. System will extend the material to the storage location maintained in the transaction.
Nikhil -
Hi all ,
While i am trying to run initdelta i am getting error message "init select for field name Currently running in request REQ_jijhoieoililh" how to resolve.
i am unable to fill setup tables for plant maintinence datasource 2li_17_I3HDR i am not finding option in SBIW.
Also i am getting Error "No Successful initialisation of the delta update took place " how to do that i did in
infopackage but but still getting this error.
thanks in advance--Hello Srinivas,
in the transaction LBWE, in the plant maintainance applcation, in the update column for MC17I30HDR, make it active.
then proceed with filling the setup tables.
also
take a look Roberto's weblog
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Hope this helps..
thanks, -
In prod order multiple batch selection for my raw material /sf possible
Dear All,
One of problem I am facing is regarding multiple batch selection .
Scenario is like this
Finished prdt _ FMBLD003
RAW matl - 2RCH001
In prodn order my BOM requirement quantity for 2RCH001 IS 75 kg , I have material available in stock in three diffrent batches
0000111 40 kg
0000112 15 kg
0000113 30 kg
I can select any one batch at a time. Is there any option or possibility available wherein we can select multiple batches .
or Is there possibility that system should automatically split bom quantity as per the batch quantity available shown below
40 0000111
15 0000112
20 0000113
I tried but didnt found possible solution.
Please suggest .
Edited by: sapitheprabhu on May 3, 2011 7:28 AM
Edited by: sapitheprabhu on May 3, 2011 7:48 AMDear Prabhu,
When do batch determination you maintain req qty against to batch number in batch determination co: select batch.
0000111 40 kg
0000112 15 kg
0000113 30 kg
Jainashu -
Import multiple info records for 1 material item in repository
Hi Guys,
I have got sort of a puzzle I can not solve at the moment, maybe some one can help me to solve it. The situation in our system landscape is as follows:
Systems:
SRM 5.0 (Classic implementation scenario)
ECC 6.0
SRM-MDM 2.0
PI 2005
Material master is maintained in R/3 and the materials are replicated to SRM. From SRM we replicate all materials to the catalog repository in SRM-MDM.
As the material master in R/3 is vendor independent, the materials replicated to SRM also have no vendor attached. For the first initial material replication from SRM to the catalog SRM-MDM this also means that the products in the main table of the repository, u2018catalog positionsu2019, will not have a vendor or vendor number attached (i.e. no reference to a source of supply).
To assign a source of supply in the repository to a product (record) we will use info records which are replicated from R/3 to SRM-MDM. The mapping for this in the Import Manager can only be based on the product number. As this is the only unique value available which can map a info record to a already existing (but vendor less) ptoduct item in the catalog.
As long as every item in the repository has only one unique info record, meaning one source of supply with a specific price, there is no issue in the above scenario. Based on the product-id, the info record data will be matched with the material item in the catalog.
The issue for me arises when multiple info records exists for the same material. The info records can heave different vendors and different prices. All possible vendors should be available in the catalog for the same material (at least this is the requirement ).
At this point the product-id will no longer be an unique value. Importing the info records will cause problems, as only one material record is available in the repository for the specific product-id (remember that when doing a initial replication of the material master to the catalog, no vendor data is replicated).
Does anyone had this issue before, and knows a solution? Is it for example possible during the import of the info records in the Import manager, to duplicate material records in the destination data, based on the number of info records available in the source data for the same product-id. Or is there an other solution that I am missing?
Your help would be appreciated!
Regards,
SkanderHi Shai & Ravi,
Thanks for your answers. The MDM version which we are using is 5.5 - currently on SP6
@ Shai: you are right; the standard SRM-MDM 2.0 catalog repository has a qualified lookup table u2018priceu2019, in which itu2019s possible to store the info record data. The standard fields in this sub-table are: Purchase Org, Amount, Currency Lower B, PIR-ID, price based quantity and Price based quantity UoM.
I added some extra fields (non qualified), to accompany the remaining info record data (product no. u2013 vendor id u2013 product category) which is exported/imported, via the standard extraction program in R/3: Tcode MECCM
I tried the solution Ravi proposed. This scenario works fine when, for example you want to maintain multiple info records for one specific material record in the main table (all info records related to the same source of supply, i.e. vendor). But as I described, the info records we import for one product can have different vendors.
The source of supply (vendor) in the shopping cart of SRM is determined via the u2018supplieru2019 field in the main repository table (which is in itself a flat lookup table ). What happens now is that all related info records are added to the u2018price informationu2019 field of the specific product record in the main table. Thus info records which have different suppliers are attached to a record in the main table which will have one specific supplier in the u2018supplieru2019 field. So from my point of view this will not work.
I am still stuck with the situation that the material master import will only import one record for every distinct product, which can have multiple info records. The info records can/will have different vendors. As the supplier field in the main table determines the source of supply in the shopping cartu2026. Iu2019am seeking for a solution which will duplicate the material records in the main table, based on the amount of imported info records for that specific material record, that have distinct vendors.
Shai, if you have some useful info on how you accomplished this requirement on a previous version of SRM-MDM, it would be greatly appreciated if you can share it..
Thx.
Skander -
Multiple row selection for table element
Hi,
I have a requirement where I require to select multiple rows from a table element in a WD for abap application.
I have defined a node with cardinality and selection set to 1..n.
The contex node contains 4 fields : emp_name, pernr, manager and position.
The attributes of the table element for selectionmode is set to 'multi' and 'selectionchangebehaviour' is set to 'auto'.
I have defined an action on the 'onleadselection' event.
The code in this method also includes the statement 'lo_el_team_view->set_selected( EXPORTING flag = abap_true ).'
When I execute the application only 1 row is highlighted at any one time when I select it. You can select multiple rows by holding down the 'ctrl' key but I want to avoid having to do this. Is there anything I have missed out causing multiple row selections not to be all highlighted.
Thanks in advance for any assistance.Hi raj,
you can try the following code in the 'onleadselect' event of the table,
create one attribute ' Flag' of type WDY_BOOLEAN under the node which has been binded to the table.
DATA lo_nd_node_tab1 TYPE REF TO if_wd_context_node.
DATA lo_el_node_tab1 TYPE REF TO if_wd_context_element.
DATA lo_elements TYPE wdr_context_element_set.
DATA lo_ele_select_new TYPE REF TO if_wd_context_element.
DATA lv_deselect TYPE wdy_boolean.
DATA lv_flag TYPE wdy_boolean.
DATA lv_select TYPE wdy_boolean.
DATA lv_index TYPE i VALUE 0.
lo_nd_node_tab1 = wd_context->get_child_node( name = wd_this->wdctx_node_tab1 ).
get the current selected element
lo_ele_select_new = wdevent->get_context_element( name = 'NEW_ROW_ELEMENT' ).
CHECK lo_ele_select_new IS NOT INITIAL.
check whether it has been selected or not
CALL METHOD lo_ele_select_new->is_selected
RECEIVING
flag = lv_select.
lo_ele_select_new->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_deselect ).
check whether element has been previously selected or not,if not, set the flag to select it
IF lv_select IS NOT INITIAL AND lv_deselect IS INITIAL.
lo_ele_select_new->set_attribute( name = 'FLAG' value = 'X' ).
if selected currently and previously then set the flag as false,in order to delect it
ELSEIF lv_select IS NOT INITIAL AND lv_deselect IS NOT INITIAL..
lo_ele_select_new->set_attribute( name = 'FLAG' value = ' ' ).
ENDIF.
CALL METHOD lo_nd_node_tab1->get_elements
RECEIVING
set = lo_elements.
according to the falg, select and delect the elements
LOOP AT lo_elements INTO lo_el_node_tab1.
lo_el_node_tab1->get_attribute( EXPORTING name = 'FLAG' IMPORTING value = lv_flag ).
IF lv_flag = 'X'.
lo_el_node_tab1->set_selected( abap_true ).
lo_nd_node_tab1->set_lead_selection_index( lv_index ). * this statement deselects the lead selection index*
ELSE.
lo_el_node_tab1->set_selected( abap_false ).
lo_nd_node_tab1->set_lead_selection_index( lv_index ).
ENDIF.
ENDLOOP.
I hope this resolves your problem.
Thanks,
krishna -
Material selection for trasnfering material planing with MS64
Dear SAPper,
When i create the planned ind req MD61.
i used product group.
but i have difficulties when copying with MS64 from one version to another one.
There is not selection for prod group
is there any idea for this? for selection the material accoridng prod group?
or another idea is very appreciated:)
Kindly help,
Best regards,
Freddy Ha
Edited by: Freddy Halim on Sep 16, 2008 10:24 AMHI,
thanx for the quick response.
I use product group in MD61 to create planning with version 01 (inactive).
After several update the PPIC will copy with MS64 to version 00 (Active) so MRP will planned them
I have two option either product group or plan req number.
But when copying with MS64 there is not selection material with criteria product group or plan req number.
Is there anyway for copying several material only with criteria prod group / plan req number?
I look for multiple selection for material master. There is no match code for product group too.
Do you have any ides?
Best regards,
Freddy Ha -
Production order from sales order with multiple line item(for one material)
Dear Gurus,
I am working in MTO scenarios. If there is several line item in a sales order for one material, multiple production order( same as no. of sales order line item) is getting created against each of the line item.My requirement is,since the material code is same in each line item and sales order is one, one production order should be generated for all line item. please tell me how to do it.
(Here for one material, multiple line item is required for some specific reason)
Regards
Rajib PathakHi,
This is not possible.
In Std SAP will create one production order for one sales order. The stock is also allocated to thet particular sales order only. Because each and every sales order may vary in any one of the parameters. Considering this, SAP has designed like this.
Regards,
V. Suresh -
Unable to enter multiple Schedule lines for BOM material in Sales Order
Hi All,
We have a Sales Order where in which we cannot add additional schedule lines for BOM material.
The schedule lines are greyed out, user was able to add schedule lines earlier.
I have checked all assignments in VOV6, VOV7 and everything seems to be fine and no changes have been made to item category being used.
Please provide a solution for this.
PFB link in which similar situation posted in this community but the final resolution method is not discussed.
http://scn.sap.com/message/13201504#13201504
Regards,
SamikshHi Samiksh,
Pls check for that particular customer, only complete delivery allowed(c) is set in the CMR or CMIR. If so, you can't enter multiple schedule lines for that customer.. it would be grayed out in the sales order schedule lines except confirmed line.
or check the problematic sales order at item level shipping tab if the par del/item is set to 'C'
With regards
S.Siva -
Multiple keystrokes selection for a JComboBox in JTable
Has anyone used multiple keystrokes selection in a JComboBox inside JTable before? I can get it done outside JTable by using: http://javaalmanac.com/egs/javax.swing/combobox_CbMultiKey.html
Looks like JTable has all kinds of problems to support JComboBox.
Suggestions?
Thanks,
JamesIf I read you right, you want to use a multiple keystroke combo box as an editor in a JTable?
If you create the JComboBox as you would like it and then install it as an editor in the column(s) JTable the editor will work like the JComboBox
Example:
//- you would have that keyselection Manager class
// This key selection manager will handle selections based on multiple keys.
class MyKeySelectionManager implements JComboBox.KeySelectionManager { .... };
//- Create the JComboBox with the multiple keystroke ability
//- Create a read-only combobox
String[] items = {"Ant", "Ape", "Bat", "Boa", "Cat", "Cow"};
JComboBox cboBox = new JComboBox(items);
// Install the custom key selection manager
cboBox.setKeySelectionManager(new MyKeySelectionManager());
//- combo box editor for the JTable
DefaultCellEditor cboBoxCellEditor = new DefaultCellEditor(cboBox);
//- set the editor to the specified COlumn in the JTable - for example the first column (0)
tcm.getColumn(0).setCellEditor(cboBoxCellEditor); Finally, it may be necessary to to put a KeyPressed listener for the Tab key, and if you enter the column that has the JComboBox:
1) start the editting
table.editCellAt(row, col);2) get the editor component and cast it into a JComboBox (in this case)
Component comp = table.getEditorComponent();
JComboBox cboComp = (JComboBox) comp;3) give this compent the foucus to do its deed
cboComp.requestFocus();Hope this helps!
dd -
Multiple storage bin for single material
Hi,
We wanted to assign multiple storage bins in the material master as the material is stored in mutilple storage bin in the same storage location. We are not using WM.
We want to resolve the issue without implementing WM.
Please advice where and how do we maintain the same.
In plant data / stor 1 view there is a provision for maintaining only one storage bin.
Thanks,
Reddyit is not possible without WM.
As workaround :
You either create for each storage bin a storage location,
or
you active batch management and let the batch work as bin.
Maybe you are looking for
-
How can i create a new user in OID DIT tree programmatically ?
Dear All, How can i create a new user object in the OID DIT tree programmatically ? any help will be appreciated. Regards, Mohammed Amin
-
Using Multiple Event Listeners
Hi, I have a movielcip (A) class in which I have used a Tween class effect on a child movieclip (B) scrollRect. The (B) Movieclip in turn has several movieclips whose have tween class effect being executed on thier child movieclips. the tweens are al
-
every time i sync in my music in my iphone 5 it would have to back up my iphone and every time i back up the loading bar would freeze then my itunes with crash pls help my iphone 5 cost a lot from my savings
-
I can't make updates from SQL Developer
I've been using SQL Navigator from Quest software to make some updates to data. I just run a select query with the updateable button selected and i can type in my updates and hit commit to make changes. I can't figure out how to do this in SQL Develo
-
OfficeJet J6480 Duplex Printing not working
Duplexer is installed correctly with my OfficeJet J6480. When I try to print a two sided page using AUTOMATIC setting, it prints a page and pushces out the page without rolling it back to print on the other side. Any input on correcting this issue?