Multiple receivng storage locations on Reservation (movement type 311)

Hi
We have a requirement where we create a reservation document either using BAPI or BDC (MB21). At the time of creation we require to maintain different receiving storage location on the reservation. Currently SAP allows to maintain receiving storage location on the header field RKPF - UMLGO only and then copies the same value on all line item field (RESB-UMLGO)..The line item field is not editable or set as I/O field therefore working on finding a user exit or BADI to update fields RESB - UMLGO in background. Has any one had this requirement and in case yes can you please advise how was this addressed.
Thanks
Lokesh

Hi,
If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
I would suggest you to follow the above steps.
1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
Regards,

Similar Messages

  • Create storage location automatically for movement type 261

    Hi Experts,
    Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
    For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
    Did we missed any required configuration? Pls kindly advice on what we should do.
    Thanks a lot. Really appreciate the prompt response.
    Rgds,
    MD

    Here's the current situation,
    We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
    Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
    Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
    But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
    Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
    Thank you

  • Receiving storage location in reservation created manually CAN NOT change

    Hello All,
    i created a reservation manually by transaction MB21 with std movement type 311, then i can not change the receiving storage location in transaction MB22 due to the field status of receiving storage location is display only, but not optional.   That means i can not change receiving storage location of reservation if i entry mistaken.
    So, how can i change the receiving storage locaiton  by MB22 for a open new reservation? thanks.
    Best Regard
    Joseph Chen

    in mb22 if the field is in display mode, it is not possible to change.
    It is not possibsle to  change through screen layout for reservations.
    so delete the present one and crate new reservation.

  • Stock trasfer reservation with movement type 311

    Dear APO Experts,
    I have plant 1200 and storage location MRP area CA_03 within plant 1200.
    When planning, STRs are created and if ciffed to ERP, reservation with movement type 301 is shown.
    My question is as follows.
    Is it possible to create these reservations in APO with the movement type 311 (sloc to sloc) instead of the movement type 301 (plant to plant).
    Thanks in advance for your help.
    Regards,
    Lee, Seung Won

    Hi Lee Seung Won,
    To the best of my knowledge it may not work as you are expecting. The basis reason seems to be that SLOC is not treated as SLOC in APO when it is defined as MRP Area. MRP area (SLOC) is treated as  Plant (Location) in APO. Hence movement type will be 301 plant to plant  & not 311 sloc to sloc
    Thanks,
    Mangesh A. Kulkarni

  • Issue material to particular storage location with particular mvt type

    Hi
    I have a question about production order confirmation
    If i enter the storage location in goods movement page automatically come for movement type
    ex.
    I want to issue the material to scrap location.if i enter material and storage location SCR movement type should come 531.
    Is it possible ?
    Pl guide me

    531 movement type is used for receipt of By-products. So in your case if a particular item you want to receive in scrap location by the use of 531 then you have to define the item as by-product.
    If you define the material as by-product then during production order confirmation at goods movement screen, the movement type will be automatically 531.
    The main material (manufactured material) will be received using 101 and the by-product will be received by 531.
    Please follow below steps to define the item as by-product:
    - First change the BOM of the header material (the material which is manufactured) and enter the item with negative quantity.
    - Run Re-read PP master data for the production order.
    - Try confirmation.

  • REM- Planned order with Movement type 311

    Hi,
    I want to use movement type 311 along with planned order in MFBF but system is not allowing me.
    Do I need to mention movement type 311 somewhere in configuration of planned order.
    Regards,
    Samir Wadajkar

    Dear
    Basically Movement 311 will be used for Material Staging.Material Staging can done with reference to the Material or with reference to the Planned Order etc...
    You can do the following with MF60:
    1. Direct stock transfer : You must select Staging type (Storage location level)
    To use direct stock transfer, you must maintain an issue storage location for each component in the BOM (or in the material master record or the production version). The system only displays those requirements for which you have defined an issue storage location
    2. Stock transfer reservation : You must select Staging type ‘1’ (Storage location level)
    The system then automatically displays the storage location view of the pull list. The system also only selects the corresponding requirements.
    In Global Settings, you must adopt the default settings and you must also select Stock transfer reservation.
    I hope you must have maintained the Customization Setting for Stock Determination Strategy with reference to your plant with 311 movement.
    Further details refer below link:
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/a5a8d04adc11d189740000e8322d00/content.htm
    Hope this is clear to you
    Regards
    JH

  • MB1B with mov. type 311 - error message

    hai experts
    I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
    Pl. help me to come out of this problem
    Regards,
    sree

    Your deletion and recreation has nothing to do with this message, here am very certain.
    But to identify what the message caused, you have to give the full message along with its message number (double click message)
    It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

  • MB21 mov.type 311 and planorders

    Hi Gurus
    I hope one of you Guys / girls can help me or point me in the right direction
    In MB21 Mov.type 311 we create reservations on materials that are normally MTO Stock. This Means that the reservation will create a plan order when the MRP is run onthose materials. This is all ok, but if we have 2 - 3 reservations on the same material SAP standard is to create one plan order for the number og materials missing in order to cover the 3 reservations.
    In the picking process one employee will pick the entire reservation, including the MTO which is basically a BOM for picking ( screws, botls, bearings etc etc )
    The reason we use mov.type 311 is the each reservation are to be moved to another storage location that is physical Places elsewhere, but not defined as a warehouse.
    Is it at all possible til have the MRP create a planorder for each reservation ?
    Kind regards
    Jens Olsen
    Denmark

    Hello Jens
    If the reservations have all the same date, MRP will always create a single replenishment proposal, even if you are using lot sizing procedure EX.
    See question 6 of the FAQ note 550568:
    6.  Question:
         There are several requirements on one day. Is it possible that the
         MRP creates a separate procurement proposal for every requirement?
         Answer:
         Same as for the daily lot size with a number of periods = 1 (lot
         size TB), requirements of one day are also grouped into one
         procurement proposal for the lot-for-lot order quantity (lot size
         EX) (see documentation for the lot-for-lot order quantity). Separate
         procurement proposals can be achieved only if you work with
         make-to-order production. Here, the requirements are managed in
         separate planning segments of the stock/requirements list.
    BR
    Caetano

  • Movement type 311 E in WM

    Hi gurus,
    I am working on product support @clients place where we have MTO items.
    Now the scenario is that a material XYZ was Goods Receipted in a wrong storage location (0001) by the Production Order confirmation. This was due to the way it was setup was incorrect.
    So to create a Delivery for these items, I had to move the stock from the current location (0001) to another location(0002) in the same plant.
    For this I used MB1B - 331 E. This worked fine on the IM side.
    Now on the WM side there was an entry e.g. 0001 E - Storage type (010) before the change was done.
    After the change, the transfer posting entered a negative entry for the same quantity of the item. However this negative entry is lying in the Interim storage type 992 e.g. 0001 E - Storage type (992)
    I want to nullify these 2 entries. So i read on some forums & thought of doing a LT01 and transfer the positive value from 0001 E - 010 to 0001 E - 992.
    However for storage type 010, negative stock is not allowed.
    I am confused & dont know what to do in this case.
    Can anyone tell me how to nullify this WM stock ?
    Your help will be really appreciated.
    Thanks
    Dan

    Hi,
    If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
    As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
    I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
    I would suggest you to follow the above steps.
    1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
    2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
    Regards,

  • Ountbound delivery with MB1B movement type 311

    Hi,
    I would like to create an outbound delivery when I make the tcode MB1B movement type 311.
    Somebody could tell me where is it in SPRO?
    Thank you
    Regards
    Kari

    Dear Kari
    I am afraid that the approach suggested is not feasible. As of SAP R/3 4.7, it is indeed possible to carry out stock transfer orders between two storage locations of the same plant but you cannot create the purchase order with transaction MB1B. (The movement type, moreover, would be 641, not 311.)
    However, MB1B does create outbound deliveries for transfer postings with movement type 311 if the issuing storage location is either Handling Unit managed or assigned to a decentralized WM.
    Best regards,
    Christiane

  • MB1B movement type 311

    Hi every body
    I need help about transfer order.
    Whan I make a transfert with Tcode MB1B movement type 311, I haven't got transfert order created.
    Somebody could help me?
    The material stay in the storage type 921.
    Thanck you
    Kari

    Elmka,
    There are several things that could stop the Transfer Order from being created. Please check the following:
    Is the source bin blocked due to inventory?
    Is the material in unrestricted stock?
    If you are transfering partial stock from one Sloc to another, and the stock is maintained in multiple warehouose bins, then SAP may not have been able to determine which bin to select. Test this in the WH activity monitor (Tcode LL01) - there should be an open transfer Requirement. Select it and process in the background. If it errors, try processing it in the foreground and manually select the bin and quantity.
    If the stock is in one bin or you are transfering the ENTIRE quantity but the TO still wasn't created, check configuration to ensure auto TO is configured (2 places to check):
    >IMG: Logistics Execution > Warehouse Management > Activities > Transfers > Define Movement Types
    >IMG: Logistics Execution > Warehouse Management > Interfaces > Inventory Management > Define Movement Types >> LE-WM Interface to Inventory Management - - Here you ensure your IM movement type 311 & 312 are assigned to WM movement types 311 & 312 + have Immediate TO creation set to "A" (automatically in the background)

  • Value in  Movement Type 311

    Dear All,
    We are transfering material from One Storage location to another using T-code MB26/MB1B. When We see material movement through MB51 it shows no value. We know, system is showing zero value, as there is no financial transaction in movement type 311. How can we know how much value of material transfered from X storage location to Y storage location from (a) date to (b) date.
    Regards
    Rajeev Gupta
    Edited by: RAJEEV GUPTA on Dec 31, 2007 8:26 AM

    Dear friend,
    In 311 movement funtion for material transfer from one storage location to another, Once this movement will hit,  Only Material document will trigger to create, Account document will not create,, If you need to find the value of transfer material.Plz check plant level stk with mvt type

  • Movement type 311- get value against a material

    Hi All,
    I can get a report of stock value and qty against a material from MCBE report.
    But for movement type 311,I am getting only the stock qunatity but not value.
    Will there be associated value for this movement type.
    Is there any other way where I can see associated value.Please suggest.
    Thanks in advance.

    Hi,
    Mvt type 311 is the transfer between storage location to location in the same plant. Only quantity will be updated and no value will be updated because the valuation area in the same plant.
    Here only material document will be generated and no accounting document.
    You can see the stock report in t code  MB52 locationwise stock with value.
    Regards
    Ram
    Edited by: ramachandran subramanian on Apr 6, 2009 10:02 AM

  • Idoc mbgmcr02 movement type 311 ..  goods movement not possible w/mvmt type

    i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
    when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
    if i do the exact same thing with the transaction migo...works fine...
    am i missing something????

    i am trying to move material from one location to another using IDOC MBGMCR02..
    I am entering the following...
    E1BP2017_GM_Code=04
    in e1BP2017_GM_ITEM_Create
      Material=CON2020
      Plant=3000
      Stg_Loc=0001
      Move_Type=311
      Entry Qty=001
      Move_Mat=Con2020
      Move_Plant=3000
      Move_Stloc=0002
      Mvt_Ind=??????
      In the Mvt_Ind I have tried E,K,M,Q
      the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
      Is E1BP2017_GM_CODE = 4 correct???
      What should be the Mvt_Ind???

  • Outbound deliveries with movement type 311

    Hi every body,
    My problem is the following :
    I need to make a transfert from a storage location to an other storage location in the same plant with an outbound delivery.
    I try the tcode MB1B movement type 311, but I have just the creation of a transfert order.
    I activate the customizing  MM "Set up Stock Transport Order"> Set Up Stock Transfer Between Storage Locations>Activate Stock Transfer Between Storage Locations
    But I still have the creation of a transfert order.
    Anybody could help me?
    Thanks a lot
    Regards
    Kari

    Hello Kari,
    To enable stock transport order you have to customize folowing settings Formation in *OSS note 498143.*
    1. You must assign a delivery type to the purchase order document type/supplying plant combination. You can do this in the IMG for purchasing under "Purchase Order > Set Up Stock Transport Order > Assign Delivery Type and Checking Rule". NL (Replenishment delivery) is provided for intra-company-code stock transfers and NLCC (Replenishment delivery cross company) for cross-company-code stock transfers.
    2. You must assign sales and distribution (SD) organizational units to the supplying plant. They are a sales organization and a
    distribution channel. Purchasing > Purchase order > Set up Stock Transport Order > Plant.
    3. You must assign a customer master record to the receiving plant. IMG Purchasing > Purchase Order > Set Up Stock
    Transport Order > Plant. You require a customer master record for the receiving plant. This customer master record must be
    created for the organizational units of the supplying plant
    (point 2) (Logistics > Sales and Distribution > Master Data > Business Partners > Customers > Create -> sales and distribution VD01 or total XD01).
    For the intra-company-code stock transport (PO DOC TYPE UB),  it is sufficent to create the customer master record as a goods recipient (VD01). For the cross-company-code stock transport with shipping and billing documents, a complete cutomer master reccord is required (XD01).
    4. For the material to be transferred, you must create the sales organization data for the sales organization/distribution channel
    of the supplying plant (point 2), and you must maintain the sales view (general plant data) for the supplying plant.
    5. If there is a cross-company-code stock transport, you must create a vendor master record for the purchasing organization of the receiving plant. You must assign the supplying plant to the vendor master record. The assignment is executed in the vendor master record from the purchasing organization screen using "Extras > Additional Purchasing Data".
    6. You must enter a shipping point for the combination of shipping condition (from the customer master record of the
    ordering plant, see point 3) - loading group (from the material master) - supplying plant, IMG: Logistics Execution > Shipping > Basic Shipping Functions > Shipping Point and Goods Receiving Point Determination > Assign shipping points.
    Br,
    Tushar

Maybe you are looking for

  • Can't open .inx files in CS3 that were created in CS2

    I am presented with a message.. 'Indesign.exe has encountered a problem and needs to close. We are sorry for the inconvenience.' This happens when I open a .inx file from it's location by double clicking on it and also if I open CS2 and use the file>

  • Sql query to achive the running division

    Hi all, plz help me out with the sql query to achive the below output create table emp_a (empno number, deptno number, sal number) insert into emp_a values(901, 10,100); insert into emp_a values(902, 10,400); insert into emp_a values(901, 20,300); in

  • My purchase cleared so where are my chips for play

    I purchased $20 worth of chips for Poker deck and my payment cleared my bank so where the heck are the chips i bought? they aren't showing up. I left my phone number on their site form and submitted where they said they would call me back in two minu

  • HT1918 where do i find the list of devices authorized for my apple ID

    How do i access the list of activated devices connected to my apple id

  • Sh runinstaller problem

    when I was doing sh runinstaller the following problem is occurring. Initializing Java Virtual Machine from /tmp/OraInstall2006-01-31_04-25-59PM/jre/bin/java. Please wait... /tmp/OraInstall2006-01-31_04-25-59PM/jre/bin/i386/native_threads/java: error