Multiple replacements with same problem

I cannot count how many replacement Motorola android RAZR HD I have had but its getting ridiculous. Must have been at least 4 in the last couple weeks. My wife has had her iPhone since we started our contract but I must be at 10+ droids by now. They all have their own issues but mostly all fail to charge properly. Thought I may be at fault so for this last one I went and bought brand new chargers at Verizon store. But nope, I have been using this phone 28 hours and I cannot get it to charge. Just over one day! If I am told that the fix for this is another droid, well that may be the end of Verizon for me. I live in a remote area with satellite internet and so for me to send my info to the cloud and pull it to new device costs me a lot each time. Don't even get me started w Verizon cloud issues. When I first asked how to transfer ally info to new phone I was told via Verizon cloud. I got none of my photos. They are in the cloud and I have to one by one download them. I didn't have to do that for my contacts but I do for photos, well that's not transferring ALL my stuff as I asked now is it. Anyways back to this garbage droid they keep sending me. Anyone w any ideas? cause if I can only swap for another garbage droid that will only cost me $ to put only my contacts on and then give same issue Tomorrow I would rather cancel our two phones and go w a company that understands I can only follow their rules for so long before I need someone to make a real world decision and get me a phone that I will not want to throw multiple times every day.

Hi Jasoninadks,
Oh no! 4 replacement devices in weeks is too many! Let's locate your missing charge. Are you purchasing chargers made by the manufacturer for this phone? Has there been any liquid or physical damage to this device? Where you able to get the pictures downloaded from the cloud http://vz.to/1pHC1Q6? Are you eligible for new equipment? Dial #UPG from your cellphone.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Similar Messages

No sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem.

no sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem. No sounds coming out from the speakers, even after reset everything. Mute button is assigned for mute function instead of screen rotation lock.

Hi herbie13!
It sounds like you will still want to link your iPad and computer, but you want to prevent the iPad from syncing information from your computer to your iPad. I have an article here for you that can help tell you how to set this up:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386
You will want to follow the steps here to set up the iPad for syncing, but when it comes time to sync, you'll just want to make sure that the boxes for syncing the multitude of items that you can sync remain unchecked so that none of that information gets synced into the iPad.
Another note: your second Apple ID will not be able to access the apps, music, movies, tv shows, etc., that you have purchased under your primary Apple ID. Even though it seems that the secondary Apple ID still has access to those items, that is just because you are viewing your second Apple ID through the iTunes Store section on your computer and you have those items saved locally on your computer. You will need to repurchase and download all of the content that you wish to use again on your second Apple ID, if that is what you wish to solely use on this iPad.
Take care, and thanks for visiting the Apple Support Communities.
-Braden

HT1689 Dexter wrap-up podcasts for Season 8 fail to download to my iPad or iPhone. Works on my Mac. Anyone else with same problem?

Any others with same problem?

http://support.apple.com/kb/HT5394
This states that you need to do an smc reset for full powernap functionality. It could be effecting it if it was an older macbook air that you updated to mountain lion?
Ryan

Read multiples files with same extension

how to read multiples files with same extension in java.
for ex : i would like to read all .DAT files from C drive using java.
How is it done

- You create the filter
- You get the list of files
- You open and read each file.
For the first two above you look at java.io.File and listFiles(FileFilter filter).
For the third you find whatever input stream is appropriate from java.io.*

Multiple accounts with same email

I have multiple accounts with same email
The one that has all my contacts is the one attached to FB but for some odd reason I can no longer access this specific account
When I try to reset my password, it only keeps asking me to change my FB password
Once I try logging in on Skype, it keeps asking my FB to connect to the other 2 Skype accounts, completely diffente usernames
I am only interested in the one that originally connected to my FB as it has all my contacts
As my other 2 accounts are my old Skype accounts and have my old contacts from years ago

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Multiple members with same alias

I have multiple members with same alias name. Are there anyway to build dimension members with same alias name?

Typically I will concatinate the member name (as either a prefix or suffix ) to the Alias to make it unique

Mounting multiple directories with same name on different severs to a single mount point on another server

We have a requirement where in we have multiple solaris servers and each solaris server has a directory with the same name.
The files in these directories will be different.
These same name directories on multiple severs has to be mounted to a single directory on another sever.
We are planning to use NFS, but it seems we can not mount multiple directories with same name on different severs to a single mount point using NFS, and we need to create multiple mount points.
Is there any way we can achieve this so that all the directories can be mounted to a single mount point?

You can try to mount all these mount points via NFS in one additional server and then export this new tree again via NFS to all your servers.
No sure if this works. If this works, then you will have in this case just an additional level in the tree.

Multiple accounts with same email can't acces original account

ok, so i created a new skype. I was messing with skype account on my desktop and wound up unlinking and re linking the account basically i made 2 extra accounts and they have my live: random.namehere_1 and live: random.namehere_2 and i cant log into my original one anymore also when i try to do a recovery it says i have 2-3 skype accounts on my email and i cant log into my accounts by typing in the live:random.namehere and the password it just says ooops something went wrong basicallly saying the pw and account name are wrong when they arent i made sure of it. so how do i eliminate the cloned accounts and log into the main one.

Actually this morning I was able to log on the account from an iPad with no fuss but the pc refuses to sign in^^^!???! "Skype couldn't connect" - What is going on???
I also found out that I could sign in via a browser but not via skype program... So I uninstalled it and installed it again and it's working now...
I have now changed the email so I don't have 3 accounts with the same primary email as Skype seems to not being able to handle multiple accounts with same email!!!

Replacement Ipod Dead With Same Problems, what am i doing wrong?

I bought a Classic, it started to not play some of my songs, then it crashed, then i couldnt revive it or put anything on it, so i sent it back and received a new one promptly. Guess what, same problems, stopped playing some songs about a week ago, HDD makes strange sounds as if trying and failing to locate tracks, then i did a restore after i reworked my itunes library and now the pc is starting to not recognize it and cant add songs and restoring is a pointless option, ipod is full of songs up to the letter G after a failed library sync. PlEASE help me remedy so that i dont have to replace my replacement with another ipod that needs to be replaced

Ok here's what I did: While the modem was still connected to my PC, my router was plugged in and just had power so I did the hard reset like you said. Then I plugged the modem into the router, reset my modem and plugged the ethernet cable back into my tower and Now it works. The only problem is that I have is that when i get to http://198.162.1.1/ and leave username blank and password admin, I keep getting 401 Unauthorized. I would really like to be on a secured network but I never could because the easylink advisor wouldn't work right and I couldn't get the laptop to get connected. Thank you for your help.

Bridge CS4 won't output to pdf multiple images with same filename

Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)

When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences?

Podcast synching on multiple macs with same account

How do I get my podcasts to synch on multiple macs and therefore ipods with same itunes authorized account, ie the subscriptions I have on home computer don't show up on my work itunes account and therefore when I'ved watched flying one way, when I land I want to load the next set of episodes, but find the need to create entirely new subscriptions?
Thanks
george

I was able to resolve the problem using addMessageCountListener and messagesAdded method, as suggested by you.
I am now facing another problem. Whenever a new message is received, code inside messagesAdded method gets executed. Here I am trying to spawn another thread and do some stuff. But this new thread is not starting at all. It goes into some JavaMail:EventQueue and does nothing. What is the concept of EventQueue here? How can I get this new thread executed?
Also will there be synchronization problems in messagesAdded method. Say I received a message and I am processing it in the messagesAdded method. In the mean time another message comes up. How will this behave.

T61p back from depot after 1 month with same problems, phone support no help

I ordered this on Feb 8. My CC was billed March 5th which is around when I physically got it. I basically troubleshooted it until the end of the month before calling to get it sent for repairs. Got the box for the depot on April 3 and sent it the same day. Got the laptop back just on Monday May 12. Now it still doesn't work, and I'm wondering what the heck to do.
Problems with the T61p:
1. Cardbus non functional; The pci/cardbus bridge is detected fine and drivers not a problem. The system doesn't detect any card inserted in the T61p. I have a $100 firewire 800 card I've used without problems in many laptops (I can test in one right now), but this T61p doesn't see it at all. This is not a driver issue for any particular card, but the fact that windows doesn't detect any new hardware when a card is inserted.
Sent to the depot at the beginning of April and I got it back this Monday. They replaced the mainboard and pcmcia slot (as it says on the slip included). Still having the exact same problem.
2. Completely unstable with a 1394b expresscard; Since I cannot get the cardbus slot to work, my only option is an expresscard. I am using a studio quality sound interface, Fireface 800 from RME. This is a great piece of hardware that works flawlessly on my 5 year old AMD box. However, on the T61p if I playback audio through it, connected via a SIIG firewire 800 expresscard (high quality, and one of the _only_ 1394b expresscards out there) the system completely locks up in a matter of minutes.
The main reason for this laptop purchase was for music production with the RME Fireface. It is 100% the T61p causing the problem, not power management issues, driver issues, the SIIG card, or physical connections, etc. You can see my thread at RME from March when I was trying to figure this out:
http://rme-audio.de/forum/viewtopic.php?pid=11332
I haven't had a full month of use of this thing. I would very much just like a return at this point. I don't want to wait another month for a depot repair, seeing as the last one didn't resolve anything. If I could get a fully working model of this T61p that would be great, but I see this 14.1" SXGA+ isn't even offered anymore.
Talking to support is horrible. Last I talked to someone who was technically clueless, saying he would do research and call me back. I call back the next day and there isn't even a record of me talking to anyone...
Anyone have any advice? I'm coming to the forums because I'm just stuck here with a laptop I can't use, and don't know what to do with...
EDIT/update:
I managed to get this number finally (1-866-968-4465) and talked to someone who seemed to actually care. So I've gotten somewhere, I guess the forum post doesn't help much. I'll update the result anyway...
Message Edited by trancer on 05-16-2008 01:46 PM

Mine is the siig NN-EC2812-S1 2-port FireWire 800 ExpressCard/54 and the carbus card is a StarTech.com CB1394B3
Where do you read about chipset compatability probs with siig cards? What would be a better card?
Edit:
I could get one of these within a day or so:
belkin F5U514 $98 CAN
startech EC1394B2 $119 CAN
sonnet FW800-E34 $98 CAN
Know which would be better to try?
Message Edited by trancer on 05-16-2008 03:06 PM
Message Edited by trancer on 05-16-2008 03:07 PM
Message Edited by trancer on 05-16-2008 03:10 PM

Topic: Incorrect Tag:Multiple Attributes with Same Collection Type

I have an Object Type that contains multiple attributes with the same collection type. When I use OracleXML getXML to generate xml, the tag for all elements created for any of the matching types is the tag for the 1st of the similar attributes.
work_t_v is an object view of a relational schema
SQL> desc work_t_v
Name Null? Type
WORK_ID NUMBER(38)
TITLE_OF_WORK VARCHAR2(512)
MESH_HEADINGS MESH_HEADINGS_T
AUTHORS AUTHORS_T
COMMENT_ON WORK_REFERENCES_T
COMMENT_IN WORK_REFERENCES_T
ERRATUM_IN WORK_REFERENCES_T
REPUBLISHED_FROM WORK_REFERENCES_T
REPUBLISHED_IN WORK_REFERENCES_T
SQL> desc work_references_t
work_references_t TABLE OF WORK_REFERENCE_T
Name Null? Type
REFSOURCE VARCHAR2(255)
NOTE VARCHAR2(255)select
work.work_id,
work.title_of_work,
work.comment_on comment_on,
work.comment_in comment_in,
work.erratum_in erratum_in,
work.republished_from republished_from,
work.republished_in republished_in
from work_t_v work
where work_id = 99350984
results in tag of <comment_on> for all the elements built from the work_references_t type (i.e., there are no <comment_in>, <erratum_in>, <republished_from> or <republished_in> elements)
sample result is:
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
The above xml should be:
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_IN>
<COMMENT_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [CommentIn]</REFSOURCE>
</COMMENT_IN_ITEM>
</ERRATUM_IN>
<COMMENT_ON>
<ERRATUM_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [ErratumIn]</REFSOURCE>
</ERRATUM_IN_ITEM>
</ERRATUM_IN>
<REPUBLISHED_FROM>
<REPUBLISHED_FROM_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedFrom]</REFSOURCE>
</REPUBLISHED_FROM_ITEM>
</REPUBLISHED_FROM>
<REPUBLISHED_IN>
<REPUBLISHED_IN_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601 [RepublishedIn]</REFSOURCE>
</REPUBLISHED_IN_ITEM>
</REPUBLISHED_IN>bracketed portion [] is contained within the refsource string to indicate what type of reference it should be displayed as.
I also found that if I use the -withDTD parameter to include the dtd, the dtd includes the appropriate elements (comment_in, erratum_in, republished_from and republished_in). However, it incorrectly defines refsource and note multiple times (once for each WORK_REFERENCES_T attribute).
Are these known problems? Will they be fixed? I'm more concerned about the XML problem than the DTD problem.
Thanks! -- John Butler
null

Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
create type foo as object (a number);
create type foolist as table of foo;
create view fooview
as select
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list1,
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list2
from dual;
When I request a "SELECT * FROM FOOVIEW"
through getXML I get:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<LIST1>
<LIST1_ITEM>
<A>800</A>
</LIST1_ITEM>
</LIST1>
<LIST2>
<LIST2_ITEM>
<A>800</A>
</LIST2_ITEM>
</LIST2>
</ROW>
</ROWSET>
So this appears fixed in the next code drop.
In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
null

Incorrect Tag:Multiple Attributes with Same Collection Type

I have an Object Type that contains multiple attributes with the
same collection type. When I use OracleXML getXML to generate
xml, the tag for all elements created for any of the matching
types is the tag for the 1st of the similar attributes.
work_t_v is an object view of a relational schema
SQL> desc work_t_v
Name Null? Type
WORK_ID NUMBER(38)
TITLE_OF_WORK VARCHAR2(512)
MESH_HEADINGS MESH_HEADINGS_T
AUTHORS AUTHORS_T
COMMENT_ON WORK_REFERENCES_T
COMMENT_IN WORK_REFERENCES_T
ERRATUM_IN WORK_REFERENCES_T
REPUBLISHED_FROM WORK_REFERENCES_T
REPUBLISHED_IN WORK_REFERENCES_T
SQL> desc work_references_t
work_references_t TABLE OF WORK_REFERENCE_T
Name Null? Type
REFSOURCE VARCHAR2(255)
NOTE VARCHAR2(255)
select
work.work_id,
work.title_of_work,
work.comment_on comment_on,
work.comment_in comment_in,
work.erratum_in erratum_in,
work.republished_from republished_from,
work.republished_in republished_in
from work_t_v work
where work_id = 99350984
results in tag of <comment_on> for all the elements built from
the work_references_t type (i.e., there are no <comment_in>,
<erratum_in>, <republished_from> or <republished_in> elements)
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[CommentOn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[CommentIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[ErratumIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[RepublishedFrom]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
<COMMENT_ON>
<COMMENT_ON_ITEM>
<REFSOURCE>J Infect Dis 1998 Aug;178(2):601
[RepublishedIn]</REFSOURCE>
</COMMENT_ON_ITEM>
</COMMENT_ON>
bracketed portion [] is contained within the refsource string to
indicate what type of reference it should be displayed as.
I also found that if I use the -withDTD parameter to include the
dtd, the dtd includes the appropriate elements (comment_in,
erratum_in, republished_from and republished_in). However, it
incorrectly defines refsource and note multiple times (once for
each WORK_REFERENCES_T attribute).
Are these known problems? Will they be fixed? I'm more
concerned about the XML problem than the DTD problem.
Thanks! -- John Butler
null

Using the version of XML SQL Utility that comes with the next XSQL Servlet release 0.9.8.6 I did the following:
create type foo as object (a number);
create type foolist as table of foo;
create view fooview
as select
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list1,
cast(multiset(
select sal from emp where rownum < 2)
as foolist) list2
from dual;
When I request a "SELECT * FROM FOOVIEW"
through getXML I get:
<?xml version="1.0"?>
<ROWSET>
<ROW num="1">
<LIST1>
<LIST1_ITEM>
<A>800</A>
</LIST1_ITEM>
</LIST1>
<LIST2>
<LIST2_ITEM>
<A>800</A>
</LIST2_ITEM>
</LIST2>
</ROW>
</ROWSET>
So this appears fixed in the next code drop.
In the interim, I'll email you the new JAR file until (since it won't be on OTN for a few more days).
null

Someone else with same problems?

I have a kt4-ultra and i wato to know if someone else have or had my problem...i have i xp 2100+ and i am not able to run it at fsb 133 mhz i must set it to 125 mhz...
I haven't found solution at this problem....(temperature ok...400 w ali ok...ram ok...sk video ok...everything ok)
am i the only one with this problem??
Let me know please

G7LNO,
54C seems a little on the high side to me. It's within AMD specs, but I do not like the word, "Thermal Death".
Below is an example of my system, and the temps that apply to it. My system is not overclocked.
I have a 2400+, KT3 Ultra2-R motherboard, and just recently replaced the Dynatron cooler to a Thermalright SLK-800 with a Vantec Tornado turned down to 4000 RPM. While surfing the web with Norton running, MS messenger, Outlook Express, and four IE windows open, my CPU temps at a room temperature of 78F are: CPU-37 C, System 32 C. Cranking up the voltage to the Tornado and the CPU temp drops to 35C. System temp stays the same at 32 C.
When I use Sisoftware Sandra utilizing the CPU arithmetic and multmedia burn-in for one hour which places 100% load on the CPU, my CPU temp never goes over 39C and system temp rises to 34C; Vantec Tornado is set on high during full load tests.
The Vantec Tornado may be a bit of overkill at full voltage, but at 4000 RPM it is very tolerable. I truly believe the SLK-800 is very capable of excellent cooling with lower and quieter CFM fans. Big D1

Multiple replacements with same problem

Similar Messages

Maybe you are looking for