Multiple SAP products on a single server

Is it possible to install ERP 2005, BW, CRM, SSM and EP on a single server without virtualization? This is only intended for non-productive instances (DEV & QA)
I would also like to know if SAP has any information on this?
Thank you
Aubrey

Welcome to SDN Aubrey,
It is possible to do this assuming all the applications versions support the same DBs. You will have to size the server additively - you don't really save a CPU, memory, or Disk.
You have 2 options here:
MCOD: All the applications share the same DB but are separate applications with SIDs. Note that all applications must support the same release of your DB.
Separate DBs: All applications have separate DBs (assuming your OS/DB supports multiple installations).
There is a lot of good information in the master guides (SAP NetWeaver, mySAP ERP, and mySAP CRM). I'm not sure what SSM is?
http://service.sap.com/instguides
I hope this helps,
Mike.

Similar Messages

Are multiple presentation services on a single server really unsupported?

Hello all,
I can hear everywhere that multiple presentation services on a single server are not supported by Oracle, but I can't find an official source stating this.
All I could get is this page where it is stated that it is not recommended (but not unsupported):
https://supporthtml.oracle.com/ep/faces/secure/km/DocumentDisplay.jspx?id=1111655.1&h=Y
Can anyone please advise ?
Thank you in advance,
Cedric.

Hi cedric,
It is not recommened is what i can say,in simple words it gets jammed when you try to build a request from any of the services.
It is not supported cant be the reason,it has a work around to go and do that
Follow these blogs Multiple presentation servers using the same RPD
http://obiee101.blogspot.com/2009/10/obiee-multiple-repositorys-multiple.html
UPDATED POST
There is no such official document saying about its support by oracle,but oracle wont support handling two servers in production as it is not legal and it is going against the product capabilities.I would suggest you not to go with it.
Cheers,
KK
Edited by: Kranthi.K on Apr 11, 2011 2:53 AM

Multiple Java version on one Single Server

Hello All,
Linux RedHat 2.4.21-32.ELsmp
jdk1.3.0
j2sdk1.4.1_03
We currently have an application that only runs with java 1.3.0, but also we have other application that need to be on java 1.4.+.
What would be the right approuch in order to have multiple Java versions on a single server.
TIA,
Bruno

I am pretty sure you can do that.
I have done this with AccessGates and a Webgate is just an AccessGate with extra features. I am pretty sure we have done this on Apache with a webgate in different directories. Makes logical sense that it would work.
Thanks,
Scott

One Search service application for multiple web applications in a single server

We are planning to host 17 Web applications in a single Server. Do I need to create search service application for each web application or I need to create one Search service application , create a Content source for each web
application and create a Result source for filtering. Which is the best approach. And which approach takes more RAM memory.
In my application I am using Search web part, "Recently Changed Items", "Popular Items" web parts. when I created only one one Search Service application for all web applications and using Result sources ,
I am not getting the results. What could be the problem.

Hi,
One SSA is ok, but you should think about access rights. If the access is clear cut between all the web apps you should be ok with one SSA. Multiple result sources limiting on content source also works, but could easily be bypassed.
Multiple SSA's will eat up RAM/CPU like a mother :)
As for popular etc.. it could be due to how those sources are set up, but haven't investigated or tested this much.
Thanks,
Mikael
Search Enthusiast - SharePoint MVP/MCT/MCPD - If you find an answer useful, please up-vote it.
http://techmikael.blogspot.com/
Author of Working with FAST Search Server 2010 for SharePoint

SAP BW(NW2004s) Development and SAP BW Production(NW2004s) on Single Server

Hello Experts,
Currently we are having BW development and BW production on seperate IBM iseries servers with AS400.
Can we have dev and prd on same servers. What would be the implications of this landscape.
Please provide me the links for documentation (if any).
Waiting for the reply.
Thanks and regards,
Vinayak
Edited by: VGM on Apr 16, 2009 12:37 PM

I wouldn't put the two systems in the same server.
Simply... you'll find yourself with a single point of failure, any downtime required for OS maintainance or failure will affect the whole environment, having the two system in the same box could affect performance (depending on the resources available)... etc, etc....
In my opinion having a 2 tier environment is not ideal... and having them in the same box is even worst.
Thats my 2 cents
Regards
Juan

Multiple SAP Deliveries for a single container

SAP is creating deliveries for single purchase order. Multiple Deliveries are shipped together in the same container. At the end of the day, within WM we only want one ASN (Advanced Shipping Notice)to contain all of the information for the one physical container on WM.
Regards
Manoj

Hi Manjo,
Did you ever get a solution for this?
Kind Regards,
Finbarr

Installing/Configuring multiple CMS instances in a single server machine

Hello,
We are installing BO enterprise server and we have a requirement which is as follows..
1. We have been given 1 server machine ( actual physical hardware machine )
2. We have been given two database repository instances ( one for Dev , other for QA )
3. We have to configure the 2 environments in the same server.
This means, Having two different CMS instances and pointing them to 2 different database repositories in one hardware server machine.
Any pointers how this can be achieved ?
I found a link where its mentioned that it can be achieved through the concept of SIA
[http://www.businessobjectstips.com/tips/server/business-objects-xi-3-xs-server-intelligence-agent-sia/]
But how do we achieve it?

First of all - this is not a good idea. It's possible to do, but not a good practice.
The purpose of QA environment is to Test what has been developed. If QA and DEV are on the same machine - what's the point?
Then your hardware server has to be big enough to support this.
I might be better to have 2 VM instances...
As to how to go about doing that :
1. It has been discussed here before, so if you search you'll see some good threads on the subject.
2. You'll need to review Admin guide and Install and Deployment Planing guides for the version of BO software you're going to use. (http://help.sap.com)
3. While pure BO stuff is fairly easy - you just create 2 SIA each pointing to its own DB and use different port ranges for both - you'll need to think about how to go about maintaining 2 instances of the Application server (Tomcat, WAS, WL etc ) to host 2 sets of BOE web apps (Infoview/CMC/dswsbobje)).

Multiple owa sites on a single server 2012 with exchange 2013 (mailbox, cas)

hi,
I'm trying to
set up an exchange server 2013 on windows 2012 with all roles installed for 2 owa virtual directory, one for integrated windows authentication and the other for forms-based authentication.
I followed a tutorial for exchange 2010.
http://technicaljeditrials.info/2011/02/28/exchange-2010-multiple-owaecp-directories-part-1/
Step 1: IP Address
Obtain a second IP address and add it to the NIC of your server.
Step 2: DNS
Add a DNS entry for That secondary IP address for the name we will want to use in the new FBA OWA Web site.
I have chosen "testwebmail."
Be sure there is a valid SSL certificate (recommended to have UC or SAN
SSL certs) on the server Which has the new name "testwebmail" that will be used in the certificate.
Step 3: New Web Site
Create a new web site in IIS on the Client Access Server and bind it to the new IP address used in step 1.
Step 4: Adding Exchange Virtual Directories
The web site has been created and bound to the secondary IP address of our server.
Also the DNS record That will be used to access the OWA FBA new page was added to DNS.
The next step is to go into EMS and begin adding our virtual directories for OWA and ECP.
Login to the Exchange server and open the Exchange Management Shell.
Then run Get-Get-OWAVirtualDirectory and ECPVirtualDirectory to see the default OWA and ECP directories.
New-OWAVirtualDirectory -WebSiteName FBA -InternalUrl https://testwebmail.mylab.ad/owa
New-ECPVirtualDirectory -WebSiteName FBA -InternalUrl https://testwebmail.mylab.ad/ecp
Step 5: Configure the Virtual Directories
To configure the virtual directories we will disable FBA on the Default Web Site OWA and ECP virtual directories
Set-OWAVirtualDirectory -Identity "OWA (Default Web Site)" -WindowsAuthentication
$true -BasicAuthentication $false -FormsBasedAuthentication $false
Set-ECPVirtualDirectory -Identity "ECP (Default Web Site)"
-WindowsAuthentication $true -BasicAuthentication $false -FormsBasedAuthentication
$false
Step 6: iisreset
now if I access the default site I log in with
windows integrated authentication, but when I try to access the second site with forms authentication tells me username or password incorrect
Tell me you know where I'm wrong?
thanks
Greetings
Daniele

Hello,
Something like this:
New-OWAVirtualDirectory -WebSiteName "FBA"
Enable the Basic authentication via running the following command:
Set-OWAVirtualDirectory -Identity "yourservername\owa (FBA)" -BasicAuthentication $true
Restart the IIS admin service in services.msc
Thanks,
Simon Wu
TechNet Community Support

Multiple SAP systems on a Single LPAR

Hi Gurus,
We are planning to install ECC, BW, SRM, PI, EP, SolMan, NWDI on one LPAR on IBM i6.1 OS. I came to know that this is the common practice of installing SAP on IBM iseries.
Do I need to review for any dependencies or the technical limitations?
Obviously, the DB2 instance will be the same for all these systems and will be a MCOD solution.
If you have done any recent installations on IBM iseries, please let me know the lessons learned.
Thanks
Kalyan

Hi my friend
No problem to have multiple instances installed in one LPAR, like you said it's the common way to place your non-prod environment. Just make sure that OS level parameters of AS/400 are well tuned for this many instances running together from performance perspective, use IT4J JVM for AS Java instead of classic JVM. Here's some FYI:
Note 484548 - iSeries: 3 tier system installation
Note 192658 - Setting parameters for BW systems
Note 541508 - iSeries: Checking the system parameters for BW
Note 307077 - iSeries: Performance optimization for BW systems
Note: installing multiple instances in one LPAR doesn't mean it's a MCOD installation. They still have their own DB library, known as database on other platforms. In the case of MCOD, all instances will use the same DB library as database instance.
Regards,
Effan

Running Multiple weblogic Domains in a single server

How to run two domains simultaneously? I have one domain running on 7001. I want to run second domain on 7010. How can I achieve it?
Edited by: 789038 on Aug 23, 2010 9:55 AM

You need to ensure that no other port conflicts , not just ListenPort (SSL port as well) (e.g. if you run pointbase locally and if each domain is using a separate instance then the pointbase db shouldnt use the same port) - there is also a port specified (For i think debug ), that should also be different. Why are you doing this though?

Multiple SAP systems - Single Content Server

In a production landscape with multiple SAP systems and a single Content Server, would it be more efficient to allow each Web AS to access the Content Sever directly or should there be a single dedicated Web AS to access the single Content Server?
We do not have any load data; we are trying to find out if there are any heuristics for such a configuration.
Message was edited by: John Ryan

You may use the SAP Content server for data archiving. If you use content server, you may not be be able to satisfy the legal requirements as SAP content server cannot support a WORM devise.
SAP do not recomment using SAP CS for Data archiving as well. SAP CS could be best used as a temporary content stoarge for non legal document images.

Installation of SAP products on older 32-bit serves

Hi,
I have a special testing project. We want to install multiple SAP products on older 32-bit servers. These will be used in a proof-of-concept testing.
we will install these products on Windows 2003 32-bit with 4GB of RAM
Products to be installed:
SAP ECC 6.04 (EHP4)
SAP PI 7.11 (EHP1)
SAP SCM 7.01 (EHP1)
I looked in the PAM but am not still clear if these products are allowed to be installed on 32-bit.
Note that performance is not important and that I udnerstand that with 4GB per server, It will be tight.
thanks.

thanks,
I found a note in the ECC6-EHP4 installation guide.
You need to consider the following constraints before you start your installation:.u2039m×ùs
Your operating system platform must be 64-bit.
NOTE
The only instance, you can still install on 32-bit is the dialog instance
I might install these products is SR2 mode and patch them afterward... or I will ask for 64-bit servers.
Thanks.

Oracle multiple homes on a single server

This is about maintaining multiple oracle homes within a single server for different oracle versions.
On a Solaris-9 server I need to have 2 11g versions where 11.1.0.6 serves one instance and 11.1.0.7 is expected to serve 2 upgraded database instances.
For multiple homes involving full installations it is simply a matter of installing software in a new home with a new home-name. But 11.1.0.7 is a patch installation that needs an existing 11.1.0.6.
What is the recommended approach in this case to host multiple oracle homes?
Oracle's documentation claims their cloning tools can be used (prepare.pl and clone.pl perl scripts).
It also has something on runInstaller -clone mention.
What I've achieved so far is:
(1) Install 11.1.0.6 via Solaris-packaging onto a clean server. This installed onto $ORACLE_BASE/product/11.1.0 using ORACLE_HOME_NAME=OraDb11g_home1
(2) Upgrade this to 11.1.0.7
(3) Detach this oracle-home from global inventory
(4) Rename the folder 11.1.0 to 11.1.0.7
(5) Re-attach as new oracle-home (name=OraDb11g_11_1_0_7) and relink at the same time using runInstaller -clone command
I am no DBA, so I'd like to know if the above approach is good enough or if there is any other recommended approach.
Many thanks.
G.Sharma.
Edited by: Sharmag on May 31, 2012 11:38 AM

@Helios, thanks but curious - why is this not stuiable under installation? - regards,
@Shrini - I am using Solaris packaging for installing oracle software. So unless I rename the target folder I cannot achieve different the same 11.1.0.6 in 2 different folders.
Even if I managed to tweak Solaris packaging and install the second oracle (11.1.0.6) into a second folder, wouldn't that be the same as renaming an oracle folder-name? In this case, we still would end up with the same issue of relinking and correcting the global inventory.

Multiple SAP Systems to one LiveCache

Hi All,
I know some one in the past already discussed on this topic. I want to know is it possible to use a single MaxDB/LiveCache for more than one SAP System like SCM and WFD system to a single LiveCache. If this is possible and some one already done it, can you please let me know the high level config steps?. I was thinking MaxDB should able to support the MCOD concept, but I am not sure.
Thanks

Hi Narayan,
no, using one liveCache with several SCM installations is not possible.
Although MaxDB is of course possible to support an MCOD setup, the liveCache is not. This is due to the very tight coupling of the liveCache routines and the SCM ABAP code.
Anyhow, a special setup called OneDB is supported, where liveCache and the SCM database are stored within a single MaxDB instance.
This setup simplifies Backup/Restore to a great extent.
There is also no benefit in sharing one liveCache instance within several SCM instances as you can install multiple liveCache instances on a single server.
regards,
Lars

Multiple Oracle Products on Single Server

Can we install Multiple Oracle Products for Development and Testing on a Single Server?
Oracle Database 9i Enterprise Edition.
Oracle 9i Application Server
Oracle Applications 11i (Financials GL,HRMS PAYROLL)
Oracle Discoverer 4.x
Oracle Internet Developer Suite (Forms Server, Reports Server,
If yes,
Do they need to be in separate ORACLE_HOME or same ?
Also what should be the sequence of Install, i.e. what should be installed first?

The following products needs to be in their own Oracle Home:
Oracle Database 9i Enterprise Edition. --> in its own O_H
Oracle 9i Application Server --> in its own O_H (assuming this is 1.0.2.2 or 9.0.2)
Oracle Applications 11i (Financials GL,HRMS PAYROLL) --> in its own O_H
Oracle Discoverer 4.x --> in its own O_H (this is a 806 based product btw)
Oracle Internet Developer Suite (Forms Server, Reports Server) --> This can either be in its own O_H or in the O_H which has 1.0.2.2 Oracle9i Application Server.

Multiple SAP products on a single server

Similar Messages

Maybe you are looking for