Multiple screens on console

I understand that Solaris on SPARC does not have virtual terminals on the console like Interactive UNIX had. We need that basic functionality - we have multiple screen based utilities that need to be accessed from the console and that are running all the time.
Is there any way to achieve this? Are there third party products?
- Orion

You can try the 'screen' software. It gives you as many terminals
as you want thru a single tty. You use hotkeys to switch between
them. screen is freely available. check the gnu sites.
kommu

Similar Messages

  • Multiple screens issue on App Server 10.1.2.3

    Hi, I'm having an issue with having multiple screen open within the same session on App Server 10g.
    The first screen opens and operates just fine.
    When I open the 2nd screen, I have some poplists that get built when it opens, but it doesn't seem to populate them. If I close my first screen and this one, then open this screen, it works fine. I do have some "Global" variables that we're using that may be causing the issue. THey worked fine in the days of 6i but conflicting now in 10g when multiple screens are opened.
    I was wondering if there was a solution to get around this, or there is a config file that I could change that would resolve this.
    Any help is much appreciated. Thank you in advance.
    Chris

    Hi,
    We have just run it through with the same patchset for the installer. This is a clean install of Win OS and installed the 10g database first.
    We receive the following error when installing the App Server (Forms & Reports)
    *"Output generated from configuration assistant "Application Server Control Configuration Assistant":*
    *Oracle Enterprise Manager 10g Application Server Control Release 10.1.2.0.2*
    *Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.*
    *http://200810G.[hostname]:18100/emd/console/aboutApplication*
    *Starting Oracle Enterprise Manager 10g Application Server Control ..The Oracleoracleas1ASControl service is starting*
    *The Oracleoracleas1ASControl service could not be started.*
    *A service specific error occurred: 2.*
    *More help is available by typing NET HELPMSG 3547.*
    *Configuration assistant "Application Server Control Configuration Assistant" failed"*
    When we type NET HELPMSG 3547 (as suggested), we receive the following error message:
    *"A service specifig error occurred: ***."*
    Are you running Windows Server 2008 (first release) or Windows Server 2008 R2?
    Any suggestions? I will try installing the App Server without installing the database now to see if that makes any difference.
    Thanks

  • Android Multiple Screens

    Hi,
    I was wondering if it is possible with Adobe air to allow for multiple screens in Android. I have a HTC Incredible and a Galaxy Nexus both of which support video out. Android currently only supports mirroring for Video out. I wanted to know if it would be possible for adobe air to recognize the video out of the device as an external display that use either a MHL HDMI Out (Galaxy Nexus) or Analog-Composite video out (HTC Incredible). To illustrate a scenario that would use this: let say the app is a gallery and has x amount of pictures. The user has a video out cable connected and is recognized as the second monitor. Once the user sees a picture they like they would click on the image. Once the image is clicked it is sent to the 2nd display (the video out of the Android device) so the picture is being displayed on the larger screen while the user is still free to browse the pictures. Is this in realm of Adobe Air capabilities? Or am I misinterpreting "Multiscreen Development"?
    Thanks,
    -Nick

    Hello,
    Anyone have information about this problem ? I have warning about hight resolution for tablet when I publish my application on Android Store ?
    Thanks for you help.

  • SRM 7.0 Multiple screen for singe document

    Hi Experts,
    In SRM 7.0 when I select an SC and click create confirmation button, a pop-up window gets open for the confirmation to be entered.
    At this stage, If I click the create confirmation button again on the parent screen a new window get open for confirmation.
    Now I am able to create 2 confirmation document for the same shopping cart with the same qty.
    Can this be avoided? Is it possible to get the parent screen inactive while working on the pop-up/child screen?
    Any better ideas/solution?
    Thanks,

    Hi,
    Please test with NetWeaver Portal Personalization - Work Protect Mode. Ther is an option Discard unsaved data (open page in same window). If it does not help I think ther is no easy way. BTW, my clients are very happy with multiple screen function and item copy&past function between screens.
    Regards,
    Masa

  • Can i have multiple screens on my mac book pro when connected to my iMac using a firewire cable?

    What do I need to have multiple screens when I connect my iMac to my Mac book

    You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • How do you get multiple screens on the iPad with iOS 5.1.1?

    How do you get multiple screens on the iPad with iOS 5.1.1? We just upgraded to iOS 5.1.1, and we see no way to be able to open multiple screens at once. Before, there was a small button in the upper portion of any window. That button would take you from a particular window to the place where multiple windows are open at once. Does it do it differently? Is there a special setting button that we have missed? Thanks!
    One more thing: We are only talking about Safari.

    Guitaristica-
    I don't think I've seen a way to have separate Safari screens visible at the same time.  The small thumbnails were deleted in one of the iOS updates, and replaced with a multiple "Tab" system.
    You can open an additional screen in a new "tab" by pressing and holding on a link until a new menu comes up.
    Fred

  • We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Thank you!

    We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Now that we are 2 upgrades behind, I'm getting little concerned.  Thank you!

    Oh, well that was a whole other kettle of fish:
    Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
    When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
    When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
    I didn't have to do anything with the iPhoto Libraries, that I can recall.
    I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

  • Call multiple screens from LSMw

    Hi
    i want to call multiple screens from lsmw
    I need to call a three transaction from LSMW wich are subzequent steps for data entry.
    1) first tcode to be called is eprodcust which creates some master data and using this master data and some fields of data creatd i need to call two more tcodes first iq01 to create meter and save then eg31 tcod to feed data.
    Please suggest where in lsmw can i give options for suc hscnerio and call of subsequent screens.
    regards
    Edited by: Prieti_V on Nov 8, 2011 8:28 PM

    Hi Priti ,
    we have few options to handle such cases , to avoid Locked Problems what you can do is
    -->write BDC program within LSMW to create installation ( this will be created within step of 11 Convert Data ).
    -->Based on the above BDC results ,run another BDC within LSMW to create Device.( this will be created within step of 11 Convert Data ).
    -->third BDC records , let SAP do it thru LSMW or can you do it convert data step itself.
    this approch needs lots of codes , so in worst case and if you dont want to break the loadings the follow this.
    *Better to find any BAPI which will do creation of installation ,devices
    regards
    Prabhu

  • Opening multiple screens in safari

    how do i open multiple screens using safari???

    Cmd-N on the keyboard opens a new window.
    Also, +File -> New Window+ from the menu bar does the same thing.
    You can also open a new tab in an existing window (click the plus sign or Cmd-T). Then click-hold on the tab and drag it outside the current window. A new window will open from the tab.

  • Using Multiple Screens

    Does anyone know if Premiere Elements 4.0 can be broken a part in components to use on multiple screens?

    It all depends what you're wanting to do, t.
    The quality of the output for both is indentical.
    If you're wanting to edit, add titles, effects, transitions, keyframe effects, add motion paths across pictures and create DVDs, either program will work.
    If you need embedded timelines, increased support for a wider range of media, broadcast functions for tuning color ranges and other professional features that I barely understand, you need Pro. And, if you plan to produce deep-level DVD menus, you may need Encore rather than Premiere Elements' basic DVD creator.
    So it's up to you. There are many professionals using Premiere Elements. So it's kind of like Photoshop Elements vs. the full version of Photoshop -- if you don't understand the differences, you can probably get along fine with the consumer version.
    As I've said, the quality of the results from the Elements and Pro versions are identical.

  • Manage multiple screens

    Hi there,
    i got a question concerning an example which was posted about managing multiple screens which Angela Caicedo posted on oracle blogs:
    https://blogs.oracle.com/acaicedo/entry/managing_multiple_screens_in_javafx1
    I got all working but one thing won´t work because of the first line:
         Group root = new Group();
           root.getChildren().addAll(mainContainer);
           Scene scene = new Scene(root);
           primaryStage.setScene(scene);
           primaryStage.show();
    Because all the screens get finally added to a Group they are not resizable. The main window could be resized but the content
    won´t because of the Group.
    I tried some things but without any luck.
    Could one point me plz to the correct direction
    Thy in advance
    Ingo

    I think you misunderstood my previous post.
    Replace
    Group group = new Group();
    group.getChildren().addAll(mainContainer);
    Scene scene = new Scene(group);
    with
    Scene scene = new Scene(mainContainer);

  • Multiple screens in an MIDP client

    Hi,
    I've just started working with J2ME and everything involved with it. I bought a book called core j2me published by sun. It explains a lot of things, but its also left me with a few questions. I want to make an extremely efficient well coded program. things im confused about are as follows:
    1) is it possible to (after generating each screen) move back and forth between them) without halting or errors.
    2) is it possible, that when creating a new displayable object, instead of text at the very top, could there be an image. for example:
    fm1 = new Form ("this bit of text i'd like to show an image");
    3) i've seen examples with images, but considering programs are jarred after compilation is there any way of including the file within the jar and it being successfully able to be read?
    thanks in advance,
    j2meBhoy

    to your question 1: Yes it is possible to handle multiple screens in j2me, but it depends for which device you are writing the programme, It is very memory consuming and we know small devices are always low in that. You just swap your screens using display.setCurrent(yourScreen);
    asn for q2: You can not put an image on the top of a form, but you could achive this using Canvas, just draw all your images where ever you wish, I wud recomend you to use Canvas instead of Form to do image drawing and all stuff, it is mainly used for game programming and all.
    ans for q3: Yes you make a folder called images and put the folder inside your jar, or you just can directly place your images near your class files, but i wud not recomend you to do this.
    hope it solves your queries...
    cheers
    Manas

  • Multiple screens for my nokia 5800 like N8

    Hi,
    I am using Nokia 5800, but I am really impressed with N8's three screen which comes with Symbian 3 OS.
    Is there any way that we can upgrade Nokia 5800's S52 OS to Symbian 3 OS??
    Because I wanted to have three screen combo..Its great thing we have got into N8..which I can not afford now. I don't prefer to use applications like GDesk for multiple screens.
    Rather I would be happy if we can have upgrade for symbian OS...
    Please advice!!
    Thanks,
    Sanjay

    Not possible the way you want but you may try SPB Mobile Shell
    http://store.ovi.com/content/61716?clickSource=search
    ..and upgrade it if you like..
    --------------------------------------------------​--------------------------------------------------------​--------------------------------------------------​--If you find this helpful, pl. hit the White Star in Green Box...

  • Multiple screens in scenebuilder

    All we have a large application that we want to port to scenebuilder from java classes. Our issue is that when we call load on the mainView.fxml file it is the loading all the of the subscreens. They each have their own controllers and from the main controller we can't get access to their view components. Has anyone got any ideas on how to load multiple screens and not double load the views.

    Could you please elaborate a bit more ? What is the content of your mainView.fxml ? Does it include other fxml files ?

  • Multiple screens in one frame

    Hi all,
    I'd like to know how to be able to display multiple screens within one frame. Depending on the choice made on the first screen, the second screen should be either "View Default" or "Modify Default." The modifying will involve a number of other screens.
    One idea is to group by Panel and control panels. Any better idea?
    Regards,
    Omer

    Do you mean multiple displays in one frame? If so, you have several options. With JTabbedPane you could dynamically add new views to the frame, with the disadvantage of only being able to see one at a time. JSplitPane allows you to nest various views within one frame, though has the disadvantage of having extremely complex display logic when several split panes are displayed at the same time, and of displaying all displayed panes simultaneously.
    Perhaps the best possibility is to use JDesktopPane, within which you can insert as many JInternalFrames as you want.

Maybe you are looking for