Multiple Shipping Point in One Plant

Hello.
How to decide if we create another shipping point or not.
We have two warehouses, located far from each other.
The design is to have just one plant, and create two storage locations.
Should I make two shipping points for each warehouse and assign to just one plant?
Share you ideas...
Thank you,

Dear Deriada Gemma
Shipping point requirement is based on physical locations from which shipment is done, in case you are using Logistic execution then based on shipping point shippings will be done.
If you have two wh and want to create seperate deliveries for both wh use two seperate shipping points
you can automatically determine based on plant, loading group and shipping condtion.
from help you will find few other reason for which seperate shipping point decision can be made
list list, printing ...etc
Define, copy, delete, check shipping point
In this step, you define the shipping points in your company or edit
    shipping points that already exist. In order to adapt the functional
    scope of a shipping point to the organization in your company, you
    should process the following check list:
o   The shipping point is the top level in the organization for
        shipping.
o   A shipping point can be allocated to several plants.
o   A shipping point can be divided into several loading points.
o   A delivery is always initiated from exactly one shipping point.
        Thus, all items of a delivery belong to one shipping point. Groups
        of deliveries also belong to exactly one shipping point.
o   You can influence delivery scheduling via allocation to departure
        zones.
o   The shipping point can be proposed automatically during order
        processing depending on the plant, loading group and shipping
        condition.
o   A shipping point has an address.
o   The shipping point is used as a selection criterion for lists of
        deliveries and the work list deliveries.
o   The shipping point is used as a selection criterion for processing
        deliveries like printing, picking or goods issue.
o   You can determine the printer destination for messages differently
        for every shipping point on account of shipping documents.
Regards
Jitesh

Similar Messages

Pros/Cons of multiple shipping points

Are there specific pros or cons to having multiple shipping points for the same physical shipping location? I know that loading points can be used to differentiate different types of loading but are there any examples or pros/cons for why you would or wouldn't want multiple shipping points for the same physical location?
I know SAP doesn't prevent you from creating as many as are wanted, but I'm interested more in the business process or user impact.

Maderas,
Multiple shipping points can have many purposes, but one purpose that I am aware of and that is currently applied at my company is for determining types of shipments. For example, in plant "X" let's say that there are 3 shipping points:
X1 - large orders, require 3 days of pick/pack time
X2 - medium orders, require 2 days of pick/pack time
X3 - small orders, typically rush orders, require same day pick/pack time
You can set up your delivery batch jobs to print these different types of orders. For example, you can have X1 batch job to run 1x a day very early in the morning so that pick/packers have large orders to work on and you can have batch jobs for X3 orders to run 6x per hour near the end of the day to accommodate your rush customers.
I hope this information is helpful.

2LIS_12_VCITM populates the same Shipping Point and Receiving Plant

Hi Gurus,
We are using 2LIS_12_VCITM extractor which answers all delivery-related requirements. However when I checked the data in RSA3, Shipping Point and Receiving Plant are the same. So I checked some sample deliveries in table LIKP and it shows the correct shipping point and receiving plant (which are different to each other). I checked VL03N and table LIKP is giving the correct shipping points and receiving plants. Receiving Plant or LIKP-WERKS and Shipping Point or LIKP-VSTEL. My question is how this happened? Consequently, when I initialized in BW, shipping point and receiving plants are the same which should not be.
Thanks for all the help.

The data for the 2LIS_12_VCITM is not just sourced by LIKP (Delivery Header), but by LIPS (Delivery Item) too.
Plant, in this extractor, is sourced by LIPS-WERKS instead of LIKP-WERKS. The receiving plant is LIPS-UMWRK. If you require this data, you will have to enhance the structure and create the User Exit code in tcode CMOD to extract that particular data.

Shipping Point Assignment to Plant

Hi,
Can anyone tell me the T Code to assign Shipping point to plant.
Though. I have defined plant in Enterprise Structure, when i go the assignments and try to do this assignment there is only the standard plant appering in the structure and hence am not able to assign the Shipping point for my plant.Am working on ECC 5.0
Regards,
Tommy

Hello Tommy,
Shipping point to plant assignment T Code : OVXC
Shipping point determination path:
spro>logistic execution>shipping>basic shipping function>shipping point & goods receiving point determination-->assign shipping point
Reward if helpful.
Regards,
Priyanka
Message was edited by:
Priyanka Dixit

Delete Shipping point assignment with plant

In my current system there are a lot of shipping points assigned to Plants. It is taking a lot of time to delete them. Is there any easier way to delete all these assigments in bulk? Please let me know if there is any report that I can run inorder to delete them.
Thank you,
Ravi

GO TO SPRO -> Enterprises structure -> Assignment -> Logestic Execution -> assign shipping point to site then search for plant and delet the shipping point which you don't want to keep,
and
SPRO -> Logestic Execution -> SHIPPING -> assign shipping point and delet the shiping points from shipping point determination
Regards,

Assign multiple shipping points to multiple tranportation zones?

Hi All,
I have a requirement according to which more than one shipping point is to be assigned to more than one transportation zone(destination zones). I dont see that option in the spro screen. can anyone tell me how can this be done?
Thanks & Regards/Aryan

Hi Aryan,
A shipping point has one departure zone in its location data.
It doesn't need to be assigned to destination zone. Check out: IMG -> SD -> BF -> Routes -> Route determination->Maintain Country And Transportation Zone For Shipping Points
If you have interest in Route determination, the route is proposed in order per config:
departure Zone(from shipping point) + destination zone(CMR) + transportation group (MMR) + shipping condition
What one needs to do is to build links between DepZones and DestZones according to customer needs and services of shipping agencies, then shipping points located in that Departure Zones can deliver goods to specified destinations. Hope that's what is asked.
Regards

Multiple shipping points.

Hi experts,
i got a problem in shipping point determination.
here shipping condition / loading group / plant are same but have 2 different shipping point..
not able to give both shipping point here .if i give one shipping point in this determination ..only the same will come in sales order.
i want an option in sales order from which i can choose one shipping point from multiple option can v do that?
waiting for the reply
-Jay

Hi,
The shipping point i s determined with the combination of plant, loading group and Shipping condition. Since in your scenario all are same there can be only one shipping point assigned automatically (manual entries can be maintained)
Any how you can also try the option of asiggning shipping point with the combination od plant/loading group/storage condition and Storage location.
SPRO --> logistics execution --> shipping --> basic shipping funct --> shipping point and goods receiving point det --> set up storage location dependent shippping point determination
Steps
1. Assign the Shipping point determination rule as Storage location specific for the required delivery types.
2. Assign the shipping point to the combination of plant / loading group / storage condition / Storage location
Hope this helps you.
Thanks,
arun.S
Edited by: arun subramani on Jul 27, 2011 7:27 AM

Assign Multiple Sales Org for One Plant in STO process

Hi Experts,
Aware that I can assign multiple sales org to 1 plant (relationship: many to many).
I am trying to create STOs to supplying plant and assigning them to different sales organization but encountered problem.
Example:
Supplying Plant 1000 - Sales Org 1000A (food) and 1000B (apparel)
Receiving Plant 1100
Plant 1100 wants to issue 2 STOs to Plant 1000 - 1 for each Sales Org (for instance STO1 to food division, and STO2 for apparel division).
However, when I tried creating STO in the system, noticed that in the shipping tab (item details) the sales org, DC has been assigned to 1 particular assignment and data is locked.
Tried to get into SPRO to configure and define the shipping data for plants but noticed that it's 1 to 1 relationship (SPRO - IMG - MM - PO - Set up Stock Transport Order - Define Shipping Data).
How can this be done?

You can set different sales areas (~sales organisation) for one plant in SAP - based on issuing SLoc provided STO between storage locations is activated.
SPRO > Materials Management > Purchasing > Purchase Order > Set up Stock Transport Order > Set Up Stock Transfer Between Storage Locations > Define Shipping Data for Stock Transfers Between Storage Locations
Edited by: Csaba Szommer on Jul 2, 2011 6:14 PM

Creat Shipping point configuration for plant

Hi
I want create shipping point for plant XYZ.
I need to create shipping point, so that I can maintain country and Transportation zone for the same.
Request you please tell me where i can configure in IMG?
What is the step by step process for setting shippong point for anty plant ?
Vicky

Hi Vicky,
Shipping Point Configuration:
1) SPRO->Enterprise Structure->Definition->Logistics Execution->Define, copy, delete, check shipping point... for Defining the Shipping Point
2)SPRO->Enterprise Structure->Assignment->Logistics Execution->Assign shipping point to plant... for linking Shipping Point with Plant.
3)SPRO->Logistics Execution ->Shipping->Basic Shipping Functions->Shipping Point and Goods Receiving Point Determination->
             ->Define Shipping Conditions
             ->Define Loading Groups
             -> Assign Shipping Points ........ here you enter the combination of Shipping Condition, Loading Group, Plant for determing the Shipping Point which can be one default and many manual.
Regards,
Karthik

Multiple Shipping Point Determination required?

Dear all,
Assuming there is a plant (XYZ), where only one shipping point (ABC) is assigned in the shipping point-plant assignment (i.e. XYZ-ABC).
In the shipping point determination, where formula is: Shipping condition + Loading Group + Plant = Proposed Shipping Point
There is 5 different loading groups (i.e. 1,2,3,4,5).
Shipping condition = Standard (01)
If I want to use the same shipping point (ABC) assigned to the plant XYZ for all loading group combination, is it possible?
Example:
1. 01 + 1 + XYZ = ABC
2. 01 + 2 + XYZ = ABC
3. 01 + 3 + XYZ = ABC
What are the implications?
Pls enlighten.
THanks..
Rgds.

Dear PKW,
As you have mentioned that Shipping point determination :
Shipping Conditions(Customer Master data)
Loading Group(Materail Master data)
Delivering Plant(CMIR or Customer Master data).
Whenever you defined the different combinations of above in Shipping point determination, the system proposed shipping point you have maintained.
So you can get the Shipping point you defined.
If you have any concerns revert back the same
With Regards
Amjath

Multiple click points for one button and movie clip

I am trying to make a single button into a multiple click
point. I have a movie clip on the stage and I have an invisible
button over it. The movie clip consists of a single timeline that
has an ambient animation running and looping intially. I have three
more labeled sections of that timeline that each contain a
different animated sequence as click point animations for that
movie clip. I want the user to click on the button on the stage and
the first labeled click point animation of that movie clip will
play. I want that action to be stored so that when the user clicks
again then the second labeled click point animation will play then
they will click for the third in the same way. In between user
clicks I want the ambient animation loop in the beginning of that
movie clip timeline to play. When the user has clicked the 3rd and
last animated sequence then the whole thing will reset and be
available again. Can anyone let me know how that can be
accomplished. I originally scripted it through tell target to play
the first but I don't know how to move forward. Thanks!

What version of Flash are you using? Telltarget is very
old... try something like this:
// array of the animations
myAnims = ['firstAnim','secondAnim','thirdAnim']; // these
are also frame labels
// your current animation index in the array, arrays start at
0,
// so we start at -1 which is like before anything
currAnim = -1;
// function to play the next animation
function nextAnim(){
// add one to the current animation index
currAnim++;
// if you've reached the end of the array, start back at 0
if(currAnim >= myAnims.length)currAnim = 0;
// now tell the MovieClip to play based on the value of the
current array index
myMovieClip.gotoAndPlay(myAnims[currAnim]);
Then on the button you just put:
on(release){
nextAnim();
And at the end of each animation on the timeline, put:
gotoAndPlay(1);
And at the end of the ambient loop at the beginning I guess
you have that, too, so it loops.
Hope that helps

OVXC - Shipping Point assignment to plant problem

Dear Gurus,
I have created a shipping point called: BER1 in EC02
When I want to assign it to my plant which I created earlier with the same name BER1 in OVXC, the system can't find the plant.
How is that possible when both structural objects have been created?
Please help.
Kind regards
Christian

Hi There,
I had attached the plant to the company code OK.
However I forgot to assign the plant to: Sales Organization + Distribution Channel
How stupid have I been...
Many thanks for your input anyway.
Kind regards
Chris

Multiple location planning under one plant

Hi,
under one plant i have maintain two location ,i am creating production order in location one for that i am selecting item from second location,so at the time of release of order one error comes *at header level warehouse location is different from line level warehouse location.*
Thanks
Parag

Based on the error message, you production order has to be in the same location by system design. May I ask what location have you defined. Locations refer to geographical remote area like different cities. How could you produce something from faraway?
Thanks,
Gordon

Multiple domains pointing to one domain. How best for SEO?

I'm a therapist. I have just created a site eg mytherpaystudio.com I own several domains (currently as individual websites) ie thistherapy.com, thattherapy.com and anothertherapy.com etc. I think I made a big mistake when I created these websites because they are basically clones of each other, which I have learned through reading Google webmaster info etc may well have created SEO problems ie penalised me. I'm revamping the whole thing because I have a new therapy studio - massage, counselling, movement therpist etc
Would I be best:
Deleting the whole content and just pointing the domain name to the therapystudio.com site, or
Only leaving content on the websitess which only pertains to the theraspy type ie thistherapy information, othertherapy information and using hyperlinks and text links to the mytherapystudio site?, or
Anyone have another suggestion altogether
Obviously I want the best possible seo outcome. I've stuck with iweb. I use RAGE iweb seo tool and sitemap automator.
Thanks in advance for help

I am a therapist as well and from my own experiences, I think you might be better forwarding the other domain names to the new therapy centre website.
I did the same as you at one time, thinking that more sites might be better, but then decided that I would be better cutting down, so I tried a little re-branding of my practice and purchased a new domain name and just have 2 websites that advertise what I am doing - namely Structural Integration/Rolfing and Orthopaedic/Sports Massage and Rossiter System.
I have to say though that when I re-designed the 2 websites, I ditched iWeb and one site I re-built using EverWeb (http://www.everwebapp.com), which is a good alternative to the now unsupported iWeb and for the other site I used Joomla, which is one of the Content Management Systems.
The more sites and domain names you have, you more you have to get found, but I then found that I was losing track of what I did have. As well as my now 2 websites and domain names I also make use of the free website building facilities by using WordPress.com, where you can set up a free website and publish to the WordPress severs and sometimes Wix - in this respect, the more you have the more you will be found.
Good luck with it.

Multiple webgates pointing to one access gate entry in OAM

Can we install webgates on multiple boxes and point to same access gate entry in OAM.
Are there any issues with this kind of configuration?
Any opinion?

Hi,
It is technically possible to do this, and makes sense when all the WebGates are logically the same (for example, they all reside on instances of load balanced web servers).
When the WebGates reside on logically different web servers, then it will be more difficult to have different policies protecting similarly named resources on the different web server. For example,eg you may want to protect /admin differently on the different web servers, and you will not be able to use Preferred HTTP Host to achieve this when they share the same AccessGate definition. Also, you will not be able to set different timeouts on the different WebGates, or have different settings for such things as IPValidation or cookie domains.
Regards,
Colin

Multiple Shipping Point in One Plant

Similar Messages

Maybe you are looking for