Multiple targets for a same interface

Hi,
I am having a scenario that, a single source table should be mapped to two target oracle tables.
Is the only way is to create two interfaces. Cant we have the same interface in which two target tables are assigned?
Thanks in Advance,
Ram Mohan T.

A single interface targets only a single table/datastore.
If you are having to load the data from an external source, and load into two tables, an approach is to separate the load and integration phases. Have one interface load the data into a temporary table in the work schema, then two interfaces which read that data and load it into your target tables. (You could also use only two interfaces, where you set the integration KM option to DELETE_TEMPORARY_OBJECTS in the first to no, and read the loading table created there in the first interface as the source for your second interface). I prefer the 3 interface option, it ends up being cleaner and clearer.

Similar Messages

  • Stetting up FTP and SFTP adapters for the same interface

    Experts-
    I have a situation in which client has a requirement to setup both FTP and SFTP adapters (from adapetive adapters) for the same interface. They want to have a copy of file locally and also want a file to be sent out securly using SFTP. In my interface which was previously developed they have used one business system and added FTP and SFTP to the same. If try to add new Receiver Agreement it will say that the object already exists as the Interface Mapping is same.
    Please send me any suggestions which would resolve my problem

    Hi Hari,
    As you cannot create two Receiver agreement using only one receiver interface , please create a new receiver Interface, add that in interface determination step and then assing a different channel to new receiver agreement.
    If your requirement is to store the file ,i would suggest write the file in your unix directory using NFS( /usr/sap...). then run a AFT job (if already set up in your landscape) to transfer file securly to target destination.Not sure if its feasible in your case otherwise you can use  SFTP for the secure transfer.
    Best Regards
    Srinivas

  • WebTools Creating multiple users for the same User

    I had to make a few changes to a BP in SAP which will synch back into WebTools but now I am getting multiple users for the same contact. For example my user is cspehar_1 now in Webtools there are cspehar_1, cspehar_2, cspehar_3 and so on up to _8.
    This is occuring for several users in webtools.
    What causes this and how do I fix it?
    Thanks,
    Craig Spehar

    Hi Craig,
    There are two ways to cause this that I am aware of:
    1.  Change the "Business Partner Synch Contacts Field" setting after the initial synch.
    2.  Change the Web UserID on the BP contact in B1 (OCPR.U_PRX_SID).
    After that, update the user in WT  and synch. (might also happen if  you update the BP in B1)
    Since the synch is using the OCPR.U_PRX_SID to identify the contact, it will not be able to find it in B1 if the U_PRX_SID has changed.  When it does not find it, it assumes it needs to be created.  This results in a duplicate.
    The solution is to reset the U_PRX_SID back to what it was or set the synch contact field back to what it was.
    Then delete the last created duplicate contact from B1.
    There may be further data corruption issues here.  If orders/quotes/opportunities or other dependant data has synchronized referencing the duplicate user, these data will need to be correct as well.
    FYI, whatever caused this was probably at the root of your order problem as well.

  • Multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table.

    Hi,
    Did anyone came across this issue!! I am triggering the config engine from back and and trying to pick up a model but it has multiple devl_project_id's. :(
    I could see multiple DEVL_PROJECT_ID for the same model in CZ_DEVL_PROJECTS Table. Apart from DEVL_PROJECT_ID and created_by_date every thing looks the same.
    Below are the 2 records the data from the table
    select * from CZ.CZ_DEVL_PROJECTS where product_key = '122:17056' and DEVL_PROJECT_ID in (12943,15321)
    DEVL_PROJECT_ID     NAME     ORIG_SYS_REF     CREATION_DATE     LAST_UPDATE_DATE     PERSISTENT_PROJECT_ID     MODEL_TYPE
    12943     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/18/2012 10:01     12/18/2012 10:01     11100     A
    PRODUCT_KEY     ORGANIZATION_ID     INVENTORY_ITEM_ID     BOM_CAPTION_RULE_ID     NONBOM_CAPTION_RULE_ID
    122:17056     122     17056     802     801
    15321     ASI XXX MODEL(122 17056)     OPTIONAL:122:17056     12/26/2012 23:10     12/26/2012 23:10     11100     A     
    122:17056     122     17056     802     801
    Thanks in advance,
    -vijay

    It can be possible to have multiple devl_project_id for the same model in cz_devl_projects Table.
    Case -1 : When you delete the existing model and re-import again.
    case 2:
    When you publish the model locally, it will create the same copy of the record with different devl_project_id, creation_date, last update_date etc..\
    You can see that for published records the last_updat_login, checkout_user will be null and for the original model, last_update_login,checkout_user (if model is locked) will not be null.
    -Murali
    Edited by: 907569 on Jan 8, 2013 10:55 AM

  • Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

    Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
    the incorrect entry? Adobe installed a very quick update today.

    They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
    You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
    * Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''<u>may</u>''' need to update)
    * Shockwave Flash 10.1 r53
    * Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    #Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Shockwave for Director'''
    #*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
    #*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
    #*When the download is complete, exit Firefox (File > Exit)
    #*locate and double-click in the installer you just downloaded, let the install complete.
    #*Restart Firefox and check your plugins again.
    #*'''<u>Download link and more information</u>''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
    #'''Update Shockwave Flash'''
    #*Use Firefox to Download and SAVE to your hard drive from the link in article below
    #*SAVE to your Desktop so you can find it
    #*After download completes, close Firefox
    #*Click on the file you just downloaded and install
    #**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
    #**Note: Most browsers other than IE will also get updated with this one download
    #**Note: To update IE, same procedure '''<u>but use IE</u>''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
    #*After installation, restart Firefox and check your version again.
    #*'''<u>Download link and other information</u>''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
    #* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
    #* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
    #'''Update Java:'''
    #* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

  • Multiple KPI for the same Initative or Perspective

    Hi all,
         Here we are facing a problem with a customer BSC model that we need to adapt to SAP SSM
       The customer has the following  BSC structure ":
       1)  Multiple KPIs for ONE Perspective ( in SSM the maximum that we have it is a Perpective related to one KPI )
       2)  Multiple KPIs for an Objective ( Ok, SSM  is OKJ in this point )
       3)  Multiple KPIs for an Initiative ( in this customer they use a Initiative as a lower level of the Objective )
           ( in SSM a Initiative is associated only with one KPI if necessary )
       As we can see the itens 1 and 3 I see a limitation to adopt in SSM cause SSM  does not provide a n for n relationship ( Multiple KPIs for One Perspective and
         Multiples KPIs for a same Initiative )
       Does somebody knows how can I solve this kind of SAP SSM tool limitation ?
       Regards,
          Alfred

    Alfred,
    Index KPIs is going to be the solution for each of these questions.
    1) Multiple KPIs for ONE Perspective ( in SSM the maximum that we have it is a Perpective related to one KPI )
    SSM is set up in a hierarchical structure, so that the assumption is that KPIs drive Objectives and Objectives drive the status of the Perspectives. If you have multiple KPIs that are going to drive the status of a Perspective, you would have to create an INDEX KPI in Set KPIs. Then you can assign that KPI as the status driver for your Perspective.
    2) Multiple KPIs for an Objective ( Ok, SSM is OKJ in this point )
    Index KPIs need to be created.
    3) Multiple KPIs for an Initiative ( in this customer they use a Initiative as a lower level of the Objective )
    Initiatives are set to be tied to Perspectives and Objectives and you have the option of setting a Status for that Initiative based on a KPI. Again, you can create an Index KPI if you need multiple KPIs to drive the status of an Initiative
    The reason that you have to create these in Set KPIs and then assign that Index KPI to Perspectives and Initiatives is that you need to use that Set KPIs area to set and define the relationships and relative values of the combined KPIs.
    Regards,
    Bob

  • Multiple alerts for the same Message ID

    Hi
    I have configured outbound ftp adapter. I have configured alerts inorder to capture any error in the adapter engine.
    Now,alert is triggered showing an error in the ftp adapter ( say incorrect ftp details). But i get multiple alerts for the same message ID several times. I have also set the parameter Max No od Delvs to 1 in the ALRTCATDEF transaction.
    I keep getting the same alert number of times a day. How can i restrict the number of alerts to 1 for 1 message ID.
    Regards,
    Vani

    Hello Andreas,
    Thanks for your reply.
    In my scenario i would need an alert per Message. That is the reason why I have not checked the option "Supress Multiple Alerts" since it would allow only alert per rule.
    Is there is any way we can get one alert per message.
    Also, after correcting the eror in the file adapter will the file which was not placed due to error in the adapter be placed automatically. I wanted to know what would happen to the lost file or unprocessed file since it dint reach the destination due to error.
    Regards,
    Vani

  • Multiple HighlightPainters for the same JEditorPane

    Hey Everyone,
    I'm having a problem having highligts of multiple colors for the same text component.
    Basically I have a set of results in a separate panel for a search on the text in a JEditorPane. I want the text corresponding to all the search results to be highlighted one color as soon as the search is done, and when one specific search result is clicked on, have the highlight for that result's text change to a different color.
    My current implementation is trying to do this by setting highlights for all the search results, and then when a result is clicked on, setting another highlight with another highlight painter of a different color. Unfortunately, this causes only the second higlight color to be displayed, even though when I look at the editorpane's highlights i can see all of them are being stored.
    Is there something I'm misunderstanding about Highlights?
    Thanks for any help,
    Phil.

    This example shows some ways of playing with attributes and highlights:
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.text.*;
    public class TextPaneAttributes extends JFrame
         JTextPane textPane;
         JScrollPane scrollPane;
         Highlighter.HighlightPainter cyanPainter;
         Highlighter.HighlightPainter redPainter;
         public TextPaneAttributes()
              textPane = new JTextPane();
              textPane.setMargin( new Insets(20, 20, 20, 20) );
              StyledDocument doc = textPane.getStyledDocument();
              DefaultHighlighter highlighter = (DefaultHighlighter)textPane.getHighlighter();
              cyanPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.cyan );
              redPainter = new DefaultHighlighter.DefaultHighlightPainter( Color.red );
              //  Set alignment to be centered for all paragraphs
              MutableAttributeSet standard = new SimpleAttributeSet();
              StyleConstants.setAlignment(standard, StyleConstants.ALIGN_CENTER);
              doc.setParagraphAttributes(0, 0, standard, true);
              //  Define a keyword attribute
              MutableAttributeSet keyWord = new SimpleAttributeSet();
              StyleConstants.setForeground(keyWord, Color.red);
              StyleConstants.setFontSize(keyWord, 24);
              StyleConstants.setStrikeThrough(keyWord, true);
              //  Define superscript attribute
              MutableAttributeSet superscript = new SimpleAttributeSet();
              StyleConstants.setSuperscript(superscript, true);
              //  Add initial text
              textPane.setText( "one\ntwo\nthree \nfour\nfive\nsix\nseven\neight\n" );
              //  Change attributes on some keywords
              doc.setCharacterAttributes(0, 3, keyWord, false);
              doc.setCharacterAttributes(20, 4, keyWord, false);
              //  Highlight some text
              try
                   textPane.getHighlighter().addHighlight( 4, 7, cyanPainter );
                   textPane.getHighlighter().addHighlight( 25, 28, cyanPainter );
                   textPane.getHighlighter().addHighlight( 35, 40, cyanPainter );
                   textPane.getHighlighter().addHighlight( 15, 20, redPainter );
              catch(BadLocationException ble) {}
              //  Add some text
              try
                   doc.insertString(0, "Start of text\n", null );
                   doc.insertString(doc.getLength(), "End of text\n", keyWord );
                   doc.insertString(doc.getLength(), "2", null );
                   doc.insertString(doc.getLength(), "1", superscript );
              catch(Exception e) {}
              //  Add text pane to frame
              scrollPane = new JScrollPane( textPane );
              scrollPane.setPreferredSize( new Dimension( 200, 200 ) );
    //          scrollPane.setComponentOrientation(ComponentOrientation.RIGHT_TO_LEFT);
              getContentPane().add( scrollPane );
              //  Create a Button panel
              JPanel buttons = new JPanel();
              getContentPane().add(buttons, BorderLayout.SOUTH);
              //  Add a Bold button
              JButton bold = new JButton( new StyledEditorKit.BoldAction() );
              buttons.add( bold );
              //  Add Right Alignment button
              JButton right = new JButton( new StyledEditorKit.AlignmentAction("Align Right", StyleConstants.ALIGN_RIGHT) );
              buttons.add( right );
              //  Add Remove Highlight button
              JButton remove = new JButton("Remove Highlight");
              buttons.add( remove );
              remove.addActionListener( new ActionListener()
                   public void actionPerformed(ActionEvent e)
                        int offset = textPane.getSelectionStart();
                        Highlighter.Highlight[] highlights = textPane.getHighlighter().getHighlights();
                        for (int i = 0; i < highlights.length; i++)
                             Highlighter.Highlight h = highlights;
                             DefaultHighlighter.DefaultHighlightPainter thePainter =
                                  (DefaultHighlighter.DefaultHighlightPainter)h.getPainter();
                             if (offset >= h.getStartOffset()
                             && offset <= h.getEndOffset())
                                  textPane.getHighlighter().removeHighlight(h);
         public static void main(String[] args)
              TextPaneAttributes frame = new TextPaneAttributes();
              frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
              frame.pack();
              frame.setVisible(true);

  • How to avoid multiple session for the same username

    I need suggestions on implementing single user login , like My system has a user with a username jdavid and my application should not allow two different sessions for the same username jdavid , can one session peep into all other session
    to see if the any has a usernaem jdavid, I am basically looking for some pattern if any available for restricting multiple session for the same username . like jaas or any other security api provides this ?

    Store a Map<User, HttpSession> in application scope and let your application intercept on that. On login, just check if the User is already there, then get the associated HttpSession, invalidate it and replace it by the current HttpSession, else just store the current User-HttpSession pair in the map. On logout obviously remove the User-HttpSession pair from the map.

  • Multiple Faces for the same person

    I found this unanswered archived post, which is expressing exactly the same problem I'm having...
    http://discussions.apple.com/thread.jspa?threadID=2099862
    When tagging photos there are multiple entries for the same person listed. In particular for three people (my kids) who have a lot of photos for each person. On the Cork board there is only one entry per person, so this is not a multiple face entry there.
    I was living with this for a while, but now I have my iPhone and can sync faces photos with it, I can see again there are multiple entries listed for these three people, yet there's nothing I can do in iPhoto to consolidate them.
    Has anyone else come across this (like the person in the above thread - which didn't get answered) and found a solution to fix up iPhoto? Clearly it's something odd going on in the Faces database thinking there are different entries tagged, but is still showing them together in the Cork Board.

    I would like to know how you got the multiple entries to appear. I'm having the same problem with my daughter. The only issue is, she is two and does not have any address book entries. I think I may have typed her name out several times when adding her name to a face instead of associating the photo with the existing entry. iPhoto recognizes they are the same places in some places, but not in others. I started a new post...
    http://discussions.apple.com/thread.jspa?threadID=2319735&tstart=0

  • Multiple address for the same customer code

    Hi,
    Suppose we have a customer name XYZ LTD whose sap code is 123.
    Now user want to maintain multiple addresses for the same customer in the same code.So that during billing he can have option to chose one of the address in which he want to sent the invoice.
    Is it posible if yes then let me know.
    Thanks in advance.
    Regards,
    SATYA

    Hi Satya,
    you can define for a vendor/customer several partner functions with different        
    adresses. You can create certain partner roles several times.               
    If you create a purchase order, than you can choose the wanted              
    address and partnerrole on the header level. In the standard system you     
    can use the patner role 'OA' ordering address and for the finance           
    the 'IP' Invoice presented by.
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • Multiple Partners for the same customer in Message tracking of SEEBURGER

    Hi,
    This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
    12345_INVOIC02
    34567_INVOIC02
    45678_INVOIC02

    Hi Satya,
    you can define for a vendor/customer several partner functions with different        
    adresses. You can create certain partner roles several times.               
    If you create a purchase order, than you can choose the wanted              
    address and partnerrole on the header level. In the standard system you     
    can use the patner role 'OA' ordering address and for the finance           
    the 'IP' Invoice presented by.
    I hope I was able to help you.
    Kind regards,
    Zsuzsanna

  • I want to create a mail merge for address labels into a table, but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address.

    ...but when I fill a table with merge fields, it ends up creating multiple entries for the same address, rather than one table full of each address. Please help.
    Thanks!

    That is a quirk of Pagesthat  it applies only one record per page.
    There is a way around this:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=245&highlight=labels &mforum=iworktipsntrick
    Peter

  • Events cannot have multiple exceptions for the same date

    I just starting getting this message and could not sync to one of my Google calendars. I'm posting this for others who might get the same problem.
    I didn't find the answer on these forums but did find it on this thread on Google:
    http://www.google.com/support/forum/p/Calendar/thread?tid=241155f758d9e2a4&hl=en
    Here's the important excerpt:
    "I had a client, who just had this same issue, nothing to do with Google cals.
    It was apparently, in my best guess, a corruption of the subscribed cal.
    *I did a get info on the cal, copied the URL, deleted the cal, then re-subscribed to it by pasting in the URL, and now it's working fine*."

    I've been having the same problem with my iCal calendars and the "Events cannot have multiple exceptions for the same date" error. Once it gets going, it uses up a lot of the CPU and resources. After reinstalling iCal, all my calendars were missing and I could not even resubscribe to them.
    I took my MacBook Pro to the Apple Store, and they were able to solve the problem by moving some of the iCal files from their existing folders out to the desktop, and reopening the program. That got it working, however, now I'm having the same problem again. So back to square one. Anyone else having this issue and know the cause?
    My setup is my MacBook Pro uses Entourage, use that calendar in my iCal. And I subscribe to two calendars my wife publishes on her Macbook. We're both using Snow Leopard.

  • Multiple entries for the same company.

    Anybody out there have any idea how to enter multiple entries for the same company in Mail without having to enter all information every time for each individual. This was a very basic feature in MS Outlook. Possibly a workaround if not an option within Mail? Thanks.

    Select a card with the details on it, and Edit/Copy /Edit/Paste (Command-C Command-V). Now edit one of the cards with the new individual's details. If starting from scratch, create a company card with no personal information and duplicate it as needed.
    AK

Maybe you are looking for