MultiProvider with two real-time InfoCubes?

Hi,
I created a multiprovider with two real-time Infocubes. I need to create a formula in FOX editor where I have to update only one InfoCube. Is it possible? If so, I am looking for syntax with InfoCube name in the formula. The KeyFigures have the same names in both InfoCubes.
Any help would be appreciated.
Thank you,
Vidya

Hi Pratyush,
I am using IP. I created Aggregation Level, Filter, etc. It created a characteristic "0INFOPROV" and I used that cha. to read data and to write the data. It did not work.
Here is the problem.
- We have one basic cube (history data: HCUBE) and two transactional cubes (actual data: ACUBE and plan data: PCUBE)
- Created a multiprovider (MULTI) for HCUBE, ACUBE, PCUBE
- Also created Agg level and filter
- Note: Three cubes have the same Key Figure (0Amount)
- Created a planning function and tried something like {KF, PCUBE} = {KF, MULTI} (as suggested by Andrey)
- Task is to read data from HCUBE and ACUBE and only write to PCUBE.
- I am able to read data but unable to write data.
Any ideas?
Thank you,
Vidya

Similar Messages

Problems with Creating Real-Time InfoCube in BI 7.0

Hello, Everybody,
I try to create Real-Time cube for BW-BPS planning, but when i want to insert a key figure into real-time info cube i get error:
Short dump has not been completely stored(too big)
Exception condition "Node_related_missing" raised.
Could You help me?
Thanks in advance,
Best Regards,
Arunas Stonys

Hi Arunas,
I think you are not on SP10. you may need to implement the SP10 or advance correction as in this note:
Note 968097 - Error in BI metadata maintenance (InfoCube, MultiProvider)
Symptom
Note that the attached corrections cause follow-up errors. You must also implement the corrections from Note 971918.
You are in the maintenance dialog for an InfoCube or a MultiProvider. When you enter new key figures in this provider, a program termination occurs with message "NODE_RELATED_MISSING" in class CL_RSO_DATA_TREE.
This problem occurs because the InfoProvider does not contain a unit dimension yet and the system tries to insert the relevant unit into the unit dimension (that does not exist).
Other terms
Transaction RSA1, RSDCUBE, RSDMPRO
Reason and Prerequisites
This problem is caused by a program error.
Solution
SAP NetWeaver 2004s BI
Import Support Package 10 for SAP NetWeaver 2004s BI (BI Patch 10 or SAPKW70010) into your BI system. The Support Package is available once Note 0914304 "SAPBINews BI 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Thanks,
Raj

How to copy data from a Input query to real time Infocube

Hi All, I need some help on IP related stuff. The details are as below:
I am using two real time infocubes and one Multiprovider on them.
First Infocube u2018PRODUCTu2019 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales
Second Infocube u2018C_PRODUCT u2018 with the following Objects:
Product Group ,Product,Region ,Fiscal Year , Fiscal Year Varient ,0currency
Gross Sales and Forecast Sales
( u2018Forecast Salesu2019 in the extra object in the second Infocube. Remaining objects are same in the both the cubes)
First Infocube u2018Productu2019 has data but the second cube does not have any data.
I have created a Multiprovider ZMulti and in that I have included these two cubes. On this Multi Provider, I have created a Aggrigation Level(The details of the aggregation level is provided in the next page).
On this Aggrigation level I have built a Input Query by which I run the report.
(In the Rows area, I have taken Product Group, Product, Region and Fical year.
In the Key Figure section, I have taken Gross Sales and Forecast Sales( which is part of the second Infocube C_Product). These two Key Figures are made Input as Input ready. And the Query is Input ready query. In the Filter, I have taken Fiscal Year Variant. )
Data available in the first cube and no data currently in the second cube. Now executed the report and report displayed information from the first cube.
EX:
Product     Product     Region          Year     Gross Sales     Forecast Sales
Group
PG01           Beer           North           2008           10000           u2026u2026u2026
PG01           Beer          South          2008          20000           u2026u2026u2026
PG01          Beer          East          2008          15000           u2026u2026u2026
The second column is empty and there is no data for the Forecast sales Key Figure in the column.
Things look OK till the above.
Now based on the Gross Sales, I am entering forecast Sales values and I need to save the entire record to the second cube.
For this in the report, I have given the Forecast sales values in the second column and right clicked the mouse and form the menu which I got, selected the u2018SAVEu2019 Option to save the data. For some time, I can see u2018Processingu2019 message and later values at u2018Forecast Salesu2019 are disappearing.
Data is not saving to the cube second cube.
====================================================
Am I missing any thing?
In the Query, Do I need to provide InfoProvider and restrict it to specific value?
In the query, Do I need to include, 0currency object?
Could you please guide me on this?
=============================================
Details of the Aggrigation level.
            I have created an Aggrigation Level ZAL_Prod on MultiProvider.
            Selected all the objects and activated.
            In the Filter, I have taken 0Fiscal Year Variant and saved it.

Restrict Forecast sales to the Plan cube in the Query.
that should fix it.

Remote Extractor and Real Time Infocube for SEM BCS

Hi Experts,
I have somes doubts about the integration between SEM and BW.
There is a cycle that have the next processes:
1.- begin in R/3 with the movements in FI, CO and/or general ledgers
2.- Activate the extractors standards for replicate/extract data to BW. For example, 0FI_GL_XXXX.
3.- Configure a method for take the information from BW to SEM.
4.- My doubt begin here... For take the information from SEM to the real time infocube, where I configure? What Have I for configure?
The real time infocube, What is the proposal? Where take the data? Here, Do the remote extractor begin to apply?
Thank you very much for your collaboration.
Regards,
Jeysi Ascanio

We're using 0FI_GL_20 to read directly from FAGLFLEXT into SEM-BCS via a BI remote cube. There are some basic transformations in BI to "populate" the remote cube, then a standard Load from Data Stream in BCS to do final mappings. In the BCS workbench, just create a source data basis off the remote cube.
This works at my current project due to fairly low ECC data volumes. If you are doing any complex mapping on the Company or Fiscal Year / Period infoobjects, you may need to create a inverse mapping routine in the remote cube to transfer selection criteria. If you see messages in the monitor following a data load such as "xx,xxx of xxx,xxx records ignored", that means that you are reading too much data from ECC and it is only getting filtered on the BCS side. We had this problem with a custom extractor and adding an inverse mapping routine cut the load from ~5min to 30sec. (Basically, the custom, template-delivered, extractor only had 0FISCPER, not 0FISCPER3 and 0FISCYEAR, so we would read all 17 K4 periods into BI, map them into BCS, then BCS would throw out the unneeded periods. Unfortunately, we did not have the option to change the extractor, so this was the best approach.).
If I had large data volumes, I would use a regular BI basic cube for staging (or possibly a multi-cube with a mix of basic and realtime, depending on the load requirements to BCS).
If you use 0FI_GL_20, I would strongly recommend you implement OSS Note 1245822, or be on SAP_APPL 603.0002 or later.
Hope that helps,
- Chris

How to create Real Time Infocube in BW

Hi BW Experts,
We got one requirement. We need to create one Real Time Infocube.
Our Users will enter the data in Query Analyzer later.
Please can anyone tell me the step by step.
Is there any settings we need to give..
Thanks & Regards
Anjali

Hi,
Creating a Real-Time InfoCube
When creating a new InfoCube in the Data Warehousing Workbench, select the Real-Time indicator.
Converting a Standard InfoCube into a Real-Time InfoCube
Conversion with Loss of Transaction Data
If the standard InfoCube already contains transaction data that you no longer need (for example, test data from the implementation phase of the system), proceed as follows:
1. In the InfoCube maintenance in the Data Warehousing Workbench, from the main menu, choose InfoCube ® Delete Data Content. The transaction data is deleted and the InfoCube is set to inactive.
2. Continue with the same procedure as with creating a real-time InfoCube.
Conversion with Retention of Transaction Data
If the standard InfoCube already contains transaction data from the production operation that you still need, proceed as follows:
Execute ABAP report SAP_CONVERT_NORMAL_TRANS under the name of the corresponding InfoCube. Schedule this report as a background job for InfoCubes with more than 10,000 data records because the runtime could potentially be long.
Try
http://help.sap.com/saphelp_nw04s/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm
Hope this helps.
Thanks,
JituK

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
This is only 8.3% of the available disk drive space!
http://digital.ni.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
http://upload.wikimedia.org/wikipedia/commons/9/90/Hard_drive_capacity_over_time.svg
Drives as large as 126GB or more have been around since about mid 2002. That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB! Please NI. Do something.
We deserve fixes to the old versions of LabVIEW RT. How about updates to LabVIEW RT. Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions.
Kevin.
Message Edited by kmcdevitt on 05-29-2009 03:39 PM
Solved!
Go to Solution.

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

Synchronise time in array with the real time from computer

i need help in syrnchonising my array and the real time running in my computer
As stated in the text file attached,
12:32:30 AM 0.38 1.14
2nd column is wind speed, 3rd is gust speed.
i would like to display the wind speed in a gauge with the right values. like for example, at 12:32:30 AM OF REAL TIME, NOT BASED ON THE TEXT, i would like to display the 0.38m's of wind speed in the gauge.
how do i sync the time in array with the real-time?
i have attached a program i made so far. its abit messy. im still a student, need a lil help
Attachments:
Wind Speed and Gust Speed.txt ‏13 KB
Time and MaxMin.vi ‏18 KB

wali123 wrote:
wat u mean duplicate?
Don't continually post the same question over and over. If you have new information, add it to the original thread. Did you actually click the link under the word "duplicate"?
Chopping up a discussion about the same thing into several threads (like here is this thread, but also here and here) serves no useful purpose. It will not increase the chance of a good answer, in fact most people will simply ignore it.
Imagine if everybody else would post like you! Every discussion would be if three different places and we would have three times more threads.
LabVIEW Champion . Do more with less code and in less time .

Can I use third party DAQ boards with Labview real time?

I have an Adlink DAQ 2010 card that I curently use with labview. Will this card also work with Labview real time? What requironments are there for 3rd party cards to work with Labview real time?
Thanks!

Hello George,
Here is a great link for you to take a look at: Can I Use a Third-Party Device with LabVIEW RT?
Have a great day,
NathanT

Reading data from the Real-Time Infocube

Hi,
I am using the FM RSDRI_INFOPROV_READ_RFC to read the data from the Real time Infocube..
But it reads only the Closed request. Is there anyway to read the open request data from real-time infocube via program.
Please suggest.
Regards,
Meiy

Hi,
I would assume that the function module can read the data only if its available for reporting.
May be you can try the following: You can close the request during the function module execution time and then reopen it. Not sure if this is possible.
Bye
Dinesh

Reading data from Real-time Infocube

Is it possible to read data from the Real-Time Infocube by using the function module
RSDRI_INFOPROV_READ

Hi,
If records from both the request should be read ie Request under processing(which is in yellow) and Request which is processed(Which is in Green) at a time. What should be done.
Is there any function module which returns the records of both requests.
Rgds,
Ganesha

Help needed with CVI real time

Hi,
I am new to CVI real time and need help related to this. I will explain my scenario:
1. I have few configuration files (INI). Need to validate the files (range checking..etc) during start of the application.
2. When user clicks "START" in the user interface on the host machine, I need to generate outputs (analogs/discretes...) based on the settings in the config file and read some inputs from other instruments. ( I/O tasks like generating outputs/reading inputs i am planning to perform in RT side)
3. From the user interface, user can also change the config files. if user changes the files, again file validation needs to be performed. After changing the files, if user clicks START, need to take the newly enetered config files to perfom I/O tasks.
4. I am NOT using reflective memory for my application.
I am confused in the following area:
1. File validation during startup , do i have to perform on both host and RT side?????
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
Please guide me. Any help would be highly appreciated.
Regards,
haari
Solved!
Go to Solution.

Hey haari,
1. File validation during startup , do I have to perform on both host and RT side?????
This depends on the full range of responsibility for the INI files. If they are all needed simply to change what the I/O tasks are for, then you would technically only need to validate the INI file contents on the RT side. You could, however, validate on both sides if you wanted to. However, I would probably set it up such that I send a validation command to the target, have the target run a component of the code that validates the INI contents based on how I instructed it, and then return a message that says whether or not it met the requirements I specified. However, if you are concerned with offloading that process to the user desktop (instead weighing down the RT controller performance), you could FTP the file off of the controller and perform the validation process on the host side.
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
You can send them to the target over FTP. This can be done programmatically, through MAX, command window, or a Web browser.
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
This is basically addressed in answer to question two. You would not need another structure in your RT code to handle the FTP receive component as this is handled by the FTP Client/Server communication. However, in the event that you successfully FTP a file to the target, you should likely send a message from the host to the target so that the target can respond accordingly and reload the file, reestablish the I/O values, run an idle procedure, or do whatever you like.
Hope this helps. Have a great day!
Tim A.
National Instruments

Experimenting with FCP/ Real time rendering question

Hello, I am preparing to purchase a Mac Pro and spent some time at the local mac affiliate store playing with FCP and motion.
In fcp I took two clips and dropped them in the timeline, adding the 3d cube transition, and some filters to both clips.
I was looking at performance of real time rendering on teh base config of the MP I plan on purchasing.
I then added another clip above these two, intending on dropping the opacity to further push the RTR (real time rendering). This clip overlapped the transition of the two other clips in v1 and v2.
When attempting to play the timeline the viewer window now said "Not Rendered"
My question is:
Is there a limit to how many tracks can be run under the RTR? Why did I get this message?
My main reason of the move to a Mac Pro is to get away from constantly pre-rendering.
Thanks everyone in advance!

In fcp I took two clips and dropped them in the timeline, adding the 3d cube transition, and some filters to both clips.I was looking at performance of real time rendering on teh base config of the MP I plan on purchasing. I then added another clip above these two, intending on dropping the opacity to further push the RTR (real time rendering). This clip overlapped the transition of the two other clips in v1 and v2.
<
Sounds like you know what you're doing and what you expect. A factor that has not been mentioned yet, besides RAM, prefs and drive speeds, is your video format.
Also, the new rev of FCP is taking advantage of tons of processing overhead, vastly increasing the amount of stuff you can do in real time. However, real time is largely a preview operation, regardless of the machine or system, unless you are using proprietary codecs, such as Media 100, that might be hardware-assisted. Output is almost always a rendering issue, multiple stacked or processed layers require the creation of new media.
The only way you're going to be able to decide if Macintosh and FCP are right for you is to demo thoroughly and that requires using your own footage.
bogiesan

Updating a Real-time Infocube

Hi All,
In one of the requirements in BPS planning.
We are using the Exit function for validating the data.
In our function module we are fetching the data and two of the fields in the cube needs to be modified in the cube after completion of the validations.
I would like to know if there is any existing functionality or Function module in BPS planning for this for updating the Real-time Info cube.
Thanks
Prathish

Try this link:
www.geocities.com/cynarad/reference_for_bps_programming.pdf
In the chapter where table xth_data is described more detailed this can be one possibility to validate your realtime IC.
Have fun,
Clemens

Jmx with java real time

Hi David,
my question for now is very general.
can we use jmx with jrts???
Gabi

Hi Gabi,
Some additional information:
- JavaRTS does support the JMX protocol
- JavaRTS supports most of the monitoring & management functionalities provided
by HotSpot MBeans
- some functionalities are disabled by default because they would create jitter (like
getting the stack trace of java threads). Default can be changed through the
realtime.debug MBean)
- JavaRTS comes with a few additional realtime specific monitoring beans.
Note that JMX relies on threads to do its work. These threads are not real-time.
Hence, if the realtime threads (including the RTGC) are consumming all the CPU,
you may not be able to call MBeans to see what is happening and take corrective actions.
Bertrand.

MultiProvider with two real-time InfoCubes?

Similar Messages

Maybe you are looking for