Multithreading with error check

hi
how to use orror in and orror out in multithreading procedure?
for single threading procedure ,we can use error in and error out to controll error
for multithreading procedure, we can use one error in but have many error out ,I only want to use one error out.
thanks your helps .
sonic
Sonic
Diffrent Strokes for Different Folks

Hi sonic,
there's a 'Merge Errors' function. Up to LV7.1 it can be found in the time&dialog palette.
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

Swing : login with error checking

Hi all,
I am trying to write a login with error checking on the password. If password validation fail. It will remain there. If it passes it will go to the application. any samples and sites please.
thanks
andrew

CardLayout would be good for this sort of thing - allows you to lay panels on top of one another and then switch the display accordingly.
Thus, when your app starts up you show the login screen and then once a user successfully logs on you switch to the main application screen.
I put a basic example on another thread earlier:
http://forum.java.sun.com/thread.jsp?thread=341205&forum=421&message=1404092

For Loop with Error Check

Hello all,
As per my sample VI.
I gave Empty array to For Loop. As we know this Loop will not execute because N value “0”.
But, I want to know why Error out always giving True value. This Error Indicator value changing to “True” irrespective of Error In.
BR,
Munna
Munna
Solved!
Go to Solution.

That''s exaclty what I said.
If you use plain tunnels and the loop iterates zero times, the output will give the default value for the datatype, which is FALSE for errors.
If you use shift registers, whatever is wired to the initializer terminal will be output unchanged on the right if the loop iterates zero times. Since you initialize with a error=TRUE, that's what you get.
This is all as expected. In your first post you claimed that the output is error=true using plain tunnels, which cannot be. Agreed?
If you want error=false with the shift register, change the diagram constant accordingly.
LabVIEW Champion . Do more with less code and in less time .

Multithreading with DLL function seems to run serial in stead of parallel

The following problem was posted earlier in the Knowledgebase. I have the same problem only in LabVIEW 6.1, which is according to the solution fixed.
Am I doing something else wrong?
Problem: When I run DLLs (built in LabVIEW 6.0.x) in a multi-threading environment, it seems like my calls are being run in series
rather than in parallel. Why is this happening, and how can I fix it?
Solution: LabVIEW 6.0.x only creates 2 data spaces for re-entrant VIs that are LabVIEW DLL entry points. Therefore, only 2
calls can happen concurrently (run the same LV DLL entry point in parallel.) This means that if you launch 6
threads to run the
same LabVIEW DLL entry point, your 6 threads will run serially in pairs of two. With the release of LabVIEW 6.1, this has been
fixed to allow for a more true multi-thread capability.
Attachments:
dlltest.llb ‏199 KB

One problem is that if both threads are trying to access the same hardware resource (PCI-bus card) those accesses could be serializing the calls.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Error Checking in iTunes - do I set it to ON of OFF and WHY?

So I have a disk that looks good but iTunes fails to RIP a couple of tracks in their entirety (i.e. - it only copies a portion of the track ) and this is when the _Error Checking_ option is "checked".
If I de-select the Error Checking option and retry the import, the track is imported completely
So my questions are:
1. if Error Checking is selected and the RIP is unsuccessful is this reported anywhere?
- it would be nice after ripping 18 tracks to be informed that 1 or 2 were not completed
- I could not find any errors reported - it simply skipped to the next track
- I only found it on listening to the track, which terminated abruptly
- I re-ripped the faulty tracks and noticed the Rip terminated prematurely from the status bar
2. if Error Checking is de-selected
- I assume the Ripping process simply copies what data it is able to read?
- if that is the case - I assume burning a CD will propagate the problem?
Is anyone able to provide some clear and concise information on the Ripping process WRT Error Checking - no conjecture or assumptions please, the web is full of that.
Many Thanks in advance

Thanks Limnos for confirming the propagation issue - I didn't know if apple did stuff behind the scenes.
If anyone else knows if iTunes has errors flagged or reports located somewhere I would love to know where.
For know I'll accept that turning on error checking will cause the Rip to fail and not use it.
One other thing I noticed was with Error Checking turned on the quality of some tracks were pretty poor, but once turned off the quality got better - this appears contrary to some other posts I have read.
Any feedback on the quality issue would be appreciated

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

Check DB is finished with error

Hi Guys, I need your help in solving the following issue.
Here are the logs...I schedule it from db13.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000009, user ID DDIC)
No application server found on database host - rsh/gateway will be used
Execute logical command BRCONNECT On host cscappnoi023
Execute logical command BRCONNECT On host cscappnoi023
Parameters: -u / -jid CHECK20070918154051 -c -f check
BR0801I BRCONNECT 7.00 (27)
BR0252W Function fopen() failed for '/oracle/IRP/102_64/dbs/initIRP.ora' at location BrInitOraCopy-2
BR0253W errno 13: Permission denied
BR1301W Error message from likeywlib: likey_init:Couldn't open verify PSE file ("/oracle/IRP/LASVerify.pse") for writing, errno
BR1302W Initialization of license key library likeywlib failed, return code 1
BR1304W Checking SAP license failed at location BrLicCheck-104
BR0602W No valid SAP license found - please contact SAP
BR0805I Start of BRCONNECT processing: cdwekkbc.chk 2007-09-18 15.40.52
BR0252E Function fopen() failed for '/oracle/IRP/sapcheck/cdwekkbc.chk' at location main-11
BR0253E errno 13: Permission denied
BR0121E Processing of log file /oracle/IRP/sapcheck/cdwekkbc.chk failed
BR0806I End of BRCONNECT processing: cdwekkbc.chk2007-09-18 15.40.56
BR0280I BRCONNECT time stamp: 2007-09-18 15.40.57
BR0804I BRCONNECT terminated with errors
External program terminated with exit code 3
BRCONNECT returned error status E
Job finished
Enviroment is ECC 6.0 with Oracle and AIX 5.3
Thanks in advance
Bani

Hi Bani
Edit: sorry i was mistaken, i guess the guys below are right, just ignore my post, sorry
<b>BR0602W No valid SAP license found - please contact SAP</b>
Please check if you have a valid license installed. Use transaction SLICENSE or command
saplicense -show
Regards
Michael
Message was edited by:
mho

Problem with simple error checking

Scratch the error checking bit. The original code involved error checking, but I've dwindled the problem down to the following code:
int input;
cout << endl << "Enter number: ";
cin >> input;
if (isnumber(input) == 0)
cout << "Not a number";
else
cout << "Is a number";
How is it that, when I enter the number 2 as input for this program, I get the response "Not a number." I get the same response when I enter something that actually is not a number, like the character 'a', as input. No matter what, it displays "Not a number."
This seems really basic to me. Am I missing something obvious here?

As far as isnumber() goes, I made a mistake. Apparently isnumber() is also a function because it didn't raise an error, but it was a typo -- the function I meant to use was isdigit(), not isnumber(). So, I changed the function isnumber() to isdigit(), but still got the exact same result.
I've since figured out what the problem is, though. The function isdigit() was given in the notes my professor provided, along with isalpha(), ispunct(), isspace(), isupper(), and islower(). It occurred to me that these functions are intended to be used with single characters, and in my code I had defined the variable input as an int. So, I changed input to data type char and it worked fine.
So, that solves that issue, but raises another. Consider the following code, if you will:
int numHands;
while (numHands < 1 || numHands > 7)
cout << endl << "How many hands do you want to play: ";
cin >> numHands;
if (numHands < 1)
cout << endl << "You must play at least one hand...";
wait();
else if (numHands > 7)
cout << endl << "You can not play more than seven hands...";
wait();
This is a simple bit of error checking to make sure that the number that the user enters is between 1 and 7, and in that regard, it works fine. It does not, however, ensure that what the user enters is a number in the first place. My original solution to this was the following code:
while (numHands < 1 || numHands > 7 || isdigit(numHands) == 0)
cout << endl << "How many hands do you want to play: ";
cin >> numHands;
if (numHands < 1)
cout << endl << "You must play at least one hand...";
else if (numHands > 7)
cout << endl << "You can not play more than seven hands...";
else if (isdigit(numHands) == 0)
cout << endl << "You did not enter a number...";
When this didn't work, it prompted me to post this thread, but as I mentioned at the beginning of this post, I realized that the reason it didn't work was because isdigit() works with char and not int data types, and I obviously can't declare numHands as a char because the user could enter more than one character as input.
How, then, can I error check to ensure that the user's input is, in fact, a number?

Check Event Alert failed with error - No errors in the log file.

Hi All,
I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
Checking the output file (empty) log file (no errors)
What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
Thanks!
M

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

Error with Voided Check

Hi all, I am having an issue with a check that appears to be voided. When running FCHX to extract the check to be sent to the bank we get a failure message saying the check is invalid. I tried to run FCHG to reverse the voiding of the check but it tells me that check data does not exist. I then tried to run FCHE to delete the check and that did not work either, I received an error message saying only manually voided checks can be deleted. I either need to update the database so the check looks like it has been extracted or delete the check. If I can't do either than FCHX will continue to fail for that check when we run it. Anyone have any ideas?
Thanks!

Hi Brett,
With note 1014716 the below mentioned behaviour was introduced
in standard, with this the system checks that the name in the
check PAYR-ZNME1 is blank that is contains only (CO) values ' .'. Then
the error FIBL010 is shown as in your case.
According to SAP standard system design, a check should contain correct
payee information. If it is blank, the above error is
shown as you have already noticed in the standard coding.
See the below part standard source code:
IF l_txtfield CO ' .'.
CALL FUNCTION 'READ_CUSTOMIZED_MESSAGE'
EXPORTING
    I_ARBGB = 'FIBL'
    I_DTYPE = 'E'
    I_MSGNR = '010'
IMPORTING
    E_MSGTY = l_msgty.
IF l_msgty NE '-'.
MESSAGE ID 'FIBL' TYPE l_msgty NUMBER '010' WITH i_chect txtfield.
ENDIF.
This change is as per changes with note 1014716.
Please refer the solution part of the Note 1056209 which should help you
to resolve this issue.
Best Regards,
Fernando Evangelista

REP-56071: Security check failed with error message: Error code30009 - Gene

REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
Hello,
I am also receiving the above error - these reports are deployed on our Portal - to which all registered SSO users should have access to.
one more thing...
We obtain the error only when execute under some "load", example: 15 reports running simultaneously.
Tx,
Diego.

I am also facing this problem - I've deployed the reports on the Portal and authenticated users can access the reports.
The problem is that when any authenticated user tries to access the report, on his very first access this error is shown.
REP-56071: Security check failed with error message: Error code30009 - Generic access check failed..
But after the user click on the Personalize link of the portlet and specify the parameters values(which are empty initially) then report runs fine.
Plz let me know the solution as no user will like to see this error message for the first time he opens the report.
Regards.

Background job failing with license check error

Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = XX1
Read message server host
       ok, host = hostname
Read message server service port
       ok, service port = sapmsXX1
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = T0343073854
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
        installation no: key:
        userlimit: 0 productid: R3_BASIS
        system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay

@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = XX1
Read message server host
       ok, host = host
Read message server service port
       ok, service port = sapmsXX1
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = T0343073854
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
        installation no: key:
        userlimit: 0 productid: R3_BASIS
        system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login.

Windows Update failed to check for updates with error 0x800B0001

Hi all,
I have a WSUS installed on a Windows Server 2008 R2 box, I have a new Windows Server 2012 box (joined to domain) that cannot get updates from the WSUS, whenever I try to search for new updates I receive the following error in event viewer:
Windows Update failed to check for updates with error 0x800B0001
Note: I cannot see the Win2K12 server in the WSUS console under computers node.

I couldn't get it to run even after installing the mentioned KB fixes. So I investigated the error myself, and found a "hack" that seems to fix the issue. Wrote up a small piece on it here:
http://tplive.azurewebsites.net/2013/12/windows-update-error/
You and about a thousand other people have reported "I had already installed [the update], but installing it AGAIN fixed the problem.", which is almost assuredly a simple indication that the original installation of the update failed, and you simply did
not recognize that the installation of the update was not successful.
The fact that the /selfupdate folder was corrupted (read: missing files) pretty much says it all. There's no bug. Your installation of the update simply failed. (Or, the server wasn't healthy to begin with and you got what you got.)
Bottom line: The only known cause for a client-side 0x800B0001 error code is that the WSUS server has not been
properly and completely patched.
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2013)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence R Garvin
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Syntax/error checking breaks in FlexBuilder/Flashbuilder with class libraries over Samba?

We have our class libraries on a shared server we access via Samba (and ssh for command line). Sadly, several features seem to fail in both Flex Builder and Flash Builder/Gumbo with this setup. For example, we no longer get automatic syntax and error checking. Anyone familiar with this issue and able to suggest a solution? Thanks!

Be sure you are not mixing -compat=4 and -compat=5 compilations in the same program.
The -compat=4 mode is for compiling very old source code that was written for C++ 4.2 (1996). It provides almost none of the features of standard C++. Don't use this mode unless there is a specific reason why you must.
Do not use -I or -L options that point into /usr/include, /usr/lib, or into the compiler installation area. These directories are always searched by default in the correct order. If you specify them explicitly, you force an incorrect search order.
Be sure you have the minimum patch level of SUNWlibC required by the compiler. The patch includes libCstd, libCrun, libC, libiostream, libdemangle, and some other files. The minimum patch level comes with the compiler, and the Sun Studio installer will install the patch on the system where the compiler is installed.
You also need the patch on every system that runs the compiler, and every system that runs programs created by the compiler.
It is always safe to use the latest SUNWlibC patch. You can download the current patch from
http://developers.sun.com/sunstudio/downloads/patches/index.jsp
But the link failure in your case is due to a missing function from your own code, since it involves a function parameter of a programmer-defined type. I suspect you have either
1. failed to define (provide a body for) the function,
2. declared it inconsistently as inline and not inline,
3. defined the function in a namespace different from the one where it was declared, or
4. failed to link the object file where the function is defined.

Got a MacBook with 10.5.8 I am anable to burn cds, dvds, and dl dvds. Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels. Help! Anyway to check

Got a MacBook with 10.5.8 I am anable to burn cds, dvds, and dl dvds. Everything worked before I reformatted my computer but now it comes up with error messages like unable to communicate or something about the laser power levels. Help! Anyway to check to see what is going on?

Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please

Multithrea​ding with error check

Similar Messages

Maybe you are looking for

Multithreading with error check