Music  does not play on Iphone when using the Remote app for Itunes , is this normall.

Hi all,
I am using the remote App for ITunes on my IPhone 5,I can get the phone to operate
ITunes perfectly but there is no audio coming from the phone, I am having a party and I
want to play the same playlist  throughout the house without having it up at full volume.
I was hoping to leave the laptop downstairs and plug the IPhone into a stereo upstairs.
If this is normal ...........
Is it possible to load the playlist on to 2 computers , and have them playing the same music
simultaneously.
Any suggestions please

See http://discussions.apple.com/thread.jspa?messageID=9926596

Similar Messages

  • HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

    The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
    This seem to happen after the update. Any suggestions?

    Dear Apple friends,
    I have the exact same problem with some apps.
    Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
    Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
    I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
    Should I update to the latest firmware and do what raymond73 said?
    Is there a fix for this issue?
    Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
    Is it possible to downgrade to iOS 6?
    Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
    Should I wait or go to the place I bought it and try to get the money back?

  • It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?

    It´s possible to use the "Remote" app with Itunes and a Nokia E72 with Joikuspot installed only? Or I´ll need to buy a modem Wifi?
    I was using "remote" with a D-link modem, that works fine at my iPad. But now I´m using only the cell phone as modem 3G, and don´t want to intall a router to put new cables at my notebook.

    What?
    You want to control iTunes on your computer using the Remote app on your iPad?
    And you want to connect the iPad and computer through your Nokia?
    No, this will not work.
    Just create a network with your notebook.

  • TS1741 how can I use the remote app for my Apple TV when I am using the Apple TV away from home!?

    I'm traveling and using the Apple TV at the hotel but the remote app is not working cause I can't turn on home sharing from my p&c, cause its not here

    Most hotels tend to require a login to the network via browser, which the ATV doesn't have. You won't be able to access the network for any functions if that's the case.
    You may want to contact someone at the hotel to clarify.

  • Macbook does not see Appletalk Zones when using the airport

    Anyone having a problem with seeing appletalk zones on a Macbook OS version 10.4.9 using the airport wireless connection? I have enabled Appletalk and no zones show up. I have an older Powerbook G4 running 10.4.8 and it sees the zones just fine via its Airport connection. It also shows up when I connect the MacBook via an ethernet conneciton but not via the airport. I am trying to get this fixed so I can use my old LaserWriter 4/600 printer. I don't understand why it works on the PowerBook but not the Macbook.
    Anyone got any ideas?
    Thanks for the help

    Apple Tech Support solved this problem quickly and easily. In short, the USB connected printer was pointed to the computer and not the Airport Express. Here's what they ran me through:
    - Assumes the Airport Express sees the printer as connected via USB
    1. Open System Preferences > Print & Fax
    2. Regardless of the printers you see, click the "+" button to add a printer
    3. Select the Default icon
    4. Check the Kind... should be Bonjour
    5. Select the printer type connected to the Airport Express... the system will start to add such a printer
    6. Ensure the Location is the Airport Express (mine was previously pointed to the MacBook)
    -- You can change the name here is you like also such as "Kitchen HP Photosmart c4480)... recommend a different name than the original one installed so you know which one to remove later
    7. Select Add
    8. Remove the original printer which is pointing to the MacBook
    You should be good to go.... Key points: Bonjour and Location as the Airport Express

  • HT1947 Does anyone else have my problem with atv3? Plays films in iTunes without any problems but on music every time I use the remote app on my iPhone 3GS it stops playing after around 5 tracks in. Anyone having this problem?

    Does anyone share my problem with atv3 I can play films through iTunes without any problems. When I start playing music using the remote app on my iPhone 3GS after around 5 tracks in it just stops playing and seems to lose my connection. Hoping this is human error on my part?

    I think this is probably a sign that your network could be better than it is.
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

  • When I open Power Point files in Keynote the music does not play. How can I solve this?

    When I open Power Point files in Keynote the music does not play. How can I rectify this?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Just upgraded iPhone 4 to iOS 5 now my music does not play any body else have this problem and any ideas how to fix it

    I just upgraded to ios 5 and now my music does not play at all
    I've tried hard reset and resynced a dozen times with nothing any help

    All my music is greyed out on my iPad.  I did buy a song on my iPad this morning and now it is on my iPhone but no other music is on my iPhone.

  • 11.0.5.5 64-bit on Win 8:  music does not play after update

    Recently prompted to update itunes software to 11.0.5.5 64-bit (Win 8).  Did so and now music does not play.  Music library is correct but when I select a song and then push the "play" triangle itunes says it is playing but tracker does not move off of "0:00".  Any ideas?

    The issue is probably not the machine you purchased the music on.  The issue is very likely the Apple ID you used to purchase the music.
    It sounds like the music being skipped on your iPhone 5 was purchased with some Apple ID that is not currently authorized in the iTunes (on your computer) that you sync to.  So you should go to that computer, open iTunes, do Store > Authorize This Computer from iTunes' menu, enter that Apple ID and password, then sync your iPhone 5 to that iTunes.

  • ITunes 7.0 Update - now music does not play

    After updating to the latest iTunes, music does not play. I see old posts about this with versions 5 and 6, but now I have it with 7. I've tried uninstalling both QT and iTunes and reinstalling - same problem exists. When a music file is selected for play, the scrolling diamond never advances. I've dragged the diamond to the middle of the file; it still just stays stuck. I've tried deauthorizing and reauthorizing: same problem remains. I;ve checked that the exe is not set for "mixed-mode" (an Apple article), but it isn't in that mode. All files are findable through iTunes and they will download to the iPod through iTunes. Windows XP Pro is completely up-to-date through Microsoft Update (it already was before the upgrade - on auto-update - but I double checked to be sure). An audio CD has the same behavior: the tracks are read and displayed, but they will not play. The CD spins up for about a minute and then stops. The same CD plays fine in Windows Media Player.
    Does anyone have a clue on this one? I see these old articles about the same problem in previous versions, but there are no fixes or suggestions, other than what I've already tried above.
    Any help greatly appreciated.

    I decided to revert to iTunes 6.0.5, which I found on the Apple site. Uninstalled 7.0.0 and installed 6.0.5. It wouldn't start, complaining that itunes library.itl was created by a newer version of iTunes - great! Well, it turns out there is a backup of the old library file in the iTunes directory. I replaced the one created by 7.0.0 with that older file. The music is again playing!!! We're back to where we were before the 7.0.0 update, so that's some relief, but we're currently at a deadend on the update cycle. Not sure where to go from here, except nowhere.

  • HT1947 After updating My Apple TV to 5.1 I can browse music library using the Remote app on my iPhone and iPad but cannot select a song to play. Is someone else having the same problem?

    I have updated my Apple TV to 5.1. Using the Remote app on my IPhone and iPad I can browse the music library on the Apple TV but I cannot select a song to play. Has someone else the same problem?
    Mats

    I think I found the reason. On my iMac that is hosting the music library a song already was playing. This seems to block out me from selecting another song though my Apple TV.
    Mats

  • HT5100 I have an ipod shuffle, obviously it does not play video, can i use my shuffle to play the audio part of an i-tune u course that normally comes in video format? To put it differently, if i-tunes course available as video can I download the audio po

    I have an ipod shuffle, obviously it does not play video, can i use my shuffle to play the audio part of an i-tune u course that normally comes in video format? To put it differently, if i-tunes course available as video can I download the audio portion of an itunes video?

    Welcome to the Apple Community.
    Unfortunately not.

  • New nano - music is loaded, nano is charged, volume settings are all on but the music does not play thru the earphones?

    New nano (7th generation) - music is loaded, nano is charged, volume setting are all on but the music does not play thru the earbuds,  Checked with a different pair with same results...I'm sure I must have something not turned on that should be but not sure - help!

    Hi deb253,
    If you are having sound issues with your new iPod Nano, you may find the following article helpful (it is aimed at the 6th Gen, but the steps should be similar for the 7th):
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/ts3474
    Regards,
    - Brenden

  • I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    I have a disc of Creative Cloud 6. Acrobat Pro does not work. I have used the other programs and they are fine, but when I try to open Acrobat Pro nothing happens. I am using Microsoft System 7.

    what's creative cloud 6?  do you mean cs6?
    what version of acrobat pro do you have installed and what are you clicking to start it?

  • HT204302 my itunes does not recognize my iphone when plugged into computer it recognizes my iphone as still camera

    Help
    Itunes does not recognize my iphone when plugged into computer it recognizes it as a still camera. I have installed the lastest version of itunes and gone through the troubleshooting tips and still have the same problems.

    Hold Sleep Button with Home Button toghether until it restarts Always it takes 8 to 15 seconds, after it restarts leave the sleep button and remember do not leave the home button it automaticlly switches to DFU mode.

Maybe you are looking for

  • Mac to tv cable

    Hi I was in a pc shop today and saw a pc to tv cable (it also works with macs) do you think this cable would allow you to watch imovie on your TV (which you can then record to tape or dvd) if anyone has tried this or has any theories, will they let m

  • Problem using show_document

    Hi.. I have a requirement where , i have the path of attach file. i have to download this file and open it. a file can be text,pdf,excel or doc.. file download is done property and i m also getting the path where that file is store. problem is , i m

  • The restriction of using download software in OTN

    I have downloaded the oracle8i server from OTN,is it a trial software,and how long I can use it. thanks. null

  • Invoke-Sqlcmd problem on Windows server 2008

    We have several Web Servers running Win2008 and need to be able to use the Invoke-Sqlcmd powershell cmdlet to execute arbitrary SQL.   Tried installing PowerShellTools.msi but Invoke-Sqlcmd still isn't recognized. What do I need to do to get support

  • Flash Button Error

    I use Dreamweaver MX 2004. When go to Insert Flash Buttton, I am now getting the following error message: While executing object Tag in Flash Button.htm, the following JavaScript error(s) occurred: At line 205 of "C:\Program Files\Macromedia Dreamwea