Music only in headphones, but speakers work with alarms
My iPod Touch is acting weird.
No sound in speakers - only alert audible.
What can be the cause?
With headphones:
1. Pressing volume buttons will display the headphones speaker icon with a bar below it showing the current level of volume.
2. Alarms are audible in both speaker and headphones.
3. When playing a song the volume is displayed as a blue bar below the prev, play/pause, next bottons.
4. Detaching headphones causes the music player to pause and the blue volume bar disappears.
1 - 4 are all normal behaviour of an iPod Touch.
Without headphones:
5. Alarms audible in speaker.
6. Pressing the volume buttons displays the ringer speaker icon with a bar below shoing the ringer volume. There are no bars shown. Actually the Ringer volume is changed which can be verified by going to settings - Sounds (See 8 below)
7. When playing music there is no sound and no blue volume bar below the prev, play/pause, next bottons. The only indication that the song is playing is the play time indicator that progress through the song at its normal pace.
8. Settings - Sounds display the Ringer and Alerts level as a blue bar. When adjusting this bar the ringtone is played by the speakers. The Change with Buttons is on the volume also changes when the volume buttons are use.
My first thought was a defect sensor in the headphones socket causing the iPod Touch to beleive the headphones were still attached, but the iPod Touch clearly sense when the headphones are not attached as can be seen from the symptoms above.
I have restored the phone from a previously working backup and updated the software to the newest release so it's now:
Mac OS X Lion, iTunes 10.4.
The iPod Touch is from October 2010 so it's still under warranty. However before going through the hazzle of a warranty case I want to exhaust other options.
Right now I'm doing a factory reset and will test it in it's virgin state.
I just read suggested postings and pushed the device into the jack harder until it really seemed to click and now they work. I will do the same with the auxillary jack and assume all will be fine. Thanks to all those old postings. What a simple fix!
Similar Messages
-
Only the front 2 speakers working with a 5.1 set up when playing mus
I have a xtreme gamer card, with the 2.5.0006 driver installed which worked fine up until recently. Recently only the front 2 speakers play when playing music. All 5 produce sound when tested from either the creative console or windows sound manager. So all 5 are correctly connected, yet when music is played only the front lef and front right speakers are used.
I'm using vista 32-bit.
If there is already a thread on this particular problem (all 5 work on a test and it's a 5. not 6. system) then I apologise but would still like a link. Thank you for your advice.You should email Creative support and report the problem.
CMSS-3D has problems with the latest beta on Vista x64, but you're running 32-bit Vista on their release drivers, which is supposed to work fine.
If you get a message saying 'would you like to disable audio enhancements?' and you click 'yes', you are disabling CMSS-3D from working, which is the function that transforms normal stereo music into multi-speaker music.
You can try re-enabling it manually:
Open Sound Control Panel.
Select your output device (e.g., Speakers.)
Hit the Properties button at the bottom of the Sound Control Panel.
Select the Sound Blaster tab.
Uncheck the 'Disable Sound Blaster enhancements.'
Hit OK, and OK.
Go into the Creative Audio console, make sure you're in Entertainment mode, and go into the CMSS-3D panel, set your settings here as you like it.
Pray.
Test.
That may not work, especially if the driver / operating system was reporting problems with CMSS-3D in the first place; you may end up getting garbled sound or an error message again.
Send your details to Creative so they can try to work on it, because it sounds like driver issues to me. -
Audigy 2 ZS - Only 1 of 2 Speakers Works with Vi
I just installed the full retail version of Vista Home Premium 32-bit on my Gateway PC with 2. Gateway speakers. They worked perfectly well under XP Pro, but not under Vista. I downloaded and installed the January build of the beta Audigy 2?drivers, and now sound from both channels seems to come from only one speaker. Nothing I tried from Vista's sound control panel or the Creative Console will get both speakers to work. One channel is loud, the other is much softer - but both channels still come from just the one speaker. I realize that this current driver set is still beta, and I would hope if/when a supported final version comes out, issues like this will be corrected. If anyone knows something I may have overlooked or done incorrectly, please let me know. My skill level with computers in general and Windows in particular is at a high intermediate level. Thanks!
Thanks! I did try the suggested solution, but I'm still getting sound only from one speaker. The sound is no worse than the Vista beta driver, so I'll stick with the XP drivers for now. You wouldn't think that sound should be such a big deal, except that I've read that Microsoft is trying to make it difficult or impossible for people to record streaming audio under Vista. That might account for why the whole sound thing seems to be such an issue with Vista.
JB -
Speakers works with music, it works with headphones, it works with the ringtones in the setting mode but it does not ring when is in normal mode...Please HELP!!!!
Try a different ringtone.
Reset or restart the device. -
I have been using the Firefox feature in which I could have multiple sets of tabs open but see only the set I was working with. I updated and now feature is gone. I had a small icon on the upper right side of my toolbar. I used it all the time to keep separate windows for news, financial items, travel plans, etc. Has this been removed from Firefox?
Hi,
The [https://support.mozilla.org/en-US/kb/tab-groups-organize-tabs Tab Groups] feature is still present. You can try to right-click the + after the last tab and [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars Customize]. If the icon is hidden behind another, or if it's available inside the Customize mini window, you can place it back. If the problem persists, you can also try to '''Reset toolbars and controls:''' and '''Make Changes and Restart''' [https://support.mozilla.org/en-US/kb/Safe%20Mode Safe Mode] start screen. -
How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?
Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data. -
Only Front speakers work with Vista and x
New Windows Vista, installed x-fi extreme gamer and only the front three speakers work on 5. system. Help, i tried and downloaded the update from Creative, no help, still not working, any fixes, i want my 5. like my old XP system allowed....
System Specs
P: QX6700
M: ASUS P5N32-E SLI
R: 2Gb Corsair
V: 8800GTX
S: X-Fi Xtreme Gamer
Well, It is the upgraded drivers that are marked 03-5-07
Thanks, above poster, however if it is something like updreg.exe, here's the info below.
The Vista drivers don't have the updreg.exe, apparently...
I have all the ones that start with CTxxx... starting up. Listed below
-CtHELPER Application - CTHELPER.EXE
-CTXfiHlp Application - CTXFIHLP.EXE
-CTXFIREG - CTxfiReg.exe
Anybody, PLEASE HELP ME!!! Also NEW to these drivers, just noticed. The SIDE Speakers don't work. I've tested the 3.5 cable and Speakers and they're fine. Also Creative 7800 7.!
Creative Labs, c'mon now give me a break. Can't you make your products just work? -
No sound when playing videos/youtube but speakers work
No sound when playing videos/youtube but speakers work. Mute is not on that I can see. Volume is maxed. Devices are enabled. Speakers tested. Have tried with and without headphones.
I tried to do a Driver Update but Toshiba Support doesnt recognize my model/serial numbers so I dont know what Driver to use.
I have a Satellite C50-05U
Model number PSC12C-05U00S
Serial number XXXXXXXXX
I tried a restore from previous backup but it hasnt helped. any suggestions?
[Moderator edit to remove serial number.]
Solved!
Go to Solution.I tired this and it worked:
Adobe Flash Player plug-in
https://support.google.com/chrome/answer/108086
Adobe Flash Player is directly integrated with Google Chrome and enabled by default. Available updates for Adobe Flash Player are automatically included in Chrome system updates.
If you want to use Adobe Flash Player in other browsers, you’ll need to separately download the Adobe Flash Playerfor those browsers.Enable or disable Adobe Flash Player
These instructions apply to Google Chrome on Windows, Mac, Linux, and Chrome OS.
Type chromelugins in the address bar to open the Plug-ins page.
On the Plug-ins page that appears, find the "Flash" listing.
To enable Adobe Flash Player, click the Enable link under its name.
To disable Adobe Flash Player completely, click the Disable link under its name.
Note: If you've previously installed Adobe Flash Player separately, you'll see two files listed for the plug-in. If both are listed as enabled, the version bundled with Chrome will be used. To enable a specific version of Adobe Flash Player, clickDetails in the upper-right corner of the page. Then click the Enable link for the version of Adobe Flash Player you want to enable. The table below shows the filename for the version that is integrated with Google Chrome. more at the link above ..... -
How can I get the iBook app on my Mac to backup ePubs I created with Pages on my iPad? Only seems to want to work with purchased books from the ibook store. The problem is, once I create a document in Pages and turn it into an ePub to be opened in iBooks, I delete the document in Pages, because I don't need two copies taking up space on my iPad. Before Maverick, iTunes would backup everything in my iBook app on my iPad. If something ever happened to my iPad, all of my created ePubs would be lost and I would be screwed. I suppose I could keep everything on Pages and go to iCloud and download my documents to my Mac, but that is a lot of steps. I may have to do that if there is no other way, but I am hoping someone will have the answer for me. Pretty disappointed in iBooks app for Mac at this point.
iBooks only syncs purchased books. Others must be synced in iTunes.
-
Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please
Hi, sill no joy with my sound on my iPad .the sound only works on one app ( Annie ) and the ring volume and it works for about 5 seconds after I switch it on . Was talking to apple and they said the reset my iPad and this will fix it .done this and it is still not working only with earphone and Annie. What next ?As they said this is unheard of as it was the upgrade to iso6 that caused this problem . Help
-
My Xlite 4.0 software does not work with Jetpack but does work with droidx hotspot can this be fixed? I have attached a packet capture for packets from DROIDX with android 2.3.4 marked as XliteWith3G.cap and a packet capture for Xlite with the Jet pack XliteWith4G.cap obiviously same packets coming from Xlite different results depending on WiFi connection.
Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary -
Neither earphones nor speakers work with my iPhone 6
Neither my earbuds nor speakers work with my iPhone 6. The earbuds had been working and the next time I tried them they no longer worked. I tested them with other devices and the problem is not the earbuds nor the speakers. Any Suggestions? Thanks
mariefromarnold,
The article linked below details a number of steps that can help get your devices to work correctly with your iPhone 6.
If your headset isn't working
http://support.apple.com/en-us/HT203026
All my best,
Allen -
I am tring to start work I masseg and facetime on my I pod touch 4g on IOS 6 but not work with my apple ID can you help my
Maybe here. You are not really provided much information like what happens when you try.
iMessage won't work after iOS 6 upgrade: Apple Support Communities -
IPhone 4 doesn't ring, only vibrates, but speakers work.
My iPhone 4 (AT&T) suddenly won't ring when someone calls or I get a text, it only vibrates. The speakers play music fine, and I can have phone conversations and hear/speak to the other person fine. Also, the alarm clock sounds The mute switch doesn't seem jammed or anything, but when I switch it off, it doesn't show the picture of the bell with the line through it while vibrating to let me know its off. Also, the volume buttons get no response when pressed. Any ideas?
I had this issue as well but I figured out how to fix this issue by just reading previous responds, here's a way how I got mines to work .....
1. Go to Settings > Sounds > Ringer and Alerts
2. Turn off the "Change with Buttons"
3. Lower all the volume
4. After the above has been made ... turn up the volume using the buttons on the side of the phone. [Once doing it, you should start hearing your default ringtone]
5. Once you've started to hear your default ringtone just continue turning up the volume all the way
6. Finally turn on back the "Change with Buttons"
Now you can start hearing your lock sounds, dial-pad tone, etc. -
HP Pavilion dv6-6127cl (Notebook PC)
I have spent over 6 hours on the phone with tech support, but I remain unable to have any sounds go directly to my built-in "Beats" speakers. I can make the speakers work if I insert a plug into the headphone jack on the keft side of the notebook. If I plug in headphones to listen, I do get sound out of my headphones, but I also get sounds out of the builr-in soeakers. Tech Support insisted that either I spilled liquid onto my keyboard. (I did not), I dropped the notbook. (I did not), or the my computer was infected with a virus.
I doubt that this problem was virus related, because the problem happened during a 4 month period that I had no internet service. To be certain there are no viruses, I took the extreme action of restoring my notebook to the factory condition. I still have the same problem.
During my 6 hour troubleshooting marathon, the support technician had me update my BIOS and initiate many lengthy self-test procedures, all to no avail.
Please send me information on who to send this laptop to for repair or replacement under the original warranty.
I also have another issue. Tech support claims that my notebook warranty expires in November, but I purchased this notebook from Sam's Club brand-new, in an un-opened box in mid-January 2012. How can this date be explained and/or corrected?
Many Thanks,
Mike McKinney
Rockledge, FL.
USA
(321) 636-3500Hello spl1080,
Your headphone jack is not working correctly on the laptop.
Was everything working correctly before you upgraded to Windows 8?
I know that you said that you updated the driver, but did you try the driver for Windows 7 and 8.
Here are the links for the drivers.
Windows 7
Windows 8
If you are planning on sending it in to HP to have it repaired they will make you run a recovery before you send it in.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.
Maybe you are looking for
-
How do I save all tracks as one and create one file/mp3?
I have logic pro 8 and I am a rapper. I created a song, which is about 6 tracks long. Now that I have finished the song, I want to save the COMPLETE product as one file, a file type that can be played in Itunes. When I try to save it, it only saves e
-
Audio Line-In Meter...Is there one?
I'm relatively new to Garage Band and this will probably be regarded as a dumb question (and I did read the Help section in Garage Band). But, all I am trying to do is convert some old cassette tapes to digital so I'm playing them into Garage Band. T
-
Hi, all, I need to create a DOM tree and take the value from user input, I have no idea how the user can enter the strange chars like BEL. Do I need validate every char make sure is in the xml char range when I create the node? or the biuld in parser
-
In Photoshop CC 2014, if I open the "Image Size" dialog, using CTRL-I, I can choose which resample algorithm to use such as Automatic, and the new "Preserve Details" among others. But when I go into: Preferences > General > Image Interpolation The n
-
TS1398 'could not scan for wireless networks' problem
I keep getting 'could not scan for wireless networks' whenever I try to connect. I have turned wi-fi off/on, restarted my network, iPod touch, and the home modem. What are some other options for fixing this problem?