Musical typing not working properly

Hey guys I'm new to Logic Pro X and Im having some difficulties with the Musical typing keyboard.
For some reason the note "E2" does not play when I hit the "D" key on my keyboard, all the other notes work fine and even with lower and high octaves but for some reason "E2" does not work. I checked the Velocites and an its fine so I have no idea what it could be as it was working earlier today.
Any help would be much appreciated

Open your Controller Assignments window (cmd-K), delete the assignment to E2 and close the window. Make sure Learn Mode is off (=grey button - blue button means it's on))

Similar Messages

  • Musical Typing not working as MIDI input

    Hi all,
    I recently bought and downloaded Logic Pro X for the intention of producing music at home. Whilst I am still getting things bought and sorted I have yet to buy a MIDI controller to use and thought I would get by, to start with, using the mac keyboard and musical typing. It was all fine to start with, but after playing around with some settings, I find that mysical typing is failing to provide any input into Logic whatsoever.  I've tried looking for answers elsewhere to no avail and I would really appreciate it if someone on here could help me solve this issue.

    Ryanbb1 wrote:
    Right I've set all the virtual cable to look like that of the picture but still nothing.
    You mean that it was not like that when you opened the click & ports layer? This is the default config, so maybe the troubles are specific to your project?
    What if you create a New project from the Empty template?
    "Reset all MIDI drivers" should, if anything, have brought it back. I just tried it, and it does not disconnect my MT keys here. "RaMd" can clear up MIDI controller lag that has built up in long sessions, that's what I (very occasionally) use it for.
    The next step to take (if the behaviour is still erratic  in a fresh new project) is to reboot your Mac. If that doesn't do it either, trash Logic preferences. If that doesn't help, I give up.

  • Music player not working properly!!!

    Yea I'm becoming really frustrated with the new ios7.
    I listen to alot of music, after upgrading to the new ios, the music player sometimes locks up or doesnt play songs at all.  If I move the scrubber bar to the middle of the song, then it resets itself back to the begginning at 0:00, the music still does not play.  Only after a while of messing with the play/pause button it will play. 
    It seems that if there isn't a good internet connection, then the music does not play, which makes no sense because this is music that I've paid for and downloaded on to the phone.  I've been a die-hard Apple fan for many years but, If you're going to tell me that I need to be connected to the internet to listen to paid music that should be on the phone, then I may just go to another device.This is getting really annoying.
    Sometimes the cloud icon will show up next to the album name/song - which means it's on the cloud?  But not on my phone where it should be? And if I press the cloud button to download the music then it still does not play?
    This happens about 75% of the time.
    While the new ios has cool features, it has lost its reliability and is full of problems.
    Get your crap together Apple or I'm going to another device.

    This sounds like the same problems I am having on two different ios devices. I'd like Apple to acknowledge this, at least so that there's some reason to hope for a solution. This is not what I paid for.

  • Nokia N8 music player not working properly (firmwa...

    I have just updated my N8 to Belle. It was working fine untill few days ago i added some mp3 file to my phone. I was trying to refresh the music player bt i won't stop refreshing. Please need help ASAP cuz it's really **bleep** me off 
    thanks in advance

    Hey rafinmb
    Welcome to the forum!
    Try and isolate the problem, check whether if only one song is affected. Should that be the case then remove  the song and  add it again and  the same goes for all  the other song. It could simply mean that the file(s) were corrupted during or before the transfer process.
    Lets us know is if this works.
    If this post answers your question, you can help others by clicking the green accepted solution' button.
    Please ask your questions to the main board and not to my mailbox. Thank you.

  • Ipad music search not working properly after updating to iOS 6.1

    I just updated my 3rd generation ipad to iOS 6.1 and search in music app doesn't work now.i search for some song and only a few songs show up, whereas I can find the songs, manually. Even the spotlight search doesn't show all the songs.
    I have tried restoring to factory settings and then re-syncing with iTunes... But no help..
    I think there are only a few songs that show up in the search everytime..

    This is happening to my iPad Mini too, unfortunately. The best thing to do is to wait for the next update, which might come soon. But, you might want to go to your local Apple store and ask if they can do anything about it. Hope this helps
    <Link Edited By Host>

  • Oxygen 49 and musical typing not responsive with Logic X

    So recently my M Audio Oxygen 49 Midi keyboard stopped working. I tried switching to the Musical typing and that didn't work either. I don't know if Logic X doesn't support the keyboard but then why does the musical typing not work. Any solutions?

    Assuming that your Audio output is still working ok... Drag an Apple Loop to the arrange window and see if you can hear it play back to confirm.. and if you cannot hear anything go to Logic's Preferences/Audio and check that Core Audio is checked and the correct audio output is selected for Output...
    Musical Typing works fine with LPX and any OS X combination so the issue has to be either;
    User Error...
    Some form of preferences corruption.. or issue with your Control Surfaces...
    Therefore... try the following first.... deleting both the Logic10.plist and the CS files...
    Delete the user preferences
    You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
    Quit Logic Pro
    In the Finder, choose Go to Folder from the Go menu.
    Type ~/Library/Preferences in the "Go to the folder" field.
    Press the Go button.
    Remove the file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the file from the preferences folder.
    Restart the computer.
    Note: If you cannot find the two files.. you have not followed the instructions exactly as written.....

  • My music app on my iphone 5 is not working properly since I downloaded ios7.

    The music app on my iphone 5 is not working properly since I downloaded ios7.
    Sometimes I start to use the music app and then part way though a track it stops. I try to re-start it with no joy. I'm also finding the touch screen is less responsive. Can any help me fix the issue or will I need to take it into the store?

    Removing the SIM has no affect on the power of the phone. It is just the part that facilitates connecting to your carrier. Try holding the sleep/wake and home buttons together until you see the Apple logo on the screen and then release the buttons. The phone should reboot. You may need to hold the buttons together for 15-30 seconds.

  • I had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    i had a mac pro system..from last 2 days the keyboard is not working properly..if i typed a key but it displayed 2 or 3 keys..what is the problem? is keyboard gone..?

    Hey ynareshbabu,
    Thanks for the question. I understand you are having issues with your keyboard. The following article provides some great troubleshooting steps:
    One or more keys on the keyboard do not respond
    You may want to refer to the "Some keys don't work as expected" section.
    Matt M.

  • I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    I had to restore my computer. After reinstalling itunes and sincronizing with my ipod, the music files were not organized in itunes as in the ipod: some songs were missing, some albums has no cover? Why is the sincronization not working properly?

    See Recover your iTunes library from your iPod or iOS device.

  • Music/iTunes Match not working properly since update to iOS 7

    Music/iTunes Match not working properly since update to iOS 7

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below.

  • Just upgraded to iOS5 on iPad. Music app and mail does not work properly.

    Just upgraded iPad2 to iOS5. Music app does not work properly. When I select a song to play, it plays a different song. Sometimes, it just stops playing songs, other times, it shuffles songs.
    Not sure whats going on.
    Worked fine using iOS4.3.5.
    Synced the iPad to iCloud. enabled mail. It shows under settings that the iCloud mail is setup, but the mail does not appear in the mail app. Not sure whats happening with these functions on iOS5.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • If my itunes is not working properly is it safe to uninstall it & then reinstall it without losing my music?

    If my itunes is not working properly is it safe to uninstall it & then reinstall it without losing my music?

    Under normal circumstances, an uninstall/reinstall doesn't touch your content. (That being said, it's still always a good idea to maintain a current backup at all times in case of disasters of any sort.)

  • Mouse is not working properly on a one month old HP Pavillion 15-NO28US

    I'm sure it's already been talked about on here, but I haven't found a successful fix or the same exact problem as I'm having. I went thru the latest Windows 8.1 update recently (at least I think it was the update) and when I restarted my computer yesterday the mouse was not working properly. Like a lot of other people who are complaining about it, the two-finger scrolling and other similar features are not working, but what really bothers me is the the mouse is almost acting like it was changed to a left handed mouse. I've checked the settings and it is still set on right-handed, but when I click the left mouse button the small window opens up next to where I clicked, which has the copy, delete and paste options (and other regular options) in it. When I click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I downloaded and install the latest synaptic drivers and nothing happened. I even performed a system recovery last night to reset all setting and it's still not working. This really sucks because I've only had this computer for about a month and I've already lost everything I've put on it...most importantly all of my school work and music apps. Is there anything to fix this or can anyone tell me what's going on with this stuff, before I have to call into HP and have a melt down?

    Hi Kevin3047,
    Thank you for your query, I will do my best to assist you!!
    I understand that after updating from Windows 8 to 8.1 your mouse is not performing correctly. You have tried the built in troubleshooter but to no avail.
    You checked the settings and they appear ok, but when you click the left mouse button the small window opens up next to where you  clicked, which has the copy, delete and paste options (and other regular options) in it. When you click the right mouse button, nothing happens. Double tapping on the touchpad doesn't do anything either. I grasp that you did a recovery but it did not help.  You also stated you lost your data once, and that in itself is extremely aggravating, I agree.
    Here is a step that may help.
    Go to the Command Prompt and right click on it to run as Administrator
    type sfc /scannow and press enter.  This will scan for corrupted files and try to repair them.
    Here are links to two documents that may aid with this process.
    Troubleshooting Mouse Problems (Windows 8)
    Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
    Would you also please try a clean boot to see if it persists. Here is  a Windows document to assist you.
    How to perform a clean boot in Windows
    If none of this has alleviated the issue, I suggest you do a  Refresh Your PC to Resolve Problems (Windows 8).
    If the issue still pesists, I would do a recovery again.  You will be prompted during the recovery to backup your personal files to prevent data loss. I would suggest you choose yes, to prevent data loss.
    Performing an HP System Recovery (Windows 8)
    Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    This will take it back to factory. Here is a document on Updating Windows 8 to 8.1 to assist you with doing the update again.
    If you are still experiencing the issue, as @visruth stated I would contact HP support for assistance.  They are able to remotely log onto your system to help with this difficulty.
    Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.
    Good Luck!!
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Satellite P25-S520 - DVD drive is not working properly

    Fix DVD Drive or buy external drive
    My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
    I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
    An attempt at updating the driver was also unsuccessful.
    I was able to rip a music CD last night so that at least is working correctly.
    Does anybody know how I can fix this? The important part is being able to load my new program.
    Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
    Thank you for any help,
    Satellite P25-S520
    Driver Provider: Microsoft
    Driver Date: 7/1/2001
    Driver Version: 5.1.2535.0
    Digital Signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.
    However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
    So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

  • Trackpad Not Working Properly Following Upgrade to Windows 7

    I recently did an in-place upgrade from Vista 32 bit to Windows 7 32 bit on my Lenovo T61p. I also updated all the Thinkvantage drivers and software and have been checking daily for additional updates. Following the upgrade I noticed that the trackpad is not working properly. When I'm typing an email message in Outlook 2007, the trackpad and buttons will not work in the body of the message. I can click on the icons in the ribbon, but nothing works in the body of the message. Same behaviour in MSWord 2007 and Excel 2007. I uninstalled and re-installed both the Ultranav drivers and software utility, using the Windows 7 32 bit versions posted on the Lenovo website, without any improvement.
    I contacted Microsoft technical support and spent an hour on the phone with a Windows 7 technician. He concluded that the problem was with the trackpad driver and was Lenovo's responsibility to address. I then contacted Lenovo technical support and the technician said there was nothing he could do to help me. Disappointing response from both organizations. I've reverted back to the Windows PS2 mouse driver for the time being.
    Any suggestions would be most appreciated. Thanks

    In fact, the problem could be due to the installation of Client Security Solution 8.3 for Windows 7 ( It has been discussed here:

Maybe you are looking for