Musicapp, speaker and volume control won't work since updated to iOS 7.1

Since I updated my iPhone 4 to iOS 7.1 my iPhone works faster than iOS 7. But some apps like musicapp, youtube have no volume control and the speakers won't work. When somebody call me the iPhone rings normally. I tried turn off bluetooth because I thought the iPhone will conect to my car. I pressed the lock and homebutton for reseting, I deletetet my whole iPhone and installed iOS7.1 again - nothing changed. Only when i plug in my earphones everything will work as normal.

Hi AmishCake!
Thanks for your tipp! i cleaned the headphone port and usb-port and reinserted the plug several times!
i think this isn't the problem!
here i prepared a picture how the screen looks like when i plug in my headphones!
https://www.dropbox.com/s/omi3hlp1zzyx43k/Foto%2026.03.14%2013%2017%2040.png
it seems to be a problem of the update to 7.1 because some guys posted the same problem on other sites.
sorry for my bad english and thank you for trying to solve my problem!

Similar Messages

  • Head phone volume controls are not working after updating to ios 6.1 y?

    head phone volume controls are not working after updating to ios 6.1 y?

    I have tried my head phone with other iphone still the same problem may be my head phones has been not working need to chek my iphone with other head phones which are working

  • Lion 10.7.1 brightness control, backlight control, itunes control and volume control won't work!

    basically the very first row of my keyboard refuses to work.. except for esc.& f3 f4..
    it happened all of sudden, the only thing odd i did that day was to plug in my tiny ipod 2009 mode, and the other day these keys are all disabled.
    I recently upgraded from snow leopard to lion, but it did happen few days later than the upgrade.
    and I have a partrition of disk running snow leopard, and i tested it, all of the keys are working in snow leopard, so I think it won't be a hardware problem.
    any suggestions?

    Just in case someone got the same prob.. so i went to talk to 'apple genius' and then they figured out my problem:
    install snow leopard & lion at the same time.
    So i fully removed snow leopard and all keys got back to life.

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • My 32GB 4G itouch's lock button AND volume button won't work.

    I got my 4G 32GB on Christmas and about two weeks later the lock button and volume button just stopped working. My hands weren't even wet. How do I fix it and how can I restart it without the lock button?

    You may need to make a trip to an Apple Store or other authorized place to have it repaired, assuming it's a hardware issue. If it's a software issue, you can try going to Settings > General > Reset > Erase All Content and Settings. This will force the iPod to reboot and restore it to factory settings, but you will be able to get your data back from a backup. If it is a hardware issue, then it's time for a trip to the store.

  • ITunes won't work after updating to iOS 8.3

    After updating to iOS 8.3 my iTunes App on my iPhone 6 Plus and iPad Air now both don't work.
    If I go to play an sample of a song, the little square box with the cover on spins around and then spins back around and no music will play.  I'm all so unable to play any music that I've already purchased via iTunes on my iOS devices.
    Any comments on what could be causing this?
    All so, on another note.  My friend has just updated to IOS 8.3 and he just noticed that he no longer even has the iTunes App on his iPhone 5.
    Thanks.

    After posting this, I've since found out that my iOS iTunes App on my iPhone 6 Plus works all OK when on WiFi, it just won't work when on the data/3/4G connection.
    Anybody else having this same issue since updating to iOS 8.3?

  • Os X Yosemite Volume Control Won't Work

    Since upgrading I've had serious issues with my volume control on my macbook pro. First is that the keyboard buttons won't do anything. I can press them and the picture shows up saying they're moving the volume up and down, but on the actual menu bar icon, nothing changes. Also, when I plug things into my computer I have to manually open the preferences to change the output, and once I do that I have to wait about 5 mins for it to register the change. I've tried restarting my computer many times but it doesn't seem to fix the issue :s.  HELP!

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then take an action that isn't working the way you expect. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Brightness and volume control keys not working with windows 7?

    brightness, volume control and some other keys keys are not working with windows 7 with macbook pro retina. Can I fix it?

    Welcome to the Apple Support Communities
    Have you installed Boot Camp drivers? You need them to make your computer work properly on Windows, and to use your function keys as Play or Pause, volume and brightness keys.
    To install them, follow these steps:
    1. Press the X key while your Mac is starting to start into OS X.
    2. Open Boot Camp Assistant and tick only the option to download Windows support software.
    3. Windows support software will be downloaded and Boot Camp Assistant will ask you to burn it into a DVD or USB drive, so do it.
    4. Start into Windows, insert the DVD or USB drive and install Boot Camp drivers. Your Mac and your volume and brightness keys will be working after installing the drivers

  • Apple TV messed up Macbook Pro, Keyboard volume controls won't work.

    I can't get my Keyboard Volume controls to work on my macbook pro, Apple TV messed it up. This isn't an issue with disabling the remote control infrared receiver. When I want to turn my volume up or down, I have to go to system prefrences and change the volume that way. It's annoying and a big waste of time. Please help me before I throw this computer against the wall.
    Thank You!!

    I've got an extremely similar problem. Spillage on the keyboard. Unknown, what it was.
    To start with it was dead, no power up.
    Then it dried out. There was still a bit of battery power left, and the mouse and track pad worked for a few minutes then it all froze.
    So I shut the lid. I left it like that, because I couldnt switch it off.
    Much later, opened it up again and all windows opened up, all info was correct,
    I was advised to try wireless mouse and keyboard, but you have to get in there before it freezes again.
    The battery was charging normally as well.
    I made the decision to let the battery die completely and then switch it on again, but sure enough when I did this, it ignored any re-boot command and that's that. Dead as a do-do.
    So, without being a computer whizz kid, I presume, it's off to the Apple store for a sizeable bill.
    Unless someone else has a cunning plan ????????
    I would love to hear it !!!!!!

  • Sound stuck in Mute and volume keys won't work

    The other day, I happened to Mute my sound. Now, it will not let me return to having sound. I have tried the volume up and volume down keys, but they don't respond. I've tried adjusting the sound using System Preferences, but to no avail, since there is nothing listed in the "output" window. I do get a start-up sound when the system boots up, so I don't think the speakers have died. And the sound still doesn't work if I plug headphones into the jack... anyone?
    Thanks -
    ibook   Mac OS X (10.3.9)  

    thanks - I tried that - for some reason, I decided to just back up recent files and reload the 10.3.9 update and now all the keys are working again.... Thanks for your input - I don't know what little demon was posessing the ibook, but I'm glad reinstalling the update killed it.

  • Stylus and Screen Rotation don't work since update

    Hi,
    since the X update my stylus won't do anymore. I tried reinstalling/updating the linuxwacom driver, however the package build stops with the error: "Too few arguments for for the function >InitValuatorAxisStruct<"
    In addition to this, rotating the screen with the rotation script given on the tablet pc wiki page or doing it manually in xfce4 crashes my X server.
    Can anyone hint to why the new X crashes on rotation or why my stylus won't work anymore?
    Appreciating your concern
    Neuneck

    Thank you for your fast response ! I have a 2 TB Time Capsule as well. Maybe I will be moving the images to the Time Capsule and give it a try creating
    a new catalogue from that. All kind of files worked very well on all Mac OS X and still do except images. So it doesn't seem to be a Mac OS X / NAS thing
    generally. Looks more that LR 5 doesn't like the NAS especially when we take into consideration that the files work perfectly on my MacBook AIR that has
    access to the NAS, too but without LR 5.
    Regards,
    Bernd

  • Scrolling and Swipe funtionalities have stopped working since update.

    Since I have installed updates on my Mac the magic mouse settings now show just basic settings such as tracking speed, double-click speed and primary mouse button. As the title suggests scrolling and swiping are no longer working.
    I have tried to pair it a few times but nothing changes.
    Ideas?

    wuaw. its done. (:
    i reinstall USB OVERDRIVE and uninstall again. but i do in UTILITIES folder at this time. you should click 'Uninstall USB OVERDRIVE.app' in System Preferences > Utilities folder.

  • My wifi is grayed out and my Bluetooth isn't working (I updated to ios 6 a long time ago and nothing happened till now) what should I do?

    I updated to ios 6 when it first came out and nothing happened till now. My wifi is grayed out and not working and my Bluetooth isn't working too please somone help this is getting annoying. I tried restoring the setting and resetting everything but nothing worked.

    Wi-Fi or Bluetooth grayed out

  • 5S screen is occasionally unresponsive to touch, and interaction is sluggish. All since updating to iOS 8.

    Ever since I updated to iOS 8, and all subsequent updates (currently running iOS 8.1.1) my iPhone 5S is considerably slower. Apps hesitate when I switch between them and sometimes crash entirely. Sometimes my screen is entirely unresponsive to touch and I have to tap numerous times before it works. I have restarted, i've done resets, I've backed up to the cloud, erased phone and restored from back up. The problems still persist.
    Any help would be greatly appreciated.

    FYI. I've chatted with Apple support online. They suggested I backup and restore using iTunes, which I've done already. SO to humor the tech, I did it again. If it doesn't work this time, then I need to bring it into an Apple store to be diagnosed and possible repair/replacement.
    Hope this helps any readers with a similar problem

  • My Ipad Music player doesn't work since updating to IOS 6. It only shows a huge cloud logo

    Hi there
    since updating to ios6 i'm not able to play music on my ipad anymore.
    opening the music player only shows a large cloud with a status bar under it.
    there is no progress however, so maybe i'm doing something wrong.
    please help

    Okay, mine now works here is what I did.
    plug in the iPhone, iPad etc
    in iTunes select the phone or iPad
    Under Summary uncheck "Sync with this....."
    Under "Music" uncheck the "Sync Music"
    Let it remove all the songs, dont worry it will come back no problems.
    Once that is all done all the music on the phone or ipad should be gone.
    Now check them both back on and everything should copy back onto it.
    Working now !!!!!

Maybe you are looking for

  • How to find the enhance pack in my current system

    Hi, We have upgraded from 4.6c to ECC 6.00. How to find out the enhancement pack of my current installation. Thanks in advance Raman

  • How to create a lookup

    Hi All I am working in Oracle Apps R12. How to create a lookup can any one provide me the steps to create lookup I have two tables Per_all_people_f from this table I need to create a lookup with "FULL_NAME" column and the "person_id" in the per_all_p

  • EDGE SIMULATOR CAN'T READ DATA FROM SIMULATION.XML

    HI, i have installed the SES(10.1.3) and before that Application server 10.1.3 . I have followed all the steps given at the following link http://www.oracle.com/technology/obe/1013/fusion_middleware/integration/ses/configuringsimulator/configuresimul

  • Monitor problems imac with mac osx 10.6.3

    I have tested several monitors ( dell 3008wfp and dell 22 inch monitors) with my mac mini, and everytime the same error pops up with my fotographic and medical imaging software: 24 bit colors is not available... with loss of color depth as a result.

  • Hierarchy restriction

    Dear All, I am syncing the query between two system. In the query there is a restriction on hierarchy on particular node,so I am finding very difficulty to find the ame node in the other system, Is there any easy way to do it. Please help. Thanks, Sa