Musicord Cherub MRD-41 Recorder: USB-Driver for Mac

Hello,
I am searching for the USB-Driver for Musicord Cherub MRD-41 Recorder. Searching for it along the internet did not give any matching result.
Originally a CD containing the USB-Driver for Windows was included with the product. Since we now work with Apple-Products this does no longer work. Connecting the device to a Mac (as it is normal these days) and hoping, that it will work without any additional Software does not give any result.
On the Original-CD the manufacturer states, that the USB-Driver for Mac can be downloaded at www.apple.com but there nothing can be found anymore.
The recorder has been bought about 6 years ago (used under Windows then). Now we would like to use it again under Mac-systems (10.6 and 10.7).
Does anyone know, if, and where help can be found?
Thank you very much

If it uses MIDI, Garageband can often read it.

Similar Messages

  • SiLabs USB driver for Mac

    Hi,
    I am making a GPS device which can send 1 PPS (pules per sec) signal to the modem Data Carrier Detect (DCD) pin and then convert from UART to USB using CP2102 (Silicon Labs).
    A windows driver + serial port monitor program can correctly detect a 1 PPS signal being sent to DCD pin. But when I try to read the DCD pin status with the Mac driver (SiLabsUSBDriver) + C code, I could not get any changes from DCD pin.
    This is what I've done.
    #define BAUDRATE B9600         
    #define USBDEVICE "/dev/cu.SLAB_USBtoUART"
    fd = open(USBDEVICE, O_RDWR|O_NOCTTY|O_NDELAY);
    ret = ioctl(fd, TIOCMGET, &status);
    printf("DCD , %d \n", status & TIOCM_CAR);
    The value of status is always 0.
    Can anyone help?
    Andrew

    If it uses MIDI, Garageband can often read it.

  • Is it possible to have two USB drives for the IPad?  I want to bring RAW photo files from my camera, through the IPad and back to an external hard drive.  One of my cameras does not use an SD card.  How can I do this?

    Is it possible to have two USB drives for the IPad?  I want to bring RAW files from my camera through the IPad and out to an external hard drive.  One of my cameras has an SD card but the other one doesn't have a card that would fit in any of the camera devices I've seen on line.  Realted to this, I bought the IPad camera accessory.  Can I put the SD card in the device and also hook the external hard drive to the USB port of the accessory and download from the camera to the hard drive?  Can I put Lightroom or the Nikon photo editing software on the IPad?  Right now I carry a PC laptop and external hard drives with me on wildernes trips.  Internet and WiFi are not available.  Because I shoot so many photos and they're in RAW I need to download from the camera to the external drive because I run out of memory on the PC (and it has much more memory than the IPad).  I have Nikon NX software and lightroom on my PC.  I'd love to be able to reduce the weight I carry by using the IPad to edit my photos each night while on trips.  Is this possible and how would I do it?  I'd appreciate any guidance.

    No, the camera connection kit only supports the copying of photos and videos to the Photos app, it doesn't support copying content off the iPad. For your second camera instead of the SD reader part of the kit, does the iPad to camera cable not work with it for direct transfer to the iPad ?
    For Lightroom and Nikon software again no - you can only install apps that are available in the iTunes app store on your computer and the App Store app on the iPad, 'normal' PC and Mac (OS X) software are not compatible with the iPad (iOS). There are some apps that perform fairly basic editing functions that are available in the store, but nothing as sophisticated as, for example, Lightroom.

  • HT2801 Can I use a USB external DVD drive for mac pc for a ibook g4 to install tiger

    Wondering if I can use a externl disc drive for mac pc for ibook g4

    Many PPC Macs won't boot from USB drives in OSX, but many can be made to...
    http://hints.macworld.com/article.php?story=20060301112336384
    Works with USB1.1 also, but really slow.

  • I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

    I would like to take a iTunes play list and put it on a USB drive for my car radio to stay in my car. Is there a way to do this through iTunes so you have all the song info and there's no number in front of the name of the song? Is there a program?

    iTunes only syncs to Apple devices.
    Assuming the media is not DRM protected, any of the media can be dragged and dropped from iTunes onto other drives (external, flash, etc) as the user chooses.

  • I am confused by the installation step that requires you to create a bootable USB drive for windows installation.  What is the ISO image and why has it selected my Passport backup drive as the destination disc?

    In the bootcamp installation it asks me to create a bootable USB drive for Windows Installation.  To do so, I must choose an ISO image.  What is that?  When I click "choose" I don't understand the options presented.  Is this the destination of the partition or where Windows will reside on the Mac?  Why does it also indicate the the destination disk si my WD Passport Back up drive?

    OK, so I have an apple superdrive hooked up to my mini (along with my Passport back up drive).  I also have  the discs for both 64bit and 32bit Windows along with the product key.  I am still not sure what to do when faced with the options after "choose".

  • Where can i download a usb driver for my revere 3 (model

    I have been trying to download a usb driver for my new revere 3 so I can connect with my 8.1 windows laptop. anyone have an idea where I can find it? The LG site doesn't list any drivers for it

    Mac 101: Printing (OS X Lion)
    Important:
    Your OS X Lion system will either have the necessary printing software already installed, or it will automatically download and install software when the printer is connected or configured. Do not install software that came with the printer as it may be out of date, and do not connect the printer to your Mac yet. Follow the instructions that came with the printer to unpack, install ink or toner, and insert paper.  Finally, use the instructions in this article to connect the printer to your Mac.
    The procedures are identical for Mountain Lion.

  • I  want to make a bootable usb drive for my macbook air,and my ystem is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things

    I want to make a bootable usb drive for my macbook air,and my system is osx mountain lion 10.8.5. How can i download it again without repaying for it so i can make my bootable flashdrive? I'm pretty new at this computer stuff so i don't know how things work.
    Message was edited by: tzaphon

    This is not difficult and you will not have to download from the app store.
    your computer has what is called  a recovery partition that came with it.
    simply hold cmd+R while you boot up. let go a second after you hear the chime.
    you will boot into the recovery partition.
    Use disk utlity to format your usb drive and then exit Disk utlity and go to Reinstall Mountain Lion.
    it will ask  you which disk you want to install ML onto. Choose your new USB drive.
    easy peasy

  • HT201269 how to download apple usb driver  for windows 7 32 bit

    how to download apple usb driver  for windows 7 32 bit

    Try this:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Then install this:
    http://support.apple.com/kb/dl1614
    Windows XP Service Pack 2 or later
    32-bit editions of Windows Vista or 32-bit editions of Windows 7, and Windows 8

  • How to install USB driver for Windows?

    I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
    After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
    When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
    There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
    Can anyone make sense of this for me?

    Orthoducks wrote:
    I'll so my best to answer the questions.
    >...what you're looking to do a transfer with...?
    Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
    Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
    >Also, have you tried any other computers?
    No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
    Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
    >And which software version if your phone currently running?
    That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
    Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
    >Often times, the device drivers you're prompted to install are supported solely by the computer's software.
    I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
    You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
    The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
    Good Luck

  • Cisco USB Driver for Microsoft Windows 7 PC?

    Hello All,
    I want a USB Driver for the USB Console cable which came up with Cisco Router. 
    Note that this USB Console cable has both the sides USB ports ( 1 side of the port goes to USB Console Port of Router and other side goes to USB port of your Laptop)
    I searched on cisco.com. 
    Found the below link:
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6880_x/hardware/installation/guide/b_c6880-X_hig/b_c6880-X_hig_appendix_01001.pdf
    However, when I go to download link, it appears as "Page Not Found"
    I want to try this option and connect my Laptop's HyperTerminal to Router's USB Console.
    Does anyone know the USB driver for this?
    Thanks
    Chinar

    Hi Chinar-
    It looks like this will work with Windows 7.  
    http://software.cisco.com/download/release.html?mdfid=282867574&softwareid=282855122&release=3.1
    DJ

  • HT1478 How do I download my iTunes music library onto an external USB drive for back up purposes?

    I have an external USB drive plugge into my computer. I want to download my iTunes music library onto the USB drive for back up purposes.
    Can't find a method on the iTunes menu. Help.

    See here: iTunes: Back up your iTunes library by copying to an external hard drive
    B-rock

  • I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well?

    I want to install Win7 on my new iMac using bootcamp. I got a USB drive for the win7 install-disc, but I don't own a cd for the Mac OS (since it was preinstalled when I got it). I read somewhere that I need a mac OS disc as well to complete the bootcamp installation of Win7 ?
    I need some recomendations plz.

    Hello,
    you don't need OS X install-disk, but I strongly recomend to burn a Win 7 disk. You may have some problems with installing it from a USB Flash :)
    Cheers!

  • How to Format Toshiba Hard-Drive for Mac with Parallels?

    Hello,
    I recently bought a Toshiba Hard-Drive with the following features:
    500GB
    It is a Canivo Basics 3.0
    It is USB 3.0 and 2.0 portable hard drive
    It has already been formatted NTFS for Windows XP, Vista, 7, and 8
    The box says that it can be reformatted for Mac
    I have a Macbook Pro with Retina Display that I bought this year in late March/early April.
    It runs OS X Mavericks, and Parallels Desktop 9 for Mac.
    I would like to reformat it so that I can use it on my laptop both with Windows and Mac OS at the same time. I do not wish to use a partition as I want to access the hard drive through Mac and Windows at the same time on my laptop and I also want to be able to access the Mac things on a Windows computer and vice versa.
    I have never formatted a hard drive before, and I would like to use a completely safe software, or no software at all, if it is possible.
    I am sorry but I don't have a very high knowledge of this.
    Thanks,
    Sandy-Wood

    It would be easier, using Parallels, just to format the drive for "Mac OS Extended (Journaled)". You can see it both in the Windows/Parallels and the Mac side. Leaving it formatted as NTFS is not going to allow you to access (write to) the drive unless you use third-party software. Formatting it for Mac lets you use it, as I said, on both the Parallels VM and the Mac side.
    If you were using Boot Camp, I would advise leaving it formatted as NTFS and purchasing NTFS for Mac to access the drive on both OS's. You can mitigate that by formatting the drive for Mac:
    Good luck,
    Clinton

  • Samsung ML-1450 Printer Driver for Mac OS 10.5.4

    Hello!
    I would like to get Samsung ML-1450 Printer Driver for Mac OS 10.5.4. The old driver does not work with 10.5.4, Any help would be appreciated!
    Thanks.
    SMalkan

    http://www.samsung.com/us/support/download/supportDownDetail.do?group=&type=&sub type=&modelnm=ML-1450&language=&cate_type=all&mType=DR&dType=D&vType=L&cttID=213933&prd_ia_ cd=&dispnm=ML-1450
    It says it's for 10.2.4 or later or 10.4 (Huh?) but I just tried it and it worked.
    I printed through an Airport Extreme Base Station, but I imagine it should work via USB (or ethernet).

Maybe you are looking for