Must have OS 10.6.5 to be compatible to the iphone 5 but the computer does not recognize the device

I downloaded OS X 10.6.5 in order to sync my new iphone 5 to my mac.  After doing so the computer does not recognize the iphone.  I switched the backup from iCloud to sync to the computer when plugged in but nothing happens.

If the Software Update application is not in your Applications folder, then apparently you've inadvertently done away with it. Downloading and installing the standalone Combo Update, as the previous poster has suggested, may install a new copy of it. If it doesn't, you can reinstall it from your original OS installer DVD using Pacifist:
http://www.charlessoft.com/

Similar Messages

  • TS1369 My iPod classic displays the apple logo, then shows a large red "X". I have repeated the list of steps several times, but my computer does not recognize the iPod. Does this mean my iPod will not work again?

    My computer will "wait for the iPod", then begin to prepare it for recovery, but the process does not follow through. I've tried a few procedures to reset my iPod, and connect it to the PC, but even with repeating them, it fails. What must I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have installed the new i OS 7 on my IPAD, I am having trouble with sending messages.  I reset the imessage and networking as I did for the iphone but it still does not allow messages to be deleivered.  any suggestions?

    I have installed the new iOS 7 on my I Pad and am having trouble with messaging, I reset the imessages and networking and the messages are still not being deleivered.

    Reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • I have an iMac in which I installed a virtual machine to run some MS applications including MS Money. in virtual machine mode the computer does not recognize the USB pen which contains my MS money back up and therefore I can't import the data to the iMac.

    What should I do?

    What virtualization app do you use ?
    Parallels, VMWare Fusion or VirtualBox ?
    For Parallels: choose Preferences form the Parallels Desktop menu -> then USB and set it to your liking.
    For the other two it should be a similar procedure (don't use them myself).
    Stefan

  • Have a new computer with a different name.  New computer does not reconize the ipod classic device?

    Have a new computer with a different name.  New computer does not recognize the ipod classic device? How can I remody this problem

    Add '''DOZEN''S''''' of giggs of ram, switch from hard disk to SSD or add inline SSC.
    Consult some free experts about potential malware infestation: BleepingComputer.com
    In windows control panel is an option to rate performance of your computer. What number does the applet rate your computer?
    http://windows.microsoft.com/en-US/windows7/What-is-the-Windows-Experience-Index

  • My IPOD froze while downloading the update of IOS 5 now I have a screen that has the blue itunes logo and the USB connector. when I connect to my computer it does not recognize the Ipod?

    My Ipod froze while downloading a software update from Itunes.. now I have a screen with an Itunes logo and the USB cord and my computer does not recognize the Ipod??

    See Here for,
    Device Not Recognised
    For PC
    http://support.apple.com/kb/TS1538
    For Mac
    http://support.apple.com/kb/ts1591
    And Here for,
    Unable to Update or Restore
    http://support.apple.com/kb/HT1808

  • The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library.  Now getting synch must erase setting! Help

    The new version of iTunes does not recognize my Ipod-prior to this version, had no problem, Ipod showed up as list under the Imac library.  Now getting synch must erase setting! Help

    well nobody bothered to give me a hint on what to do, maybe because the problems with the new version of iTunes are really a lot, there is an enormous amount of people out there that have all sort of different problems including mine  so I have decided to return to the previous version which works fine and wait untill the apple people come up with a decent product ....

  • I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

    I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

  • Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch.  :(

    Is there another way to close apps other than deleting them from the multitask bar.....I have a small crack in the bottom of my screen and that part of the screen does not recognize the touch. 

    There's generally no reason to be closing them that way at all. The apps you see in the recents bar are just that, apps that you used recently. Most of them are doing absolutely nothing. The only apps that are really doing anything in the background are ones that play music and ones that are using location services. Just leave them be.
    Best of luck.

  • I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

    Hey Stan1958,
    Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Thanks,
    Matt M.

  • I have a new time capsule (replace my old time capsule).  I want to erase my old one.  My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem)

    I have a new time capsule (replace my old time capsule).  I want to erase my old one.  My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem).  I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge.  So,
    1.  why doesn't my cmputer see the old TC
    2  once i have solved that, how do I erase the old one
    3.  Can I use the old one as a supplemental hard drive
         a.  wired?
         b. wirelessly?
    4.  Can I use the old one as a range extender?
    I know .. a lot of questions but I would appreciate any help.
    Thanks

    sgetraer wrote:
    I have a new time capsule (replace my old time capsule).  I want to erase my old one.  My computer does not see the old one anymore, how do I connect it (the old TC is not connected to modem).  I want to erase it and then use it as either a second hard drive (sired/sirelesly?) or as a hard drive/bridge.  So,
    1.  why doesn't my cmputer see the old TC
    2  once i have solved that, how do I erase the old one
    3.  Can I use the old one as a supplemental hard drive
         a.  wired?
         b. wirelessly?
    4.  Can I use the old one as a range extender?
    I know .. a lot of questions but I would appreciate any help.
    Thanks
    1. Because it is either the same IP as the new one or hidden by being plugged in as a second router.
    To access it, isolate one computer from the existing network and plug it directly by ethernet to a lan port of the TC. Use the erase function in the TC to remove all the content of the hard disk.
    Then go to the internet tab, connection sharing and select off bridged. You can then reconnect the TC to the network.. and the computer as well. The TC will act as bridged device.. getting IP from the main router and should then appear correctly in Airport utility.
    2. I covered in 1. But you just go in airport utility manual setup. disk, and you will see the erase function. You can also set it to bridge and leave the erase until you put it back in the network.. but be careful you erase the right one.
    3. You can use the old TC via wired or wireless.. although I would always stick to wired connection if possible. Speed on wireless is 10x worse than wired.
    Also note the reliability goes down dramatically after 2 years.. a series 1 3 years old or more is ebay fodder unless you want to repair it. Do not trust vital data to it.. when it dies you will have issues recovering it.
    4. Yes, all apple routers will function as wireless extenders. when you do that the ethernet ports turn off so it becomes a purely wireless device.. strange apple decision on what you want to use your TC for.

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • Connecting to Time Capsule via ethernet but my computer does not have an IP address

    I'm connected to internet w/Airport TC.
    I want to connect via ethernet for fast and stable backup. When I connect the ethernet cable what I see is "The cable for Ethernet is connected, but your computer does not have an IP address". I don't want to mess up with my connection. What should I do?

    Thanks for your response Bob, I found a way to resolve my issue.
    I'm connecting to internet via wireless modem. TC is connected to that wireless modem via wired ethernet connection and functions as a router - I guess - so our Apple devices connect to the network.
    I had disabled WiFi earlier, since I wanted to connect to TC via ethernet. I realized I somehow needed to have the connection re-enabled WiFi but change the connection order, so ethernet is at the top of the list.
    It might have been some other things I did, like trying to imitate config samples I found on the net by typing 255.255.255.0 and 192.something.something.0...etc.
    Not sure exactly what made it work, but eventually, I believe I managed to connect and transfer many gigs of data over to TC with ethernet but it still took soooooo long.
    Thanks,
    Vanmoose

  • Somehow my calender was erased. How do I restore it? I have time machine. Fortunately it was synched with Outlook, so I still have it there. But Ical does not recognize the Outlook file. Is there a way to restore from Outlook? resi

    Somehow my calendar in iCal was deleted. It was not archived. I have Time Machine. How do I restore? Fortunately it was synched to Outlook, so it is not lost. I would like to out it back in iCal but iCal does not recognize the Outlook file.

    Thank you. It's all back to normal (took around 7 hours on the late 2009 iMac). Time Machine's become better now compared to the last time I used it to migrate everything automatically (Snow Leopard days). With Maverick's Time Machine, it's almost like a cloning (except for the password) tool now. But it's always great to name the account and maybe the hardisk the same names so can just replace a newly installed OS.
    God bless. Thanks again.

Maybe you are looking for

  • Acrobat Pro 9 PDF Printer Hangs when printing Test Page (Checking Fonts)

    I have upgraded to CS5 and acrobat pro 9.... When I print a test page from the PDF printer it starts fine but then hangs when checking fonts?!?! I have removed the software and reinstalled twice now and the same occurs... Any advice anyone?

  • Webservice for File Scenario

    HI Everyone,      Can i develop a webservice using .net platform for a file to file scenario using XI. How do i proceed. I know how to configure file to file scenario using XI, but how shd i replicate the same scenario as webservice. Any valueable in

  • Mail not showing up in Mac mail and iphone (Sky email UK)

    Hi, This relates to a post from yesterday which I thought was solved, if only- ! If I check my mail on iphone it doesn't show up later in Mac mail. I have 5 accounts set up. 3 work fine, 2 don't. My Sky email account and a domain account that is set

  • Image rollover in webapps

    HI all I'm stuck. I have a web app with two different image states which I want to use as standard and on hover in the list view. Normally to achieve this I would set a css class for the two images like so: .playing{ width: 195px; height:450px; displ

  • TS1373 when charging the battery icon doesn"t move at all and i can't reset

    hi my ipod can not be recharged the icon won"t move and it keep showing the sad icon. what to do? i can't reset either