Must I define abstract interfaces with different names for BPM?

Must I define abstract interfaces with different names for BPM?
When interface appeared several times with different values and usage.
Of course they are the same message type.

Hi,
Check this
RFC Scenario using BPM --Starter Kit
Regards
Seshagiri

Similar Messages

To create multiple files with same content but with different names

Hi SapAll.
here i have got a tricky situation on Idoc to File Scenario.
in my interface of an Idoc to file ,there is requirement to create multiple files with different file names but with same content based on one Idoc Segment.
which means there will be one Zsegment with two fields in the idoc,where one field with (content refers to the name which file name should start with .so lets say if this segment is repeated for 3 times then PI should create 3 files in the same directory with same content but with different file names (from the filed).
so here for now iam using one reciever file communication channel.
can any body give me the quick answer.
regards.
Varma

What do you mean by different names?
when i make proper setting in the Receiver Channel....on how to create the filename (what to append) like add Timestamp, counter, date, messageid.....even in this case you will ahve file with different names and that too from same File channel.
You can perform multi-mapping in XI/ PI and then your File channel will place the files in the target folder with relevant names. You cannot use Dynamic Configuration with Multi-Mapping!
If you intend to use different File channels, then do the configuration as required (normal)...even over here you can follow multi-mapping.
Do not use a BPM!
Regards,
Abhishek.

Copying a script name with different name

Hi,
I want to copy my script form which has name zform1. Now i want to copy the same script form with different name i.e zform2 in the same client.
in my se71 window i do not have a copy icon on the toolbar.
pls. help me on how to do this.
Thanks,
Rose.

Hi,
Please follow the steps below :-
1. Create a SCRIPT with the new name and just save it ( No need of defining any windows, just shot description is enough).
2. Open the newly created script in change mode and go to the tab 'Form' and press 'Copy from..' .
3. A small wondow will pop up, wherein you need to enter your previous SCRIPT name.
4.Once done, your script will be copied.
Please reward points if helpful.

Same SKU with different names in 2 systems

Hello All,
I am wokring on a SNP scenario. We have a finished sku A and its sub component sku C.
A (FERT) ---> C (RM)
We have forecast on sku A and want to find dependent demand in sku C thru SNP
Forecast A -
> Find Dependent Demand C
sku A maintained in ERP1 R/3 system as FERT
sku C maintained in ERP 1 R/3 system with different name sku B as Raw material
sku C maintained in ERP2 R/3 system as FERT
Now product A is maintained in one R/3 system and product C is in another R/3 system. Both these R/3 systems are connected to APO and both these materials are also in APO now.
After heuristic planning in SNP, we want to pass the dependent demand to ERP2 system as Sales Order.
My concern is if sku C has different name in 2 systems, how should I pass the demand to other system?
Please advice.
Thanks,
Sanju
Message was edited by:
Sanju

Maybe you can create SKU D in APO (and R3) which is lined through PPMs or PDS to SKU B from ERP1 and SKU C from ERP2 and aggregate the dependent demand generated during Heuristics to SKU D
then you can only transfer only SKU D to ERP2? Am not sure how important it is for you to hav the link between SKU D and SKU c in ERP2
Alternately
Dont transfer SKU C from ERP2 to APO. Only create Dependent demand for SKU C from ERP1 and transfer it to ERP2. You can run MRP again in ERP1 for the aggregated requirement (unless you want some APO specific functionality, the result must be close to what you will get in APO)

Modify Batch Sequence to generate two reports per UUT with different names.

I have a special situation for the batch model.
Each UUT consist of two separate products that must be tested as a single unit.
I can run each UUT and generate a test report for each. - aka. The standard use case works great.
However we are keeping records using this method. So I need a separate copy with a different name for each run.
The idea behind this is that we might have a running history for each half of the UUT. Since the two halves will probably never meet again.
I have looked at the BatchModel.seq and read some of the documentation, however I am having a hard time figuring out what is going on.
I assume the Highlighted Items above are where the UUT Reports are generated. I do not however know the mechanism for giving them the names from the Report Options->Report File Pathname menu or how to change it between those points in time. Also is there any tricks to getting duplicate Report with a diffrent path put into this setup.
Any links to relevant information would be useful. Thanks
Solved!
Go to Solution.

Just copy those two steps and between them and the copies have another step that is just a Statement. In there you can change the report path by setting parameters.TestSocket.ReportFilePath to the new path.
Ideally what you would do is have the client set it by using a callback. So your code would look like this:
Write UUT Report
Write UUT Report (on the fly)
Set Report Path Callback (override in client OR statement step)
Write UUT Report
Write UUT Report (on the fly)
Hope this helps,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

Export schema and import with different name

Hi ,
I need your assistance guys,
I need to export a schema from a database and then import it with different name to another database. How can I do that?
I export it with the following command:
exp userid=system/PW file=May_02_Export.dmp log=May_02_Export.log owner=schema_name statistics="none"
Now I want to import it but with different name (schma_name).
Regards

Did you try FROMUSER and TOUSER option ?
E:\oracle\product\10.2.0\db_1\install>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat May 2 20:01:09 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size                  1247900 bytes
Variable Size              71304548 bytes
Database Buffers           92274688 bytes
Redo Buffers                2945024 bytes
Database mounted.
Database opened.
SQL> create user fromuser identified by fromuser;
User created.
SQL> grant resource, create table, create session to fromuser;
Grant succeeded.
SQL> create user touser identified by touser;
User created.
SQL> grant resource, create table, create session to touser;
Grant succeeded.
SQL> conn fromuser/fromuser
Connected.
SQL> create table export_table(a char);
Table created.
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
E:\oracle\product\10.2.0\db_1\install>exp fromuser/fromuser file=e:\a.dmp
Export: Release 10.2.0.1.0 - Production on Sat May 2 20:03:06 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user FROMUSER
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user FROMUSER
About to export FROMUSER's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export FROMUSER's tables via Conventional Path ...
. . exporting table                   EXPORT_TABLE          0 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting materialized views
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
E:\oracle\product\10.2.0\db_1\install>imp help=y
Import: Release 10.2.0.1.0 - Production on Sat May 2 20:03:47 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
You can let Import prompt you for parameters by entering the IMP
command followed by your username/password:
     Example: IMP SCOTT/TIGER
Or, you can control how Import runs by entering the IMP command followed
by various arguments. To specify parameters, you use keywords:
     Format: IMP KEYWORD=value or KEYWORD=(value1,value2,...,valueN)
     Example: IMP SCOTT/TIGER IGNORE=Y TABLES=(EMP,DEPT) FULL=N
               or TABLES=(T1:P1,T1:P2), if T1 is partitioned table
USERID must be the first parameter on the command line.
Keyword Description (Default)       Keyword      Description (Default)
USERID   username/password           FULL         import entire file (N)
BUFFER   size of data buffer         FROMUSER     list of owner usernames
FILE     input files (EXPDAT.DMP)    TOUSER       list of usernames
SHOW     just list file contents (N) TABLES       list of table names
IGNORE   ignore create errors (N)    RECORDLENGTH length of IO record
GRANTS   import grants (Y)           INCTYPE      incremental import type
INDEXES import indexes (Y)          COMMIT       commit array insert (N)
ROWS     import data rows (Y)        PARFILE      parameter filename
LOG      log file of screen output   CONSTRAINTS import constraints (Y)
DESTROY                overwrite tablespace data file (N)
INDEXFILE              write table/index info to specified file
SKIP_UNUSABLE_INDEXES skip maintenance of unusable indexes (N)
FEEDBACK               display progress every x rows(0)
TOID_NOVALIDATE        skip validation of specified type ids
FILESIZE               maximum size of each dump file
STATISTICS             import precomputed statistics (always)
RESUMABLE              suspend when a space related error is encountered(N)
RESUMABLE_NAME         text string used to identify resumable statement
RESUMABLE_TIMEOUT      wait time for RESUMABLE
COMPILE                compile procedures, packages, and functions (Y)
STREAMS_CONFIGURATION import streams general metadata (Y)
STREAMS_INSTANTIATION import streams instantiation metadata (N)
The following keywords only apply to transportable tablespaces
TRANSPORT_TABLESPACE import transportable tablespace metadata (N)
TABLESPACES tablespaces to be transported into database
DATAFILES datafiles to be transported into database
TTS_OWNERS users that own data in the transportable tablespace set
Import terminated successfully without warnings.
E:\oracle\product\10.2.0\db_1\install>imp system/oracle fromuser=fromuser touser=touser file=e:\a.d
Import: Release 10.2.0.1.0 - Production on Sat May 2 20:04:20 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.02.01 via conventional path
Warning: the objects were exported by FROMUSER, not by you
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing FROMUSER's objects into TOUSER
. . importing table                 "EXPORT_TABLE"          0 rows imported
Import terminated successfully without warnings.
E:\oracle\product\10.2.0\db_1\install>sqlplus touser/touser
SQL*Plus: Release 10.2.0.1.0 - Production on Sat May 2 20:04:36 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> desc export_table
Name                                      Null?    Type
A                                                  CHAR(1)
SQL>HTH
Aman....

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

Hi All, I am using iphone in UAE and ipad in India usinging same apple id. Earlier I could do imessage to my Ipad with different name but with software update,I am unable to do, as signing id for the iphone and ipad is same.How to restore back

I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
Manage your Apple ID and see if that does the trick
Hope that helps

TS4009 I seem to have 2 iCloud accounts with different names - a free storage that came with my Macbook and one I used when I bought some iCloud space. How can I cancel the free account?

I seem to have 2 iCloud accounts with different names - a free storage that came with my MacBook and one I used when I bought some iCloud space. How can I cancel the free account? Because of this I can't access iMatch and the ICloud account I paid for on my MacBook
Any ideas cos its frustrating that I can't access something I paid for!

Sign out of the account you do not wish to use, sign into the one that you do wish to use.

Install many executable on the same PC with different names

Hello,
I'm trying to install several executables with different names in the same computer but at the end of install process the message is : "an higher or existing version is already installed in this computer"
I create the Executable and Setup with LabVIEW Application Builder and install the executable in the same Program Files root directory with a different sub-directory for each executable as this : Program Files-->MyProject-->SubProjet1 with exe1/SubProject2 with exe2 etc...
My OS is WinXP pro SP2 and I work with LabVIEW 8.5.
Thanks and regards,
Armindo PINTO

Hi Armindo,
Thank you for using the NI forums!
From what I understand, you are trying to create multiple executables of a vi project to co-exist on the same PC. Any time you re-use the LabView 8.x project file, it will generate
install package with the same product ID number. That means, if the
deployed PC has the previous version installed, which had been
generated from the same project file, the new install package will
remove the previous version and overwrite it with the new version. Or as in your case, not allow you to install lower versions of the executable. That
means, the previous version will be no longer available on the deployed
PC. If you are creating an upgraded version to the product this is
fine.
However, if you need to re-use the LabView 8.x project
file and generate a new product, which can potentially co-exist with
the previous on the end user PC, you need to generate a new installer
with a different product ID number. One of the way to do it:
Copy existing project file (e.g. "name1.lvproj") under a different name (e.g. "name2.lvproj")
Open the new instance of the project
Expand the "Build Specifications"
Right click on the installer specification, e.g. "name1 Installer"
Select "Duplicate" from the menu
You can now delete the instance "name1 Installer" and rename the "Copy of name1 Installer" to a suitable name, e.g. "name2 Installer"
Make changes that are needed between the two versions, for example:
Select a new source VI
Build a new exe file
Reflect the new exe file in the "name2 Installer"
Make
any other changes needed in "name2 Installer", for example different
documentation files included in install, change in the target install
directories, changes in the start menu shortcuts. etc.
Build the install.
Please let me know if this solves the issue, and let me know how you get on.
Kind regards,
Ashish Naik
Field Sales Engineer
National Instruments UK

Sending attachment with different name

Hi,
is it possible to send attachment with different name with javaMail?
If possible, is there a sample code to do it?
Thanks.
Edited by: user1071181 on Aug 6, 2011 2:14 PM

Hi,
I listed some of my code at below.
But i did not find attachFile method for messageBodyPart class.
BodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setDataHandler(new DataHandler(new MemoryDataSource(....getPDFObject())));
messageBodyPart.attachFile("abc.pdf");
messageBodyPart.setFileName("abc_2011_08_07.pdf");
messageBodyPart.setHeader("Content-Type", "application/pdf");
multipart.addBodyPart(messageBodyPart);
message.setContent(multipart);

Look for files with different names

Do we have any utility or command in solaris 8 where we can check for files in two folders with different names and display them somewhere? Manual search for such files becomes very difficult when there are a large number of files in the folders. Please suggest.

Check with an Unix forum like http://www.unix.com

Unable to copy database with different name in the same instance

I had a huge database and wanted to try some change optimization changes.
So wanted to make a copy of the database along with data in the same instance.
I have tried copy database wizard several times but always see the error as in attachment.
Can someone let me know how to troubleshoot further?
If this is not the correct way please suggest how do i copy a database with different name in the same instance along with data.

Hi Nandu,
From the screenshot, the error 1813 happens when corrupt database log is attempted to attach to the SQL Server. To work around this issue, please preform the following steps, for more details, please review this
blog.
1. Create a new database with same name which you want to recover. Make sure that the MDF file and LDF file have same name with previous database data and log file.
2. Stop SQL Server. Move original MDF file from old location to new location by replacing just created MDF file. Delete the LDF file of new location just created.
3. Start SQL Server. At this point, the database is in suspect status.
4. Make sure that system tables of Master database allows to update the values. Please note that you will be performing this in query window.
Use Master
go
sp_configure 'allow updates',1
reconfigure with override
go
5. Change database mode to emergency mode.
SELECT *
FROM sysdatabases
WHERE name = 'DatabaseName'
BEGIN
UPDATE sysdatabases
SET status = 32768
WHERE name = ' DatabaseName '
COMMIT TRAN
6. Restart SQL Server. Then execute the following DBCC command in query window to create new log file.
DBCC TRACEON (3604)
DBCC REBUILD_LOG(databasename,'c:\yourdatabasename_log.ldf')
GO
7. Reset the database status using following command.
sp_RESETSTATUS yourdatabasename
GO
8. Turn off the update to system tables of Master database running following script.
USE MASTER
GO
sp_CONFIGURE 'allow updates',0
RECONFIGURE WITH OVERRIDE
GO
9. Reset the database status to previous status.
BEGIN
UPDATE sysdatabases
SET status = (value retrieved in first query of step 5)
WHERE name = 'DatabaseName‘
COMMIT TRAN
GO
Make sure that you have done all the steps in order and restarted SQL Server where it is mentioned. Also run SQL Server Management Studio as administrator.(Right click-> Run as Administrator)
Thanks,
Lydia Zhang

Define depreciation areas with different fiscal yr variant under 1 cod.

Hi FICO Gurus,
I am a new student in FICO, here i have a question as following, ask for help,
Does anyone know how to define depreciation areas with different fiscal year variant under one chart of depreciation?
Such as:
Book Keeping Fiscal Year Variant 1: Jun-15-2007 to Jun-14-2008, Non-Calendar Month
Tax Calculation Fiscal Year Variant 2: Jul-01-2007 to Jun-30-2008, Calendar Month
So far as I know, SAP provides Specify Different Fiscal Year Variants on Depreciation Area. But it requires the same starting date and ending date for fiscal year variants.
Right now, the scenario here is different book fiscal year variant and tax depreciation fiscal year variant with different time span.
Does Anyone know feasible and tested solutions?
Any responses will be awarded.
Thanks a lot!
Samson

I believe - and this is only my belief - (haven't tried it before) - you can define Depreciation Areas like you wanted.
Broadly, the steps to do this would be:
Create a Chart of Depreciation and create two Depreciation Areas within this for your Company.
The chart of Depreciation will be assigned to the company code level, so you are okay there.
Now create a FYV corresponding to the June 15 - June 14 depreciation year and assign these to the Company Code using the menu path:
Asset Accounting --> Valuation --> Fiscal Year --> Fiscal Year Variants --> Specify other versions on Depreciation Area Level.
Here, pick your company code and you should see both the areas assigned to it. Assign the FYV as required and then check to see if it works.
Like I mentioned before, this is only a random thought. Haven't tried this before.
Cheers.

Save Task with Different name in workspace

Hi,
While using SAVE button in workspace, is there a way to save tasks with different names?
steps:
      1) Click on start Process in workspace - Complete task order
       2) Click on save button with some data.
                  - Is it possible to change the name here?
if there are 50 tasks named "Complete task order" in To-do list, users want the ability to rename task.
Any help is appreciated.
Thanks,
Krishna

Hi,
While using SAVE button in workspace, is there a way to save tasks with different names?
steps:
      1) Click on start Process in workspace - Complete task order
       2) Click on save button with some data.
                  - Is it possible to change the name here?
if there are 50 tasks named "Complete task order" in To-do list, users want the ability to rename task.
Any help is appreciated.
Thanks,
Krishna

Upload bank statements interface(with different layouts)

HI
My component is upload bank statements interface(with different layouts) .
to which module it belongs exactly.And how to proceed with this....
plz give u r sugessitions.................
pavan kumar

firstly go through the documentation and TRMs
if you have any doubt in the coding . the send the code and errors encountered
so, that we can help you.

Must I define abstract interfaces with different names for BPM?

Similar Messages

Maybe you are looking for