MUT-03010 during installation on SUN solaris

Hi,
I am trying to install a 4.7 system with DB2 on a Sun Solaris server.
In the database installation on u201CDB2 UDB update database configuration before loadu201D stage, I keep getting the following error:
ERROR 2008-07-22 13:49:09
CJSlibModule::writeError_impl()
MUT-03010 Execution of the command "db2 -tvf update_db_cfg.sql -r update_db_cfg.res -z update_db_cfg.out" finished with status TST_ERROR.
I couldnu2019t find any reference to this issue anywhere.
I tried dropping the database & restarting but that didnu2019t help.
Thanks for your help.
Yoav Zilberman

Hi Yoav,
SQL1390C The environment variable DB2INSTANCE is not defined or is invalid.
please check your environment settings.
The SAP processes will find the DB2 CLI libraries either through
(1) >= 7.00 kernel only
/usr/sap/<SID>/global/db6/ ( default path for DB2 CLI driver )
(2)
DB2INSTANCE = db2<dbsid> ( DB2 runtime client )
In this case the instance directory ~$DB2INSTANCE/sqllib needs to exist .
(3) >= 7.00 kernel only
DB2_CLI_DRIVER_INSTALL_PATH ( CLI driver path )
If none of those can be applied. The libraries may be found using the LD_LIBRARY_PATH .
In this case the libraries can be loaded but the message files can not be found and every SQL error results in SQL10007N .
Regards
 Frank

Similar Messages

Oracle 10g R2 installation on sun solaris 10 Sparc machine

Hi there,
I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
Error encountered:
Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
Checking installer requirements...
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
Passed
Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
Continue? (y/n) [n]
The following were the steps taken before encountering the above error
1. logged into a workstation
2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
3. keyed in the following at the command prompt
DISPLAY=machine_name:0.0; export DISPLAY
4. executed the following from the command prompt
./runInstaller
Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
Please help me with this problem.
Thank you
Ravindran Kanniah

It is because of UNIX shell. I also faced this error during installation.
First check your shell by the following command.
$ echo $SHELL
Then select the below.
For csh shell
$ setenv DISPLAY 192.168.1.128:0.0
$ export DISPLAY
For sh,ksh and bash
$ DISPLAY=192.168.1.128:0.0
$ export DISPLAY
After you do this check the value of DISPLAY variable.
$ echo $DISPLAY
If the DISPLAY variable is set then run ./runInstaller.
One advice: Keep a complete log of your terminal session. This will help you in future :)
-aijaz

Installation problem sun solaris 9 x86 on intel

I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
BooT Panic: trap type e, error 0 at 117499
Cr0: 800000011, cr1: 4, cr3: 17e000
Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
Entering boot debugger:
Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
Kalpesh Mehta

I had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
Hope this problem will be fixed in subsequent Sol9 releases.
Victor

Siebel 8 installation on Sun Solaris 10 - Siebel server failed

Hi Expert,
I am currently installing Siebel 8.0.0.0 on Sun Solaris 10.
I had successfully configured a New Gateway Name Server, a New Enterpise in a Gateway Name Server and a New Siebel Web Server Extension Logical Profile.
Then, I tried to configure a Siebel Server, however the result of that is Execution Failed and popup the following error message:
Setup.product.install, Utility, err, unable to launch: "ksh export LD_LIBRARY_PATH=/siebel/siebelv8/siebsrvr/lib;PATH=${PATH}:.;/var/tmp/isjAAAC8aGVc/bin/java -Dtemp.dir=/var/tmp -cp /siebel/siebelv8/siebsrvr/bin/setup.jar run -args LANG=ENU REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebelv8/siebsrvr/admin/siebel_server_sia.scm" error code: "255"(SBL-STJ-00152)
I have tried to uninstall Siebel and re-install Siebel couple of times. I got the above same error all the time.
Searching on supportWeb, I don't find much information regarding "error code: "255"(SBL-STJ-00152)"
Does anyone know what does "error code: "255"" mean?
Does anyone have any ideas on how to resolve it?
Appreciate all your help.
Thanks in advance!!

No....I don't find any port conflict.
However, in the log.txt I saw the following error at the beginning of the log:
(Apr 30, 2008 11:03:40 AM), Setup.product.install, Utility, msg1, Launching: hostname
(Apr 30, 2008 11:03:41 AM), Setup.product.install, Initialize, err, Unable to determine OS Service Level.(SBL-STJ-00176)
ServiceException: (error code = 305; severity = 0)
(Apr 30, 2008 11:03:55 AM), Setup.product.install, Utility, msg1, Launching: ksh -c env | grep SIEBEL
(Apr 30, 2008 11:04:18 AM), Setup.product.install, Utility, msg1, Launching: groups
(Apr 30, 2008 11:04:19 AM), Setup.product.install, Utility, msg1, Launching: groups
(Apr 30, 2008 11:06:03 AM), Setup.product.install, Utility, msg1, Launching: ksh -c uname -r
(Apr 30, 2008 11:06:03 AM), Setup.product.install, CheckPrerequisites, err, Solaris.Base.OS required version 5.9, version found: 5.10
(Apr 30, 2008 11:06:03 AM), Setup.product.install, CheckPrerequisites, wrn, Solaris.Base.OS is not installed. Sun Solaris 9 or above is required to install Siebel Applications
(Apr 30, 2008 11:06:05 AM), Setup.product.install, ConfigureBuildType, err, ServiceException: (error code = 315; message = "product bean Db\CONFIG does not exist"; severity = 0)
(Apr 30, 2008 11:06:05 AM), Setup.product.install, ConfigureBuildType, err, ServiceException: (error code = 315; message = "product bean Eai\CONFIG does not exist"; severity = 0)
Not sure if that is a problem but the installation went fine.
Just when I tried to configure Siebel Server, I got the execution failed with the error that I mentioned in my first posting.

Hardware system specifications for 11i installation on Sun Solaris

Please advise the hardware system requirements like CPU(s), CPU speed advised, disk space, memory, etc for proper performance of 11i on a Sun Solaris machine.
Thanks
Prasad

YOU HAVE TO SET THE UNIX VARIBLE DISPLAY=hostname:0.0; export DISPLAY
and then execute "xhosts +" before starting the Rapidwiz.
<BLOCKQUOTE>quote:<HR>Originally posted by Ketul Trivedi ([email protected]):
We are trying to do fresh installation of Oracle Financials 11i using rapid install. Rapid install asks for all parameters (APPL_TOP, COMMON_TOP, etc) and then at one point of it will ask to save the installation script or to start the installation with rapid installer.
We opted for creating the installation scripts and the first line in the script is:
su oracle -c "/apps/stageing/disk1/orclapp01/rapidwiz/../install/runInstaller -responseFile /apps/oracle/installInfo/rapidinstall/tellme/agniorawdb.rsp"
We get following error while running this:
# su oracle -c "/apps/stageing/disk1/orclapp01/rapidwiz/../install/runInstaller
-r
esponseFile /apps/oracle/installInfo/rapidinstall/tellme/agniorawdb.rsp"
Initializing Java Virtual Machine from ../stage/Components/oracle.swd.jre/1.1.8.10/1/DataFiles/Expanded/jre/solaris/bin/jre. Please wait...
Xlib: connection to ":0.0" refused by server
Xlib: Client is not authorized to connect to Server
java.lang.InternalError: Can't connect to X11 window server using ':0.0' as the
value of the DISPLAY variable.
at sun.awt.motif.MToolkit.<init>(Compiled Code)
at java.awt.Toolkit.getDefaultToolkit(Compiled Code)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.getImage(Compiled Code
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<init>(Compiled Code)
at oracle.sysman.oii.oiic.OiicInstaller.main(Compiled Code)
Any one have any idea?
Would appreciate response.
Thanks,
Ketul.<HR></BLOCKQUOTE>
null

Oracle 9i Installation on Sun Solaris

Can somebody help me find/provide the list of patches that need to be applied at the operating system level on Sun Solaris for 9i instllation? Please send me a URL if anybody knows where to find the list?
Thanks

go to this URL below and find a short list document for Oracle9i on Solaris.
http://www.dbspecialists.com/

Error (MUT-02041) during Installation of Enterprise Portal 6.0

Hi,
I have got a serious problem during the installation of SAP EP 6.0.
Background Information:
I succesfully installed Netweaver '04 Web AS Java 6.40 system. Operating System is Red Hat Enterprise Linux 3. SAP Database is MaxDB 7.50.
Problem Description:
During step 2 (Deploy JDBC Libraries) of the portal installation process the installation routine stops with error code MUT - 02041.
Complete Error Message:
MUT-02041 SDM call of deploySdaList ends with returncode 4. See output of logfile /tmp/sapinst_instdir/NW04SR1/EP/EP/callSdmViaSapist.log.
Output of Logfile:
Error: Aborted: development component 'com.sapportal.datadirect'/'sap.com'/'SAP AG'/'609.20041012102246.0000':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: Error: Cannot connect to HOST: [CG-DEV-SERVER] with user name: [Administrator]
Check your login information.
Exception is: com.sap.engine.services.jndi.persistent.exception.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: User not authorized.]
Error: -
At least one of the Deployments failed -
What I tried do solve the problem:
I used the Visual Administrator tool to check the user "Administrator". (I used the user "Administrator" to connect to the J2EE Engine - localhost, port 50004).
Administrator is not locked, is member of group Administrators, member of group Authenticed Users, member of group Everyone, is valid until year 2500 and has 80 succesful logon counts.
The user looks fine to me. I do not know what else I could check to solve the problem. Anything I forgot to check? I am grateful for any kind of help (pointer to docs, advise, step by step solution).
Cheers Martin
Message was edited by: Martin Kellermann

Hi,
here an uodate of the progress I am making to solve the problem described above.
Due to the output of the logfile (User not authorized), I think the "Administration" user does not have enough rights to perform the required actions needed for the installation.
Well, I looked it up (Visual Administrator --> Cluster --> Server 0 ... --> Services --> Security Provider -->Runtime --> Policy Configurations --> "service.naming" in "Components" List --> Security Roles).
According to http://help.sap.com/saphelp_webas630/helpdata/en/de/83343ecc7f892ee10000000a114084/frameset.htm, all users and groups that are granted permission "jndi_all_operations" can perform all operations available in the naming system.
I checked and found out that jndi_all_operations is merely a role reference to security role "administrators". Group "Administrators" is assigend to security role "administrator". As I mention before, user "Administrator" is member of group "Administrators". I think user "Administrator" has been granted all required permissions.
Am I wrong, what else could cause such an error message! Need some guideance.
Martin

BC4J runtime installer for Sun Solaris

Hi,
I dont know where to find the right release for BC4J runtime installer on Solaris OS.
i have installed :
1 - Oracle 9iAS 1.2.2.1 on Solaris
2 - OC4J Containers for J2EE Applications
And i would like to deploy my application developed under Jdeveloper9i using BC4J.
i find this link http://download.oracle.com/otn/nt/jdeveloper/bc4j-ojsp.tar.gz
but i wonder if this is the right version for Solaris and not for NT.
thank you very mutch

yes, it is working on solaris, thank you very mutch sir.
i still have a problem with the dployment on BC4J project on 9iAS (Solaris ).
i have tow projets under my worspace. the first one contains all my BC4J and the second contains the client (JSP pages ).
i need exactly a clear procedure to deploy my extranet.
Thank you for your help.
EL Bachir.

Couldn't crate task file; SAP R/3 4.7 Installation, ORacle9i, Sun Solaris

Hi all
Am doing Remote instllation through Windows desptop.
While installing Database instance at Database load (Porst Processing) step encountered error MSC-01004, Couldn't crate task file /oracle/SID/ora<sid>/sapdata/SAPSSEXC.TSK.
Details are :
User: Root
Pwd: /oracle/SID/ora<sid>/sapdata/
Any body faced problem like this...
Regards

Hi all,
Thanks for responses.
I found the resolution. The funny thing is while installation system looking for files in UPPER case where as the original CDs contain file names in lower case.
Once I changed to Upper case, Installation progressed.
Regards

Performance issue EP on Sun Solaris

Hi All,
I have a EP NW04 SR1 installation on Sun solaris 5.9 machine , single CPU. When i stop the EP server , the idle time on the server shoots up to 98%. On the r other hand when i run "startsap" ( the server is just starting) , the idle time comes down to 0%.
Are there any parameters to be tuned on the Sun Solaris.
Because even with no users logged on, the idle time is almost 0%.
Pasting a output of the vmstat command.
Regards
PN
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr s0 s6 s7 s8 in sy cs us sy id
0 0 0 6098056 603680 42 974 328 0 0 0 0 0 0 0 0 441 556 374 72 24 3
0 0 0 6098040 597320 36 80 370 0 0 0 0 0 0 0 8 480 2526 582 88 7 4
0 0 0 6098024 596800 77 107 143 0 0 0 0 0 0 0 2 445 1321 528 89 7 3
1 0 0 6098024 594520 69 106 223 0 0 0 0 0 0 0 2 446 856 443 91 8 1
0 0 0 6098024 596280 17 633 100 0 0 0 0 0 0 0 2 442 788 423 84 15 1
4 0 0 6098024 582304 15 314 28 0 0 0 0 1 0 0 2 428 1284 432 79 20 1
1 0 0 6097960 581720 87 104 796 0 0 0 0 0 0 0 14 466 3379 659 86 7 7
0 0 0 6097896 581544 82 125 462 0 0 0 0 0 0 0 16 519 3639 723 78 14 7
0 0 0 6097896 581384 29 87 271 0 0 0 0 1 0 0 2 505 985 404 92 5 2
1 0 0 6097856 581128 33 64 107 4 4 0 0 0 0 0 4 449 1342 340 96 4 0
0 0 0 6097824 573552 16 518 52 8 8 0 0 1 0 0 5 433 674 330 86 14 0
1 0 0 6097824 572656 16 40 8 0 0 0 0 0 0 0 3 414 1762 541 96 4 0
2 0 0 6097752 572336 8 49 72 4 4 0 0 0 0 0 1 437 1176 555 93 7 0
2 0 0 6097376 570176 25 60 215 0 0 0 0 0 0 0 2 473 1337 560 92 8 0
4 0 0 6097368 572080 37 70 163 0 0 0 0 0 0 0 2 457 1219 521 94 6 0
21 0 0 6097368 571896 8 36 64 0 0 0 0 0 0 0 0 426 1734 594 93 6 0
18 0 0 6097368 570608 83 103 64 0 0 0 0 1 0 0 2 433 1327 464 88 11 0
2 0 0 6096936 566680 6 480 48 0 0 0 0 3 0 0 2 428 807 486 86 14 0
1 0 0 6096448 562640 16 49 56 0 0 0 0 0 0 0 2 422 1982 465 98 2 0
Message was edited by: Portal Newbie

Hi ,
I have noticed that if the end users are working on Portal, the performance seems to be fine.
If i log on to as an ADMIN and go to PCD , or try to change a role or attach a role, then the performance goes down and the amount of idle time goes to zero.
Any idea what parameters can be set to fine tune this ?
Regards
PN

Link to downoad the OBIEE software for Sun Solaris sparc 64 bit

Guys,
Help me out to know from where i can get software of OBIIEE(Siebel) for installation on Sun Solaris sparc 64 bit.? Its's urgent
reards
Prashant

Such specific software is not available on OTN, you have to contact an Oracle sales representative.
Werner

BPEL Server installation on JBOSS application Server on SUN SOLARIS

I have a question about Oracle BPEL installation. For our project exists the requirement, to install BPEL Server on SUN SOLARIS, whereby the appropriate Version of Application server JBOSS already exists and it should be used.
The version of the Oracle BPEL server for JBOSS, which we found on the Download side, is made available only with JBOSS (version 3.2.6) in a Package.
During the BPEL server installation this bound JBOSS server version is installed automatically, without giving selection. Is there a BPEL installation for JBOSS on SUN-SOLARIS, which can be installed at the already existing JBOSS server?

Hi There,
Dis you get any good responces to your question ?
Thanks
[email protected]

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Help needed on installation of Oracle 9i EE on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

Sun Solaris 10 installation problem on IBM ThinkPad R31Notebook

Hello,
I have tried to install Sun Solaris 10 on my IBM ThinkPad R31 notebook, but the system has problem at initial stage of loading the installation software from CD. Here is the message I see on the screen when the CD is loaded:
loading stage2 ....
GNU GRUB Version 0.95 (639K lower / 514880K upper memory"
Solaris
Solaris Serial Console ttya
Solaris Serial Console ttyb (for 1x50, v60x and v65x
SunOS Release 5.10 version Generic_118855-33 32-bit
Copyright 1983-2006 Sun Microsystems, Inc All Right reserved
Use is subject to license terms
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
Rebooting
I changed both memory and the hard drive but I still have the same problem. Can anyone please tell me what the problem might be or what remedial step I should take to install Solaris 10 on R31?
Thanks

Did you try install check CD before the installation?
I think that there might be two main reasons:
1. Your computer is not supported
2. Hard drive may need to be formated to FAT32 or UFS

MUT-03010 during installation on SUN solaris

Similar Messages

Maybe you are looking for