Muvo Sport c100 Firmware Prob

About a week ago i bought a c00...
The Seller says it has no standart fm but if you update firmware this option will be open...
Before the firmware update i use gb sd card but after the firmware update i can't use it...
How can i load the old firmware version?
In the site just firmware downloadable ,,5...
Thanx for now...

Lugarek,
I would contact support directly. Here is their contact information by region:
AmericasEuropeAsia
It will accept up to GB SD cards.
Jeremy

Similar Messages

Muvo Sport C100 Serious Problem

My Muvo sport c00 player it`s almost dead...when i turn my player on,i get this message " file system error"...the player has 256 Mb memory...i tried to format the dri've with FAT file system and worked , but i can`t copy any songs on mp3 player, i think the disk dri've is broken...can anyone help me? updating the firmware has no effect ...doeas anyone had this problem woth muvo sport c00 player ? and i bought it 5-6 months ago ( ...if u have a solution ,please reply...thanks

I have the similiar mp3 player. The software goes grazy frequently (shutting down and not turning on anymore), and the sollution have been reinstalling the firmware. But now i changed to vista and the update program does not run even in compatibility mode?When creative is doing a firmware updater with vista support?

1GB sd card for Creative Muvo Sport C100 questi

I want to get a GB sd card for a Creative Muvo Sport C00. I was thinking of getting it from amazon. Can anyone tell me
)the name of ones that will works with the Creative Muvo Sport C00.
2)the best one I should get (or should I just get the cheapest).
Thanks

It sounds like something got corrupted in the memory. I would reformat and transfer the music again. Won't take long ... 256MB with 50-ish tracks at USB2 speeds is quick.
jake

Muvo Sports C100 Froz

I put some songs onto my Muvo Sports C00 recently and when I unplugged it, it just shows the screen when inserted into the computer (The usb cable connected to some music notes). It won't turn off/on when I hold down the play button. What should I do?
P.S. What does the button on the back do?
P.S.S. Would it be a problem if I just put songs on it without putting them into folders?
Thank you in advance.
~Atrain

The button on the back opens up the case ... where the battery and SD card are located ...
Try removing the battery, wait a moment, then reinsert the batteries.
Also you can load tracks onto the SD card from any card reader.
We have two here used extensi'vely (you should see my wife's almost 2-/2 yr old C00 - looks like it has been through a war) and they take all the abuse you can give them, and keep on playing.
FWIW since the player has minimal playback ie normal, shuffle, that's it you are best served to just put all the tracks in the root of either the onboard memory or the SD card.
good luck with it,
jake

MuVo Sport C100 - Neck St

Anyone else having a problem with the neck strap on the Muvo Sport? I just got deli'very of mine today and noticed that if you attach the player to the neck strap it's possible for the player to easily unhook itself from the strap...as I found when it bounced off down the room!! I'm not too fussed as I probably wouldn't have used that strap too much.
To me it seems to be a design fault but has anyone else noticed?

Yeah, I think I see what you mean. I've kind of looped the 'string' around the hook a couple of times and that seems to work really well!
After a few hours playing time I think that this is a pretty good MP3 player, as I'd expect from Creative (my original NOMAD Zen is still going strong!). The only quirk is the software...i.e. getting used to MediaSource after years of PlayCentre....and having to change the naming convention of my ripped files!! But these are minor and I'm pleased I stuck with Creative...again!

Muvo TX FM Firmware Prob

Hi, I just decided to update my firmware, I ran the program but it stalled out halfway, and said that it couldn't continue. Now it won't turn on or install when i plug it into my computer. Any suggestions?

Hey
I managed to fix the problem but its kinda strange.
I couldn't get the firmware to re-install on my computer...but i switched computers...and it worked fine....

MuVo Sport C100 and MMC c

I have a new kingston 52mb MMC card.
My pc sees the card 'out of the box', the Muvo indicates that a card is there and when conected via usb card shows, however attempt to access it (write to it) io error.
PC writes no problem, muvo does not see any music copied via pc, shows 'no music'
specs say card should be ok.
any ideas

Search for C00 and MMC in the past threads as I have seen something before where only certain types (not makes) of MMC card worked. Did you know there were different types? Nor did the others till they had problems!
PB

Firmware wishlist for the MuVo Sport C

I would like to start a thread to discuss the suggestions for firmware update for the MuVo Sport C00. FYI, I am running firmware version .0.0. Please post your comments or ideas to my suggestions, or reply with your own comments.
Before I begin, I'd like to say that I think the C00 is an awesome sports player, but it could definitely be improved. My Fiance has the Rio Cali 256, which is also a good sports player. Right now I think it's a toss up between the Cali and C00, but I think the C00 has the potential to outshine the Cali. (I like the Cali's separate volume controls, but I dislike how it falls out of the armband.)
Here are my suggestions in my order of importance:
[urgent] Fix the stopwatch so that the user can change tracks while the stopwatch is running. You should be able to press "Menu' and toggle between stopwatch and music modes while the stopwatch is running.</LI>
[urgent] Fix shuffle mode so that it truly shuffles playback from internal and external memory. Right now it appears to select songs from internal memory 90% of the time. Also, I don't think the player has ever selected anything over the 200th song on the player for shuffle playback at the root level.</LI>
Provide the ability to select a specific song for playback from the Menu. Right now, you can only select the folder for playback and then navigate to a specific song from there.</LI>
Reorder the Menu icons, and place "Folder", "Stopwatch", "Music" and "Play Mode" next to each other. This would allow for easier and faster navigation while running.</LI>
That's all I can think of now. Does anyone know how to submit these to Creative's dev team so they can consider them for a future firmware update?
Message Edited by sixseven on 05--2005 02:50 AM

Definitely, point one in the list is the most urgent one (making player functions accessible without having to stop the stopwatch). This ridiculous flaw leads to the situation that from day one after buying the device it rests unused in my drawer. I do not agree that there is no marketing for this device. Actually, I bought this thing for 20 Euro after I read in an ad that this was the ideal mp3 player for sports. Maybe for 00m runners this is right (you barely change a music track during the2 seconds). But for any distance above 000m it is just laughable.
I wish there would not have been marketing at the time when I searched for a sports-mp3 player. I wouldn't have fallen into the trap to buy this crap. And that Creative is not able to provide a firmware upgrade which corrects this bug for about .5 years now is enought reason for me to make a BIG detour whenever I see a Creative product on a shelf.
Axel

Any firmware for Muvo Sport c1

I've just got a new Creative muvo sport c00..i used to have creativ rhomba which crashed after displaying some msgs about downloading firmware. Is it necessary to download any firmware for this new muvo or is it ok if i dont? I purchased it in Russia where i'm living now. Thanks for ur help

You don't need to update, but if you want to, there is an update available on the site, under Support> Downloads. The file is called MuVoC00_PCFW_LB__0_0.exe
Cat

Creative sport c100 start

I am having trouble starting my Creative Muvo sport c00 MP3 player. Everytime I go to start the player, it turns on, plays about one second of music and then shuts itself off. I have tried deleting all the music and re-adding it and the batteries are brand new, but it still will not start. Sometimes I can change the song, but it shuts off right after. I got the player as a gift in April of 05 and it hasn't worked since July. any suggestions on what to try next?

Download the firmware from Nomadworld.com downloads and reload it. Make sure to follow the instructions at the download page.

CREATIVE MUVO TX FM firmware version 200

I see new firmware for Creative MuVo TX FM . Update it now for new support with Microsoft? Windows Vista? and more .
Creative MuVo TX FM Firmware .24.02 ,
This download contains an improved version of the firmware found on your Creative MuVo? TX FM. It improves your player's compatibility with Microsoft? Windows Vista?. For more details, read the rest of this web release note.
Added Features or Enhancements:
* Adds FM recording (for players with firmware .23.03).
Fixes:
* Enables your player to detect downloaded audio tracks after your player is formatted using FAT32 (Windows Vista RC and above).
Requirements:
* Windows Vista, Windows? XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition (SE)
* Available USB port (version . or higher)
* Creative MuVo TX FM
* For Windows 98 SE only: Creative Mass Storage Driver .07.00.250 or later, available from the Internet
Notes:
* This firmware only works with Creative MuVo TX FM players. Do not install this firmware for other players.
* You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before installing the firmware.
* To install this firmware:
. Download the MuVoTXFM_PCFW__24_02_a.exe file into your local hard disk.
2. Make sure your player is connected to your computer.
3. Double-click the downloaded file.
4. If you are prompted to reset your player, click OK.
5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
6. When the firmware download dialog box appears, click Start and follow the instructions on the screen.
This new firmware is good , i was update it and i not see errors for my CREATIVE MUVO TX FM .
I have a 52 Mb CREATIVE MUVO TX FM . And i like it .
Thank you Creative Technology Ltd .
Have a nice day .

Just noticed the last line of the firmware instructions:
[*]<FONT color=#3333ff size=5>This firmware removes your player's FM recording feature.</LI>
Please make sure you are aware of this before using this firmware
PB

Problem battery life MuVo Sport C

in creative web site, muvo sport c00 battery life is 8 hrs.but my muvo' s battery life is 3-4 hours..( battery is duracell )my muvo has two harddisk...once itself 256 mb diskthe other one is 52 mb carddisk where is back of the muvoi always listen songs from 52 mb?( carddisk ). is that the low of battery life ?you are listen from 256mb muvos itself disk. the battery life 8 hrsand if you are listen from carddisk 52 mb. the battery life is 4-5 hrs...is it maybe ?

I had the same problem. I played the music loud and used
tunes with high bitrate. 4-5 hours at the most for batteries.
My solution to my problem was to get a plastic AA bsttery
holder from radio shack and small alligator clips and connect it
to the AAA terminals and velcro it to the back of the player.
It don't look pretty but works good. Actually I like the look
because it don't look sissyified but thats my $00.2 worth.
scroffa...

Help: MuVo² 5 GB firmware error and connection proble

Thanks in advance to everybody reading this. I've searched through the forums for two hours and have not found a solution.
When started, my girlfriend's Muvo? 5 GB player only shows "firmware error" and switches to recovery mode. So I tried "Scan Disk", "Clean Up", "Format All" rebooting between each step. Nothing changed, so I downloaded the firmware "Creative MuVo? FM Firmware version .00.02". I could not find the exact firmware for the 5 GB player and read in the forum, that this version should work. When I chose "Reload Firmware" and attached the player via USB after I had been told to do so, my computer recognized the player. However when I tried to run the .exe file the setup told me "Your player is not connected, please connect your player."
I've tried it on four different computers and the same message keeps popping up. I'd be really grateful if anybody could help me out on this one. Thanks in advance.

luis bustamante-
Greetings and welcome.
Pull out both of those cards and see if you can boot.
It is most likely one of them or an externally connected peripheral.
Luck-
-DaddyPaycheck

MUVO TX FM Firmware upgrade prob

I've downloaded MuVoTXFM_PCFW__24_02e_a file and began upgrading my player, when suddenly got an error, now I can't do anything with my MuVo - my PC doesn't see it, it doesn't turn on and I can't upgrade it.
Is there anything I can do with my player, exept for throwing it away?
How can I fix the problem?

I've downloaded MuVoTXFM_PCFW__24_02e_a file and began upgrading my player, when suddenly got an error, now I can't do anything with my MuVo - my PC doesn't see it, it doesn't turn on and I can't upgrade it.
Is there anything I can do with my player, exept for throwing it away?
How can I fix the problem?

Creative MuVo TX FM Firmware Upgrade 1.18.02 - The End For Many Players - Par

This is part 2 of the story since you cannot post such a long message in one posting.
>>Dear >>>>in my first mail I wrote already:>>>>After installing the recovery driver I run the >>firmware update again. It says that it found a >>device in recovery mode and more (pretty quick >>message) and after this it searches for this >>device - and does not find any device connected >>to an USB port.>>>> From this statement you can see that I installed the recovery drivers
>>and put the player in recovery mode. Then the player is seen by your >>update software since it finds the player in recovery mode. But after >>this it cannot transfer the new firmware because suddenly it does not >>see the player anymore on an USB port...>>>>To be honest - if your support team would read the mails a bit more >>carefully we all could save a lot of time... And of course I did >exactly>>as described by you and in the update notes. And this all on two >>different computers with two different OS - XP and Win98 as I said in >my>>first mail already...>>>>Best Regards,>>>>Peter>>>>>>>>At 02:6 .0.05 +000, you wrote:>>>Dear xxxxxx>>>>>>Thank you for replying to us.>>>>>>In response to your email, kindly ensure that your player is used on >>the>>>minimum operating system requirement. When connecting your player >>>directly to the computer, was your player being recognized? I have >>>verified the firmware update.>>>>>>Kindly verify the below steps you have used to update the firmware for>>>>>your player: >>>. Download the MuVoTXFM_PCFW__8_02.exe file into your local hard >>>disk.>>>2. Connect your player to your computer.>>>3. Double-click the firmware upgrade file.>>>4. When prompted to set your player in Recovery mode, disconnect your
>>>player from your computer. Press and hold the Play button while >>>connecting your player to your computer's USB port. Continue to hold >>the>>>Play button for about 0 seconds after connecting your player to your
>>>computer. Release the Play button when the Find New Hardware dialog >box>>>>>>>appears on the computer screen. Did you encounter any issue?>>>5. Follow the instructions on the screen to install recovery drivers >>for>>>your player.>>>6. Double-click the firmware upgrade file and follow the instructions
>>on>>>the screen.>>>>>>Are you still encountering the same issue?>>>>>>Do email back on the status concerning the issue so that I can assist
>>>you further. Thank you. >>>>>>Best Regards>>>>>><name removed>>>>Technical Support>>>Creative Labs Asia>>>>>>To provide feedback on your "Creative Experience" please click on the
>>>following link:>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>========== >>>DISCLAIMER >>>========== >>>This email and any attachments may contain private, confidential and >>>privileged materials for the sole use of Creative's intended recipient>>>>>and is not to be forwarded or copied to others. Any review, copying >or>>>>>>>distribution of this email or any attachments by others is strictly >>>prohibited. If you are not Creative's intended recipient, please >>inform>>>Creative immediately by responding to this email and thereafter >>>permanently delete the original and any copies of this email together
>>>with any attachments. Thank you>>>>>>Original Message Follows:>>>------------------------>>>Thanks for your response. I am a bit confused since I answered many of>>>>>your questions in my last mail already. And I have been working with
>>>computers for more than 30 years and did many upgrades with THIS >player>>>>>>>already. Since other users have exactly the same problem - if you >check>>>>>>>the forum - it must be a problem with the player or your upgrade >>>software. Should I send the player to your company for repair? But in
>>>any case - you should warn the customers using this upgrade or take it>>>>>from your webpage. If you read my old mail - I tried the whole upgrade>>>>>on 2 different OS and 2 different Computers with your latest drivers.>>>>>>Best Regards,>>>>>>Peter>>>>>>>>>At 07:38 0.0.05 +000, you wrote:>>>>Dear xxxxxx>>>>>>>>Thank you for reaching us at Creative Technical Support; we >appreciate>>>>>>>>the opportunity to assist you.>>>>>>>>Based on the information you provided, may I know if are you using >the>>>>>>>>player on Windows XP>>>> or Windows 98? I would like to inform you that the player only >>support>>>>>>>>>>the below operating system:>>>>>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>>>>>You might like to consider the below factors when connecting your >>>player>>>>to the computer's USB port:>>>>>>>>. Make sure you have the latest drivers, especially USB, installed >>for>>>>your motherboard. If you're not sure, check with your motherboard >>>>manufacturer.>>>>>>>>2. Make sure your motherboard has USB v. ports, supplying at least
>>>>500mA to the USB ports. If you're not sure, check with your >>motherboard>>>>>>>>>>manufacturer.>>>>>>>>3. Try unplugging all other USB devices from the system.>>>>>>>>4. If you're using a hub, try connecting the product directly to the
>>>>onboard USB and vice versa.>>>>>>>>5. You might wish to verify the functionality of your product on >>>another>>>>computer.>>>>>>>>Do let me know the result.>>>>>>>>In case if you need any clarification, please do not hesitate to >>>contact>>>>us. Thank you.>>>>>>>>Best Regards>>>>>>>><name removed>>>>>Technical Support>>>>Creative Labs Asia>>>>>>>>To provide feedback on your "Creative Experience" please click on the>>>>>>following link:>>>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>>>>>========== >>>>DISCLAIMER >>>>========== >>>>This email and any attachments may contain private, confidential and
>>>>privileged materials for the sole use of Creative's intended >recipient>>>>>>>>and is not to be forwarded or copied to others. Any review, copying
>>or>>>>>>>>>>distribution of this email or any attachments by others is strictly >>>>prohibited. If you are not Creative's intended recipient, please >>>inform>>>>Creative immediately by responding to this email and thereafter >>>>permanently delete the original and any copies of this email together>>>>>>with any attachments. Thank you>>>>>>>>Original Message Follows:>>>>------------------------>>>>=======================>>>>>>>>Subject: CLA (CTL) - Technical Support Request - (MuVo TX FM)>>>>Name: xxxxxx>>>>E-mail Address: [email][email protected]][email protected][/url]>>>>Country: Thailand>>>>Self Description: Advanced PC User>>>>------------------>>>>Support Inquiry: ID(3) My Creative hardware stopped functioning >>>>correctly >>>>Product: MuVo TX FM>>>>Serial Number: C6PF32477002804Z>>>>Date Of Purchase: /2/2005>>>>>>>>------------------>>>>Operating System: Windows XP>>>>Creative Model Number: MUVO TXFM 52 MB>>>>Computer Brand/Model: >>>>Processor/CPU: >>>>Memory: >>>>BIOS Type/Revision: >>>>System Board/Chipset: >>>>------------------>>>>>>>>Detailed Problem Description:>>>>I tried to update to the latest firmware >>>>MuVoTXFM_PCFW__8_02 since I stay in Thailand >>>>and need the Thai letters. I installed the >>>>recovery driver since the upgrade software >>>>required this and did exactly what is described. >>>>After installing the recovery driver I run the >>>>firmware update again. It says that it found a >>>>device in recovery mode and more (pretty quick >>>>message) and after this it searches for this >>>>device - and does not find any device connected >>>>to an USB port.>>>>>>>>I have tried this many times and even with the OS->>>>Win98. The upgrade software detects the device in >>>>recovery mode but after this nothing more >>>>happens - it does not find it on an USB-Port >>>>anymore. >>>>>>>>=======================
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:4 PM

This is part of the message since you cannot post such a long message in posting.
This should show how lost you might be with your warranty. If you install the Firmware Upgrade .8.02 your player might be useless. There is no way to make it work again. Not really. If you understand what Creative seems not to do. So dear user - buy a new player. If you want to know what the solution is to make your player work again post here. If there are enough postings I will explain it here. Too sad that Creative does not do it. It is their job not mine... But again - I am not talking about a problem what is nice to have it solved. I am talking about a player that does not work anymore. If you do not want to wait for my solution just send your player for repair - it was not your fault that it does not work anymore...
This story with the great support was a test of Creative and will be used in a review. So be not surprised to find it somewhere else.
Here the Creative support story. The first mail is at the bottom. I had to make part and part 2 since you cannot post such a long message here.
To: Creative Labs Asia Customer Support <[email][email protected]][email protected][/url]>Subject: Re: CLA (CTL) - Technical Support Request - (MuVo TX FM) (KMM7755874I6636L0KM)Dear,I know the solution long time already. I just wanted to test the support at Creative. The problem is real and forces owners of your players to buy a new one since their playes get useless after the upgrade. Not only that Creative puts a faulty upgrade on their homepage - their support is good for nothing. But this was a test of the Creative support. I hardly can believe that Creative is not in the position to solve a very simple problem caused by Creative - what has severe consequences for their customers. But this mail story confirms exactly this. So my advice to any customers - stay away from this company and their products - what is the final result of my test. If you want to know the solution for the problem please contact me again - I am glad to help such a poor company :-)))) For free? I am not so sure...since my player was not for free too...Best Regards,PeterPS: The product is still within the "police period" of my dealer. And I did not just buy the product. If you ever read what your system tells you (what I had to enter) - it was long time ago.
At 03:48 3.0.05 +000, you wroteear PeterBased on the information you provided, since you have just bought the product locally, you may like to contact and check with the dealer firstfor their purchase policy period and see if the product is still within their policy period. If they are unable to assist you, do contact us so that we can assist you promptly in your issue. Thank you. Best Regards<name removed>Technical SupportCreative Labs AsiaTo provide feedback on your "Creative Experience" please click on the following link:http://www.**bleep**.com/support/con...asp?r=CLA&d=TS========== DISCLAIMER ========== This email and any attachments may contain private, confidential and privileged materials for the sole use of Creative's intended recipient and is not to be forwarded or copied to others. Any review, copying or distribution of this email or any attachments by others is strictly prohibited. If you are not Creative's intended recipient, please informCreative immediately by responding to this email and thereafter permanently delete the original and any copies of this email together with any attachments. Thank youOriginal Message Follows:------------------------Dear .,I am a bit confused. What does my problem have to do with buying it on an oversea/business trip? This you really have to clarify. And why do you need my contact number/residential address if you have my contact email address already? You want to come to me and bring me a new player?Would be fine :-) But since there are many others with the same problem there must be a better solution.But in any case - I bought it were I li've and not on a business trip - the dealer is just around the corner - but I guess with more than 30 years almost daily IT experience I have a bit more knowledge than him. Igave you the serial number and the date of purchase. I bought it in Thailand where I li've now. Best Regards,PeterAt 09:28 2.0.05 +000, you wrote:>Dear Peter>>Regards to your issue, may I know is the unit purchase locally or during>Oversea/Business trip? If the unit is purchased during oversea/business
>trip, kindly provide me with the information of the place of purchase, >your current location (residential address) and contact number so that I>will be able to provide you with the advice required promptly.>>Do email back on the status concerning the issue so that I can assist >you further. Thank you. >>Best Regards>><name removed>>Technical Support>Creative Labs Asia>>To provide feedback on your "Creative Experience" please click on the >following link:>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>========== >DISCLAIMER >========== >This email and any attachments may contain private, confidential and >privileged materials for the sole use of Creative's intended recipient >and is not to be forwarded or copied to others. Any review, copying or
>distribution of this email or any attachments by others is strictly >prohibited. If you are not Creative's intended recipient, please inform>Creative immediately by responding to this email and thereafter >permanently delete the original and any copies of this email together >with any attachments. Thank you>>Original Message Follows:>------------------------>Dear ,>>I was talking about Win98SE. I guess there is are not many people using
>Win98 anymore.>>The problem is that the player is in recovery mode already. When I plug
>it into the USB port it does not show up as a dri've anymore. But the OS>confirms that I have put in a device into the USB port when I plug it in>pressing the play button. Also when I run the upgrade software it says >that it has found a device in recovery mode but then it does not find it>anymore. But again - neither WinXP nor Win98SE allow me to format the >dri've since it does not show up as dri've at all.>>Sorry for all this. But realize that I and many others have a piece of >scrap as long as we cannot find a solution for this problem. In the >forum people write that they even bought a new player already since this>firmware upgrade made an end to their TX FM.>>Best Regards,>>Peter>>At 03:0 2.0.05 +000, you wrote:>>Dear Peter>>>>Based on the information you provided that you have verified the player>>>>on another computer with Windows 98. I would like to inform you that >the>>player and the updated firmware only support the below operating >system:>>>>Microsoft? Windows? 98SE/2000/Me/XP>>>>I understand that you are also using the player on a Windows XP >>computer. However, you might like to verify your player on another >>computer that meets the above mentioned minimum operating system. Do >let>>me know the result. >>>>If issue persists but when connecting your player directly to the >>computer the player is being recognized, format the player using the >FAT>>file system, and download and install the latest >>driver/firmware/application update available through the below link: >>>>(Note: All contents in the player will be removed when you format your
>>player, please backup the files) >>>>http://www.asia.creative.com/support/downloads/ >>>>. Insert your MuVo TX FM player into the USB port on your PC/Laptop, >>try a different USB port or hub if it is not detected. >>2. Open Windows Explorer. The player will be recognized as a Removable
>>Disk. >>3. Right-click on the player and choose Format. >>4. In the File system drop down menu, select FAT, and then click the >>Start button. Do not select FAT 32, though it is selected as default by>>>>Windows XP. >>>>After the formatting is complete, make sure that you stop your player >>before disconnecting it from your computer. (Please take note that stop>>>>your player before disconnecting it from your computer is a must. >>Otherwise it will cause damage to your player's memory >storage/Harddisk)>>>>>>To stop your player in Windows XP, Windows 2000 or Windows ME Click on
>>the Safely Remove Hardware icon on the Taskbar, click Safely remove USB>>>>mass Storage device, and disconnect your play when you are prompted to
>>do so. >>>>Make sure that the icon below appears on the LCD screen again for at >>least fi've seconds before disconnecting your player.>>>>Do let me know the result. >>>>In case if you need any clarification, please do not hesitate to >contact>>us. Thank you.>>>>Best Regards>>>><name removed>>>Technical Support>>Creative Labs Asia>>>>To provide feedback on your "Creative Experience" please click on the >>following link:>>http://www.**bleep**.com/support/contact/welcome.asp?r=CLA&d=TS>>>>========== >>DISCLAIMER >>========== >>This email and any attachments may contain private, confidential and >>privileged materials for the sole use of Creative's intended recipient
>>and is not to be forwarded or copied to others. Any review, copying or>>>>distribution of this email or any attachments by others is strictly >>prohibited. If you are not Creative's intended recipient, please >inform>>Creative immediately by responding to this email and thereafter >>permanently delete the original and any copies of this email together >>with any attachments. Thank you>>>>Original Message Follows:>>------------------------
Moderator note: Please remove the name of the advisor when posting up e-mails.
Message Edited by Catherina-CL on 0-3-2005 2:43 PM

Muvo Sport c100 Firmware Prob

Similar Messages

Maybe you are looking for