MVP List #99: Feb. 8, 2014, 2014 - Feb. 14, 2014

MVP List #99: Feb. 8, 2014, 2014 - Feb. 14, 2014
The Verizon Community Forums Most Valuable Posting List is where we recognize great work and words happening every day right here on our community. We know the success as a community is based on the continual and lively contributions of our valued members. Each member provides special and unique contributions and this is the place we try to highlight members that have stood out during the previous week.
Thread of the Week:
This week, the thread of week goes to a thread with over 100 views is a post about the 7232 Volume being stuck. Check it out and reply if you have any guidance.
Post of the Week:
Thank you Walt178 for providing this weeks post of the week with over 93 views on the thread of the week listed above. Thanks for your help and attention!
Member of the Week:
TNS_2, thank you for your support in the thread about “Configuring e-mail to Outlook 2013”, you are this weeks member of the week!
Top Kudoed Authors:
Anti-Phish       8
thetick1234       5
Smith6612       5
This week’s MVP’s
This week, the MVP’s for the Verizon Community Forums are TNS_2, dslr595148, and Anti-Phish. Thank you for your continued support of the Verizon peer to peer forums!
ChrisB_VZ

I am honored to be on the list, however I wish it wasn't for the reason it was.
Unmentioned in your post is the outpouring of support for the Funimation channel. This channels cancellation, due to what is quickly turning out to be a less than factual reason of 'low viewership' from Verizon, has mobilized many of your customers. In fact, I'm sure that most of the people in your list this week were kudo'ed for posts in 1 of 2 threads:
Funimation Canceled!
Save Funimation Petition
If we are to look at the pure numbers, at the time of this writing those 2 threads combined for a total of nearly 950 kudos and 3800+ views. Even more telling: 198 of the 200 most kudo'ed posts are people SUPPORTING Funimation Channel and against Verizon's decision to cancel the channel. (http://forums.verizon.com/t5/kudos/leaderboardpage/board-id/FiOS_TV_Entertainment/timerange/one_mont...
IMHO (and no offense to Justin and his very helpful document) either of these 2 would have made a much more appropriate 'Thread of the week'.

Similar Messages

MVP List #95: Jan. 1/6-1/10, 2014

First MVP post of the new year!
The Verizon Community Forums Most Valuable Posting List is where we recognize great work and words happening every day right here on our community. We know the success as a community is based on the continual and lively contributions of our valued members. Each member provides special and unique contributions and this is the place we try to highlight members that have stood out during the previous week.
Thread of the Week:
The thread of the week with over 293 views is about Netflix Steaming on FiOS Quantum. Thank you CL’s for all of your help on this one!
Post of the Week:
This weeks Post of The Week goes to a post about "Nomorobo"... thank you Justin for your help with this post, I am setting this up at home this week
Member of the Week:
Thank you TNS_2 for your contributions to the forums this week. Thanks to your contributions to the forums this week, you are the member of the week!
Top Kudoed Authors:
TOP KUDOED AUTHORS
gs0b
21
walt178
21
Anti-Phish
11
TNS_2
10
This week’s MVP’s
This week, the MVP’s for the forums are gs0b, TNS_2, Anti-Phish, and walt178
Thank you for your continued efforts, don’t forget to drop me a note with any questions or suggestions,
ChrisB_VZ

Thank you! I noticed the MVP symbol next to my name and used my fabled tenacity to find myself on this list. I hope my message will be of help to the possibly one other person who prefers an old TV and doesn't have HD.

MVP List #117 Sept. 13, 2014- Sept. 19, 2014

MVP List #117 Sept. 13, 2014- Sept. 19, 2014
The Verizon Community Forums Most Valuable Posting List is where we recognize great work and words that happen every day right here on our community. We know the success as a community is based on the continual and lively contributions of our highly valued members. Each member provides special and unique contributions to the group. This is the place we will highlight members that have been especially outstanding during the previous week.
Thread of the Week:
This week’s thread of the week is: ROBOCalls
Post of the Week:
Thanks to Kestrel for your post on the thread “faster router offer etc. apple/wep/wpa”
TOP KUDOED AUTHORS: great job guys!
bbrown9: 4
hubrisnxs: 4
jimsnow: 3
sangs: 3
Justin: 3
This week’s MVP:
This week’s MVP is CaptainSTX, thanks for your continued contributions to the forums!
Cheers,
Brittany_VZ

MVP List #117 Sept. 13, 2014- Sept. 19, 2014
The Verizon Community Forums Most Valuable Posting List is where we recognize great work and words that happen every day right here on our community. We know the success as a community is based on the continual and lively contributions of our highly valued members. Each member provides special and unique contributions to the group. This is the place we will highlight members that have been especially outstanding during the previous week.
Thread of the Week:
This week’s thread of the week is: ROBOCalls
Post of the Week:
Thanks to Kestrel for your post on the thread “faster router offer etc. apple/wep/wpa”
TOP KUDOED AUTHORS: great job guys!
bbrown9: 4
hubrisnxs: 4
jimsnow: 3
sangs: 3
Justin: 3
This week’s MVP:
This week’s MVP is CaptainSTX, thanks for your continued contributions to the forums!
Cheers,
Brittany_VZ

MVP List #102: Mar. 8, 2014- Mar. 14, 2014

MVP List #102: Mar. 8, 2014- Mar. 14, 2014
The Verizon Community Forums Most Valuable Posting List is where we recognize great work and words happening every day right here on our community. We know the success as a community is based on the continual and lively contributions of our valued members. Each member provides special and unique contributions and this is the place we try to highlight members that have stood out during the previous week.
I appologize for the lack of a MVP report for last week, we have been swamped with projects at HQ!
Thread of the Week:
I am always impressed by the depth of knowledge of our community memebers, and this week’s thread of the week is no exception! This week, the thread of the week is about Cat5e or Cat6 and Router Differences.Thank you everyone who helped with this thread!
Post of the Week:
This weeks post of the week goes to Anti-Phish for the post on “router channel. leave on auto or pick a channel?”. Thank you for your attention and support!
Member of the Week:
The member of the week goes to gs0b . Thank you for all of your hard work and attention.
Top Kudoed Authors:
macgig
6
RobHunt
6
gs0b
5
This week’s MVP’s
This week, the MVP’s for the Verizon Community Forums are Viafax999, gs0b , and TNS_2, good work!
Big thanks to everyone in the community, keep up the great work helping the Verizon peer to peer forum thrive!
Best, ChrisB_VZ

What is the update number causing this issue?
Sounds very similar to this issue:
http://blogs.vmware.com/workstation/2014/10/workstation-10-issue-recent-microsoft-windows-8-1-update.html
Are you running the most recent version of VMware Workstation 10?
For more support for VMware products, a better place is the VMware forums, as this forum is for Windows 8.x Hyper-V. (
https://communities.vmware.com/community/vmtn/workstation/content?filterID=contentstatus[published]~objecttype~objecttype[thread])

NX-OS ( n7000-s1-dk9.5.1.3.bin ) BASH VULNERABILITY - CVE-2014-6271 and CVE-2014-7169

Hi ,
Nexus 7000 evaluation for CVE-2014-6271 and CVE-2014-7169 , I am referring below link to check for NX OS - n7000-s1-dk9.5.1.3.bin
https://tools.cisco.com/bugsearch/bug/CSCur04856
5.1.3 is not mentioned in the affected list.Need help to know if 5.1 is affected with BASH Vulnerability .
Thanks for help in advance .

The concern with the bash shell is that services MAY be setup to run as
users which use those shells, and therefore be able to have things
injected into those shells. Nothing on NetWare uses bash by default,
because NetWare is not anything like Linux/Unix in its use of shells.
Sure, you can load bash for fun and profit on NetWare, but unless you
explicitly request it the bash.nlm file is never used. On NetWare I do
not think it is even possible to have any normal non-Bash environment
variable somehow be exported/inherited into a bash shell, though I've
never tried.
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Updated to Premiere CC 2014 and AE CC 2014 and now have blue lines/blue imprints of windows and crashes after 5 minutes of use or on start up

iMac - 27 ", late 2012
Processor 3.4 GHz Intel Core i7
Memory 32 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.9.4 (13E28)
After I updated from CS6 to CC 2014, my screen started to display blue lines and/or a blue imprint of a previously closed window, and Premiere CC 2014 and AE CC 2014 began crashing after about five minutes of use. Also, an error message popped up telling me to update my CUDA driver. I took the iMac into Apple and after updating the CUDA driver in store with an Apple associate, the error message went away. They were concerned about the blue lines, and after 3 days of hardware testing, they determined that the screen was not failing, the hardware was in great shape and the lines and crashing must be a software related issue. I took the computer home, uninstalled and reinstalled AE using the appropriate installer, and rebooted. Then I uninstalled and reinstalled Premiere using the Premiere installer and rebooted again. During the second restart a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen. I typed in my password, opened up the Premiere project I'd been working on and immediately, the always dramatic message "A serious issue as occurred..." popped up. I tried opening it again, saved a new recovery copy and started to work on the project. Five minute later it froze up and I had to force quit. This happened two more times, both roughly after five minutes of use....back to square one.
Obviously, this is seriously hurting my workflow. Any advice you could give would be greatly appreciated!

... a blue imprint of the Google Chrome window I had had open before the reboot was imprinted over the welcome/password screen.
The apple guys said this wasn't a hardware error? I don't know software errors to save imprints throughout a restart. If I were to live dangerously and assume anything it would be that you got a failing graphics processor.
Ever tried cloning your boot drive and then doing a complete wipe and re-install of OS and CC?

PP CC 2014 and AE CC 2014 issues an nMacPro

My frustration with the combination of Adobe and the new MacPro grows. I’ve posted in here before and everyone has been helpful, I’m hoping you can help shed some light once more. First I’ll explain the issue then let you know how the system is arranged.
Issue 1: PP CC 2014 and AE CC 2014 seem to be struggling with each other. Renders in PP take an extreme amount of time if AE is open. Once closing AE, PP will increase render speed by at least 4x-6x faster (no exact calculation, it gets a lot faster). Dynamic Link between the two is really poor performance. Basic text titles with keyframed opacity changes in AE Dynamically Linked to PP, take forever to render. This is not heavy lifting or anything crazy effects or 3rd party plugins. Basic text. Again, if I close AE, the render speed increases. This is obviously not a good workflow. The reason our studio switched back to PP three years ago, was the improved workflow of Dynamic Link across Adobe products. This is proven to get worse, at least in the case of the new MacPro and CC 2014.
Issue 2: When editing in PP, often times the program stops playing back anything. You can scrub the time indicator, but no video plays and no audio plays. It hangs. Pressing the space bar or selecting the play key does nothing. The only way to get the program to react is a restart. This is on a timeline with one or two 1920 x 1080 video sources. Not heavy lifting for a program that boasts about playing native 6K footage. This is a more recent development.
With both issues presenting themselves in different projects, it is not isolated rot a single project that may have been corrupted. I have switched Mercury Playback to software only. It does help somewhat, but not nearly enough to call it a workaround for now. The frustrating part is this problem does not exist on 2011 MacBookPro. That is extremely frustrating given the NMB costs 10x what a new MacBookPro would’ve cost.
The setup: New Mac Pro 2.7 Ghz 12-core 64GB RAM Dual D700 Graphics Cards 1TB internal flash drive. OSX 10.9.4. Adobe CC 2014 stored on internal drive. Project is stored and playing from a 1TB (Journaled) Seagate drive connected through the following: Thermaltake dock esata connection to a Sonnet Tempo Sata Pro 6GB Express Card in a Sonet Echo ExpressCard Pro Thunderbolt adapter connect via Thunderbolt to the nMP.
RAM allocated to Adobe products is 52GB with 12GB remaining for “other” system essentials. Scratch disks are set to the project disk so all media and scratch disks stay together. We typically work on 3-4 projects at a time, this setup allows us to keep track of everything.
The above setup and issues are present on the nMP. Compared to a 2011 MBP 2.3 Ghz core i7 8GB RAM AMD Radeon 670M 1024MB graphics card. OSX 10.8.5. The MBP is connected to the drive via the Sonnet esata card and shows no signs of issue 1 or issue 2.
Any thoughts and suggestions on how to help these issues are greatly appreciate. I’ll even take general comments on how to make the system better. Currently the nMP is an expensive paper weight and Adobe is losing my confidence in PP.

This is not an answer but an addition to this problem. I am not trying to hijack but i feel my issues are very similar to what BMercer was having.
I just recently bought the new mac pro with 500gb ssd internal , 6 core, 64gb ram and dual d700s.
I upgrade and purchased CC after i was pretty well convinced that CC was the way to go for this computer as opposed to CS6.
Fo how much i spent on this new computer and new CC subscription i feel this should be functioning better.
I have noticed when i have very basic files on the timeline(1920x1080, no effects) they are still dropping frames or i cannot scrub through them smoothly. As mentioned by BMercer for a machine capable of handling 6k these DSLR files should be pretty simple.
I am trying to do a time lapse for a client and I am having extremely slow load times. This is more difficult but i still believe it should be loading way faster then this.
About 2000 frames of raw DSLR photos simply compiled in AE then opened the sequences in PP and placed them into the timeline. This is taking about 45-60min to render the timeline. I have to do this because scrubbing or trying to play goes nowhere.
This i could accept as well except for when i look at the stats of the computer in the activity monitor and Istats the CPU maintains a 60-70% idle, the GPU stays very low and the max ram combined usage is about 15gb(memory pressure doesn't even show on the graph). So I would assume from this there is nothing i can see that is "holding" the computer back.
I have the exact same MBP as BMercer and i am having far less issues with doing the exact same files rendered from a relatively slow thunderbolt external drive.
Is this a setting issue? Or is this something we can expect to see an update to?
Sorry again for tagging below you but i felt our issue and answers may be similar.

Problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite

I'm currently having problems installing Illustrator CC (2014) and InDesign CC (2014) on OS X Yosemite. Both applications fail with the message "Installation Failed: The download appears corrupted. Please try again after a few minutes.(-60)".
I've tried uninstalling Illustrator CC and InDesign CC and then reinstalling, but still get the same error message. Other applications in Creative Cloud all install without issues.
Has anyone else experienced this issue and resolved it please?

Sorry for the slow response. My Mac wouldn't boot following a failed Yosemite update. I've since reinstalled Yosemite but the exact same problem persists. My Mac is standalone and not on a managed network.
Thank you for the troubleshooting link. I've tried the recommended fix for the -60 error but it doesn't appear to be possible to download the trial version of Illustrator or InDesign for CC editions. They just trigger the Creative Cloud installer and shortly after the -60 error again.
The problem is still specific to Illustrator and InDesign and I've tried uninstalling all Creative Cloud applications and reinstalling. Every reinstalls except InDesign and Illustrator.

Question : Adobe Premiere CC 2014 and AfterEffects CC 2014

I want to i ask a question?
How can the link between Adobe Premiere CC 2014 and AfterEffects CC 2014 ,
Using Dynamic link tool ,
how i can purchase software that supports Dynamic link?
This supports the plan this thing Complete - For New Customers

I don't know if it's the same problem, but when I open my computer and lunch Premiere Pro CC 2014, i have to wait between 5 to 10 minutes to see some media in preview and program monitor. All the files in the project bin are "pending" and I have the super beachball. After the waiting time, everything become perfect and I can close and open Adobe Premiere like I want. Just don't have to shut down the mac. If I shut down the mac, I'll have to wait again...
It's a real problem that I have since I upgraded to Yosemite and CC2014. did a clean reinstall and still have the same problem.
I have a iMac 3,4 GHz Intel Core i7, 32g Ram, SSD.
Let me know if you have the same problem because right now, when I did some search on the web, I found nothing!

Adobe releases CC 2014. Muse releases 2014.1 What?!

This is what I'm talking about Adobe. CC was supposed to be the end of versioning. And now I have not one, not two, but THREE f!@$ing versions of Adobe muse and other applications. Whats the point of having this "cloud" license if you're going to stuff up my hard drive with iteration after iteration of applications? Just update the one damn app!
Come on Adobe. Get your **** together.

I have no idea about the 2014.1 but I do know that 2014 is a NEW program when compared to CC
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins

I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?

I recently installed Mavericks on this iMac and upgraded to Adobe Cloud 2014 now InDesign CC 2014 fails to launch and I get a crash report. Has this happened to anyone else?

It isn't happening to everyone else, but if there was a trend of it happening to a lot of people, that would probably show up in the official InDesign user forum. But there aren't a lot of crash reports there, so it isn't something that's happening to everyone. There are a couple, so you might look at those. But since there is not a huge wave of crash reports, the problem might be more related to a problem on the system rather than a problem with InDesign, like a corrupted font.
The best place to troubleshoot is probably over at the Adobe forum since the users there know InDesign very well.

Why am i updating CC and CC (2014)? is the 2014 a newer version?

Just doing some updates on creative cloud, perhaps I am a bit behind?

http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html
This messages says (at least some) CC 2014 programs use NEW plugins https://forums.adobe.com/thread/1499663
-so do not uninstall the older CC programs if you use plugins in your programs until you are sure you have plugins that work in CC2014
If you are sure you don't need the old CC programs
-http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall
-read reply #3 about the ORDER of uninstalling & installing https://forums.adobe.com/thread/1242671

CVE-2014-6271 and CVE-2014-7169 / Oracle Linux

Hi ,
patches required to resolve the vulnerabilities described in CVE-2014-6271 and CVE-2014-7169 in Oracle linux 5 (x86) is "bash-3.2-33.el5_11.4.x86_64.rpm "
from where i can get this patch, its not availible on support.oracle/patches !!
Thanks,
Thamer

Your Oracle Linux system should be configured to automatically install packages either from the Unbreakable Linux Network or public-yum.oracle.com. You might want to ask your Linux sysadmin for assistance if your servers aren't already configured for updates.
You can also check Chapter 1 and Chapter 2 of the Oracle Linux Administrator's Guide for more details on using ULN or public-yum: Oracle® Linux (it's for OL6 but the concepts are the same for OL5).

MVP List #94: Dec. 23-27th, 2013

MVP List #94: Dec. 23-27th, 2013
Happy almost New Years!
The Verizon Community Forums Most Valuable Posting List is where we recognize great work and words happening every day right here on our community. We know the success as a community is based on the continual and lively contributions of our valued members. Each member provides special and unique contributions and this is the place we try to highlight members that have stood out during the previous week.
Please let us know what you think!
Thread of the Week:
This week, with over 340 views, the thread of the week goes to a thread about removing a channel from a user’s TV line up.
Post of the Week:
The post of the week goes to viafax999 for the thread “Can MI424WR be used as a bridge/repeater?”.
Member of the Week:
Congratulations to gs0b because of your contributions in various threads this week, you are the member of the week.
Keep up the good work!
Top Kudoed Authors:
Justin
9
walt178
9
melissa01
6
mcquillen811
5
armond_in_nj
5
This week’s MVP’s
This week, the MVP’s for the forums are Anti-Phish, Smith6612 , and walt178
Thank you for your continued efforts!
ChrisB_VZ

Patrick,
Thanks my session verify function was causing the problem and I have removed it temporarily from my authentication scheme.
I am using the "check_timeout" function that was developed a number of years ago as part of a "How To" section in the old HTMLdb days. I knew there was an issue with this routine as the newer versions of the browsers handle cookies differently and I was going to redevelop it at some point. Do you know which part of the function causes the issue?
Many Thanks,
Jon
FUNCTION check_timeout
RETURN BOOLEAN
AS
l_session_expire VARCHAR2(256) := NULL;
l_cookie_exists BOOLEAN := TRUE;
BEGIN
IF htmldb_custom_auth.get_user IS NULL THEN
RETURN TRUE;
END IF;
BEGIN
l_session_expire := owa_cookie.get('HTMLDB_IDLE_SESSION').vals(1);
EXCEPTION WHEN NO_DATA_FOUND THEN
l_cookie_exists := FALSE; -- no cookie set, assume first page visit after login
END;
IF l_cookie_exists
AND TO_DATE(l_session_expire,'DD-MON-YYYY HH24:MI:SS') < SYSDATE
THEN
wwv_flow.g_unrecoverable_error := TRUE;
owa_util.redirect_url('f?p='||'500:101'); -- Note hard-coded login application and page ID 500:101
RETURN FALSE;
ELSIF NOT g_cookie_already_sent THEN
owa_util.mime_header('text/html', FALSE);
owa_cookie.send ( NAME => 'HTMLDB_IDLE_SESSION',
VALUE => TO_CHAR(SYSDATE+(c_max_idle_minutes/1440),'DD-MON-YYYY HH24:MI:SS'),
expires => NULL,
path => '/',
domain => NULL );
owa_util.http_header_close;
g_cookie_already_sent := TRUE;
END IF;
RETURN TRUE;
END check_timeout;

MVP List (Most Valuable Posting) List Week #5

MVP List (August 1st through August 7th)
The Verizon Community Forums (Most Valuable Posting)List is where we recognize great work and words happening every day right here on our community. We know the success as a community is based on the continual and lively contributions of our valued members. Each member provides special and unique contributions and this is the place we try to highlight members that have stood out during the previous week.
Thread of the Week:
Great teamwork troubleshooting this Verizon Modem Router issue.
Post of the Week:
Thank you, jtktlw, for detailing such thorugh step-by-step instructions on connecting your Xbox Live with the Actiontek GT704-WGB wireless router.
Most Helpful Member:
This would have to go out to Justin this week. A member wanted help with "Setting up the IMG Guide to just show channels that they actually get" We were reminded at how helpful it is sometimes to point each other back to content/solutions already previously posted. Justin had written a user guide on that very topic previously with "Exploiting TV Favorites."
Most Noteworthy Quote:
"In contrast to those users who claim they aren't being given the speeds they were advertised, FiOS customers in our forums indicate they're actually getting more than they paid for." Great observation, Hubrisnxs!
Top 10 Kudos of the last 7 Days!
Screen Name
# of Kudos
1.
prisaz
29
2.
Hubrisnxs
17
3.
Viafax999
12
4.
Justin
11
5.
lasagna
10
6.
spacedebris
9
7.
Jumpin68ny
8
8.
Keyboards
5
9.
RetiredDBA
5
10.
ACABThomas
4

Just a reminder folks, that this is a thread to celebrate the positive about the Verizon Residential Services Forum and its contributors. Please be courteous to all Verizon users, and if there is a feature you would like to see on any Verizon board, please make the suggestion.

MVP List #99: Feb. 8, 2014, 2014 - Feb. 14, 2014

Similar Messages

Maybe you are looking for