MW600 Audio Problem in Windows 7

Hello,
I am having a problem with this headset, it connects fine to the PC (I am using a Belkin BT Dongle with Broadcomm Chip)
I have installed the Broadcomm stuff all is well it would seem
But on Skype or any other program where I want the Mic and Speakers to work at the same time I get no audio, it's one or the other
Does anyone have any ideas how to fix this before I throw it out of the window (I may not open it first! :smileywink
Thanks

It's hard to place where this problem is located.
Is it working if you use the headset with a phone? Because I believe it works in the same way (uses the same Bluetooth profiles)
 - Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Audio Problem in Windows 7 (VDI)

    HI,
    We are facing Audio Problem in Pooled based virtual desktops.
    Speakers works fine but Input device not showing. We are using windows 7 Proffesional edition and VDI servers runs on Server 2012 R2.
    dilip patel

    Hi Dilip,
    Are you using latest version of RDP version?
    Did you check whether the required option is selected for audio redirection?
    Please see whether you have selected below options correctly.
    Also try to enable policy setting and check,
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection
    Allow audio and video playback redirection
    https://technet.microsoft.com/en-in/library/dd759165.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • 3000N100 Audio problem in Windows 7

    Recently I installed windows 7 in my N100 0689CQA which has AD1986A audio chipset.All can work well with Vista drivers exept Audio.
    In fact after I installed the soundmax audio driver for windows vista,the speaker and the internal mic can work.But the sound has some delay and always has noise before it comes out.
    I think the current audio driver for Windows Vista is not so compatible to windows 7.Angbody has solution on this issue?Maybe the latest driver?
    Thanks a lot.

    Hi Dilip,
    Are you using latest version of RDP version?
    Did you check whether the required option is selected for audio redirection?
    Please see whether you have selected below options correctly.
    Also try to enable policy setting and check,
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Device and Resource Redirection
    Allow audio and video playback redirection
    https://technet.microsoft.com/en-in/library/dd759165.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Audio problem in Windows 8

    Hello everyone,
    I have a Windows 8 laptop and suddently my audio doesn't work. I have already clicked to the option that the system suggests and it fixes the problem by itself. However this wasn't successful. I found out that there is no installed audio device. How is that possible? I mean, I didn't do any changes myself.  In addition, one more problem seems to appear. I can not update Windows from 8.0 to 8.1. Do these two problems have to do something with each other? 
    Thank you in advance.

    Hi Areta,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Notebook and issues with sound drivers. I would be happy to assist if needed as there are many models of HP Notebooks, I would need the model number. How Do I Find My Model Number or Product Number?
    Here is a link to The HP Support Assistant. The HP Support Assistant will help with the updating drivers if needed. After an update sometimes you need to check to make sure all the software and drivers have been updated. Restart the computer after the update has been completed. Here is a link to troubleshooting sound if you need it.
    Please let me know.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Audio problems after windows 8.1 update

    My audio volume has gone to barely audible after I went to 8.1 however only for certain things.
    When I try to listen to a vidio clip on Yahoo or other news feeds I can barely hear anything and when I play
    free cell or solitare and make a wrong move the audio warning is just barley audible.
    However when I listen to a Facebook audio it comes booming in as before the upgrade. and when Malware bites
    does a update the signal is very loud
    I re downloaded the realtec audio driver for 8.1 and have gone through all the settings I know about
    and nothing works to help.
    I would go back to the old Windows 8 ( I don't think 8.1 is any better anyway ) but I will loose my
    Microsoft office download and some game downloads I have installed and have to re buy them.
    Any Help ?
    Aloha from Kauai Leon

    rckuehl wrote:
    Model is Satellite E55-A5114, part number is PSKPJU-01K023.
    Not sure when my computer got updated to 8.1, but I started losing audio at some sites around August 2014.
    Bob
    Hi rckuehl.  It may have been caused by installing the Microsoft August 2014 update for Windows 8.1 - KB2975719.
    Try uninstalling the KB2975719 to see if the sound problems go away.  If not, try installing newer Realtek HD Audio drivers as your E55-A5114 laptop uses Realtek audio drivers; original driver for that model was 6.0.1.7026.  The latest Realtek HD Audio driver from Toshiba is version 6.0.1.7329 which was posted 9-25-2014.

  • Lenovo y510p audio problem on Windows 10 x64

    Hi i am using lenovo y510p and i having some problem.After installing Windows 10 x64 I can`t use the 5.1 speakers connected via optics. At sound check box gives "Failed to play test sound"/
    To solve these problem I tried:
    1. Reinstalt drivers Realtek (tried as a version from official Lenovo suport and the latest version from Realtek);
    2.Plug and unplug optics (Realtek Didgital Output) in "Sound";
    3.Restart the Windows Audio  service.4. Reinstalt chipset and audio drivers.
    Now the external speakers working in stereo .

    The drivers listed for under Y510p was not the lastest for our audio hardware, hence why I gave you a link to (what I think) is the latest version. Those should have no problem working under Win 10 (and maybe Win 8.1).
    Y510p has a "weak" audio chipset in the sense that it isn't handled well by the drivers providided on Realtek's homepage.

  • Audio problems with windows 7

    I've been using windows 7 (through bootcamp), but there's no audio. I've tried to check and fix the settings but couldn't.
    How can I fix it?
    Thanks!

    This is what I found... works great for Windows 7 MacBook Pro Late 2009
    http://www.technews.biz/gadgets/apple/macbook/Vista_R208.exe
    Or at this page: http://answers.microsoft.com/en-us/windows/forum/windows_7-sound/macbook-prowind ows-7-sound-driver-issues/d0a09e7d-3549-468b-9e5c-2a711a0a7d9f?page=1&tm=1316951 470340#footer
    Works amazingly!

  • Audio Problems - running Windows XP under partition - MacBook4,1

    I have a MacBook, model number above. It was properly partitioned and the sound worked fine in Windows until yesterday. Now, no sound device of ANY sort is being recognized. It's almost like Windows XP doesn't realize there is a driver in place. How do I resolve this? Do I have to reinstall XP? I'm not a techie - how do I even do that??? Thanks for your patient advice.

    I have a MacBook, model number above. It was properly partitioned and the sound worked fine in Windows until yesterday. Now, no sound device of ANY sort is being recognized. It's almost like Windows XP doesn't realize there is a driver in place. How do I resolve this? Do I have to reinstall XP? I'm not a techie - how do I even do that??? Thanks for your patient advice.

  • FCPX,  problems in window/record audio/monitor/choose 'airplay'.

    I had to record a voice over (audio by dropmenu windows/record) there are options for mic and monitor. By monitor one is 'airplay'.
    I wanted to find out the purpose of this.You need a password. I tried several times (my standaard and only password for fcpX, iTunes, apple TV etc.) but that will not be accepted as the message say.
    I wanted to quit at least but I had to try again several times to quit because the demand for a password comes back and the options in "record" to switch there does not appear.
    I had to try several times before the options suddenly came back (the message disapeared too) to end this exercise.
    Three questions:
    1. what does the function airplay mean?
    2. what to do with the password-problem?
    3. could this all be a bug?
    Thanks!
    bruce

    Airplay is the functionality that lets your mac or ios device play audio (and/or video) to an AppleTV, like it were another audio device. If you have an AppleTV, or Airport Express, you can select that as an audio output device, much like you can select your headphones or other audio output.
    This is not a good option for monitoring audio in an application such as FCP X, as there will inevitably be a lag due to buffering, at least.

  • Sigmatel 9205 - Problems with audio codec in Windows XP

    Does anyone have a working solution to using IDT Sigmatel STAC 9205 Audio Codec in Windows XP.  I have Dell Lat. D531, D630, D830 and XPS M1330 (the D531 and XPS came with VISTA pre-installed - we don't support, so I formatted and installed Windows XP).  The problem is that I cannot, for the life of me, get the Sigmatel driver to install.  Even on the machines that came with Windows XP (we routinely format the Dell OEM OS and replace with our volume license XP OS) the driver won't install.  I even repaired the OS installation with the OEM (Dell) version and still the driver will. not. install.....  This is a very recent problem and I have at least 15 laptops that I can't get the integrated sound card to work (when I go to install the driver the message is basically the component you are trying to install is not present on this system).  I have been 'working' with Dell Tech Support (Gold and otherwise) to no avail.  One tech sent a replacement hard drive imaged with a working driver -- however, she sent a VISTA imaged hard drive...I explained that we don't support VISTA prior to her sending the drive.  One tech is having the motherboard replaced (today).  I'll see how that goes.  This driver is the kiss of death unless dell with supply a pc card as a replacement, I have tried everything I know to do and Dell Tech support knows to do.  ANY HELP WOULD BE GREATLY APPRECIATED

    Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
    Vostro 1500 XP downloads
    However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
    a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
    b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
    c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
    Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
    Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
    A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
    Jim

  • Audio problem with T61 running windows 7

    hello,
    After installing windows 7 Enterprise on my T61, I have no sound.
    Driver seems to be installed correctly (Device manager), speakers taskbar icon looks & functioning OK, but i can't hear nothing.
    I've installed the suggested Vista driver from Lenovo web site, but the problem remains...
    I must mention that there was no problem while using Windows 7 RC, the problem started after installing a clean copy of Win 7 pro.
    Any suggestions?
    Thanks in advance,
    Eyal.

    I've installed win7 over a dozen times on T61 models and never had a problem. Perhaps if you can provide more information, did you reformat your drive before install, or install overtop an existing windows version? If it helps, all my installations are on a freshly formatted partition. Windows installs working drivers on everything except the ricoh card reader, for that you just need to manually install the vista drivers from device manager and it will work. I then run system update and it installs newer drivers for some of the hardware, but like I said, never had an audio problem.
    ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

  • Sb x-fi xtreme audio console launcher problems on windows 7 32bit

    Asb x-fi xtreme audio console launcher problems on windows 7 32bit'sI recently installed windows 7, because I was tired from Windows XP, but unfortunately after installing all the drivers for my hardware I realized my 5. isn't working quite as expected.
    My first problem was, that the Crystalizer didn't work, after installing tons of different software, found on creative labs forums the crystalizer started working.
    Then I realized that the CMSS-3D wasn't (and still isn't working). How do I fix that ? I've tried numerous ways but nothing happens, while in windows XP everything worked fine after installing the drivers.
    I also miss some configuration options in the Creative Console Launcher, namely the check boxes:
    ?"Automatically enable headphone settings" and "Automatically mute speakers".
    Where the hell did they go?! I use them, I need them. How do I get them back? Is XP somehow privileged than 7? Isn't it supposed to be the opposite?
    I also can't change the speaker configuration - it's stays 5. whatever I do, and the drop-down menu with the choices is missing?! Auto-detect option doesn't work, and if it did worked - I don't need it.

    To : woj2322, You may need to download and install the Dell Notebook System Software version 5.0.5. This installs patch fixes to solve the PCI ExpressCard device not work correctly. This is only for the DELL Inspiron 520 Notebook (See Below). Microsoft patch fix info below also. Also, I see there's other people that are having the same issue, maybe you to need to download and install the patch fix for your notebook's on dell's website. It's called "Dell Notebook System Software" under "System Utilities"
    DELL Inspiron 520 Notebook Release Title:System Utilities: Dell Notebook System Software, Utility, Windows Vista 32-bit, Multi Language, Multi System, v.5.0.5, A00 Description:Notebook System Software is a utility that provides critical updates and patches for your operating system.More info on the download file :
    http://support.dell.com/support/down...=7&fileid=9736 Direct Download :
    http://ftp.us.dell.com/utility/R43625.EXE Part of what it fixes from micrsoft.When you connect a PCI ExpressCard device to a portable Windows Vista-based computer, the device may not work correctlyhttp://support.microsoft.com/ kbid=929550

  • Audio problems with SBLive! 5.1 and Windows XP Pro,

    I just reinstalled Windows XP Pro from a slipstreamed CD with SP2 on it. (That means I can't just remove SP2 without reinstalling Windows.) Now, when I play a game the audio skips and stutters for the first 5-0 min of gameplay. The skipping and stuttering goes away eventually, but its REALLY annoying. This is the only hardware problem I've had with SP2, and I would like to know if there is a patch in the planning to fix all the SP2 Sound Blaster problems, or do we all have to find our own work around for these things.
    If anyone has a solution for this please let me know. I've already installed the UniDriver thing, and it still acts up. I've tried removing and reinstalling everything, cleaning out my registry, and rebooting. Defragging my HD did not work either. Nothing seems to work.
    CPU= AMD Athlon XP 2600+
    RAM=704Mb
    Video=GeForce 4 MX440 AGP 28DDR
    Please help soon.

    I think I may have solved my problem. I recently installed Full Spectrum Warrior. I installed it to a different dri've than all of my other games. Lo and behold, no audio problems. After some further investigation, I believe that the audio problem lies in an old hard disk dri've that is in the beginning stages of failure. After I actually thought about it, my load times from this hard disk have been taking forever, but Full Spectrum Warrior loads very quickly. The dri've is going to die! But I guess it's ok, the dri've is almost 0 years old, and this is the 3rd computer its been in.
    Thanks for your help,
    Josh

  • Hp pro x2 410 windows 10 driver audio problem

    Hello, I checked from this page http://www8.hp.com/us/en/ads/windows10/upgrade.html if my model h6q30ea was compatible with windows 10 and I got a positive response:I followed all the steps in the following pageshttp://www8.hp.com/us/en/ads/windows10/compatible_concerns_s1.htmlhttp://www8.hp.com/us/en/ads/windows10/compatible_concerns_s2.htmlhttp://support.hp.com/us-en/document/c04734799?openCLC=trueI installed the latest audio driver via windows update and via hp support assistent, but still the audio doesn't workDid you seriously tested this device??? thanks

    Hi nick02306,
    Your Pro x2 410 G1 is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HP Pavilion dv7-1250en Audio Driver problem for Windows XP SP3 x86

    Hi. I have installed Windows XP SP3 in HP Pavilion dv7-1250en and has found all drivers except Audio Driver for Windows XP SP3 32-bit.
    Everest found 2 Audio device
    1) IDT 92HD71B7 @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
    2) nVIDIA HDMI @ Intel 82801IB ICH9 - High Definition Audio Controller (A-3) PCI
    Please help.
    Thanks in advance.

    Try sp41693
    IDT High-Definition Audio CODEC Driver,
    sp41693, vista driver, reported work in XP here
    Pavilion DV2922TX, XP-SP3 32bit, Intel T5750 2.0Ghz, Nvidia Geforce 8400M GS with 128MB, 4GB 667 DDR2, 250GB HDD

Maybe you are looking for

  • Sql Query (updateable Report) returning ORA-06502: PL/SQL: numeric or value

    Hi I have a Sql Query Report Region as defined below. On the report attributes I am not using any "Row Selector". In a After submit process I try to print out the results of the value I have entered in as a value in updatable report and i get the err

  • Firefox will not load my swf file. Runs perfectly in all other browsers. Help!

    I've developed a website (www.fit-mamas.com.au) whereby you click on the black & white image and get a pop-up window running a video. The video is an .flv file running via a .swf file loaded from an html file. The .swf file was produced using Flash C

  • Incomplete Purchase Orders

    Hi All I have a requirement to create a report to list all the incomplete Purcahse orders.is there any standard extractor that captures incomplete pos.I checked the 2LIS_02_ITM , HDR extractor and couldnt find the extractor. Should i go for a generic

  • Metadata entry for frame sequences.

    Hi There,                  I'm running the trial of Prelude ahead of getting the full CC to test a pipeline. A couple of issues have come up dealing with Cinema DNG (I'm using some samples from the Digital Bolex, the Ikonoskop and the BMCC). Firstly,

  • PO with accnt assignment as COSTCENTRE

    Hi experts, if account assignment category is costcentre what is the procedure of releasing the purchase order ? Is it different from the standard releasing procedure ? will reward for answers Thanks & regards