My 3G sim is not working even after resetting and updating apn
I am disappointed with ios6 it has caused problems for my ipad connectivity .even after resetting apn ,network setting it is not connecting and showing 3G icon rather it shows E and speed is dead slow pls provide help at my email
The same story. No 3G after updating to 6.1. Told my daughter temporarily not to do an update on her iPad with 6.01. We've exchanged SIMs. I inserted her SIM in my iPad - 3G appeared immediately. And my SIM in her iPad with ios 6.01 also WORKS FINE. We use the same provider - Megafon Moscow. After attempting to revert SIMs to original configuration, 3G disappeared on my iPad again. Don't know what's going on with SIM during the update to 6.1
Similar Messages
-
Ipod touch screen not working even after resetting to factory specs
ipod touch screen not working even after resetting to factory spec. lock symbol appears at top
That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.
-
All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel! -
MacBook Keys not working even after KeyBoard Firmware update
My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
Can someone plz tell me what to do now? Will reinstalling help?
Thanks in advance.The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?
-
Hi, I have uninstalled and re-installed Java. When I look at Add-ons, it shows Java Platform SE7 U17 10.17.2.2 and Java deployment Toolkit 7.0.17… 10.17.2.2 enabled. But it is not working – and I do not see the Firefox plugin to allow occasional use of Java.
One useful thread which discusses several difficulties in detail is
https://support.mozilla.org/en-US/questions/944956?esab=a&as=aaq
I tried to follow scrumpyjoe’s advice in this thread:
“This fixed it for me (32 bit windows) after installing Version 7 Update 10, but not seeing the plugin:
1) start regedit
2) navigate to HKEY_LOCAL_MACHINE\SOFTWARE\MozillaPlugins
3) right click, add New Key, name: @java.com/JavaPlugin,version=10.xx.xx
4) click on it, then right click and add new string value, name: path
5) right click, Modify, change value data to: C:\Program Files\Java\jre7\bin\plugin2\npjp2.dll [check if this is the right dll for your setup]
6) exit regedit
7) start FF”
- but (unless I have made a mistake) it has not resolved my problem.
What can I try next, please ?
Background:
Asus NX90jq
Intel core I7
700GB free disk space
16384Mbytes memory
O/S: Windows 7 Ultimate, 64-bit
UPDATE 2apr13
I have now unistalled and re-installed Firefox 20.0. restored preferences etc. using MozBackup, and Java Platform and Java Toolkit10.17.2.2. both show as working Add-ons - BUT STILL NO JAVA AND STILL NO RED ICON IN TOOLBAR. What is going on, please ?I don't understand any of these replies. How do I get Java to run for Pogo.com? I had no problems a week ago. I do not have the red icon. I am not a programer so keep it simple. I am a 59 year old speech therapist.
[email protected] HELLLLLLP -
I am using 3.6.12 version of firefox with windows OS. Recently, lot of addons not working and not showing in task bar like IE tab, RC Search, Answers, Better Privacy, AdBlock plus, etc. I have some 15-20 addons installed of which only 5-6 addons are working .Please help
Update to 3.6.17 in the first instance by clicking '''Help '''| '''Check For Updates'''.
The main reason for this is because there was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
See: http://blogs.comodo.com/category/it-security/data-security/
It's not a good idea to install an ActiveX control in Firefox because you expose your machine to exploits which target that Microsoft technology. If you need to use Internet Explorer, then do that rather installing the IE Tab.
You may find your other add-ons start working properly after you update Firefox, so do that first. -
My recovery key is not working even after reseting it. How can i solve it
I signed to my account but lost other device, so generate new key. This new generated key is still not working. Anny sugestion please?
Do you get an error when you try to set up Sync or is Sync just isn't working?
Try to remove the Weave folder in the Firefox profile folder and delete the prefs.js file to reset all prefs and maybe also delete the compatibility.ini file to reinitialize the profile.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved -
HT3964 USB port not working even after resetting the SMC and PRAM, what can I do now?
Hi All,
I've got the "USB port draining too much energy" error message a couple of weeks ago and since then I've tried many times to reset the PRAM and SMC but still, one of my USB port is not working.
Could anyone please tell what I can do next ??
Thanks a lotIf you live near an apple store make an appointment. They will perform a DFU restore using known good equipment.
If that doesn't work you probably have liquid damage. -
please help me out .. my camera flash was not working. jus bought iphone 5 in singapore and jus boarded ship. so i dont have mobile signal and call to apple customer care. so plz do help. i already reset to factory setting, but still same .
You did a reset? Or a restore?
-
11:22 (7 minutes ago)
to AppleSupport
Dear Sir/Madam Since the wifi is not coming ON how can I open this diagnostic on the iphone 4S am using and having problem with wifi behaving in erratic manner.
Am a professional engineer for projects and am 68 yrs old. At one time was looking after a production line manufacturing I C's in semiconductors manufacturing company of the US.
Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
Wife prefers working on ipad2 or ipad mini while traveling and has iphone 4. Am using iphone4S with laptop and Dell computer, No apple product is more than two years old.
Am having the problem in using wifi on the 4S after it was upgraded to the latest ios as per the recommendation by your software of my iphone 4S
The wifi card hangs up at it's own will and even a visit to your authorized service center in Delhi has not able to help me although they have reverted the ios back to the
one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is not able to some times take the load while working which could indicate the wifi card is getting heated up.
My daughter who is Masters in 3D Animation is an ardent fan of apple products working at present in Canada was also gifted by me a 4S about 4 months back. My daughter-in-law is using iphone4 and an ipad for her professional works along with a Dell PC in the US. While my son is a fan of samsung products and does not like an apple product.
So in a family we have 7 apple products except MAC laptop/PC.
But the fact is, this problem with 4S has really shaken me up and now it seems your products are deteriorating in quality while demanding the best pricing structures.
Since this is purely the device and the software of apple problem you may please replace this set with new one as neither have any time to push you/ request you after your service centre
in Delhi told me yesterday this cannot be repaired.
The serial No of my set is DN*****TC0 and was bought from an authorized dealer and so were the other products from the same dealer in Delhi. This set is still in showroom condition and
was never used without a protective cover.
Thanks
Ashok Dhingra
D E E Hons B E Tech MBA
Vasant Kunj Delhi
<Personal Information Edited by Host>11:22 (7 minutes ago)
to AppleSupport
Dear Sir/Madam Since the wifi is not coming ON how can I open this diagnostic on the iphone 4S am using and having problem with wifi behaving in erratic manner.
Am a professional engineer for projects and am 68 yrs old. At one time was looking after a production line manufacturing I C's in semiconductors manufacturing company of the US.
Have four apple products, one hp laptop and one DELL professional computer at home is used by only two members me and my wife.
Wife prefers working on ipad2 or ipad mini while traveling and has iphone 4. Am using iphone4S with laptop and Dell computer, No apple product is more than two years old.
Am having the problem in using wifi on the 4S after it was upgraded to the latest ios as per the recommendation by your software of my iphone 4S
The wifi card hangs up at it's own will and even a visit to your authorized service center in Delhi has not able to help me although they have reverted the ios back to the
one supplied with the set. Am a user and not a computer expert but it looks like the wifi card is not able to some times take the load while working which could indicate the wifi card is getting heated up.
My daughter who is Masters in 3D Animation is an ardent fan of apple products working at present in Canada was also gifted by me a 4S about 4 months back. My daughter-in-law is using iphone4 and an ipad for her professional works along with a Dell PC in the US. While my son is a fan of samsung products and does not like an apple product.
So in a family we have 7 apple products except MAC laptop/PC.
But the fact is, this problem with 4S has really shaken me up and now it seems your products are deteriorating in quality while demanding the best pricing structures.
Since this is purely the device and the software of apple problem you may please replace this set with new one as neither have any time to push you/ request you after your service centre
in Delhi told me yesterday this cannot be repaired.
The serial No of my set is DN*****TC0 and was bought from an authorized dealer and so were the other products from the same dealer in Delhi. This set is still in showroom condition and
was never used without a protective cover.
Thanks
Ashok Dhingra
D E E Hons B E Tech MBA
Vasant Kunj Delhi
<Personal Information Edited by Host> -
i have just got the B110a and have a persistent problem with the colour cartridges not aligning. Despite numerous head cleanings and putting brand new cartridges in i still don't get any colour...........so far to try and resolve the problem i have done the following
With the 'set-up' colour inks
switched off and unplugged printer and laptop, powered everything up and tried again
done numerous printhead cleans
tried numerous alignments
With brand new set of colour cartridges
switched off and unplugged printer and laptop, powered everything up and tried again
done numerous printhead cleans
tried numerous alignments
I'm at a loss, and pretty fed up wish my trusty old Dell printer worked with the new laptop.......A new phone has a warranty. So take it to an Apple store. If they can't fix it, they will replace the phone. Or do you mean: it stopped working after 9 days, but then you waited until the warranty ran out and then ask us?
-
IPhone 5, flash is not working, even after resetting
Nothing is working. I'm seeing that this has been a reoccuring issue. Will it be fixed with an update? Or will I need a whole new phone. I'm really upset about this being i've had the phone only one day.
lindsboro wrote:
i've had the phone only one day.
Then take it back and exchange it. -
I cloud backup not working even after reset my Apple ID and didn't try to back up photos
DId everything - reset my Apple ID, excluded photos from backup but backup could not be completed still
This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail. To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, tap your device under Backups, then tap Delete Backup. Then go back and turn iCloud Backup back on and try backing up again.
If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup. -
Updated to ios6 lost wifi still not working even after resetting networks?
I've tried resetting the networks and changing the HTTP proxy to auto but no iphone users in my office have wifi connectivity after updating.
My suggestion is to see if Verizon will let you treat the modem as a simple modem and attach your own router to it.
I've found these Westells a pain to setup, and it took me once 2 hours to get through to a Mac specialist on Verizon's end to finally get the right setup on a customer's machine. I don't know that customer's number anymore unfortunately since this was a couple years ago.
Message was edited by: a brody -
help guys
Does the keyboard backlighting if you reinstall the original RAM?
Perhaps you inadvertently disconnected a cable when you installed the new RAM. An appointment at an Apple store genius bar may be a good option.
Ciao.
Maybe you are looking for
-
Making apps open in full screen by default WITHOUT resume enabled.
Hi guys, I love using apps in full screen on Lion and would like to have all apps capable of it open in full screen by default. Unfortunately I've found the only way to do this is to have resume enabled which I really don't like as I find it annoyin
-
Tax is asked on octroi in MIRO
In MIRO, while posting an invoice for items having Octroi, we chose Goods/Items + Planned Delivery. Now Octroi comes as a separate line item but asks for a tax. Is it mandatory to have tax on it even when it is being added to stock account at GR. Cus
-
AVI files appear black on the timeline, no video
I have a series of AVI files that play fine in Windows Media and VLC media player. When I drop them on the timeline (Adobe Premiere Pro CS6, version 6.0.5), each clip shows up as black – with the correct length, but no video. Can you assist?
-
Hi, I am having one ztable. In which some wrong entries are coming. These wrong entries are the messages. When checked by where used list, this table is getting updated by 8 different programs. Now I need to find out from which program and what condi
-
I am a newb at this program and i want to know how to set the beginning scene. when i make "scene 2" and ctrl+enter, it starts with scene 2 instead of scene 1. Scene 1 is the index (home) of the site I'm making. I couldn't find anything about this in