My 4th gen nano has locked up and the click wheel doesn't function, is it dead?
Hi my 4th gen nano stopped working, the screens ok with no error messages but the click wheel no longer functions other than reseting. I've set it back to default ok but still no good as it's stuck on the language page. Is it dead??
Pete.
Hi jim,
If you are having issues resetting your iPod Nano, you may find the following article helpful (it should be listed under iPods with click wheels):
Apple Support: How to reset iPod
http://support.apple.com/kb/ht1320
Regards,
- Brenden
Similar Messages
-
My 4th gen nano stays locked so i can't do anything, any reccomendations?
As the title says, my 4th gen nano stays locked no matter what i do. When i press a button, it doesn't do anything. the screen just turns black, any reccomendations?
will restore help??
Yes it should.
B-rock -
is there a difference between the LG EnV3 and the LG EnV3 VX9200 is this the same phone. the reason I ask is because one says it has internet access and the other one doesn't
It the same phone but you don't have to have data on it if you don't want since they are older phones. We had these phones without data as I didn't think they would be good for surfing the net compared to a smart phone. Mary
-
The display on my 6th Generation Nano has flipped sideways, and I can't figure out how to get it to flip back.
Place your fingers onto the screen and gently (but firmly!) drag the screen around to the upright position.
Hope this helps. -
My 4th gen nano keeps getting stuck on the restart screen
My 4th gen nan keeps getting stuck on the restart screen, the balnk one with the apple. Any ideas?
Reset it (hold down menu and center button) or Reset it in itunes. Make sure software is up to date!
-
There's been a delay or lack of response for a while now, but the ribbon connecting it to the logic board is fully into the clip, and there's no clicking noise when I try to scroll or press any of the buttons. I've replaced the screen before, so I was wondering whether I could replace the click wheel, and how - there's a lot less on the internet about how to do that. I'm really trying not to let my iPod die of old age, so any help would be great.
You will have to replace the front panel and rear panel.
http://www.ifixit.com/Wiki/iPod_Nano_3rd_Generation_Troubleshooting -
Hello everyone I brought a second hand ipod touch 4th gen and it all worked fab except it wouldn't let me put any new apps on it so my friend suggested I restore it which I did but while it was restoring the battery died. Now it doesn't seem to be charging and I have left it for ages through the laptop and tried it through a geniune apple plug in charger but its not working. When you plug in the cable to the laptop or plug the little grey apple comes up on the screen but only stays on for about 5 maybe 6 seconds. Does anyone have any suggestions? I have tried all the trouble shooting suggestions on apple but none of its worked, Shall we just bin it and learn from our mistakes.
Thank you to anyone who can helpTry:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
also
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Need a help to get rid of this error sim card is working randomly
Is there an error message appearing when this happens? Are you in the same area or different areas when this happens?
In the meantime, I would try to take the SIM card out and then put it back in. -
I was walking to my garage when my iPhone slipped out of my hand and fell on the floor. I looked at it and saw strange almost-transparent lines on my lock screen. I tried to unlock my phone, but it wouldn’t let me do anything. It was almost as the touch screen wasn’t working. I turned it off and plugged in my phone to the charger and it started up automatically, but it still looked the same and wouldn’t work. I think that my iPhone 5 might be broken? Please help!
Make an appointment at an Apple store and have then assess it
-
help
Place the iPod in recovery mode using one of these programs and then restore via iTunes:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single ClickFor MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too -
the display is sideways when plugged into my docking station. Can the display be rotated?
My coworkers 4th Gen Nano arrived this morning and the first thing we did was compare the connectors to my 2nd and 3rd Gen Nanos. Unfortunately it looks like neither of the prior Lanyard headphones will work with the 4th Gen and so far there is no sign that Apple intends to resurrect the concept. I know that I won't be buying a 4th Gen until they do. To make matters worse I believe that Apple has a patent on the concept so no third party will be able to step up and fill in the gap.
Message was edited by: Eric Daniels -
I dropped my Ipod and now the click wheel is not working anymore
Hey! I hope you can help me! I dropped my Ipod today, and now the Click wheel doesn't work anymore! The IPod broke open, but I put it together again! When I came home I connected it with the computer to see if "its" alive. And it connected and updated and everything was okay, instead of the Click wheel control! When it dropped there was "Hold" and now I can't deactivate "Hold". So I think, maybe the click wheel doesn't work because "Hold" was activated the moment the ipod dropped! BUt I don't know! Maybe something inside the ipod a soldering joint got torn apart, or something, I don't know! I just know the click wheel doesn't work, anything else seems to be okay! Can anyone help me???
hey and whops about dropping your ipod...
heres what i think but im not an ipod know it all so what i say might not help but any way...
And it connected and updated and everything was okay, instead of the Click wheel control!
well this sound okay so it probly isnt anything to do with the hard drive if it is updating ect...
I think it would have to do with the fact that the hold lock was on... have you tried jigling the hold switch back and forward a bit? that often helps...other wise i think you should take it to an apple store and see what they can do.
Hope it fixes -
Ipod classic, and its click wheel
well, i used to have a 30gb video and the click wheel scrolled easily and didnt pause, now i have a 80gb classic, and when i go to scroll straight away it doesnt start to scroll, until about a second later. Is this common, or do i need to exchange and replace it because it is faulty?
thanksIndeed that works, but it also allows for the iPod to catch up so compensates for the menu read that it seems to be doing. Not ideal, but alas it works.
For general responsiveness I've found that pressing ever so slightly instead of moving your thumb works well. So, you're not pushing hard enough to click the wheel but you are applying pressure.
I've just compared to a friend's previous generation iPod and there is definitely a loss in sensitivity. -
Since updating to iOS 6, my 4th gen iPod touch, and my 3rd gen iPad has sound in and out. Sometimes it's on, and then all of a sudden, no sound. I've tried everything from restarting to fully resetting each one starting fresh, but nothing. Please help.
I have exactly the same problem. I have tried almost everything and I am nowhere near an Apple shop as I am working in Africa.
Did you manage to find a solution? Help please if possible. Regards Az -
I have a 4th gen nano that is loaded with my music library via a prior addition of Windows. I now have Windows 7 and when I access I-tunes and plug in my Ipod I get a list of my music but cannot play it. Open to suggestions on how to solve this this problem.
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.
Maybe you are looking for
-
How to print date in cheque box in sapscript??
Hello Guru, We have developed or design new form for cheque printing in sapscript how to print date in cheque box in sap. 1 6 1 2 2 0 1 1 thanks in advance. Thanks & Regards Richa
-
Can't download photos from digital camera after latest software update
Hi, since the latest update on the 28.9.08 I have trouble downloading photos from my Canon Eos 400D. I can't use "Digitale Bilder" anymore, nor Adobe Bridge Photo Downloader or iPhoto. I have to use my partners MacBook that doesn't have the update ye
-
Microsoft Arc Mouse not working with my Windows Xp home computer
I bought the MS Arc Mouse yesterday and plugged the USB into my home computer and nothing happened. I didn't get a popup saying "new hardware recognized" or anything and the mouse did not work. I tried the mouse in my mom's laptop and it worked insta
-
JS: how can find role in XML element attribute
Dear All, We could gather "footnote" XML elements as an array. But we need to filter the elements which has "role=endnote" in the attributes from the group of common footnote tagged elements . Eg. <footnote xml:id="en2" label="2" role="endnote"> from
-
Hello!! I´m developing a Sharepoint 2013 login form (Sharepoint 2013 application) and I need to check if a cookie generated in another Web app is present then login using information stored in this cookie (No critical info stored here). I know the co