My 6th generation nano is stuck in diagnostic mode. I tried resetting it but itunes does not recognize it. I've tried holding down various combinations of sleep, volume up and down without any success. Any thoughts?
6th generation nano is stuck in diagnostic mode
Hopefully this will help you. Try placing your iPad in recovery mode again. You may have to try this a few times.
iOS: Unable to update or restore
Similar Messages
-
I was Updating my Iphone 4s to iOS 6 through itunes. an error happended now iphone stuck on connect to itunes logo screen . tried tukrning on and of it connects but itunes does not recognize so i can restore .. any ideas?
Dont know if accidently fixed it or not i got it to be recogniced by itune im restoring it now. i held the power/sleep button till turned off. then while holding the home button under the screen connected it to the usb wire .. also i change the usb port i was using on my computer dont know if it was luck or what but glad i got my phone back.
itunes recognized it as in recovery mode
http://support.apple.com/kb/HT1808
got it working currently restoring from backup good luck guys -
when I connect my iPhone, iPhoto opens and the phone begins charging but iTunes does not recognize it and I cannot sync. Any advice?
Howdy AndieKanaras,
It sounds like your iPhone is being recognized everywhere but in iTunes. I would use the troubleshooting for that issue in the following article, named:
If you don't see your connected device in iTunes for Mac
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
ThanksThank you so much. Guess i just have to upgrade now.
-
The iPad does not ship unless he closed
ITunes does not recognize or computer
If he shipped fully closed device
I bought a charger and bought Link and the same problem persists
IPad without JelbrakWhat do you mean 'does not ship unless he closed' ? What are you trying to do with your iPad, and what happens when you do it ?
If your computer's iTunes isn't recognising the iPad then do you have the latest version of iTunes installed on your computer ?
device not showing in iTunes on a PC : http://support.apple.com/kb/TS1538
on a Mac : http://support.apple.com/kb/TS1591 -
and the home button doesn't work so i cant try the home button and power button method. Should i get my home button fixed and try it or is it something else?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Itunes does not recognize any calender to synchronize with
My computer is repared and has a new hard disk.
I have installed the latest version of iTunes and Outlook 2010 on my computer.
I want to synchronize my iPad with my computer, but iTunes does not recognize any calender to sync with.
In the old situation I synchronized my iPad with Outlook 2003. That worked fine.
During the repare-time my iPad has become leading.
How can I solve my problemHello SCorky,
The following article provides steps that can help get your devices back into iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Allen -
I synced my iPhone 4 and now I am stuck in recovery mode. iTunes does n
iOS: Device not recognized in iTunes for Windows
Click the link for full instructions: http://support.apple.com/kb/ts1538
5. Verify that the Apple Mobile Device USB Driver is installed
If the device is not recognized while in Recovery Mode
Note: If your device is working on its own and is not in recovery mode, this set of steps is not for you; do not manually place the device into recovery mode.
Your device may not be recognized while in recovery mode. This can happen during an update or restore of your device. Typically when your device is in recovery mode, it will show the "Connect to iTunes" logo on its display. If iTunes does not recognize the device when in this state, try the following:
Open the Device Manager:
Windows XP: Click Start > Run. In the resulting dialog, type devmgmt.msc and press Return.
Windows Vista or Windows 7: Click Start. In the dialog, type devmgmt.msc and press Return on the keyboard. If Windows needs your permission to continue, click "Continue".
Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type devmgmt.msc, and press Return.
Click the plus icon (Windows XP and Vista) or the disclosure triangle () (for Windows 7 and 8) next to Imaging Devices, Other Devices, Portable Devices, and Universal Serial Bus Controllers to expand these sections.
Check these sections for one or more entries called Apple Mobile Device (Recovery Mode). These entries may or may not have exclamation marks on them similar to the following:
If you see only one "Apple Mobile Device USB Driver" entry that has no errors on it:
If you see two "Apple Mobile Device (Recovery Mode)" entries with exclamation marks on them: -
I am looking to turn my iPad into a portable device to store and view multiple files transferred from my pc. I have tried some apps but it does not support multiple sub folder transfers. Any suggestions please?
I use GoodReader on my iPad and use the GoodReaderUSB tool. the GoodReaderUSB tool allows you to transfer entire folders into GoodReader without loosing the folder/file structure.
Windows: http://www.goodiware.com/usb/GoodReaderUSBWin_200.zip
Mac: http://www.goodiware.com/usb/GoodReaderUSBMac_202.zip -
We just added a new printer and bluetooth connection to our iMac. Now iTunes does not recognize our iPads as devices. Have already tried restarting everything. Any other suggestions?
You can try the steps recommended here: http://www.apple.com/support/ipad/assistant/itunes/
-
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
Itunes does not recognize my Iphone 4. I did a restore on my phone about four months ago.. Does anyone have any suggestions as to what I can try?
try deleting these preference files
•C:\Documents and Settings\Your Username Here\Application Data\Apple Computer\iTunes
•C:\Documents and Settings\Your Username Here\Local Settings\Application Data\Apple Computer\iTunes
•C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\SC Info -
I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?
Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck. However...
http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
LR 5 does not recognize my external hard drive. It has recognized this drive in the past. No help at any Adobe site.
My external HD contains photos I have worked on in the past.
Additionally, I have added photos to LR5 directly onto my Mac HD. (38
photos added when working in the absence of my external HD)
Presently, in the Library mode, the Le Cie external HD is not seen in the
upper left hand corner "Source" location.
The only way to "see" the La Cie HD and its photos is in the "Import" mode.
These photos have previously been imported.
I wish to use the La Cie HD as my source in the Library mode and proceed to
the Develop mode.
In other words, work on my previously imported, previously worked on
photos, now on the La Cie. -
ITunes does not recognize 5th Generation video iPod in WinXp
PROBLEM: 5G iPod not recognized in iTunes (shows as removable hard drive in My Computer) via USB on HP Pavilion Notebook running WinXP. Latest error states insufficient power to run hi speed USB device on this computer. HP support replies that installed USB should comply to 480 Mbps hi speed standard. Trying to connect iPod via firewire results in "iPod can not be connected with firewire" error. Have tried the following steps before reaching this point:
Description of iPod: 5G, 30 gig video iPod model MA002LL contains 1.2 gig data (282 songs, 4 videos, 0 pictures)
Action: 5G iPod worked fine until connected to download purchased music 3 weeks ago.
Result: iPod screen shows "Do not disconnect" iTunes does not recognize iPod.
Action: Reset iPod (iPod works fine when not connected to any computer).
Result: same as above
Action: Recharged iPod overnight with wall outlet to confirm full charge.
Result: same as above
Action: Tried to run iPod Updater but iPod was not recognized by Updater (it does recognize iPod Mini and 4G)
Result: same as above
Action: Reinstalled latest version of iTunes.
Result: same as above
Action: Reinstalled COM interface for IPod Service several times.
Result: same as above
Action: Ran repair maintenance on iTunes (repair successful).
Result: same as above
Action: Uninstalled iTunes and iPod software, deleted their folders and bin files and cleaned out Temp directory, disabled virus protection and disconnected from network. Ran Windows Installer Cleanup Utility. (Uninstall successful)
Result: same as above
Action: Restarted and reinstalled iTunes and iPod Updater
Result: same as above
Action: Diasabled all non critical items in start menu
Result: same as above
Action: Uninstalled all three USB controllers
Result: same as above
Action: Reinstalled USBs
Result: same as above
Action: Tried to connect by firewire
Result: Error this device cannot be connected by IEEEE use USB cable.
Action: Talked to HP support to confirm USB standards on Pavilion Notebook.
Result: USB should read all 3 standard data speeds up to hi speed 480 MBps
Action: Tried 5G iPod on 2 other PC desktops with WinXP with powered USB 2.0 ports
Result: iPod shows "Do not disconnect" iTunes does not recognize iPod and both computers respond with the following error (which is not received on the notebook) "insufficient power to run hi speed USB device on this computer" both Desktops are older than the Notebook and have older versions of USB 2.0.
Action: Tried it on my iMac G4 thinking I could reformat it. Mac understandably does not read it as a drive. I tried the following three connections:
1) Firewire connection: iPod screen shows: firewire connection is not supported; 2) Powered USB port connection: drive is not recognized by Mac and iPod screen shows do not disconnect; 3) Unpowered USB port connection returns an error of "USB Low power notice" on Mac monitor and iPod screen shows menu but won't connect to Mac.
QUESTIONS:
Has the 5G iPod reached a point where it now pulls too much power to be read by USB? Is HP not giving me correct specs regarding the performance of the Notebook's USB? Why can I update my iPods with firewire on my Mac but not the PC? Any suggestions regarding what I should try next?
Thanks.
HP Pavilion dv notebook Windows XPSolution was found: HP was encountering a conflict with a trial version of Symantec Security Center and Norton Anti-Virus causing an incomplete install of iTunes.
The following actions resolved the problem. Uninstalled both Symantec applications, uninstalled QuickTime 6*, installed QuickTime 7.1.3 (iTunes would not install successfully prior to this step, seems redundant but worked), installed iTunes 7.1 (with Quicktime 7.1.3 again), connected iPod 5G which was finally recognized, received error that iPod was currupted, restored iPod and is now working fine.
I hope that this helps someone else with similar video iPod problems.
Maybe you are looking for
-
I want an app but is in another store
I want an app but it is in another store how can I change de store.
-
Introduction of flow control and synchronization steps in Test Description
Hi ALL, I am working on developing of Test Scripts in ATML standards. Can any one inform me how to introduce flow control (if, else, end, for, while, break etc) and synchronization (wait etc) steps into the Test scripts. Thanks in advance.
-
I want to make music I created a ringtone...can it be done?
I'm a musician and I would like to use music I created on protools as ringtones. I've tried several options such as creating AAC versions of cliped songs through Itunes but can not seem to make them ring tones. Has anyone else tried to do this and ha
-
Interval Since Last Panic Report: 177216 sec Panics Since Last Report: 1 Anonymous UUID: 3E21F002-A48E-5050-6C20-1DB0AAA94D06 Tue Sep 3 11:32:45 2013 panic(cpu 6 caller 0xffffff7fb0898f1a): "GPU Panic: [<None>] 3 3 5f 1d
-
Firefox no longer prompts for my username. What controls this?
I use firefox v32.0.3 on a Google Nexus 7. I want it to prompt for my username when I connect to GMAIL/Contacts etc. I goto settings=>privacy->clear private data. It prompts for my username the 1st time, and then afterwards it just allows direct cont