My 7x7 book will only upload as a hard cover and not a soft cover.
I spent this afternoon putting together a simple 68-page 7x7 book in the book module today. My intention was to upload it as a soft cover book. I tried to do that several times this evening, but after LR had rendered the pages and uploaded them I would get a error related to "BookCover" size.
A little research suggested bugs in the system did not like two-page photo spreads, but I was not using any two-page spreads. Still, I chose a couple of different cover layouts and tried to upload each one. Unfortunately, I got the same error.
So I put everything back the way I had intended it to be to begin with and decided to see if it would upload as a hard cover. Lo and behold, it did!
But I don't want this book as a hardcover. It's a book of Instagram shots and I was specifically going for a more informal look.
Is there something obvious I am missing here? I've also been working on a larger book (with two-page photo spreads) and I'm a bit worried that I'm going to get an error when it comes to uploading that as well.
Thanks,
Shannon
So a fault in the Hardware Raid controller could make it not read properly? I am planning on having a good backup set up after this!
As for the screenshot, the original was not set up with the SoftRaid. When I got the computer back I installed that to see if that may pick it up and make it at least readable to save the data on it. The two in question are the highlighted 4TB drives, which befor also read as one drive as it was set up in the OWC enclosure as a hardware raid.
Similar Messages
-
I created a new library so I can use it for just my music, but now my ipod will only sync to my old library and not the new one I created, even though I'm in the new library when I open itunes. Any solutions?
The point is that there are four i product users for one computer in my house, and not everyone wants the same music on their device. Like I said before, the ipod is not syncing to the new library even though I plug it in when the new itunes library is pulled up. It keeps syncing to the old library...
-
I downloaded a book sample to iBook. I deleted it and then bought the full book and downloaded it. The search engine keeps only searching the sample, about 50 pages, and not the full book. How do I get the search engine to search the full book?
I am having this exact issue. I just downloaded a book and went to open it and got this exact problem.
I purchased he book through indigo/kobo edition and paid for it and immediately went to open it and am getting the same error
Error getting License. License Server Communication Problem only mine says Bad Device key after.
Not sure why someone has not answered this question yet...i am using windows 7 and this is how i always do it. Never had this problem before when purchasing a book.
i hope someone answers this soon. -
IPhone will only charge on my car charger and not mains
Hello,
My iPhone 5 does not charge on its mains charger. I insert the charger into the iPhone and nothing happens. I have also tried charging on my friends chargers and it still does not charge even though the charger works for their iPhones. However It charges instantly on my car chargers. I have 2 car chargers and it works on both. The car chargers are not cable to usb chargers but Kensington car chargers.
Any solutions?
Many thanks,Bump.
-
Help! I am trying to upload movies from my iTunes to my iPhone and it will only upload a select few. Why?
You are using File->Add File (or Folder) to Library, right?
Make sure that you also look at the various categories of content stored on the library: turn on the sidebar (Ctrl+S keys toggle) and click the categories to see if the content shows in the content window of iTunes.
It could be you are trying to add a video/movie in a format iTunes does not accept because it cannot play it or work with it. (And yes, if iTunes cannot add it to the library, it should absolutely report an error message rather than leave you wondering and drop the command.) -
the photos that I add to address book will only be there for a few seconds after I close the edit button. Either they go away completely or they are very small portion of the actual photo
Frank, thanks for your note. I wrote "COMPLETED" because I had gone to a lot of effort to get the content of the book precisely as I wanted it. I would fully expect to see my level of effort and care matched by functional competence in Aperture 3 to render the book the way I created it. Too much to ask?
And yes, I upgraded the Aperture 2 Library first. [Not ALL my tens of 000s of pix, because I use Lightroom selectively for photo editing. But Yes to the Aperture 2 Library.] That step took a number of minutes, but seemed to work fine (no error messages of any kind).
Then I opened the existing book project in Aperture 3, which followed some "magic-box" process that took a minute or so. As I said, when that step was done, by all appearances the book was ready to submit for printing - until I examined the photos a little more closely. You did see the blurry example I included, didn't you? That is what each and every photo looks like.
Text-box content appears to have been rendered pertectly, for the record (including captions).
So, ... is this result something you have heard of before? Do you know of a one-step solution? Or am I looking at an extended picture-by-picture fix? -
I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help
HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/
-
I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
Can anyone assist me with this issue?
ThanksTo downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again. -
On my ipod touch I'm not too sure how I uploaded a album onto my ipod from my laptop. But, now there is no way to delete the album full of pictures. What do I do? I only gotten it a while ago and not fully sure how to work it. Help?
http://support.apple.com/kb/HT4236
-
I have an old iPod Classic, 5th generation with video 30 GB. I sync via a pc. Since syncing it three days ago, the songs will only play the first three minutes and five seconds. Then it moves on to the next song or if it's the last song, it goes back to the menu. I just synced again and it it still doing it.It also has a small group of dots near the middle of the screen that weren't there before.Has anyone else had this problem or know how to fix it? Thanks.
Please disregard this question. I have a better worded version coming up.
-
My ipod wont play music solely through ear phones it will only play through the main speaker and the earphones together. Is this able to be fixed??
I am also experiencing some problems with the new software version, I bought the Belkin TuneBase for my car 25 days ago it had been working fine since I upgraded my Ipod 2 days ago, you know that sometimes if you don't get good reception you can change to a diferent preseted station on this Belkin Transmitter but since this Ipod upgrade I can't change to a diferent station and also i can't disconect it like before because before it said you were ok to disconect and I'm afraid to return because perhaps afterall is a software problem.
-
Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer? Then can i access these files only on the time capsule without connecting it?
igonneau wrote:
Can i get the time capsule to automatically back up my file from my Mac Book Air but have certain files which are only stored on the time capsule and not the computer?
You can, but how are you going to back up those other files? When (not if) your Time Capsule fails, you risk losing them. See #Q3 in Using Time Machine with a Time Capsule for details.
Then can i access these files only on the time capsule without connecting it?
Not sure what you mean. You have to connect a computer, either via Ethernet cable or wirelessly, to read or write to the disk. -
My ipod will only show the dead battery screen and wont taking a charge.
my ipod will only show the dead battery screen and wont taking a charge on any of my sinc cords or my outlet charger. And I have checked that nothing is in the plug port blocking the electrodes. What do I do now?
Put the device in DFU mode (google it) and restore via iTunes.
-
When I try to backup my files from photoshop elements 12 the "calculating total media size" box will only get as far as 46% and then freeze, how can I make it go to 100%
hi barbara
thank you for your response, i appreciate it. there's definitely nothing wrong with the mouse or trackpad, both work fine in every other application....i can also easily change size dimensions in other programs on my computer so it doesn't seem to be that either. it seems like there is something weird going on in the way that pse and my mac are interacting with each other, just wish i knew what it was. thank you again, wish me luck! -
Is there a way to only upload iWeb changes? I am not using MobileMe.
Is there a way to only upload iWeb changes? I am not using MobileMe.
One method you can use, along with optimizing your website for increased loading efficiency in browsers, is to publsh to a folder on your hard drive and use Web Site Maestro to optimize and upload only the new or modified files with its Smart Handling feature.
If you publish to a folder you can use the synchronizing feature of Cyberduck, help/en/howto/sync – Cyberduck, to upload only those new or changed files.
OT
Maybe you are looking for
-
Saw expression filter not working
I construct the SAW Expression as below: strBuf.append("<sawx:expr xsi:type=\"sawx:comparison\" op=\"equal\" "); strBuf.append( " xmlns:saw=\"com.siebel.analytics.web/report/v1\" "); strBuf.append( " xmlns:sawx=\"com.siebel.analytics.web/expression/v
-
Use data in productor obtained in the consumer
Hello everybody, I am doing my final degree proyect and I have a doubt doing it. I have to create 2signals in order to comando a valve and acquire an other one that comes from a preassure sensor. I have to substract the signal of the preassure sensor
-
Help getting Elements 11 onto a new Laptop
Hi everyone - Im sure this is the basic of the basic but Im having issues getting Elements 11 onto my new Laptop. I downloaded this onto my desktop about 8 months ago and having now upgraded to a laptop want to download to that too. I naively thought
-
Adobe Captivate 6 XSS Errors with scormdriver.js
Using Adobe Captivate 6.0.1.240 and getting critical issue errors from Fortify scans by our security group. Does anyone know of a solution? I haven't been able to see issues in google queries and in the forums. --thanks EXAMPLE scormdriver.js, line 1
-
Need procedure to exchane the code java to abap
hi, i have one issue.that is i have one web link that is developed by using the java programming.now i want to see that link in abap E.C.C 6.0.i need the procedure for that how to do and all. thanks.