My airport extreme shows a green light, but won't connect to the internet.

I have an airport extreme, and it stopped working one day, so I reseted it and it's not connecting to the internet now.  It's showing a green light, however, it won't connect to the internet. I live in an apartment complex, so I don't have a cable modem. The router is directly connected to the wall via ethernet. I had the ports checked by connecting the ethernet cord directly to the computer, and the internet is working fine. I tried resetting the router, but it still doesn't connect.

Your problem is typical Yosemite network.. just reboot the Time Capsule.. no luck reboot the network.. do a restart in correct order.. modem.. wait 2min.. TC .. wait 2min.. clients.
No luck then do a full reset of the TC and setup in a way that Yosemite can cope with.
Start from a factory reset. No files are lost on the hard disk doing this.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 for basestation and TCwifi wireless name.
If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Same thing applies to the Airport Extreme or the Express if used as router.. just replace TC in the instructions with AE.

Similar Messages

  • Why does my airport base station show all green lights but doesn't connect to the internet?

    I have an Airport Express Base Station that has been working beautifully up until this morning.  For no apparent reason (changes in ANYTHING), I cannot connect to the internet through it.  Here's the situation:
    The light on the airport is solid green.
    Aiport Utility shows all is well...the base station shows up, with green light, IP address, etc.
    Network Diagnostics shows "your connection to the internet seems to be working correctly."
    Connecting the modem directly to the computer via ethernet cable works fine...internet humming right along.
    Connecting the modem to the base station doesn't work, even though all green lights and "all systems go" diagnostics.
    Wireless access via iPhone and iPad not working, either, so definitely not computer-based issue.
    No changes have been made to anything.  I'm running 10.6.8 on a 2007 MacBook Pro.
    Can anyone help?
    Thanks,
    Nancy

    Hi Bob,
    Thanks for responding.
    Does that IP address start with 169, or something else?
    The IP address starts with 10.0...
    Does this mean that the iPhone and iPad can connect to the wireless network....but not get to the Internet?.....or.....does this mean that the iPhone and iPad cannot connect to the wireless network at all?
    They can see and connect to the wireless network, but aren't connecting to the internet, just like my computer.  Sorry for not being clear about that.
    Can you look on the side of the AirPort Express to locate the model number?  Hard to see, you may need a magnifying glass. Starts with an "A" followed by four numbers, as in A1264, or A1084, for example.
    The model number on the Airport is A1392.
    Any insights based on this info?  Thanks for your help.
    Nancy

  • Appletv recognizes my wireless network but won't connect to the internet. can't restore to factory settings

    appletv won't connect to the internet, but recognizes my wireless network. ip address starts with 169.. somethings not right. never had a problem with appletv and home sharing until the update that required a change in my apple id

    An IP address starting with 169 indicates you are not properly connected to your network. Try restarting your router and try to connect again. if the problem persists you may be suffering from interference.

  • IMac sees the ethernet but won't connect to the internet

    we had a power outage that crashed the imac.   now it won't connect to the internet.  the imac can see the ethernet connection.   we have several other apple and dell devices that all see the internet so it's not cabling or hardware.    it's a cable modem connection that uses automatic DHCP configuration.  I've created a new Location setting with no change.   I'm assuming that there is a corrupted file since all the other systems connect fine.  any idea which one it may be or what else I should be looking for?

    Shot in the dark, but did you try an SMC reset?
    SMC Reset
    Shut down the computer.
    Unplug the computer’s power cord and disconnect peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.

  • Rebooted my WRT160N, now my laptop connects to my network but won't connect to the internet

    I forgot my original network password so I rebooted my wirless router, now my computer reconizes my home's wireless network and connects to it (accepted the new password and everything), but when I open my browser it can't connect to the internet. My internet connection still works when I plug my laptop directly into my cable modem, and my laptop says I'm connected to my wireless network, so I don't know what the problem is here.
    I've been tearing my hair out for the last few hours trying to figure out a way to fix this, so any help would be greatly appreciated. 
    Thank You
    Solved!
    Go to Solution.

    Go here to verify your cable setup.

  • I finally got my airport express showing a green light, but

    How  can I tell if the wireless signal that I now get on my iPad, far removed from the Airport Extreme, is really coming from the airport express?
    Thanks
    Dan Page

    OK, thanks. Give this a try:
    The first order of business is to make sure that the AirPort Extreme is configured correctly for the extension. Keep the AirPort Express (AX) powered off for now.
    Open Utility -Select the AirPort Extreme - Click Manual Setup
    Click the Wireless tab below the row of icons
    Make sure that there is a check mark next to "Allow this network to be extended"
    Jot down the name of the AirPort Extreme wireless network and the exact security setting (it's probably WPA2 Personal) that is in effect.
    Click Update to save any changes
    Move the AirPort Express near your computer and the AirPort Extreme
    Perform a Factory Default Reset on the AirPort Express (AX) as follows:
    Hold in the reset button and keep holding the reset button in for another 10-12 seconds while you plug the AX in to power
    Release the reset button and give the AX about 40-45 seconds to restart, at which time the amber light will be blinking slowly
    Make sure that you are logged on the AX network, which will have a name like Apple Network xxxxxx. There is no password. Alternately, if you have a spare Ethernet cable handy, you can connect it from your Mac to the AX and then disconnect it after you have updated the settings.
    Open AirPort Utility -Select the AX -  Click Manual Setup
    Click the Base Station tab below the row of icons to name your device, assign a device password and adjust Time Zone settings
    Click the Wireless tab
    Wireless Mode = Extend a wireless network
    Wireless Network Name = Exact same name as your AirPort Extreme network
    Enter a check mark next to "Allow wireless clients"
    Wireless Security = Exact same setting as the AirPort Extreme wireless network
    Wireless Password = Same password as the AirPort Extreme wireless network
    Confirm Password
    Click Update to save settings
    As soon as you see the message that the settings have been stored, close AirPort Utility
    Wait 40-45 seconds for the AX to restart and you should have a green light
    Now locate the AX approximately 1/2 to 2/3 the distance between the AirPort Extreme and the area that needs more wireless coverage. Minimize obstructions in the signal path as much as possible for best results.
    Apple's instructions are here as well: http://support.apple.com/kb/HT4259

  • Airport Express with Green Light but won't connect to iTunes or Airtunes!

    Hi,
    I've had my Airport Express for a while and have just set it up in my new house with an Orange Broadband wireless router.
    I originally got it set up to play music from my Macbook to my Hifi (that's all I use it for) and it worked fine.
    I have now been on holiday for 2 weeks and switched it off.
    Now when I turn it on the green light is on however the Airtunes option doesn't appear in iTunes and the Airport doesn't show up anywhere on the computer.
    I have reset and set it up again and it still doesn't work.
    My wireless internet is working fine and the Airport light is constant green as normal however I can't use it for the reason I need.
    I normally have issues with it but nothing I try seems to work for this.
    HELP!
    Thanks in advance
    Jem x

    I've solved this by resetting my wireless internet connection at the box and then setting up airport express again.
    I don't know whether that will help you.....

  • Airport Express has green light but won't connect to remote speakers from Macbook or iPhone

    Hi,
    I have a 6-7 year old airport express that I have used frequently as remote speakers for my macbook and 2 iphones. I am currently having problems with getting this to work in my new flat. It worked for a few weeks and now he green light is on but the remote speakers time out when i try to connect to it.
    Sometimes the airport is visible in itunes/iphone and sometimes it isn't. when it isn't if i unplug it and leave it a while it appears again but i cant connect but the green light is always on.
    It's all set up properly so I don't know if it is just getting old and I need a new one or whether this can be solved.
    I have reset this numerous times
    Thanks in advance!

    I've solved this by resetting my wireless internet connection at the box and then setting up airport express again.
    I don't know whether that will help you.....

  • TS1398 my ipad is connected to my wifi network but won,t connect to the internet, i have tried resetting network settings but it still won't work.

    my i pad is connected to my wifi network bt won't connect to the internet I have tried resetting network connections. it will connect to the internet from my phone hot spot

    Try restarting your WiFi router by removing power to it for 30 seconds.

  • My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.

    My iMac is able to use my wireless internet from my airport extreme, however, no other devices(iphone, ipod) will connect. The network shows up, but the indicator just spins without ever joining.
    I have tried resetting my airport extreme, creating a new network, etc nothing seems to work.

    I have a feeling you may be stuck in bridge mode there...
    Factory reset the Extreme (so we don't second guess later), and re-set up the extreme using iOS5 on your iPhone.
    Set up your Wi-Fi network with your iPad, iPhone, iPod touch, or Mac.
    http://www.apple.com/airportexpress/features/easy-setup.html

  • We use an Airport Extreme in my office, which works fine for me. Occasionally we need to have more than one computer running on it, but for some reason it won't connect to the internet. It says we have internet, but won't connect to wifi. What's going on?

    I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
    Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
    Thank you!

    Here's an update:
    Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

  • I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

    I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
    I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
    I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

    have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • What to do if you can't access a wifi network and showing you message that your airport has a self-assigned IP and cannot be connected to the internet?

    Hi,
    i am currently using 10.6.8 snow leopard
    i usually access internet through my broadband modem and wifi at home.
    i've been using our home wifi network for almost 1 week now (since it's new) and almost everyone at home use it as well.
    and im using my broadband everytime i go out.
    this last week, i went to a vacation and i use the wifi connection of the hotel where i stay in.
    my connection works fine and so i don't use my broadband anymore.
    then i got home..
    when i got home..  i tried to connect to our home wifi network again .
    like what im doing before, im clicking the airport icon on the top of my desktop,
    and since my airport is always on, the next step that im doing is to click the preferred network that i want to join and put the password on it.
    this is perfectly working in my macbook before i left.
    but now , it's not working to my laptop anymore! i can't connect to it!
    after putting the password and hitting the enter, the airport icon at the top will run, however after seconds it showing gray color with exclamation point on it!
    the alert is showing : No internet connection
    but the network i joined is still checked and showing full signal !
    i tried checking my Network under system preferrence and the airport tab in the left corner is showing me a message that
    my airport has the self-assigned IP address 169.***.****.** and will not be able to connect to internet!
    i don't know what happen and i dont understand why is this happening since everyone at home can still use and access our home wifi !!
    it's the same network that i'm trying to connect to anyway!
    i tried using my broadband instead to connect online and it works fine!
    but everytime i try to connect using wifi at home , again i cant connect!
    anyone can tell me what's going on?
    i haven't try joining other network anyway! but i'm planning to do so..
    can some one help me please??
    showing me a message that
    my airport has the self-assigned IP address 169.***.****.** and will not be able to connect to internet!

    and now, when i tried to check again my network preference below the airport tab is showing a message that
    "my airport does not have an IP address and cannot connect to the internet!"
    then after seconds it will goes back to the first message that
    "airport has the self assigned IP address etc....."
    i don't know whats going on now!
    airport tab is not showing green color anyway! i'ts always in yellow!
    i tried turning it on and off but nothing happen! HEEELLLLPP!!!!

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

Maybe you are looking for

  • [SOLVED] log into KDE given a blank black screen with mouse cursor

    hi, noticed kwin using much higher cpu usage then normal, restarted KDE, everything seemed ok and then, while copying a file over to a samba share, my desktop went black with only a mouse cursor. Restarted KDE, rebooted pc, reinstalled KDE (everythin

  • Can I use Remote Desktop to run Windows software from my Mac

    Here's what I want to do: 1) Set up a small office LAN with an Apple Xserve as the file server; clients are mostly iMacs but a few PCs. 2) There are one or two software apps I need that exist only in the Windows world (such as a good document compari

  • IOS/safari problem

    Hi, I'm using the sap.ca.ui.ExpansibleFeedListItem control in a list. When the type is "Navigation", a small arrow should be displayed at the right side of the list item. That works fine, except on a iOS device or in the safari browser. Is this norma

  • ORA-01795: maximum number of expressions in a list is 1000 error

    Hi when ever values specified for 'IN' operator in select statement exceeds 1000 then I am getting this error. How to over come this problem? my query is like..... select itemid from item where itemid in (1,2,3,...........) which is executing fine in

  • HU - Physical Inventory

    Hi Gurus, I have a problem with HU inventory. When I create a TO, the systems creates a PICKHU which is considered as a Storage Unit. Then I empty this Storage Unit, but it stays as a Handling Unit in my system. If for some reason I need to do a phys