My AirPort Extreme will only let me have one device on the wifi at a time. How do i put multiple computers, phones, and wireless devices on my wifi network at the same time?

I have a Macbook Pro and it works perfectly fine on my AirPort extreem until I try and put a different computer, ipod, or phone on the wireless. When I try and put more than one device on the network only one device will receive internet access and the other(s) will get a message saying it is because of a shared ip address. Is there a way to change it so they can all share an ip address? Please help me configure my wifi and devices so that I can use more than one device on the wifi at a time.
Thanks!

Hmm... Those two screen shot disagree. the first shows that the duplication was on 192.168.1.64, while the second showed you were using 192.168.1.63. That confuses matters further.
From the screen that you show, click on the "Advanced..." button in the lower right, then the "TCP/IP" tab.
SHow us a shot of the screen or copy the text from the "Configure IPv4" line and the three under that (IPv4 Address, Subnet Mask, and Router).
Then launch AirPort Utility.
If you have one of the old 5.6.x versions:
* Click on the icon for your Extreme.
* Click on the "Manual Setup" button and supply the password if needed.
* Click on the "Internet" icon at the top.
* Click on the "DHCP" tab.
* Give us a screen shot or transcribe the results.
If you have AirPort Utility 6.2 (the latest):
* Click on the icon for your Extreme.
* Click on the "Edit" button in the balloon that pops up, supply the password if needed.
* Click on the "Network" tab.
* Give us a screen shot or transcribe the results.

Similar Messages

  • HT204411 i am trying to purchase many songs at one time. i have added all songs to wish list , now to purchase it will only let me  do one at a time  please advise how i can purchase more than one at a time

    i am trying to purchase many songs at one time. i have added all songs to wish list , now to purchase it will only let me  do one at a time  please advise how i can purchase more than one at a time

    There used to be a 'buy all' button on the wish list screen but for some reason that has been removed from the current version of iTunes so you will need to buy each item individually. You can try leaving feedback for Apple and maybe it'll be added back in a future update : http://www.apple.com/feedback/itunesapp.html

  • How come my iPod Touch will not let me get the latest software update and will only let me have the 3.1 update?

    My iPod will only let me get the 3.1 update and I don't know how to get a later update.

    What happens when you try?
    Error message?
    Do you have the original ipod touch?  If so, then  3.1 is the latest software.

  • Airport extreme will only get or send e-mail messages, or allow Safari to function for about 5 minutes.  After that it doesn't respond even though the green light is on and diagnostics says there is nothing wrong. Have to unplug again to get a response.

    For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work.  The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing.  The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
    Any ideas?
    Thanks,
    Greg
    (I plugged my laptop directly into the modem in order to send this message.)

    For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work.  The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing.  The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
    Any ideas?
    Thanks,
    Greg
    (I plugged my laptop directly into the modem in order to send this message.)

  • 1st Gen iPod Nano Will Only Let Me Add One Song At A Time!

    Hi. I've got a 1st Gen Nano that has worked fine until recently. Last night, I decided that I wanted to reorganize my library and cleared all the songs off my iPod. I normally maintain my library manually, and have more songs than I do space (I have 4GB), so I wanted to pick and choose the songs I put back on.
    I highlighted multiple songs and dragged them over to my iPod, but after three or four, they suddenly stopped transferring. I tried this over and over but the same thing kept happening. Then I tried to automatically sync it just to see what happened and, again, after just a few songs, it simply stopped. (Note that it never froze up or anything.) I shut down, rebooted my laptop and tried yet again -- same thing. I even restored my iPod to factory settings and THAT didn't help.
    Apparently, I can only add songs one at a time now -- and I don't get why. I'm wondering if it could be the USB cord? I feel like that could be the issue, yet I wonder if a damaged USB cord would allow any transfers at all...
    Any ideas? Thanks in advance...
    -Heather

    Welcome to Apple Discussions!
    Try a reset...
    http://docs.info.apple.com/article.html?artnum=61705
    Also, does it work right in iTunes? Are all the songs checked?
    Merry Christmas
    btabz

  • Would like to setup guest network apple airport extreme will only allow limited access

    imac 10.9.3 connected to internet with airport extreme /xfinity router trying to setup guest network can't connect to internet

    The guest network feature of the Apple routers will work correctly when the Apple device connects to a simple modem.......not a modem/router or gateway type of device.
    If the guest network feature is important to you, check with your Internet Service Provider to see if they can supply you with a simple modem......which will then allow the guest network feature to work correctly on your network.

  • E72 will only let me create one Access point per d...

    Hi,
          Not sure if I'm missing some thing, but I am trying to create multiple access points.
    For example a wireless LAN connection for work and one for home.
    The E72 will allow me to have a access point under INTERNET and sets it as priority 1.
    When I try to and another it will set it as unconsecrated and will not allow me to move it to the INTERNET destination.
    If I try to create the access point from the INTERNET destination the phone will lock up and I have to power cycle to be able to start over.
    I have the latest s/w update installed.
    The phone was locked to t-mobile but is now unlocked.
    Has anybody else seen this issue ?
    Thanks for any help.

    Hi chelcon2013,
    You will need to change the Apple ID on your iPhone using the steps in this previous thread -
    How do I update the Apple ID used on my iPhone?
    https://discussions.apple.com/thread/5231672
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Have just up dated my iphone 4 to ios5, is the notification centre supposed to show as icon on the main screen, if so how do i get it to show and also i thought you could now use the camera direct form the locked screen?

    Have just updated my iphone 4 to ios 5, is the notification centre supposed to appear on your main screen as an icon if so how do i get it to show, and i thought you could now use the camera from the locked sreen i can't seem to this at the moment can anyone help? thank you

    Double click home button for camera to show up (and iPod).  Notifications seem to show up on lock screen that way, too.

  • I got a new macbook air and took my old macs back up and put it on the new macs desktop.  How do I put my old files and apps to have this new computer look like my old one?

    Help!  Please!  Thanks so much!!!!!

    Well, I don't know how you made the backup nor how you restored the backup. However, you don't put an entire backup on to the Desktop.
    I suggest you do the following:
    Open Users & Groups preferences. Click ont the lock icon and authenticate with the admin password you are currently using. Click on the Add [-] button and create a new account named "temp" (no quotes) and give the account admin status. Assign any password you want (but assign a password.)
    Log out of the account you are using and log into the new, temp, account. Open Users & Groups preferences, click on the lock icon. Authenticate with the password you used for "temp." Select the other user account (not the one named Guest) and click on the Delete [-] button. Select the third removal option and click on the OK button.
    Connect your backup drive. Open Migration Assistant in the Utilities folder. Select the option to migrate from another Mac or connected hard drive or select the option to restore from a Time Machine backup if TM was used to back up your old computer. Restore your old Home folder, third-party applications and support files, and system preferences per instructions in Migration Assistant.
    After the migration has completed (will take several hours) log out of "temp" and log into your newly migrated account. Open Users & Groups preferences. Click on the lock icon and authenticate with your normal account's password. Select the "temp" account, click on the Delete [-] button. Select the third option and click on the OK button.
    You should now have just one user account. The one migrated from your old computer.

  • Upgraded to Lion, CS3 programs will only let me open 1 photo per session, what gives?

    Just upgraded to Lion from Snow Leopard. Now my CS3 Creative Suite programs will only let me open one picture per session. I then have to completely close out of photoshop or illustrator or whatever and reopen to open another picture. Any suggestions before I have to take my computer to the apple store.

    http://roaringapps.com/ show some people having problems with various things. Have you tried reinstalling CS3? If that doesn't work, restore from a backup if needed to stay in production until a solution or an upgrade can be worked out.
    I'm not sure the Apple Store will troubleshoot 3rd party software that is 3 versions old.

  • My new AirPort Extreme will not turn on anymore, no lights when plugged in.

    My new AirPort Extreme will not turn on anymore, no lights when plugged in.  I just bought it a few days ago. It has been working fine. I left the house for most the day and when returning home it would turn back on. I have tried to plug it into other outlets...nothing, I've tried the reset button...Nothing.

    That is reported here a few times.. just take it straight back to apple or place of purchase for immediate exchange.

  • I have downloaded a game from i tunes but I can't see it in both phone and PC

    I have downloaded a game from itunes but I can't find it in both my phone and my i tuner account. What is the problem?

    When did you buy/download it ? If it's still in your country's store, and it's not an iPad-only game, then it should show in the Purchased tab in the App Store app on your iPhone, and the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your computer's iTunes. If it's not showing there, and it's still in the store, then check to see if it's hidden : http://support.apple.com/kb/HT4919

  • TS1702 I have approximately 400 lives in reserve as gifts from friends in Candy Crush, but every time I try to access them, the screen turns blank. It will only let me use the 5 lives you are given every 30 minutes. Updates are up to date.  Any suggestion

    I have approximately 400 lives in reserve as gifts from friends in Candy Crush, but every time I try to access them, the screen turns blank. It will only let me use the 5 lives you are given every 30 minutes. Updates are up to date.  Any suggestions?

    Contact the app develed.

  • When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

    When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
    == This happened ==
    Every time Firefox opened
    == I updated to one of the firefox versions (Not sure which one it was)

    Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

  • I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8.  Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8?  Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

    The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    System Requirements for 10.6:
    Mac computer with an Intel processor
    1GB of memory
    5GB of available disk space
    DVD drive for installation
    Some features require a compatible internet service provider: fees may apply.
    You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
    10.8 Mountain Lion is a download from the App Store, the price is $19.99.
    Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
    Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Maybe you are looking for

  • Multiple devices with iMessage, FaceTime and calendar in the cloud

    Hi There are a number of posts on this, but this is what I do and the issues I face: My wife and I use a common apple ID for: Notes Reminders Calandars Photostream (when it works, but there are other postings on that) Apps i.e everything else, Music,

  • How to add a input field for personal ID in My Account - Personal Data

    Hi, I am new for B2C shop development. Now I have to add a ID number in Personal Data of My Account in B2C shop. This field is in the assignmemnt block of Identification Number, but it seems not easy to add this field in B2C shop JSP page. Gurus, wou

  • Problem trying to play recorded DVD from TV

    I know there are compatibility problems, but I am wondering if anyone knows a neat way round them. I recorded a TV programme onto DVD+RW but can't get it to play on the Mac. Options to consider? Software download perhaps? If so, which one? File conve

  • Firefox immediately reports problem on start and cannot be opened in safe mode.

    Anti-virus and anti-malware are run and no problems reported. Firefox reports error: firefox.exe has encountered an error and needs to be close. Firefox will still run for a little while but eventually crashes. Same problem in safe mode. The weird th

  • Multiple call of update function module

    Hi Everybody, I have made implementation to the definition MB_DOCUMENT_BADI( material Document creation). While executing this BADI I am getting short dum with this error  Multiple call of update function module. Here is the short dump-- In the FORM