My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Similar Messages

  • Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

    Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
    Please help to set it up, thanks in advance

    You need to give more info..
    Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
    Most likely you have bridged it when it should be in router mode..
    Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
    Change it to working as a router. That might help.
    If you press reset button it will default back to router btw.
    If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

  • I am using SURPLUSMETER :) I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card ,

    I am using SURPLUSMETER I am also using Apple Airport Time Capsule as my Router that is connected to my Satellite dish Internet Modem ... Now on the Surplusmeter I have the option for PPP Modem . Ethernet Port , Airport , Network Card , & Adaptor .
    Which one can I use properly to monitor all the wireless Devices in my hous

    Actually, none of the options will do what you are looking for it to do. That is because, this application only monitors the traffic from the device it is hosted on. That would also mean that you would have to run a copy on each computer that will access the Internet on your network; note their individual usages, and then, combine them to get an idea of the total usage.
    However, if you are only interested in the amount of Wi-Fi traffic that only your computer is seeing, then the "AirPort Network Card" option would be the correct choice.

  • Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?

    Airport time capsule does not appear within wi-fi networks on my OSX neither on my IOS devices, even though the backup for my OSX is on progress. why it does not appear?
    Is it because the backup on progress?

    Hmmm.. ok.. well you are kind of on your own.. purchasing from another country leads to problems.. especially as the TC itself is regional .. all the setup applies to the region it is sold in.
    Make sure you are using ipv6 in the computers..
    See
    http://support.apple.com/kb/TS4597
    The 6.3 utility will not work without it.
    Make sure all names are short, no spaces and pure alphanumeric.
    Do a full reset and start over.
    But there are no more controls.. you cannot set mode..
    You can set wireless channels.. so do .. try different wireless names for the different bands.. and set fixed channels.. whatever your country allows, usually 2.4ghz you can use 1, 6, 11 but 13 maybe an option as well. 5ghz is much less clear and there are more variation. Just set to one channel and then another.
    Set WPA2 Personal security with a 10-20 character password .. pure alphanumeric mix of upper and lower case and numbers.

  • I'm looking for the adobe suite 5.5 and it says it will only work on leopard or snow leopard... but i'm running on lion... anyone know what to do here?

    i'm looking for the adobe suite 5.5 and it says it will only work on leopard or snow leopard... but i'm running on lion... anyone know what to do here?

    Hi.
    I'm guessing that you'r not buying a new edition of the Adobe Suite 5.5.
    Apparently Adobe haven't been awake to make sure the 5.5 is 100% compatiable with Lion. However, I do believe it's only a few minor troubles you will experince and Adobe constantly update their software to adjust to Lion.
    You should go to Adobe.com and see the list of known issues.
    Best regards.

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Before when I clicked on a hyperlink in a Pages document Pages immediately opened the link.  Now Pages ask if I want to "Edit or Open" the link.  Is this an option that I can turn or off or is this just a change with the latest update?  Thi

    Before when I clicked on a hyperlink in a Pages document Pages immediately opened the link.  Now Pages ask if I want to "Edit or Open" the link.  Is this an option that I can turn or off or is this just a change with the latest update?  This only started in the last six months or so.
    iWorks "09"  Pages ver 5.2

    Use Pages '09 which should still be in your Applications/iWork folder.
    Peter

  • I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

    I am trying to look at my I cloud account on a pc in the library it normally works fine but now says problem connecting with the server. what can i do or is there an issue today

    Hi...
    Try restarting the AMDS >  How to restart the Apple Mobile Device Service (AMDS) on Windows
    iCloud system status reports everything green >  Apple - System Status

  • I have been trying to restore my iphone5 with icloud back up. Keep getting an error. Any trouble today with Icloud? what can be happening? (I restored it yesterday to an older back up and it worked perfectly!!)

    I have been trying to restore my iphone5 with icloud back up. Keep getting an error. Any trouble today with Icloud? what can be happening? (I restored it yesterday to an older back up and it worked perfectly!!)

    From your other post on the same subject.
    my iphone not restoring to icloud today. I restored it yersterday to an older copy and worked perfectly...  Any troubles today with ICloud? what should I do?

  • My time capsule doesnt work when its conneted direct cable modem, and it start working from netgear router

    I just bought a Airport Time Capsule, time capsule is connected direct from wan to cable modem (it doesnt work). when i connect it to lan port 1, it start working. normal process i know is from cable modem to wan port. 2nd i notice, network is on bridge mode. so my question is how do i make it to work from modem to wan port.

    What model is the modem? Is it a pure cable modem or a combined modem router?
    This maybe important as the current model TC does have issues with some of the popular cable modems.. SB6121 or 6141 being often the ones complained about here.
    If it is a pure cable modem (most will have just one ethernet port). Then power down the modem for 20min. This allows enough time for the MAC address of the first device connected to be lost at the ISP end so it is ready for a new router.
    The TC must be in dhcp and nat mode.
    Please factory reset the TC and start over.
    The Factory Reset universal
    Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
    Release reset.
    If it doesn’t flash rapidly you have released reset at some point and try again.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    By default the TC is in router mode after a reset.
    Restart the modem.
    The power up the TC and run through the setup utility.
    The TC should then be accepted as the main router in the network.
    If this fails check the WAN ip address. If it is 10.x.x.x or some other private IP you did not turn off the cable modem for long enough.. Try again only this time leave it off longer. (Some ISP it is just 5min.. some 15.. some will require 60min or overnight).

  • Is the AirPort Time Capsule only for backing up Macs or can I back up additional files from SD cards too as if it were an external hard drive?

    I'm a professional photographer and I'm interested in the most recent features of the AirPort Time Capsule. I process a lot of data and much of it never hits my Mac hard drive. Currently I back up to external hard drives, but is it possible to back up files from SD cards mounted on my desktop on to the AirPort Time Capsule for instant access in the future as if the drive were an external hard drive (in addition to being a back up server)?
    I appreciate input!

    If your question is whether Time Machine can back up the data on the SD drives, the answer would be no.
    The reason for this is that SD drives are formatted in Windows FAT16, which is not compatible with Time Machine, the backup application included with Macs.

  • I just got an Airport time capsule 2TB. When I start back-up it backs up about 17kb and then stops but says Calculating time remaining.... Anyone got an idea of what's going on?

    Just got an Airport Time capsule,
    I set it up as a network extension and began back-up.
    It estimated 4 hours so I left it run. After 10 hours I noticed it had stopped backing up but had not back up to the time capsule. So I tried again and it just got stuck on Calculating Time Remaining. I reset the capsule a few times and have set it up as instructed. The same has happened each time.
    It backs up about 17kb of info and then freezes with Calculating time remaining below the progress bar.
    Anyone any ideas?
    Thanks

    Network extension sounds onimous.. is this wireless extension.. it is super bad for large TM backups..
    Always do the first backup direct by ethernet to the TC even if it has to be in full isolation.
    Stalling at 17kb might be just the wireless having issues. Or it can be a corruption in a file.
    Pondini is our source of all things Time Machine.. and trouble shooting it.
    http://pondini.org/TM/Troubleshooting.html
    A1.. install the widget so you have access to the TM logs.. what the heck it is doing.
    A4. if you upgrade installed OS.. do a reset of TM and start over.
    A5 verify the disk.
    C9 watch out for network names that are over long and over complex.. especially with Mavericks. It is hopeless.
    I do recommend using a USB connected drive.. to do a first backup it is often the easy way.
    Much faster and more reliable than over network.

  • TS1630 My iphone4 speakers will only work when I receive a call or factime, but for nothing else. Why?

    My Speakers on my iphone4 will only work when I receive a call or facetime, and are muffled when an alarm goes off. Other than that, I have absolutely no sound from anything- text, music, videos, games, etc. UNLESS I use headphone. My phone will vibrate with text messages, though. When I try to turn up the volume on the side, it doesn't register any bars- the space for the volume boxes is blank. Also, there is no volume bar in my music when I try to turn up the volume. I have tried restarting my phone numerous times, I have also checked and rechecked the switch on the side to no avail. Does anyone have any troubleshooting ideas or know what might cause this?

    I tried this and noticed a little green inside the charging port. I panicked thinking it was corrupt, but found out if you lighting moisten the toothbrush with alcohol and gently scrub (with the power off) you can remove the green. I started inspecting one of our charging adapters, which had been giving us trouble, and it was very green inside. Not sure if it can transfer from one to the other?
    BUT now I have sound! Thanks for your suggestion, it helped!

  • Time caspule only works when connected through my dLink router first

    I have a dlink router that was always my network router in my home. I hooked up a time capusle from the lan output of the dlink into the internet input port on the time capsule and it works fine. The time capsule and dlink are both wifi hostpots. When I connect my time capsule from my modem direct without the dlink the LED will not turn green. WHy is this and how do I remedy this.
    Thanks
    Colin

    The easiest way is to "hard reset" the Time Capsule and reconfigure it using AirPort Utility.
    Make sure it is connected to the modem first. Remember to power down the modem before changing its connections.
    To "hard reset" the TC: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.
    This will not affect your backups. You might need to re-select the TC's backup disk in Time Machine's Preferences, but your existing backups will not be lost.
    Manuals:
    4th gen (802.11n) TC:
    http://manuals.info.apple.com/MANUALS/1000/MA1575/en_US/time_capsule_4th_gen_set up.pdf
    5th gen (802.11ac) TC:
    http://manuals.info.apple.com/MANUALS/1000/MA1645/en_US/airport_time_capsule_802 11ac_setup.pdf

  • AirPort Time Capsule not working.

    Tried hard and factory reset but stays amber. It turns green for a second when it gets plugged in but turns amber again. Also, unplugged internet and time capsule to try and reset it but nothing changed.  It is not being recognized in my airport utility as a base station but it shows up as my time capsule in the airport utility with a yellow triangle and ! in it. When I open my time machine preferences it's not there.  Any other suggestions?

    Solid amber means it is dead.. the hard disk is most likely cause but it can also be the power supply or combo of both..
    The Gen2 TC is now well past useby date.. buy another one..
    You can repair it but the cost is higher than the result is worth.. Gen2 used a WD black drive and they seem to crash out about now.. so it likely has a dead disk .. you can open it and remove the disk.. the TC will then work as an airport extreme Gen3.. and even the disk might test OK.. but your internal power supply no longer can power it.. if however when you start up you hear the disk noises of death.. well it is more likely ended its life.. !!

Maybe you are looking for

  • Script error for IE7 on WD Abap development

    Hi, My browser is IE 7.0. I'm developing wdb dynpro abap application. When i select a view and press Show/Hide Layout Preview, script error occures and ie error page is displayed. How can i solve this problem? Thanks.

  • Code 5 error when downloading smartprint

    Like other users when attempting to download Smartprint, I get as far as "Configuration Setting" but then am told "an unexpected error has occurred- error code 5".  I cannot find any infomation regarding Error 5 in HP Support pages. that would correc

  • STMS is NOT WORKING

    Dear All, My transport process is not working properly when i import the transport request my transport is stuck on truck icon , but my transport impact is proceeded. but my transport request is stuck on truck icon not goes yellow what i do that my s

  • Auto-update and Specific version with OBJECT...CLASSID=...

    We're deploying an applet, and want to be sure to use a specific version of the JRE. So far we've been using 1.4.2 without problems, and now its time to support 1.5.0 (5.0). We intend to do this with <object classid="clsid:CAFEEFAC-0015-0000-0000-ABC

  • Running FC 4.5 HD with QT 7.02 7.03

    Any issues with QT 7.02 or 7.03 running with FC 4.5HD?