My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW
My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW
Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.
Similar Messages
-
I am trying to import from the camera into an I-MAC. I'm told the I-mac does not have the firewire port, but has thunderbolt. Is the only way to get video from the camera via a firewire port? Is someone giving me bad information as to the firewire port not being on the I-MAC? The camera is not being recognized. Thanks in advance.
Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ -
So yeah...last night I was checking out my iPod (bored at the in-laws) and all of a sudden the screen went blank and the only thing I can get it to do is have the black screen w/ the white apple logo on it. It won't turn on, doesn't give the the option to power down, it won't charge, AND it's NOT being recognized when I plug it into my computer. Not by iTunes OR my computer. I've tried holding down the top button and the home button at the same time...nothing. And since it's not being recognized on my computer, I cannot restart it or go back to factory settings. Someone please help! I've had it for 18 months so the warranty is no longer valid and I don't know how to fix it. THANK YOU in advance!
- I would try placing the iPod in recovery mode and then see if iTunes will see the iPod. try both with the iPod not connected to the computer and with it connect. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next see if placing the the iPod in DFU mode will make it visible
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Having a problem with the DVD drive not being recognized by the computer
Compaq Presario CQ60-215DX NOTEBOOK PC, WINDOWS VISTA, Error 10 when trying to reinstall the driver, says cannot start.
I went thru the HP troubleshooting and it said to see the mfg of drive to solve problem! I finally bought a new DVD drive P/N498479-001 for replacement . uninstalled the old drive & then reinstalled the new drive , restarted the computer & it still will not recognize the DVD player! Same error code, same problem. The problem started when I tried to play a CD that appeared to be scratched pretty badly, however my desk top played the CD with out problems? When you click on "computer" the drive does not show up!
I did install a new router a couple of days before this happened, but I am using a data cable to it, so that should not be a problem. Any Ideas?Apple has moved on from Firewire and the current iMacs (and most MBPs) have Thunderbolt, USB3 and USB2.
There are Firewire toThunderbolt adaptors. Here's one. You also want a four pin to nine pin FW cable to run from your camera to the adaptor.
Russ -
Could someone please help me
All purchases through iTunes are locked to the Apple id used to purchase them ( the original owner )
No way of transferring to another id, ever -
I am trying to update our Adobe Reader and Acrobat Pro to 11.0.10 using the default MSP packages with SolarWinds Patch Manager. All of the systems keep reporting as 'NOT APPLICABLE'. All of the workstations have Reader11.0.09, with about 10% still on 11.0.08 (due to the fact that the reader 11.0.09 package only patched about 2/3 of the systems). All systems that have Acrobat Pro are 11.0.09.
In SolarWinds I am using the "Adobe Systems, Inc. Packages" node.
Adobe Systems Acrobat 11 Catalog
Adobe Systems Reader 11 Catalog
and the SW Patch Manager downloads the msp's straight from Adobe.
I have checked the msp's manually and they will update at least back to 11.0.07 in Reader, and 11.0.0 in Acrobat Pro. (I had an old stand alone system that still had Reader 11.0.07, and I did a new install of Pro and went straight to update 11.0.10)
The SolarWinds Tech said, "Okay. That content is produced by Adobe. Any questions concerning applicability logic or diagnosing why a package reports as NotApplicable when that's not expected would need to be directed to Adobe, as they are solely responsible for that content and its behavior".
I am new to SolarWinds Patch Manager, and any help or advice would be greatly appreciated.It sounds like you are attempting to use the SCUP catalogs outside of the MS solution. I can almost guarantee you that Adobe didn't test it if it's not referenced in the ETK: 11 SCCM-SCUP — Enterprise Administration Guide
That being said there "should" be logging available in any deployment solution. Since I am not familiar with Solar-Winds particular solution I can't say if it logs errors and how verbose those logs might be. If you have logs then post the output and the forum members "might" be able to assist you. -
IPads not being recognized when using apple configurator software
I have an iPad cart with 25 iPad's. I am using a MacBook Air and the apple configurator software to try to manage the iPad's. The problem is, only 21 of the 25 iPads will show up in the apple configurator "prepare" section. All of the iPads are not being recognized. When I use a MacBook Pro all 25 iPad's will show. So the problem seems to be with the MacBook Air and/or Apple Configurator. Any suggestions? We have 30 carts total with some having up to 30 iPads so I am trying to find a fix for this.
This seems to be an issue related to the new 2013 MacBook Air models. I've seen it pop up a few times now, and the common factor is always a 2013 MacBook Air.
A "solution" doesn't seem to exist yet. The workaround at this point would be to either use any older Mac to do the syncing, or only connect and sync half of the devices at a time. -
Ipod touch not being recognized by itunes now
i have a friend who has an ipod touch....everything had been going fine for him and then all of a sudden it was not being recognized any more....what caused this? he did say that he had done an update but i'm not sure what version he has....could this possibly be the problem.....does anyone an a fix for this?
I think Apple is having a problem at the moment, my Ipod touch was always fine syncing until the new update! (Even on older itunes version, I could'nt sync since new update came out) It just isnt recognizing the device...
Ive done all that Apple says to do, none of which helps at all, I reckon its thier own side of the problem they need to fix... -
SONY HDR-FX1 Not being recognized in Leopard
Hello, Im trying to connect my SONY HDR-FX1 and import video to Final Cut, but the camera is not being recognized, when I plug it in by firewire, the Camera displays the usual "DV-IN" but nothing happens on the Mac.
Im new to Macs so I have no idea of what to do
Help owuld be greatly AppreciatedIs your tape HDV or just DV? If the camera displays DV in, you have your camera set to play standard DV footage, or downconvert HDV footage. If that's what you want, then you'll need to use one of the DV Easy Setups in FCP.
The important thing to do first, though, is turn all your equipment off. Camera, computer, all.
Make sure the camera is connected to the computer via FireWire first, then turn it on and load your tape.
Now turn on the Mac, and launch FCP. Close any previous projects that may have opened.
Now choose the proper Easy Setup from the FCP menu. This will depend on whether you are NTSC or PAL, and if you have HDV or DV footage.
NOTE: If you have HDV footage, you'll need to make sure the camera is set to play out HDV, and choose an HDV 1080 setup.
Next, open a new untitled project, and open the log and capture window.
Now, your camera should be recognized, and you should be able to control it from the keyboard, and begin to capture. -
Hard Drive not being recognized on my Graphite Clamshell
I have a challenge for anyone. I have a ibook 366(clamshell) that is not recognizing the hd. It was working wonderfully one night I shut it down and the next day I get the flashing question mark. I've tried all of the normal stuff: zap pram, reset nvram tried to use command and s but it didn't go to the programmers screen and all the such. I can boot from a cd but none of the utilities see the hd. I have taken the hd out and connected it to a usb to ide cable that allows me to use it as an external drive and it is recognized without any problem on all of the other macs I connect it to and even on a pc (I know I said the bad word.)Does anyone have any clue what could be the issue. Every thing else seems to work fine. Just the hd is not being recognized. I even put in a different hd. I even formatted the drive using one of my macs that I only have 9.2.2 on and installed a os on it and it still didn't work. The hard drive worked fine and the os with all of its components seemed to be fine. I know it's an older system but it's something that I can let the kids play on and not be concerned with losing any of my files.
I appreciate any help
iBook 366 GraphiteDuane, Thanks for your reply. Is there any way to test this? I am going to try to see if any of the utility disks can recognize the hd. I've tried DW 4.0, the Utility Disks on OS 9, X. I've even tried FWB and a few other tools.
-
ATI RX3850 not being recognized
Hello. I've been having some problems getting my comp to recognize my new ATI rx3850 graphics card. I am using a Dell Dimension C521 with a Dell 0YY821-A00 motherboard. I install the card in a PCI expressx16 slot, but when I open device manager and search the card I cannot find it. I previously used a NVIDIA 7 series card in the slot with no problems. I recently flashed the BIOS and looked at BIOS settings but I cannot figure out why the card is not being recognized. Could the card not be compatible? I would be thankful for any suggestions.
Quote
I previously used a NVIDIA 7 series card in the slot with no problems
Which one exactly?
Dell PCs are cheap because they use cheap and nasty components. My guess is that the PSU isn't up to the job, you were probably lucky that your 7xxx card worked at all. -
HT1414 my ipod is not being recognized on my devices
I am trying to backup my ipod but the device is not being recognized on my computer. When I go into the folder manage devices it is not there. I have gone and hite restore factory settings and that has not helped either.
Try
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
New cable and different USB port?
Runs this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Try on another computer to help determine if computer or iPod problem -
My iphone is not getting recognized in my itunes. When I plug in my ipad, it is recognized. Why is my iphone not being recognized?
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
my 4 digit password is not being recognized on my phone AND i am unable to restore my iphone on my old PC, can an apple store restore my phone and unlock it?
Contact Apple's Customer Support - in the US, (800) 767-2775 to find out. But they will most likely tell you what you already know...it needs to be restored against the computer is was last linked with.
-
My ipad mini is not being recognized by the new iTunes update that just came out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini
I found this is another thread - same issue.
Re: iTunes has stopped working. Why?
Sep 11, 2013 6:07 AM (in response to thurdy)
Resolved!
After contacting Apple, I received a reply from their engineers:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
And that did the trick.
Message was edited by: Stryder777
Maybe you are looking for
-
Songs on iPod are grayed out and purchases in iTunes are missing
So my mom's having some trouble with iTunes- When her 7th gen Nano is plugged into iTunes all of the songs on it are grayed out and unplayable. There are no icons or such that suggest that there is a problem. She has 559 songs on her iPod that she p
-
Web Template Changes not visible after transport from Development to Test
Weu2019ve run into a problem doing web development in BI 7.0 that I suspect someone has seen before and may quickly be able to point us in the correct direction. Changes that are made to web templates in the Web Application Designer are correctly tr
-
Hi friends. I need to create a check print linked with a banking account transfer document. My document has key 40 and 50 to accounts 12*1. Because this is not a payment document, but a document to make a transfer between accounts, I cannot print any
-
How to crack the iphone4 ID/CODE with Edition 7.02 system.thanks a lot.
-
I can't install weblogic server 10.3 found error
I have install to 65% and found error. i want to know why i can't install weblogic server 10.3 (may be error was create by jdk or anything else Please tell me! ) and how many problem that can happen when install weblogic server 10.3 ps. - OS that i