My Apple Macbook Pro is connected by Telstra wireless Broadband to the Internet. Is it possible to connect to a WiFi Printer using Air Express or some other system? to the Internet.
Hi
Can someone please advise if it is possible to connect my Apple MacBook Pro 13.3" to a WiFi Printer, as I am connected to the Internet through Telstra Wireless broadband.
Is it possible by using Airport Express or some other way?
Thanks
1.Power Cycle
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
Safari > Preferences > Extensions
3. Turn off proxies, if selected.
System Preference > Network > Advanced > Proxies Tab
Under "Select Protocol", uncheck any box if selected.
Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.
A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Similar Messages
-
I have an Apple MacBook Pro 1,1 Mac OS X 10.6.8. I have tried to load Native Instruments Guitar Rig 4LE.
It would not load and said the following. System extension cannot be used.
The system extension "/system/library/Extensions/AppleUSBthernetHost.text" was installed improperly and cannot be used.
Please try reinstalling it, or contact the product vendor for an update.
I do not have a copy of the OS X 10.6.8 software. It is second hand so I have no product vendor to contact.
What can I do?You recently updated iTunes to v.11.4? This message has popped up on many a Mac screen when this version was first made available, because this kext was obviously faulty.
You should try to download iTunes 11.4 again from Apple's website: the new version bears the same name, but this kernel extension has been updated, and the issues it was causing are now a thing of the past.
Should solve your problem, too... -
How to connect an MTN usb rotator to an Apple MacBook Pro 13'3
How do i go about connecting my Apple MacBook Pro 13'3 to the interent with an "Huawei Mobile Broadband E367 HSPA+ USB ROTATOR" on the MTN Network
If your USB port is working now, you didn't damage it and have nothing to worry about.
The behavior you saw in your bus-powered Fujitsu drive is normal for a drive that needs more power than the USB port can provide.
If your USB ports ever do shut down, resetting the SMC may bring them back online again quickly and easily. -
Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks. -
I have a new apple MacBook Pro. All my music is on my old computer and my i-pad. What is the easiest way to transfer my music onto my new
computer?apps
If you have an iPod touch or iPhone with iOS 4 or later software, or an iPad, you can use iTunes to transfer files between your computer and an app on your device that supports file sharing.
You might want to do this if, for example, you want to save files you create on your device to your computer, or take files with you so you can use them when you’re away from your computer.
You don’t need to sync your device to transfer files, but your device needs to be connected to your computer.
For information about supported apps, see the documentation for your apps.
Hide
To transfer files from your iPod touch, iPhone, or iPad to your computer:
Connect your iPod touch, iPhone, or iPad to your computer.
In iTunes, select your device (below Devices), and click the Apps button.
Below File Sharing, from the list on the left, select the app on your device that you want to transfer a file from.
From the list on the right, select the file you want to transfer, and click “Save to.”
In the window that appears, select the destination where you want to save the file, and click Choose.
The file is saved to the selected destination on your computer.
SImport music and video already on your computer
If you have audio or video files on your computer, you can import them into iTunes so that they appear in your iTunes library.
Hide
Here are ways to add items from your computer to your iTunes library:
Drag a file or folder from the Finder to the iTunes window.
If you add a folder, all the files it contains are added to your library.
In iTunes, choose File > “Add to Library,” locate a file or folder, and then click Choose.
By default, iTunes places a copy of each audio file in the iTunes folder (Home/Music); the original file remains in the current location. For information about adding an alias to the file (instead of creating a copy), see Add items to your library without copying them to your iTunes folder. -
There was some updayts for my iPad 4 automatically downloaded. After installing it, the iPad began to restart itself every few minutes.
I tryed to update my iPad using iTunes. After connecting to MacBook Pro, where is installed all latest software, iPad is recognised as "iPad", Serial Number: n/a. iTunes run recovery mode, trying to restore iPad firmware, and in the end unknown error occured (3). Tried many times, not results. And now iPad stays only in recovery mode, can't switch it off. How can I solve this problem please?When I restart my iPad the connect to iTunes comes up and stays on until it shuts down again, I have read a report from Apple support suggesting I reinstall iTunes so I might try that again and also your suggestion which i shall also try, but thanks again - rg1547
-
I had to change to a new Apple MacBook Pro. I deauthorized my old computer, authorized the new one and the only media that shows up are items with a cloud. Everything that was downloaded from a cd, including personal movie files, are missing. It's as if my former library is gone. How can I find it again? Or is this just Apples way of screwing with me?
No. Firewire and Ethernet are not the same. Ethernet would be used to connect the computers to your network. A Firewire cable is used to connect the computers directly. They are different ports.
The above shows what an Ethernet port and a Firewire 400 port look like.
These are the plugs used for FW800 on the left and FW400 on the right. -
My new macbook pro 13" just died and i can not turn it on. When i connect the power cort it also does nor charge. No light is commong on. I was working on battery power when it died and the battery was fully charged. What is the problem?
Take it back to the Apple Store for repair since it's still in warranty.
-
Apple MacBook Pro 2011 (10.9.2) - Keyboard behaving very oddly.
Apple MacBook Pro 2011 (10.9.2). My keyboard has started behaving strangely.When you press the certain keys you see other characters as well, such as;
1 - volume up
2 - `
3 - §
4 - ]
5 - [
6 - =
8 - right arrow
9 - up arrow
= - 6
up arrow - 9
right arrow - 8
I’ve tried resetting the NVRAM / PRAM.
Can anyone offer any other suggestions please?Do you have a secondary keyboard you could connect. If that works properly, the other is probably faulty.
Try re-setting the SMC.
Intel-based Macs: Resetting the System Management Controller (SMC)
I don't have this machine but could it be a matter of adjusting the settings of upper or lower case. -
I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.
As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv -
I need to buy a logic board for
Apple MacBook Pro 15" A1286, but i couldn´t find online to buy it where can i get one and if it´s possible if i can have it delivered to my hotelThere are a lot of MacBook Pros with the model # A1286 - which year is your model (e.g., "15-inch Late 2011")?
The only place that I know that you might could score a specific logic board is www.ifixit.com. They may be able to ship to your hotel.
Clinton -
How Does One Perform Initial Installation of T5 S/W on an Intel-based Apple MacBook Pro?
Hello People,
My old Palm Tungsten T5 died suddenly. I managed to secure an open box T5 from Amazon, and I tried to install on my new Apple MacBook Pro. The Palm software did not complete the install apparently due to the lack of a PowerPC processor. Now my new T5 cannot even read my 2GB SD card.
Is there a work-around for installations using Intel processors on Apple computers?
I am running OS X Lion---not Snow Leopard. I just bought this MacBook Pro less than two months ago, and it's the most modern version.
I saw something of the issues others were having with Snow Leopard, and I wondered whether the same issues carried over to Lion.
If necessary, I can dig my old Windows Vista PC out of storage, but I really like using the Apple laptop and would prefer to use that since I normally use the laptop and PDA on the go.
Most respectfully yours,
John
Post relates to: Tungsten T5Here is the info. on MAC OS X. You will need to look for 3rd party options.
Palm Desktop and HotSync Manager are not compatible with Mac OS X 10.6 Snow Leopard. Palm currently has no plans to release future versions of Palm Desktop and HotSync Manager for Palm OS. Customers do have options with third-party solutions such as The Missing Sync for Palm OS from Mark/Space.
Here is the link to Mark/Space for your T5.
http://www.markspace.com/products/palm/palm-sync-software.html?source=picker_palmos_mac
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/common/article/47831_en.html#tungstent5
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
Is my apple MacBook Pro laptop compatible with the new Creative Suite 6 program??
I own a Apple MacBook Pro laptop i currently have the operating system Mac OS X Lion 10.7.5.
my laptop is 13 inch laptop not a 15 inch.
Here is the following info about my apple computer below:
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 384 MB
Software Mac OS X Lion 10.7.5 (11G63)
I want to make sure that the new Creative Suite 6 program is compatiable with my apple
computer before i buy it. my mother last year had brought me the creative suite 5 program
for my Dell Desktop computer however, this computer later on crashed and now i am stuck with
the CS5 program my mother brought because, this version of this program she brought is
only for a desktop computer that has a windows operating system not for a apple
computer that has a mac operating system. At the time my mother nor i knew if, i
would be getting a new apple computer plus, i needed the program for school so that i
could work on homework assignments at home. Now i am currently stuck with the
windows version of the CS5 program which i cannot use at all. I tried to install it onto
my apple laptop many times before but, i only ended up getting a error message saying
that the software I had wouldn't install to the computer for some reason unexplained.
Message was edited by: mzpretty3Hi mzpretty3
Please See the Minimum System requirements for CS6 : http://helpx.adobe.com/x-productkb/policy-pricing/cs6-system-requirements.html -
Apple MacBook Pro 13" 2012 with OS Mountain Lion ships standard with iWorks?
We recently purchased an Apple MacBook Pro 13" new, but from a recommended third party seller because we needed the 2012 version with OS Mountain Lion on it due to Pro Tools incapatability with Maverick. Our Apple consultant told us that all Laptops ship standard with iWorks, but our college student who we purchased it for, says it is not on the laptop & that no software was included except what was already installed on the laptop. Is this typical now with Apple, that you have to go & download your own software from the ITunes App store? And is there a purchaser's code or something showing that there is no additional charge for the software? Please help! These laptops are expensive & should come with the typical Apple tools & software! Also missing iPhoto, is this the same condition or did the seller rip us off?
Just a caution when reading this forum for ML information ...
Over 3 million have downloaded ML. Count the number of "complaints and b*tching" like some in this thread, and you will find the number in the thousands. Simple math will tell you how many users have enough of an issue, real or imagined, to actually say so. Most users who are happy are too busy just using it to say anything.
Now, as a reminder, you can download ML and load it on an external drive. That way you can play with it to see what issues *you* may have based on your specific uses. Of course external drives will respond more slowly than internal drives, but you should know if certain applications do not open.
Also, check this site for applications that simply do not work under ML as "research": http://roaringapps.com/apps:table -
I have apple macbook pro mid 2009 ... my hard disk stopped working and i had mac os 10.6.8 in it ... i bought a new hard disk drive but i didn't have my CD so i installed my friend's mac os 10.5.8 in the new hard disk ... i want to get my previous 10.6.8 back ... hope there is a way to do so
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s MobileMe service; fees and
terms apply.
Maybe you are looking for
-
Upgrade to mySAP ERP 2005 with Unicode
Dear Experts, We are currentl looking at upgrading our 4.5B system to mySAP ERP2005 and have the following issues. 1.Our DB size is currently 2.4 TB and with Unicode we expect more....what should be the best strategy to control the DB size apart from
-
Need to use xsds in PI Mapping
HI, Upto now i used ddf files for mapping in Gentran integration suite. Now i need to xsd files instead of ddf files. How would i convert those ddf files into xsd format. My main task is i want to do same mappings in PI which i did in GIS. Thanks, S
-
Libvirt-lxc No valid cgroup for machine // systemd-nspawn
I am getting mad at trying to set up correctly a arch linux container on my guest with libvirt (LXC left me with a broken set up too). Here are some basic info: - custom kernel with user space set - host up-to-date - guest mounted on my root fs /dahl
-
I just experimented with the new cs5 iPhone packager and noticed that although my little test app just had some movable text the app file size was already 5mb. Can any explain this to me? Am I missing out on some way to reduce the file size. I am
-
Corrupted Files in Some Folders?
All of a sudden, many of the files on my directory are corrupted (?). When I open them I get a error message. For example, attempting to open a JPEG in preview gives... The file "DSC00399.JPG" could not be opened. It may be damaged or use a file form